> For example, in the case of my card which uses the bttv driver, I downloaded > the tarball for the driver, unpacked it, and oftentimes there are a lot of > options presented in various files to get stuff working. > > Would you post the output of lspci -v? lspci-vv might give more info, and just > the lines for the TV card. I'm pretty much doing nothing so can ggogle a bit > to see if I can info for getting sounds working on the card. > > The full output as well for lsmod would be usefull. > > Personally I never got tvtime to work, and have never tried mplayer for > watching TV, but Xawtv works ok, and I've stayed with that. > > Nigel. In windows I use dscaler and as it use its own built in drivers I dont need to install them from cd which comes with the tv card. Unfortunately the card doesn't have audio out, the only way to connect the sound is through cdin on mobo. http://img151.imageshack.us/my.php?image=tvel2.jpg I used to have a cheap Intex tv card, it was connected through audio out - line in, and no problem with sound at all. I could easily configure every tv application. I googled for this issue before i posted the question here on the list, and I see some other people have the same problem but no usefull answers. I use tvtime mostly because it has better deinterlacing metods and better picture quality than the other apps. Here are the outputs you asked for: lspci -vv 01:09.0 Multimedia video controller: Conexant CX23880/1/2/3 PCI Video and Audio Decoder (rev 05) Subsystem: LeadTek Research Inc. Unknown device 6611 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (5000ns min, 13750ns max), Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 22 Region 0: Memory at f8000000 (32-bit, non-prefetchable) [size=16M] Capabilities: [44] Vital Product Data <?> Capabilities: [4c] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: cx8800 Kernel modules: cx8800 lsmod Module Size Used by ipv6 234724 12 snd_seq_dummy 6660 0 snd_seq_oss 32896 0 snd_seq_midi_event 10112 1 snd_seq_oss snd_seq 50256 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event snd_seq_device 10380 3 snd_seq_dummy,snd_seq_oss,snd_seq snd_pcm_oss 40352 0 snd_mixer_oss 17920 1 snd_pcm_oss lp 13348 0 tuner 43936 0 tea5767 9092 1 tuner tda8290 14596 1 tuner tuner_simple 12296 1 tuner mt20xx 15368 1 tuner tea5761 8324 1 tuner cx8800 32264 0 cx88xx 61864 1 cx8800 ir_common 34308 1 cx88xx tveeprom 18192 1 cx88xx nvidia 7099332 24 videodev 29824 2 cx8800,cx88xx v4l1_compat 17668 1 videodev compat_ioctl32 5120 1 cx8800 snd_hda_intel 289052 1 snd_pcm 72068 2 snd_pcm_oss,snd_hda_intel v4l2_common 19200 4 tuner,cx8800,cx88xx,videodev videobuf_dma_sg 14852 2 cx8800,cx88xx snd_timer 22532 2 snd_seq,snd_pcm snd_page_alloc 11528 2 snd_hda_intel,snd_pcm videobuf_core 18436 3 cx8800,cx88xx,videobuf_dma_sg agpgart 30664 1 nvidia snd_hwdep 10756 1 snd_hda_intel i2c_nforce2 9344 0 rtc_cmos 11040 0 button 10000 0 btcx_risc 7944 2 cx8800,cx88xx thermal 16540 0 rtc_core 18696 1 rtc_cmos snd 47716 11 snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_hda_intel,snd_pcm,snd_timer,snd_hwdep k8temp 8192 0 processor 32680 1 thermal rtc_lib 6528 1 rtc_core hwmon 6276 1 k8temp r8169 30468 0 evdev 12672 4 parport_pc 27556 1 soundcore 9824 1 snd parport 34632 2 lp,parport_pc sg 30224 0 ------------------------------------------------------------------------- Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://sourceforge.net/services/buy/index.php _______________________________________________ Alsa-user mailing list Alsa-user@xxxxxxxxxxxxxxxxxxxxx https://lists.sourceforge.net/lists/listinfo/alsa-user
