Move general topology functions from xfs_mkfs to new topology
collection in libxcmd.
Signed-off-by: Bill O'Donnell <billodo@xxxxxxxxxx>
---
include/Makefile | 1 +
include/libxcmd.h | 56 +++++++++
libxcmd/Makefile | 2 +-
libxcmd/topology.c | 342 +++++++++++++++++++++++++++++++++++++++++++++++++++++
mkfs/Makefile | 2 +-
mkfs/xfs_mkfs.c | 327 +-------------------------------------------------
6 files changed, 402 insertions(+), 328 deletions(-)
create mode 100644 include/libxcmd.h
create mode 100644 libxcmd/topology.c
diff --git a/include/Makefile b/include/Makefile
index 5fb443a..36a9741 100644
--- a/include/Makefile
+++ b/include/Makefile
@@ -20,6 +20,7 @@ include $(TOPDIR)/include/builddefs
LIBHFILES = libxfs.h \
libxlog.h \
+ libxcmd.h \
atomic.h \
bitops.h \
cache.h \
diff --git a/include/libxcmd.h b/include/libxcmd.h
new file mode 100644
index 0000000..e8d2ffc
--- /dev/null
+++ b/include/libxcmd.h
@@ -0,0 +1,56 @@
+/*
+ * Copyright (c) 2000-2005 Silicon Graphics, Inc.
+ * All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it would be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write the Free Software Foundation,
+ * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#ifndef __LIBXCMD_H__
+#define __LIBXCMD_H__
+
+#include "libxfs.h"
+#include <sys/time.h>
+
+/*
+ * Device topology information.
+ */
+typedef struct fs_topology {
+ int dsunit; /* stripe unit - data subvolume */
+ int dswidth; /* stripe width - data subvolume */
+ int rtswidth; /* stripe width - rt subvolume */
+ int lsectorsize; /* logical sector size &*/
+ int psectorsize; /* physical sector size */
+} fs_topology_t;
+
+extern void
+get_topology(
+ libxfs_init_t *xi,
+ struct fs_topology *ft,
+ int force_overwrite);
+
+extern void
+calc_default_ag_geometry(
+ int blocklog,
+ __uint64_t dblocks,
+ int multidisk,
+ __uint64_t *agsize,
+ __uint64_t *agcount);
+
+extern int
+check_overwrite(
+ const char *device);
+
+
+
+#endif /* __LIBXCMD_H__ */
diff --git a/libxcmd/Makefile b/libxcmd/Makefile
index 7701ed9..aab8d6d 100644
--- a/libxcmd/Makefile
+++ b/libxcmd/Makefile
@@ -10,7 +10,7 @@ LT_CURRENT = 0
LT_REVISION = 0
LT_AGE = 0
-CFILES = command.c input.c paths.c projects.c help.c quit.c
+CFILES = command.c input.c paths.c projects.c help.c quit.c topology.c
ifeq ($(HAVE_GETMNTENT),yes)
LCFLAGS += -DHAVE_GETMNTENT
diff --git a/libxcmd/topology.c b/libxcmd/topology.c
new file mode 100644
index 0000000..8b0276a
--- /dev/null
+++ b/libxcmd/topology.c
@@ -0,0 +1,342 @@
+/*
+ * Copyright (c) 2000-2001,2005 Silicon Graphics, Inc.
+ * All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it would be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write the Free Software Foundation,
+ * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include "libxfs.h"
+#include "libxcmd.h"
+#ifdef ENABLE_BLKID
+# include <blkid/blkid.h>
+#endif /* ENABLE_BLKID */
+#include "xfs_multidisk.h"
+
+#define TERABYTES(count, blog) ((__uint64_t)(count) << (40 - (blog)))
+#define GIGABYTES(count, blog) ((__uint64_t)(count) << (30 - (blog)))
+#define MEGABYTES(count, blog) ((__uint64_t)(count) << (20 - (blog)))
+
+void
+calc_default_ag_geometry(
+ int blocklog,
+ __uint64_t dblocks,
+ int multidisk,
+ __uint64_t *agsize,
+ __uint64_t *agcount)
+{
+ __uint64_t blocks = 0;
+ int shift = 0;
+
+ /*
+ * First handle the high extreme - the point at which we will
+ * always use the maximum AG size.
+ *
+ * This applies regardless of storage configuration.
+ */
+ if (dblocks >= TERABYTES(32, blocklog)) {
+ blocks = XFS_AG_MAX_BLOCKS(blocklog);
+ goto done;
+ }
+
+ /*
+ * For a single underlying storage device over 4TB in size
+ * use the maximum AG size. Between 128MB and 4TB, just use
+ * 4 AGs and scale up smoothly between min/max AG sizes.
+ */
+ if (!multidisk) {
+ if (dblocks >= TERABYTES(4, blocklog)) {
+ blocks = XFS_AG_MAX_BLOCKS(blocklog);
+ goto done;
+ } else if (dblocks >= MEGABYTES(128, blocklog)) {
+ shift = XFS_NOMULTIDISK_AGLOG;
+ goto calc_blocks;
+ }
+ }
+
+ /*
+ * For the multidisk configs we choose an AG count based on the number
+ * of data blocks available, trying to keep the number of AGs higher
+ * than the single disk configurations. This makes the assumption that
+ * larger filesystems have more parallelism available to them.
+ */
+ shift = XFS_MULTIDISK_AGLOG;
+ if (dblocks <= GIGABYTES(512, blocklog))
+ shift--;
+ if (dblocks <= GIGABYTES(8, blocklog))
+ shift--;
+ if (dblocks < MEGABYTES(128, blocklog))
+ shift--;
+ if (dblocks < MEGABYTES(64, blocklog))
+ shift--;
+ if (dblocks < MEGABYTES(32, blocklog))
+ shift--;
+
+ /*
+ * If dblocks is not evenly divisible by the number of
+ * desired AGs, round "blocks" up so we don't lose the
+ * last bit of the filesystem. The same principle applies
+ * to the AG count, so we don't lose the last AG!
+ */
+calc_blocks:
+ ASSERT(shift >= 0 && shift <= XFS_MULTIDISK_AGLOG);
+ blocks = dblocks >> shift;
+ if (dblocks & xfs_mask32lo(shift)) {
+ if (blocks < XFS_AG_MAX_BLOCKS(blocklog))
+ blocks++;
+ }
+done:
+ *agsize = blocks;
+ *agcount = dblocks / blocks + (dblocks % blocks != 0);
+}
+
+/*
+ * Check for existing filesystem or partition table on device.
+ * Returns:
+ * 1 for existing fs or partition
+ * 0 for nothing found
+ * -1 for internal error
+ */
+#ifdef ENABLE_BLKID
+int
+check_overwrite(
+ const char *device)
+{
+ const char *type;
+ blkid_probe pr = NULL;
+ int ret;
+ int fd;
+ long long size;
+ int bsz;
+
+ if (!device || !*device)
+ return 0;
+
+ ret = -1; /* will reset on success of all setup calls */
+
+ fd = open(device, O_RDONLY);
+ if (fd < 0)
+ goto out;
+ platform_findsizes((char *)device, fd, &size, &bsz);
+ close(fd);
+
+ /* nothing to overwrite on a 0-length device */
+ if (size == 0) {
+ ret = 0;
+ goto out;
+ }
+
+ pr = blkid_new_probe_from_filename(device);
+ if (!pr)
+ goto out;
+
+ ret = blkid_probe_enable_partitions(pr, 1);
+ if (ret < 0)
+ goto out;
+
+ ret = blkid_do_fullprobe(pr);
+ if (ret < 0)
+ goto out;
+
+ /*
+ * Blkid returns 1 for nothing found and 0 when it finds a signature,
+ * but we want the exact opposite, so reverse the return value here.
+ *
+ * In addition print some useful diagnostics about what actually is
+ * on the device.
+ */
+ if (ret) {
+ ret = 0;
+ goto out;
+ }
+
+ if (!blkid_probe_lookup_value(pr, "TYPE", &type, NULL)) {
+ fprintf(stderr,
+ _("%s: %s appears to contain an existing "
+ "filesystem (%s).\n"), progname, device, type);
+ } else if (!blkid_probe_lookup_value(pr, "PTTYPE", &type, NULL)) {
+ fprintf(stderr,
+ _("%s: %s appears to contain a partition "
+ "table (%s).\n"), progname, device, type);
+ } else {
+ fprintf(stderr,
+ _("%s: %s appears to contain something weird "
+ "according to blkid\n"), progname, device);
+ }
+ ret = 1;
+out:
+ if (pr)
+ blkid_free_probe(pr);
+ if (ret == -1)
+ fprintf(stderr,
+ _("%s: probe of %s failed, cannot detect "
+ "existing filesystem.\n"), progname, device);
+ return ret;
+}
+
+static void blkid_get_topology(
+ const char *device,
+ int *sunit,
+ int *swidth,
+ int *lsectorsize,
+ int *psectorsize,
+ int force_overwrite)
+{
+
+ blkid_topology tp;
+ blkid_probe pr;
+ unsigned long val;
+ struct stat statbuf;
+
+ /* can't get topology info from a file */
+ if (!stat(device, &statbuf) && S_ISREG(statbuf.st_mode)) {
+ fprintf(stderr,
+ _("%s: Warning: trying to probe topology of a file %s!\n"),
+ progname, device);
+ return;
+ }
+
+ pr = blkid_new_probe_from_filename(device);
+ if (!pr)
+ return;
+
+ tp = blkid_probe_get_topology(pr);
+ if (!tp)
+ goto out_free_probe;
+
+ val = blkid_topology_get_logical_sector_size(tp);
+ *lsectorsize = val;
+ val = blkid_topology_get_physical_sector_size(tp);
+ *psectorsize = val;
+ val = blkid_topology_get_minimum_io_size(tp);
+ *sunit = val;
+ val = blkid_topology_get_optimal_io_size(tp);
+ *swidth = val;
+
+ /*
+ * If the reported values are the same as the physical sector size
+ * do not bother to report anything. It will only cause warnings
+ * if people specify larger stripe units or widths manually.
+ */
+ if (*sunit == *psectorsize || *swidth == *psectorsize) {
+ *sunit = 0;
+ *swidth = 0;
+ }
+
+ /*
+ * Blkid reports the information in terms of bytes, but we want it in
+ * terms of 512 bytes blocks (only to convert it to bytes later..)
+ */
+ *sunit = *sunit >> 9;
+ *swidth = *swidth >> 9;
+
+ if (blkid_topology_get_alignment_offset(tp) != 0) {
+ fprintf(stderr,
+ _("warning: device is not properly aligned %s\n"),
+ device);
+
+ if (!force_overwrite) {
+ fprintf(stderr,
+ _("Use -f to force usage of a misaligned device\n"));
+
+ exit(EXIT_FAILURE);
+ }
+ /* Do not use physical sector size if the device is misaligned */
+ *psectorsize = *lsectorsize;
+ }
+
+ blkid_free_probe(pr);
+ return;
+
+out_free_probe:
+ blkid_free_probe(pr);
+ fprintf(stderr,
+ _("warning: unable to probe device topology for device %s\n"),
+ device);
+}
+#else /* ifdef ENABLE_BLKID */
+/*
+ * Without blkid, we can't do a good check for signatures.
+ * So instead of some messy attempts, just disable any checks
+ * and always return 'nothing found'.
+ */
+# warning BLKID is disabled, so signature detection and block device\
+ access are not working!
+int
+check_overwrite(
+ const char *device)
+{
+ return 1;
+}
+
+static void blkid_get_topology(
+ const char *device,
+ int *sunit,
+ int *swidth,
+ int *lsectorsize,
+ int *psectorsize,
+ int force_overwrite)
+{
+ /*
+ * Shouldn't make any difference (no blkid = no block device access),
+ * but make sure this dummy replacement returns with at least some
+ * sanity.
+ */
+ *lsectorsize = *psectorsize = 512;
+}
+
+#endif /* ENABLE_BLKID */
+
+void get_topology(
+ libxfs_init_t *xi,
+ struct fs_topology *ft,
+ int force_overwrite)
+{
+ struct stat statbuf;
+ char *dfile = xi->volname ? xi->volname : xi->dname;
+
+ /*
+ * If our target is a regular file, use platform_findsizes
+ * to try to obtain the underlying filesystem's requirements
+ * for direct IO; we'll set our sector size to that if possible.
+ */
+ if (xi->disfile ||
+ (!stat(dfile, &statbuf) && S_ISREG(statbuf.st_mode))) {
+ int fd;
+ int flags = O_RDONLY;
+ long long dummy;
+
+ /* with xi->disfile we may not have the file yet! */
+ if (xi->disfile)
+ flags |= O_CREAT;
+
+ fd = open(dfile, flags, 0666);
+ if (fd >= 0) {
+ platform_findsizes(dfile, fd, &dummy, &ft->lsectorsize);
+ close(fd);
+ ft->psectorsize = ft->lsectorsize;
+ } else
+ ft->psectorsize = ft->lsectorsize = BBSIZE;
+ } else {
+ blkid_get_topology(dfile, &ft->dsunit, &ft->dswidth,
+ &ft->lsectorsize, &ft->psectorsize,
+ force_overwrite);
+ }
+
+ if (xi->rtname && !xi->risfile) {
+ int sunit, lsectorsize, psectorsize;
+
+ blkid_get_topology(xi->rtname, &sunit, &ft->rtswidth,
+ &lsectorsize, &psectorsize, force_overwrite);
+ }
+}
diff --git a/mkfs/Makefile b/mkfs/Makefile
index 63ba4ec..f0e4ce1 100644
--- a/mkfs/Makefile
+++ b/mkfs/Makefile
@@ -10,7 +10,7 @@ LTCOMMAND = mkfs.xfs
HFILES =
CFILES = maxtrres.c proto.c xfs_mkfs.c
-LLDLIBS += $(LIBBLKID) $(LIBXFS) $(LIBUUID) $(LIBRT) $(LIBPTHREAD)
+LLDLIBS += $(LIBBLKID) $(LIBXFS) $(LIBUUID) $(LIBRT) $(LIBPTHREAD) $(LIBXCMD)
LTDEPENDENCIES += $(LIBXFS)
LLDFLAGS = -static-libtool-libs
diff --git a/mkfs/xfs_mkfs.c b/mkfs/xfs_mkfs.c
index 955dcfd..ad3fd77 100644
--- a/mkfs/xfs_mkfs.c
+++ b/mkfs/xfs_mkfs.c
@@ -22,17 +22,7 @@
# include <blkid/blkid.h>
#endif /* ENABLE_BLKID */
#include "xfs_multidisk.h"
-
-/*
- * Device topology information.
- */
-struct fs_topology {
- int dsunit; /* stripe unit - data subvolume */
- int dswidth; /* stripe width - data subvolume */
- int rtswidth; /* stripe width - rt subvolume */
- int lsectorsize; /* logical sector size &*/
- int psectorsize; /* physical sector size */
-};
+#include "libxcmd.h"
/*
* Prototypes for internal functions.
@@ -777,247 +767,6 @@ calc_stripe_factors(
*lsunit = (int)BTOBBT(lsu);
}
-/*
- * Check for existing filesystem or partition table on device.
- * Returns:
- * 1 for existing fs or partition
- * 0 for nothing found
- * -1 for internal error
- */
-#ifdef ENABLE_BLKID
-static int
-check_overwrite(
- const char *device)
-{
- const char *type;
- blkid_probe pr = NULL;
- int ret;
- int fd;
- long long size;
- int bsz;
-
- if (!device || !*device)
- return 0;
-
- ret = -1; /* will reset on success of all setup calls */
-
- fd = open(device, O_RDONLY);
- if (fd < 0)
- goto out;
- platform_findsizes((char *)device, fd, &size, &bsz);
- close(fd);
-
- /* nothing to overwrite on a 0-length device */
- if (size == 0) {
- ret = 0;
- goto out;
- }
-
- pr = blkid_new_probe_from_filename(device);
- if (!pr)
- goto out;
-
- ret = blkid_probe_enable_partitions(pr, 1);
- if (ret < 0)
- goto out;
-
- ret = blkid_do_fullprobe(pr);
- if (ret < 0)
- goto out;
-
- /*
- * Blkid returns 1 for nothing found and 0 when it finds a signature,
- * but we want the exact opposite, so reverse the return value here.
- *
- * In addition print some useful diagnostics about what actually is
- * on the device.
- */
- if (ret) {
- ret = 0;
- goto out;
- }
-
- if (!blkid_probe_lookup_value(pr, "TYPE", &type, NULL)) {
- fprintf(stderr,
- _("%s: %s appears to contain an existing "
- "filesystem (%s).\n"), progname, device, type);
- } else if (!blkid_probe_lookup_value(pr, "PTTYPE", &type, NULL)) {
- fprintf(stderr,
- _("%s: %s appears to contain a partition "
- "table (%s).\n"), progname, device, type);
- } else {
- fprintf(stderr,
- _("%s: %s appears to contain something weird "
- "according to blkid\n"), progname, device);
- }
- ret = 1;
-out:
- if (pr)
- blkid_free_probe(pr);
- if (ret == -1)
- fprintf(stderr,
- _("%s: probe of %s failed, cannot detect "
- "existing filesystem.\n"), progname, device);
- return ret;
-}
-
-static void blkid_get_topology(
- const char *device,
- int *sunit,
- int *swidth,
- int *lsectorsize,
- int *psectorsize,
- int force_overwrite)
-{
-
- blkid_topology tp;
- blkid_probe pr;
- unsigned long val;
- struct stat statbuf;
-
- /* can't get topology info from a file */
- if (!stat(device, &statbuf) && S_ISREG(statbuf.st_mode)) {
- fprintf(stderr,
- _("%s: Warning: trying to probe topology of a file %s!\n"),
- progname, device);
- return;
- }
-
- pr = blkid_new_probe_from_filename(device);
- if (!pr)
- return;
-
- tp = blkid_probe_get_topology(pr);
- if (!tp)
- goto out_free_probe;
-
- val = blkid_topology_get_logical_sector_size(tp);
- *lsectorsize = val;
- val = blkid_topology_get_physical_sector_size(tp);
- *psectorsize = val;
- val = blkid_topology_get_minimum_io_size(tp);
- *sunit = val;
- val = blkid_topology_get_optimal_io_size(tp);
- *swidth = val;
-
- /*
- * If the reported values are the same as the physical sector size
- * do not bother to report anything. It will only cause warnings
- * if people specify larger stripe units or widths manually.
- */
- if (*sunit == *psectorsize || *swidth == *psectorsize) {
- *sunit = 0;
- *swidth = 0;
- }
-
- /*
- * Blkid reports the information in terms of bytes, but we want it in
- * terms of 512 bytes blocks (only to convert it to bytes later..)
- */
- *sunit = *sunit >> 9;
- *swidth = *swidth >> 9;
-
- if (blkid_topology_get_alignment_offset(tp) != 0) {
- fprintf(stderr,
- _("warning: device is not properly aligned %s\n"),
- device);
-
- if (!force_overwrite) {
- fprintf(stderr,
- _("Use -f to force usage of a misaligned device\n"));
-
- exit(EXIT_FAILURE);
- }
- /* Do not use physical sector size if the device is misaligned */
- *psectorsize = *lsectorsize;
- }
-
- blkid_free_probe(pr);
- return;
-
-out_free_probe:
- blkid_free_probe(pr);
- fprintf(stderr,
- _("warning: unable to probe device topology for device %s\n"),
- device);
-}
-#else /* ifdef ENABLE_BLKID */
-/*
- * Without blkid, we can't do a good check for signatures.
- * So instead of some messy attempts, just disable any checks
- * and always return 'nothing found'.
- */
-# warning BLKID is disabled, so signature detection and block device\
- access are not working!
-static int
-check_overwrite(
- const char *device)
-{
- return 1;
-}
-
-static void blkid_get_topology(
- const char *device,
- int *sunit,
- int *swidth,
- int *lsectorsize,
- int *psectorsize,
- int force_overwrite)
-{
- /*
- * Shouldn't make any difference (no blkid = no block device access),
- * but make sure this dummy replacement returns with at least some
- * sanity.
- */
- *lsectorsize = *psectorsize = 512;
-}
-
-#endif /* ENABLE_BLKID */
-
-static void get_topology(
- libxfs_init_t *xi,
- struct fs_topology *ft,
- int force_overwrite)
-{
- struct stat statbuf;
- char *dfile = xi->volname ? xi->volname : xi->dname;
-
- /*
- * If our target is a regular file, use platform_findsizes
- * to try to obtain the underlying filesystem's requirements
- * for direct IO; we'll set our sector size to that if possible.
- */
- if (xi->disfile ||
- (!stat(dfile, &statbuf) && S_ISREG(statbuf.st_mode))) {
- int fd;
- int flags = O_RDONLY;
- long long dummy;
-
- /* with xi->disfile we may not have the file yet! */
- if (xi->disfile)
- flags |= O_CREAT;
-
- fd = open(dfile, flags, 0666);
- if (fd >= 0) {
- platform_findsizes(dfile, fd, &dummy, &ft->lsectorsize);
- close(fd);
- ft->psectorsize = ft->lsectorsize;
- } else
- ft->psectorsize = ft->lsectorsize = BBSIZE;
- } else {
- blkid_get_topology(dfile, &ft->dsunit, &ft->dswidth,
- &ft->lsectorsize, &ft->psectorsize,
- force_overwrite);
- }
-
- if (xi->rtname && !xi->risfile) {
- int sunit, lsectorsize, psectorsize;
-
- blkid_get_topology(xi->rtname, &sunit, &ft->rtswidth,
- &lsectorsize, &psectorsize, force_overwrite);
- }
-}
-
static void
check_device_type(
const char *name,
@@ -1199,80 +948,6 @@ calc_default_imaxpct(
return 1;
}
-
-void
-calc_default_ag_geometry(
- int blocklog,
- __uint64_t dblocks,
- int multidisk,
- __uint64_t *agsize,
- __uint64_t *agcount)
-{
- __uint64_t blocks = 0;
- int shift = 0;
-
- /*
- * First handle the high extreme - the point at which we will
- * always use the maximum AG size.
- *
- * This applies regardless of storage configuration.
- */
- if (dblocks >= TERABYTES(32, blocklog)) {
- blocks = XFS_AG_MAX_BLOCKS(blocklog);
- goto done;
- }
-
- /*
- * For a single underlying storage device over 4TB in size
- * use the maximum AG size. Between 128MB and 4TB, just use
- * 4 AGs and scale up smoothly between min/max AG sizes.
- */
- if (!multidisk) {
- if (dblocks >= TERABYTES(4, blocklog)) {
- blocks = XFS_AG_MAX_BLOCKS(blocklog);
- goto done;
- } else if (dblocks >= MEGABYTES(128, blocklog)) {
- shift = XFS_NOMULTIDISK_AGLOG;
- goto calc_blocks;
- }
- }
-
- /*
- * For the multidisk configs we choose an AG count based on the number
- * of data blocks available, trying to keep the number of AGs higher
- * than the single disk configurations. This makes the assumption that
- * larger filesystems have more parallelism available to them.
- */
- shift = XFS_MULTIDISK_AGLOG;
- if (dblocks <= GIGABYTES(512, blocklog))
- shift--;
- if (dblocks <= GIGABYTES(8, blocklog))
- shift--;
- if (dblocks < MEGABYTES(128, blocklog))
- shift--;
- if (dblocks < MEGABYTES(64, blocklog))
- shift--;
- if (dblocks < MEGABYTES(32, blocklog))
- shift--;
-
- /*
- * If dblocks is not evenly divisible by the number of
- * desired AGs, round "blocks" up so we don't lose the
- * last bit of the filesystem. The same principle applies
- * to the AG count, so we don't lose the last AG!
- */
-calc_blocks:
- ASSERT(shift >= 0 && shift <= XFS_MULTIDISK_AGLOG);
- blocks = dblocks >> shift;
- if (dblocks & xfs_mask32lo(shift)) {
- if (blocks < XFS_AG_MAX_BLOCKS(blocklog))
- blocks++;
- }
-done:
- *agsize = blocks;
- *agcount = dblocks / blocks + (dblocks % blocks != 0);
-}
-
static void
validate_ag_geometry(
int blocklog,
--
2.5.5
_______________________________________________
xfs mailing list
xfs@xxxxxxxxxxx
http://oss.sgi.com/mailman/listinfo/xfs
