On 24-02-08 00:20, Hans Ekbrand wrote: > I have an old laptop with an ESS 1688, which is working with > snd_es1688. The following setting was used to load it: > > # modprobe snd_es1688 index=0 port=0x220 mpu_port=0x330 irq=5 dma8=1 mpu_irq=9 > > I have two problems with it: > > 1. The recording level is reset to 100% whenever I quit alsamixer, or > starting a new recording. The only way to control it seems to be to > a. start alsamixer > b. start a new recording > c. set the recording level appropriate > > Any hints on what I can try here? Not yet, but I confirm the bug. I'll try and see of I can locate anything. No ETA available. > 2. I cannot use the card in full duplex mode. Is this card able to do > full duplex as other SB16 cards? No, it's only half-duplex. Rene ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ Alsa-user mailing list Alsa-user@xxxxxxxxxxxxxxxxxxxxx https://lists.sourceforge.net/lists/listinfo/alsa-user
