On Fri, 22 Dec 2006, Peter Zubaj wrote: > I have via8233. For me when in alsamixer on "Input Source Select" if > there is "Input2", then it will fail with "Input/Output Error". With > "Input1" it records OK. Try to check this control. Thanks for the suggestions, but unfortunately arecord hangs regardless of the Input Source Select setting here. Regards >>>> Although ALSA seems to be set up fine here (playback is working >>>> flawlessly, see below for setup details), recording does not work. arecord >>>> does not record silence but simply blocks after writing the file header: >>> This usually happens when interrupts are not delivered. >>> Try enabling/disabling ACPI interrupt routing. >> I tried both pci=noacpi and disabling devices that share the same IRQ. No >> change :-(. BTW IRQ count doesn't change when starting arecord. >> Any further tips? >> $ cat /proc/interrupts >> CPU0 >> 0: 27393 XT-PIC timer >> 1: 120 XT-PIC i8042 >> 2: 0 XT-PIC cascade >> 5: 415 XT-PIC VIA8237 >> 9: 0 XT-PIC acpi >> 10: 373 XT-PIC uhci_hcd:usb3, uhci_hcd:usb4, sk98lin, libata >> 11: 4560 XT-PIC uhci_hcd:usb1, uhci_hcd:usb2, nvidia >> 14: 11398 XT-PIC ide0 >> 15: 101 XT-PIC ide1 >> NMI: 0 >> ERR: 2 ------------------------------------------------------------------------- Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys - and earn cash http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV _______________________________________________ Alsa-user mailing list Alsa-user@xxxxxxxxxxxxxxxxxxxxx https://lists.sourceforge.net/lists/listinfo/alsa-user
