Dominique Michel <dominique.michel@xxxxxxxxxxxx> wrote:
> Do you have any other sound card as the audigy as an USB sound card ( a
> webcam, whatever...)?
Yes, I have a USB webcam with a microphone. The webcam connected at booting
caused that I could not use the Audigy. Currently the webcam is not
connected at all, though.
On 4/12/07, Lee Revell <rlrevell@xxxxxxxxxxx> wrote:
> If acpi=off fixes the problem then the only solution is to get the
> kernel ACPI maintainers to fix the bug. Upgrading the BIOS also may
> help.
I tried to set acpi=off, yet the kernel could not probably boot with
that option, saying something about the irqpoll option. So I added
acpi=off and irqpoll and that time the kernel booted.
With acpi turned on:
arecord -l shows:
card 0: V8237 [VIA 8237], device 0: VIA 8237 [VIA 8237]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: V8237 [VIA 8237], device 1: VIA 8237 [VIA 8237]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: Audigy [Audigy 1 [Unknown]], device 0: emu10k1 [ADC
Capture/Standard PCM Pla
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: Audigy [Audigy 1 [Unknown]], device 1: emu10k1 mic [Mic Capture]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: Audigy [Audigy 1 [Unknown]], device 2: emu10k1 efx
[Multichannel Capture/PT
Subdevices: 1/1
Subdevice #0: subdevice #0
Recording from hw:1,0 using arecord only wrote the file header.
Recording from hw:1,1 using arecord produced some data but the header,
but printed:
Recording WAVE 'stdin' : Signed 16 bit Little Endian, Rate 48000 Hz, Stereo
Warning: rate is not accurate (requested = 48000Hz, got = 8000Hz)
please, try the plug plugin
Recording from hw:1,2 using arecord exits with an error:
Recording WAVE 'stdin' : Signed 16 bit Little Endian, Rate 48000 Hz, Stereo
arecord: set_params:905: Channels count non available
The interrupts were as follows:
CPU0
0: 1165828 IO-APIC-edge timer
1: 1898 IO-APIC-edge i8042
7: 0 IO-APIC-edge parport0
8: 9218 IO-APIC-edge rtc
9: 1 IO-APIC-fasteoi acpi
12: 6042 IO-APIC-edge i8042
14: 14150 IO-APIC-edge ide0
15: 3463 IO-APIC-edge ide1
16: 0 IO-APIC-fasteoi libata
17: 3523 IO-APIC-fasteoi uhci_hcd:usb1, uhci_hcd:usb2,
uhci_hcd:usb3, uhc
18: 3 IO-APIC-fasteoi ohci1394, eth0
19: 3 IO-APIC-fasteoi bttv0, bt878
20: 114203 IO-APIC-fasteoi nvidia
21: 0 IO-APIC-fasteoi VIA8237
22: 2675 IO-APIC-fasteoi EMU10K1
NMI: 0
LOC: 1165768
ERR: 0
MIS: 0
With acpi turned off:
arecord -l shows:
**** List of CAPTURE Hardware Devices ****
card 0: Audigy [Audigy 1 [Unknown]], device 0: emu10k1 [ADC Capture/Standard PC
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: Audigy [Audigy 1 [Unknown]], device 1: emu10k1 mic [Mic Capture]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: Audigy [Audigy 1 [Unknown]], device 2: emu10k1 efx [Multichannel Captur
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: V8237 [VIA 8237], device 0: VIA 8237 [VIA 8237]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: V8237 [VIA 8237], device 1: VIA 8237 [VIA 8237]
Subdevices: 1/1
Subdevice #0: subdevice #0
Recording from hw:0,0 using arecord only wrote the file header.
Recording from hw:0,1 using arecord produced some data but the header,
but printed:
Recording WAVE 'stdin' : Signed 16 bit Little Endian, Rate 48000 Hz, Stereo
Warning: rate is not accurate (requested = 48000Hz, got = 8000Hz)
please, try the plug plugin
Recording from hw:0,2 using arecord exits with an error:
Recording WAVE 'stdin' : Signed 16 bit Little Endian, Rate 48000 Hz, Stereo
arecord: set_params:905: Channels count non available
The interrupts were as follows:
CPU0
0: 260006 XT-PIC-XT timer
1: 884 XT-PIC-XT i8042
2: 0 XT-PIC-XT cascade
5: 3 XT-PIC-XT eth0, ohci1394
6: 979 XT-PIC-XT ehci_hcd:usb5, VIA8237
8: 1 XT-PIC-XT rtc
9: 44 XT-PIC-XT EMU10K1
10: 0 XT-PIC-XT uhci_hcd:usb3, uhci_hcd:usb4, libata
11: 21326 XT-PIC-XT uhci_hcd:usb1, uhci_hcd:usb2,
bttv0, bt878, nvid
12: 1929 XT-PIC-XT i8042
14: 31 XT-PIC-XT ide0
15: 100013 XT-PIC-XT ide1
NMI: 0
LOC: 259925
ERR: 5555
MIS: 0
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys-and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Alsa-user mailing list
Alsa-user@xxxxxxxxxxxxxxxxxxxxx
https://lists.sourceforge.net/lists/listinfo/alsa-user
