Hi, Micah.
No go. I tried switching the Input Source from Mic, Front Mic, Line to
Wav and I still got the same results. No sound recording. Thanks for the
tip.
Any other ideas on how to troubleshoot?
Micah Bucy wrote:
> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA1
>
> As a fellow user of intel's ich7, I just wanted to see if possibly you
> had an option in alsamixer to switch between Line and Mic for Input
> Source, that's the trouble I had at least.
>
> Richi Plana wrote:
>
>> Could I at least get names of people / developers working on this driver
>> that I can direct my questions to?
>>
>> Richi Plana wrote:
>>
>>> Hi,
>>>
>>> For as long as I've had this laptop, I've been having problems with
>>> applications requiring sound recording (ie. ekiga). I've gone through
>>> alsa-driver 1.0.13 and now am at 1.0.14, first with the drivers that
>>> came with Fedora 7, and now with the alsa packages that came with ATRpms
>>> (alsa-kmdl-2.6.21-1.3194.fc7-1.0.14-61.fc7).
>>>
>>> The system is a Gateway CX2724 with the following PCI info:
>>>
>>> lspci -vv -s 00:1b.0
>>> 00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High
>>> Definition Audio Controller (rev 02)
>>> Subsystem: Gateway 2000 Unknown device 0281
>>> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
>>> Stepping- SERR+ FastB2B-
>>> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
>>> <MAbort- >SERR- <PERR-
>>> Latency: 0, Cache Line Size: 64 bytes
>>> Interrupt: pin A routed to IRQ 21
>>> Region 0: Memory at d8240000 (64-bit, non-prefetchable) [size=16K]
>>> Capabilities: [50] Power Management version 2
>>> Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>>> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>>> Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0
>>> Enable-
>>> Address: 0000000000000000 Data: 0000
>>> Capabilities: [70] Express Unknown type IRQ 0
>>> Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
>>> Device: Latency L0s <64ns, L1 <1us
>>> Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
>>> Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
>>> Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
>>> Link: Supported Speed unknown, Width x0, ASPM unknown, Port 0
>>> Link: Latency L0s <64ns, L1 <1us
>>> Link: ASPM Disabled CommClk- ExtSynch-
>>> Link: Speed unknown, Width x0
>>>
>>> When I try "arecord file.wav", I get nothing but a 44 byte file. I've no
>>> ~/.asoundrc file. When I tried the example in aplay(1) (using the
>>> provided .asoundrc):
>>>
>>> arecord -d 10 -f cd -t wav -D copy foobar.wav
>>> will record foobar.wav as a 10-second, CD-quality wave file, using the PCM
>>> "copy" (which might be defined in the user’s .asoundrc file as:
>>> pcm.copy {
>>> type plug
>>> slave {
>>> pcm hw
>>> }
>>> route_policy copy
>>> }
>>>
>>> I get:
>>>
>>> $ arecord -d 10 -f cd -t wav -D copy foobar.wav
>>> Recording WAVE 'foobar.wav' : Signed 16 bit Little Endian, Rate 44100
>>> Hz, Stereo
>>> arecord: pcm_read:1346: read error: Input/output error
>>>
>>> Any help troubleshooting before I open a bug report?
>>> --
>>>
>>> Richi Plana
>>>
>>> -------------------------------------------------------------------------
>>> This SF.net email is sponsored by DB2 Express
>>> Download DB2 Express C - the FREE version of DB2 express and take
>>> control of your XML. No limits. Just data. Click to get it now.
>>> http://sourceforge.net/powerbar/db2/
>>> _______________________________________________
>>> Alsa-user mailing list
>>> Alsa-user@xxxxxxxxxxxxxxxxxxxxx
>>> https://lists.sourceforge.net/lists/listinfo/alsa-user
>>>
>>>
>>>
>> -------------------------------------------------------------------------
>> This SF.net email is sponsored by DB2 Express
>> Download DB2 Express C - the FREE version of DB2 express and take
>> control of your XML. No limits. Just data. Click to get it now.
>> http://sourceforge.net/powerbar/db2/
>> _______________________________________________
>> Alsa-user mailing list
>> Alsa-user@xxxxxxxxxxxxxxxxxxxxx
>> https://lists.sourceforge.net/lists/listinfo/alsa-user
>>
>>
>
> -----BEGIN PGP SIGNATURE-----
> Version: GnuPG v1.4.6 (GNU/Linux)
> Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org
>
> iD8DBQFGk80EpZD9CIMOaggRArjnAKCNRNODHNAD1LshcP4dUBQ93fXndQCdEEX6
> Uooef6Q8fO/wS9FuHPbTKcE=
> =PafS
> -----END PGP SIGNATURE-----
>
> -------------------------------------------------------------------------
> This SF.net email is sponsored by DB2 Express
> Download DB2 Express C - the FREE version of DB2 express and take
> control of your XML. No limits. Just data. Click to get it now.
> http://sourceforge.net/powerbar/db2/
> _______________________________________________
> Alsa-user mailing list
> Alsa-user@xxxxxxxxxxxxxxxxxxxxx
> https://lists.sourceforge.net/lists/listinfo/alsa-user
>
>
-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/
_______________________________________________
Alsa-user mailing list
Alsa-user@xxxxxxxxxxxxxxxxxxxxx
https://lists.sourceforge.net/lists/listinfo/alsa-user
