can't connect to PDC

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



More errors trying to connect to domain from command line linux:


*[root at ldap home]# net rpc join -d 3 -l -S ldap -U admin*
[2008/06/24 17:40:54,  3] param/loadparm.c:lp_load_ex(8669)
  lp_load_ex: refreshing parameters
[2008/06/24 17:40:54,  3] param/loadparm.c:init_globals(4588)
  Initialising global parameters
[2008/06/24 17:40:54,  3] param/params.c:pm_process(569)
  params.c:pm_process() - Processing configuration file
"/etc/samba/smb.conf"
[2008/06/24 17:40:54,  3] param/loadparm.c:do_section(7334)
  Processing section "[global]"
[2008/06/24 17:40:54,  2] lib/interface.c:add_interface(334)
  added interface eth0 ip=fe80::211:25ff:fe0c:5d8d%eth0
bcast=fe80::ffff:ffff:ff
ff:ffff%eth0 netmask=ffff:ffff:ffff:ffff::
[2008/06/24 17:40:54,  2] lib/interface.c:add_interface(334)
  added interface eth0 ip=192.168.1.12 bcast=192.168.1.255 netmask=
255.255.255.0

[2008/06/24 17:40:54,  3] libsmb/cliconnect.c:cli_start_connection(1632)
  Connecting to host=ldap
[2008/06/24 17:40:54,  3] lib/util_sock.c:open_socket_out(1332)
  Connecting to 192.168.1.12 at port 445
[2008/06/24 17:40:54,  3] rpc_client/cli_pipe.c:rpc_pipe_bind(2086)
  *rpc_pipe_bind: Remote machine ldap pipe \lsarpc fnum 0x750c bind request
retur
ned ok.*
[2008/06/24 17:40:54,  3] rpc_client/cli_pipe.c:rpc_pipe_bind(2086)
  rpc_pipe_bind: Remote machine ldap pipe \NETLOGON fnum 0x750d bind request
ret
urned ok.
[2008/06/24 17:40:54,  3] libsmb/trusts_util.c:just_change_the_password(56)
  just_change_the_password: unable to setup creds (NT_STATUS_ACCESS_DENIED)!
[2008/06/24 17:40:54,  1] utils/net_rpc.c:run_rpc_command(181)
  rpc command function failed! (NT_STATUS_ACCESS_DENIED)
*Enter admin's password:*
[2008/06/24 17:41:03,  3] libsmb/cliconnect.c:cli_start_connection(1632)
  Connecting to host=ldap
[2008/06/24 17:41:03,  3] lib/util_sock.c:open_socket_out(1332)
  Connecting to 192.168.1.12 at port 445
[2008/06/24 17:41:03,  3] libsmb/cliconnect.c:cli_session_setup_spnego(801)
  Doing spnego session setup (blob length=58)
[2008/06/24 17:41:03,  3] libsmb/cliconnect.c:cli_session_setup_spnego(826)
  got OID=1 3 6 1 4 1 311 2 2 10
[2008/06/24 17:41:03,  3] libsmb/cliconnect.c:cli_session_setup_spnego(834)
  got principal=NONE
[2008/06/24 17:41:03,  3] libsmb/ntlmssp.c:ntlmssp_client_challenge(1025)
  Got challenge flags:
[2008/06/24 17:41:03,  3] libsmb/ntlmssp.c:debug_ntlmssp_flags(62)
  Got NTLMSSP neg_flags=0x60898215
[2008/06/24 17:41:03,  3] libsmb/ntlmssp.c:ntlmssp_client_challenge(1047)
  NTLMSSP: Set final flags:
[2008/06/24 17:41:03,  3] libsmb/ntlmssp.c:debug_ntlmssp_flags(62)
  Got NTLMSSP neg_flags=0x60088215
[2008/06/24 17:41:03,  3] libsmb/ntlmssp_sign.c:ntlmssp_sign_init(337)
  NTLMSSP Sign/Seal - Initialising with flags:
[2008/06/24 17:41:03,  3] libsmb/ntlmssp.c:debug_ntlmssp_flags(62)
  Got NTLMSSP neg_flags=0x60088215
[2008/06/24 17:41:03,  3] rpc_client/cli_pipe.c:rpc_pipe_bind(2086)
  rpc_pipe_bind: Remote machine ldap pipe \lsarpc fnum 0x7503 bind request
retur
ned ok.
[2008/06/24 17:41:03,  3] rpc_client/cli_pipe.c:rpc_pipe_bind(2086)
  rpc_pipe_bind: Remote machine ldap pipe \samr fnum 0x7504 bind request
returne
d ok.
*Creation of workstation account failed
Unable to join domain LDAP.*
[2008/06/24 17:41:03,  2] utils/net.c:main(1172)
  return code = 1

Merle Reine
IT Manager Extraordinaire
Email Address: echo zreyr.ervar at tznvy.pbz | perl -pe 'y/a-z/n-za-m/'

On Tue, Jun 24, 2008 at 2:51 AM, yersinia <yersinia.spiros at gmail.com> wrote:

> Likely are two different problem.
>
>>
>> "Transport endpoint is not connected" is a very - very - old XP problem
>> http://wiki.samba.org/index.php/Samba_Myths
>>
>> If you set smb ports = 445 (raw smb aka CIFS port) in smb.conf the message
>> disappear - naturally you are to be sure that
>> you serve only XP o Vista client.
>>
>> For the LDAP problem the message don't tell me so much. So try
>>
>> smbcontrol smbd debug 10
>>
>> and read again the log messages.
>>
>> Regards
>>
>> On Mon, Jun 23, 2008 at 10:56 PM, Merle Reine <merle.reine at gmail.com>
>> wrote:
>>
>>> I know this has been asked a million times but I read all the posts and
>>> none answer my issue so I hope someone will know a fix.
>>>
>>> I have fc9 with samba as PDC connecting to FDS.
>>>
>>> Followed the how-to to the letter but can not get my windows machine to
>>> connect to the domain.
>>>
>>> My domain is :  ldap
>>> Windows machine is in random workgroup not associated with samba at all.
>>>
>>> When I try to add to domain using root and pass (yes, it is setup on
>>> samba server), I get the following:
>>>
>>>
>>> "The following error occured attempting to join the domain "ldap":
>>> A device attached to the system is not functioning.
>>>
>>> in /var/log/samba/samba.log:
>>>
>>> *[2008/06/23 13:53:44,  0] lib/util_sock.c:get_peer_addr_internal(1597)
>>>   getpeername failed. Error was Transport endpoint is not connected
>>> [2008/06/23 13:53:44,  0] lib/util_sock.c:write_data(1059)
>>> [2008/06/23 13:53:44,  0] lib/util_sock.c:get_peer_addr_internal(1597)
>>>   getpeername failed. Error was Transport endpoint is not connected
>>>   write_data: write failure in writing to client 0.0.0.0. Error
>>> Connection reset
>>>  by peer
>>> [2008/06/23 13:53:44,  0] smbd/process.c:srv_send_smb(74)
>>>   Error writing 4 bytes to client. -1. (Transport endpoint is not
>>> connected)
>>> [2008/06/23 13:53:44,  0] lib/util_sock.c:get_peer_addr_internal(1597)
>>>   getpeername failed. Error was Transport endpoint is not connected
>>> [2008/06/23 13:53:44,  0] lib/util_sock.c:write_data(1059)
>>> [2008/06/23 13:53:44,  0] lib/util_sock.c:get_peer_addr_internal(1597)
>>>   getpeername failed. Error was Transport endpoint is not connected
>>>   write_data: write failure in writing to client 0.0.0.0. Error
>>> Connection reset
>>>  by peer
>>> [2008/06/23 13:53:44,  0] smbd/process.c:srv_send_smb(74)
>>>   Error writing 4 bytes to client. -1. (Transport endpoint is not
>>> connected)
>>> [2008/06/23 13:53:44,  0] passdb/pdb_ldap.c:ldapsam_add_sam_account(2276)
>>>   ldapsam_add_sam_account: failed to modify/add user with uid = TEST$ (dn
>>> = uid=
>>> TEST$,ou=Computers,dc=gardenfreshcorp,dc=com)*
>>>
>>>
>>> Any one have any ideas what I am missing?
>>>
>>> Thanks.
>>>
>>>
>>>
>>> Merle Reine
>>> IT Manager Extraordinaire
>>> Email Address: echo zreyr.ervar at tznvy.pbz | perl -pe 'y/a-z/n-za-m/'
>>> --
>>> Fedora-directory-users mailing list
>>> Fedora-directory-users at redhat.com
>>> https://www.redhat.com/mailman/listinfo/fedora-directory-users
>>>
>>>
>>
>
> --
> Fedora-directory-users mailing list
> Fedora-directory-users at redhat.com
> https://www.redhat.com/mailman/listinfo/fedora-directory-users
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.fedoraproject.org/pipermail/389-users/attachments/20080624/f6e66a0b/attachment.html 


[Index of Archives]     [Fedora User Discussion]     [Older Fedora Users]     [Fedora Announce]     [Fedora Package Announce]     [EPEL Announce]     [Fedora News]     [Fedora Cloud]     [Fedora Advisory Board]     [Fedora Education]     [Fedora Security]     [Fedora Scitech]     [Fedora Robotics]     [Fedora Maintainers]     [Fedora Infrastructure]     [Fedora Websites]     [Anaconda Devel]     [Fedora Devel Java]     [Fedora Legacy]     [Fedora Desktop]     [Fedora Fonts]     [ATA RAID]     [Fedora Marketing]     [Fedora Management Tools]     [Fedora Mentors]     [Fedora Package Review]     [Fedora R Devel]     [Fedora PHP Devel]     [Kickstart]     [Fedora Music]     [Fedora Packaging]     [Centos]     [Fedora SELinux]     [Fedora Legal]     [Fedora Kernel]     [Fedora QA]     [Fedora Triage]     [Fedora OCaml]     [Coolkey]     [Virtualization Tools]     [ET Management Tools]     [Yum Users]     [Tux]     [Yosemite News]     [Yosemite Photos]     [Linux Apps]     [Maemo Users]     [Gnome Users]     [KDE Users]     [Fedora Tools]     [Fedora Art]     [Fedora Docs]     [Maemo Users]     [Asterisk PBX]     [Fedora Sparc]     [Fedora Universal Network Connector]     [Fedora ARM]

  Powered by Linux