[PATCH 3/3] block: implement (some of) fallocate for block devices

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



After much discussion, it seems that the fallocate feature flag
FALLOC_FL_ZERO_RANGE maps nicely to SCSI WRITE SAME; and the feature
FALLOC_FL_PUNCH_HOLE maps nicely to the devices that have been
whitelisted for zeroing SCSI UNMAP.  Punch still requires that
FALLOC_FL_KEEP_SIZE is set.  A length that goes past the end of the
device will be clamped to the device size if KEEP_SIZE is set; or will
return -EINVAL if not.  Both start and length must be aligned to the
device's logical block size.

Since the semantics of fallocate are fairly well established already,
wire up the two pieces.  The other fallocate variants (collapse range,
insert range, and allocate blocks) are not supported.

v2: Incorporate feedback from Christoph & Linus.  Tentatively add
a requirement that the fallocate arguments be aligned to logical block
size, and put in a few XXX comments ahead of LSF discussion.

v3: Forward port to 4.7.

Signed-off-by: Darrick J. Wong <darrick.wong@xxxxxxxxxx>
---
 fs/block_dev.c |   84 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 fs/open.c      |    3 +-
 2 files changed, 86 insertions(+), 1 deletion(-)


diff --git a/fs/block_dev.c b/fs/block_dev.c
index c3cdde8..4df3fc8 100644
--- a/fs/block_dev.c
+++ b/fs/block_dev.c
@@ -30,6 +30,7 @@
 #include <linux/cleancache.h>
 #include <linux/dax.h>
 #include <linux/badblocks.h>
+#include <linux/falloc.h>
 #include <asm/uaccess.h>
 #include "internal.h"
 
@@ -1786,6 +1787,88 @@ static const struct address_space_operations def_blk_aops = {
 	.is_dirty_writeback = buffer_check_dirty_writeback,
 };
 
+#define	BLKDEV_FALLOC_FL_SUPPORTED					\
+		(FALLOC_FL_KEEP_SIZE | FALLOC_FL_PUNCH_HOLE |		\
+		 FALLOC_FL_ZERO_RANGE | FALLOC_FL_NO_HIDE_STALE)
+
+static long blkdev_fallocate(struct file *file, int mode, loff_t start,
+			     loff_t len)
+{
+	struct block_device *bdev = I_BDEV(bdev_file_inode(file));
+	struct request_queue *q = bdev_get_queue(bdev);
+	struct address_space *mapping;
+	loff_t end = start + len - 1;
+	loff_t isize;
+	int error;
+
+	/* Fail if we don't recognize the flags. */
+	if (mode & ~BLKDEV_FALLOC_FL_SUPPORTED)
+		return -EOPNOTSUPP;
+
+	/* Don't go off the end of the device. */
+	isize = i_size_read(bdev->bd_inode);
+	if (start >= isize)
+		return -EINVAL;
+	if (end > isize) {
+		if (mode & FALLOC_FL_KEEP_SIZE) {
+			len = isize - start;
+			end = start + len - 1;
+		} else
+			return -EINVAL;
+	}
+
+	/*
+	 * Don't allow IO that isn't aligned to logical block size.
+	 */
+	if ((start | len) & (bdev_logical_block_size(bdev) - 1))
+		return -EINVAL;
+
+	/* Invalidate the page cache, including dirty pages. */
+	mapping = bdev->bd_inode->i_mapping;
+	truncate_inode_pages_range(mapping, start, end);
+
+	switch (mode) {
+	case FALLOC_FL_ZERO_RANGE:
+	case FALLOC_FL_ZERO_RANGE | FALLOC_FL_KEEP_SIZE:
+		error = blkdev_issue_zeroout(bdev, start >> 9, len >> 9,
+					    GFP_KERNEL, false);
+		if (error)
+			return error;
+		break;
+	case FALLOC_FL_PUNCH_HOLE | FALLOC_FL_KEEP_SIZE:
+		/* Only punch if the device can do zeroing discard. */
+		if (!blk_queue_discard(q) || !q->limits.discard_zeroes_data)
+			return -EOPNOTSUPP;
+		error = blkdev_issue_discard(bdev, start >> 9, len >> 9,
+					     GFP_KERNEL, 0);
+		if (error)
+			return error;
+		break;
+	case FALLOC_FL_PUNCH_HOLE | FALLOC_FL_KEEP_SIZE | FALLOC_FL_NO_HIDE_STALE:
+		/*
+		 * XXX: a well known search engine vendor interprets this
+		 * flag (in other circumstances) to mean "I don't care if
+		 * we can read stale contents later".  Is it appropriate
+		 * to wire this up to the non-zeroing discard?
+		 */
+		error = blkdev_issue_discard(bdev, start >> 9, len >> 9,
+					     GFP_KERNEL, 0);
+		if (error)
+			return error;
+		break;
+	default:
+		return -EOPNOTSUPP;
+	}
+
+	/*
+	 * Invalidate again; if someone wandered in and dirtied a page,
+	 * the caller will be given -EBUSY;
+	 */
+	return invalidate_inode_pages2_range(mapping,
+					     start >> PAGE_SHIFT,
+					     end >> PAGE_SHIFT);
+}
+
 const struct file_operations def_blk_fops = {
 	.open		= blkdev_open,
 	.release	= blkdev_close,
@@ -1800,6 +1883,7 @@ const struct file_operations def_blk_fops = {
 #endif
 	.splice_read	= generic_file_splice_read,
 	.splice_write	= iter_file_splice_write,
+	.fallocate	= blkdev_fallocate,
 };
 
 int ioctl_by_bdev(struct block_device *bdev, unsigned cmd, unsigned long arg)
diff --git a/fs/open.c b/fs/open.c
index 4fd6e25..01b6092 100644
--- a/fs/open.c
+++ b/fs/open.c
@@ -289,7 +289,8 @@ int vfs_fallocate(struct file *file, int mode, loff_t offset, loff_t len)
 	 * Let individual file system decide if it supports preallocation
 	 * for directories or not.
 	 */
-	if (!S_ISREG(inode->i_mode) && !S_ISDIR(inode->i_mode))
+	if (!S_ISREG(inode->i_mode) && !S_ISDIR(inode->i_mode) &&
+	    !S_ISBLK(inode->i_mode))
 		return -ENODEV;
 
 	/* Check for wrap through zero too */

_______________________________________________
xfs mailing list
xfs@xxxxxxxxxxx
http://oss.sgi.com/mailman/listinfo/xfs



[Index of Archives]     [Linux XFS Devel]     [Linux Filesystem Development]     [Filesystem Testing]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux