Erik and Chris:
Thank you so much for your replies!
Erick helpfully asked>>
Shawn Replied>>
dmesg has the following output related to my card:
ACPI: PCI Interrupt 0000:06:00.2[B] -> GSI 22 (level, low) -> IRQ 23
firewire_ohci: Added fw-ohci device 0000:06:00.2, OHCI version 1.10
ACPI: PCI Interrupt 0000:06:03.0[A] -> GSI 19 (level, low) -> IRQ 19
firewire_ohci: Added fw-ohci device 0000:06:03.0, OHCI version 1.10
usbcore: registered new interface driver snd-usb-audio
cannot find the slot for index 0 (range 0-0), error: -16
EMU10K1_Audigy: probe of 0000:06:00.0 failed with error -12
firewire_core: created new fw device fw0 (0 config rom retries, S400)
firewire_core: created new fw device fw1 (0 config rom retries, S400)
Erick Helpfully Asked>>
Shawn answered>>
cat /proc/asound/cards only lists my XMidi 2x2 (which isn't supported
by ALSA yet)
0 [XMidi2X2 ]: USB-Audio - E-MU XMidi2X2
E-MU Systems, Inc. E-MU XMidi2X2 at
usb-0000:00:1d.1-2, full speed
the 1212M isn't listed.
Erick Helpfully Asked>> Did you unmute the device?
Shawn Answered>> alsamixer says "No mixer elems found"
Chris Helpfully Said>> The card should work in F7 even though it is
detected as an Audigy.
Shawn Answered>> I think this is ok. It doesn't matter to me what the
card is called if it works. I think there may be something deeper
wrong though...
Shawn Finally Said>>
I'm still a little confused about the firmware issue. It seems like
upgrading my firmware might effect how my card works in Windows XP.
Right now, my card is working in XP and I don't think that I should
break that functionality.
With Much Thanks!!!
Shawn
On Jan 20, 2008 4:50 AM, Erik Slagter <erik@xxxxxxxxxxxx> wrote:
>
> Shawn Eary wrote:
> > I have a 1212M (firewire) that works fine in XP, but FC8 thinks it is
> > a Creative Labs SB Audigy. When I try to play the test sound, I get
> > nothing through the Analog Outputs.
> >
> > Alsa Driver Version 1.0.15
> > Alsa Lib Package 1.0.15-1.fc8
> > Alsa Utils Package 1.0.15-1.fc8
> >
> > Someone said something in an earlier post about the need for an ALSA
> > firmware update, but do I really need to update the firmware on my
> > 1212M just to get it recognized in ALSA?
>
> Start with usual "self-service" steps.
>
> What does "dmesg" say about alsa devices found?
>
> What does "cat /proc/asound/cards" say?
>
> Did you unmute the device?
>
-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
Alsa-user mailing list
Alsa-user@xxxxxxxxxxxxxxxxxxxxx
https://lists.sourceforge.net/lists/listinfo/alsa-user
