Kjel, Have you set the DAC levels on the Analog Volume Tab of Envy24 Control? I use a setting of 102 for all four controls DAC 0, DAC 1, ADC 0, and ADC 1. Also on the Patchbay/Router tab an easy test is to route H/W Out 1 (L) to PCM Out 1 and H/W Out 2 (L) to PCM Out 2. Once this works then you can connect the H/W outs to the Digital Mixer and then use the Monitor PCMs tab to set your levels. Please post your results to the list as there are others, like myself, who struggle with this card. Darrell On Saturday 29 March 2008 11:45, Kjel Anderson wrote: > Hello, > > I've just installed an MAudio Audiophile 2496 card on Ubuntu Studio and I > am in need of some assistance. When I run the Envy24 utility, it looks as > if there is sound coming through, but I am getting no sound out. The mixing > controls for this card are much more complicated than with the last card. > Can anyone tell me what the settings for Envy24 should be if I want to hear > some basic audio output? Right now I am trying to figure out if the card is > working or not. In my searches, I did see reference to a "Rev. E" of this > card that is not working with the driver, this card is a "Rev. B". Thank > you in advance for your help, > > Kjel -- Darrell Bellerive ------------------------------------------------------------------------- Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace _______________________________________________ Alsa-user mailing list Alsa-user@xxxxxxxxxxxxxxxxxxxxx https://lists.sourceforge.net/lists/listinfo/alsa-user
