Commit 31f48569c353 ("xfs/030: fix output on newer filesystems") added
more lines to .out file to match the output from XFS with reflink
support, but it broke test on older XFS.
Fix it by introducing new .out file 030.out.reflink.linux to match the
reflink case, so old XFS still compares .out file against 030.out.linux.
In order to do this, a new helper is introduced, _fs_has_reflink()
accepts mount point as argument and returns if the underlying fs
supports reflink or not.
Signed-off-by: Eryu Guan <eguan@xxxxxxxxxx>
---
I didn't test this patch on newer XFS, but it did pass for me on current
4.6-rc1 kernel.
common/reflink | 18 +++
tests/xfs/030 | 12 +-
tests/xfs/030.cfg | 1 +
tests/xfs/030.out.linux | 2 -
tests/xfs/030.out.reflink.linux | 252 ++++++++++++++++++++++++++++++++++++++++
5 files changed, 280 insertions(+), 5 deletions(-)
create mode 100644 tests/xfs/030.out.reflink.linux
diff --git a/common/reflink b/common/reflink
index 4ec390d..bdfc01c 100644
--- a/common/reflink
+++ b/common/reflink
@@ -156,6 +156,24 @@ _cp_reflink() {
cp --reflink=always -p "$file1" "$file2"
}
+# given a mount point and test the underlying fs supports reflink or not
+_fs_has_reflink()
+{
+ if [ -z $1 ] || [ ! -d $1 ]; then
+ echo "Missing mount point argument for _fs_has_reflink()"
+ exit 1
+ fi
+ local src=$1/_fs_has_reflink_testfile
+ local tgt=$src.reflink
+ local ret=0
+
+ echo "reflink test" > $src
+ _cp_reflink $src $tgt >/dev/null 2>&1
+ ret=$?
+ rm -f $src $tgt >/dev/null 2>&1
+ return $ret
+}
+
# Reflink some file1 into file2
_reflink() {
file1="$1"
diff --git a/tests/xfs/030 b/tests/xfs/030
index 33c906c..d171a39 100755
--- a/tests/xfs/030
+++ b/tests/xfs/030
@@ -44,9 +44,7 @@ trap "_cleanup; exit \$status" 0 1 2 3 15
. ./common/rc
. ./common/filter
. ./common/repair
-
-# link correct .out file
-_link_out_file
+. ./common/reflink
# nuke the superblock, AGI, AGF, AGFL; then try repair the damage
#
@@ -90,6 +88,14 @@ else
_notrun "GQuota are enabled, test needs controlled sb recovery"
src/feature -P $SCRATCH_DEV && \
_notrun "PQuota are enabled, test needs controlled sb recovery"
+
+ # link correct .out file
+ features=`_get_os_name`
+ if _fs_has_reflink $SCRATCH_MNT; then
+ features=$feature,reflink
+ fi
+ _link_out_file_named $seqfull.out "$features"
+
_scratch_unmount
fi
clear=""
diff --git a/tests/xfs/030.cfg b/tests/xfs/030.cfg
index 7ffdfc0..1eacdc1 100644
--- a/tests/xfs/030.cfg
+++ b/tests/xfs/030.cfg
@@ -1,2 +1,3 @@
irix: irix
+linux,reflink: reflink.linux
linux: linux
diff --git a/tests/xfs/030.out.linux b/tests/xfs/030.out.linux
index 14b9b35..cf3259f 100644
--- a/tests/xfs/030.out.linux
+++ b/tests/xfs/030.out.linux
@@ -231,8 +231,6 @@ bad agbno AGBNO in agfl, agno 0
bad agbno AGBNO in agfl, agno 0
bad agbno AGBNO in agfl, agno 0
bad agbno AGBNO in agfl, agno 0
-bad agbno AGBNO in agfl, agno 0
-bad agbno AGBNO in agfl, agno 0
- found root inode chunk
Phase 3 - for each AG...
- scan and clear agi unlinked lists...
diff --git a/tests/xfs/030.out.reflink.linux b/tests/xfs/030.out.reflink.linux
new file mode 100644
index 0000000..14b9b35
--- /dev/null
+++ b/tests/xfs/030.out.reflink.linux
@@ -0,0 +1,252 @@
+QA output created by 030
+meta-data=DDEV isize=XXX agcount=N, agsize=XXX blks
+data = bsize=XXX blocks=XXX, imaxpct=PCT
+ = sunit=XXX swidth=XXX, unwritten=X
+naming =VERN bsize=XXX
+log =LDEV bsize=XXX blocks=XXX
+realtime =RDEV extsz=XXX blocks=XXX, rtextents=XXX
+Corrupting sb 0 - setting bits to 0
+Wrote X.XXKb (value 0x0)
+Phase 1 - find and verify superblock...
+bad primary superblock - bad magic number !!!
+
+attempting to find secondary superblock...
+found candidate secondary superblock...
+verified secondary superblock...
+writing modified primary superblock
+sb root inode value INO inconsistent with calculated value INO
+resetting superblock root inode pointer to INO
+sb realtime bitmap inode INO inconsistent with calculated value INO
+resetting superblock realtime bitmap ino pointer to INO
+sb realtime summary inode INO inconsistent with calculated value INO
+resetting superblock realtime summary ino pointer to INO
+Phase 2 - using <TYPEOF> log
+ - zero log...
+ - scan filesystem freespace and inode maps...
+ - found root inode chunk
+Phase 3 - for each AG...
+ - scan and clear agi unlinked lists...
+ - process known inodes and perform inode discovery...
+ - process newly discovered inodes...
+Phase 4 - check for duplicate blocks...
+ - setting up duplicate extent list...
+ - check for inodes claiming duplicate blocks...
+Phase 5 - rebuild AG headers and trees...
+ - reset superblock...
+Phase 6 - check inode connectivity...
+ - resetting contents of realtime bitmap and summary inodes
+ - traversing filesystem ...
+ - traversal finished ...
+ - moving disconnected inodes to lost+found ...
+Phase 7 - verify and correct link counts...
+Note - stripe unit (0) and width (0) fields have been reset.
+Please set with mount -o sunit=<value>,swidth=<value>
+done
+Corrupting agf 0 - setting bits to 0
+Wrote X.XXKb (value 0x0)
+Phase 1 - find and verify superblock...
+Phase 2 - using <TYPEOF> log
+ - zero log...
+ - scan filesystem freespace and inode maps...
+bad magic # 0x0 for agf 0
+bad version # 0 for agf 0
+bad length 0 for agf 0, should be LENGTH
+reset bad agf for ag 0
+bad agbno AGBNO for btbno root, agno 0
+bad agbno AGBNO for btbcnt root, agno 0
+ - found root inode chunk
+Phase 3 - for each AG...
+ - scan and clear agi unlinked lists...
+ - process known inodes and perform inode discovery...
+ - process newly discovered inodes...
+Phase 4 - check for duplicate blocks...
+ - setting up duplicate extent list...
+ - check for inodes claiming duplicate blocks...
+Phase 5 - rebuild AG headers and trees...
+ - reset superblock...
+Phase 6 - check inode connectivity...
+ - resetting contents of realtime bitmap and summary inodes
+ - traversing filesystem ...
+ - traversal finished ...
+ - moving disconnected inodes to lost+found ...
+Phase 7 - verify and correct link counts...
+done
+Corrupting agi 0 - setting bits to 0
+Wrote X.XXKb (value 0x0)
+Phase 1 - find and verify superblock...
+Phase 2 - using <TYPEOF> log
+ - zero log...
+ - scan filesystem freespace and inode maps...
+bad magic # 0x0 for agi 0
+bad version # 0 for agi 0
+bad length # 0 for agi 0, should be LENGTH
+reset bad agi for ag 0
+bad agbno AGBNO for inobt root, agno 0
+root inode chunk not found
+Phase 3 - for each AG...
+ - scan and clear agi unlinked lists...
+ - process known inodes and perform inode discovery...
+ - process newly discovered inodes...
+Phase 4 - check for duplicate blocks...
+ - setting up duplicate extent list...
+ - check for inodes claiming duplicate blocks...
+Phase 5 - rebuild AG headers and trees...
+ - reset superblock...
+Phase 6 - check inode connectivity...
+ - resetting contents of realtime bitmap and summary inodes
+ - traversing filesystem ...
+ - traversal finished ...
+ - moving disconnected inodes to lost+found ...
+Phase 7 - verify and correct link counts...
+done
+Corrupting agfl 0 - setting bits to 0
+Wrote X.XXKb (value 0x0)
+Phase 1 - find and verify superblock...
+Phase 2 - using <TYPEOF> log
+ - zero log...
+ - scan filesystem freespace and inode maps...
+ - found root inode chunk
+Phase 3 - for each AG...
+ - scan and clear agi unlinked lists...
+ - process known inodes and perform inode discovery...
+ - process newly discovered inodes...
+Phase 4 - check for duplicate blocks...
+ - setting up duplicate extent list...
+ - check for inodes claiming duplicate blocks...
+Phase 5 - rebuild AG headers and trees...
+ - reset superblock...
+Phase 6 - check inode connectivity...
+ - resetting contents of realtime bitmap and summary inodes
+ - traversing filesystem ...
+ - traversal finished ...
+ - moving disconnected inodes to lost+found ...
+Phase 7 - verify and correct link counts...
+done
+Corrupting sb 0 - setting bits to -1
+Wrote X.XXKb (value 0xffffffff)
+Phase 1 - find and verify superblock...
+bad primary superblock - bad magic number !!!
+
+attempting to find secondary superblock...
+found candidate secondary superblock...
+verified secondary superblock...
+writing modified primary superblock
+sb root inode value INO inconsistent with calculated value INO
+resetting superblock root inode pointer to INO
+sb realtime bitmap inode INO inconsistent with calculated value INO
+resetting superblock realtime bitmap ino pointer to INO
+sb realtime summary inode INO inconsistent with calculated value INO
+resetting superblock realtime summary ino pointer to INO
+Phase 2 - using <TYPEOF> log
+ - zero log...
+ - scan filesystem freespace and inode maps...
+ - found root inode chunk
+Phase 3 - for each AG...
+ - scan and clear agi unlinked lists...
+ - process known inodes and perform inode discovery...
+ - process newly discovered inodes...
+Phase 4 - check for duplicate blocks...
+ - setting up duplicate extent list...
+ - check for inodes claiming duplicate blocks...
+Phase 5 - rebuild AG headers and trees...
+ - reset superblock...
+Phase 6 - check inode connectivity...
+ - resetting contents of realtime bitmap and summary inodes
+ - traversing filesystem ...
+ - traversal finished ...
+ - moving disconnected inodes to lost+found ...
+Phase 7 - verify and correct link counts...
+Note - stripe unit (0) and width (0) fields have been reset.
+Please set with mount -o sunit=<value>,swidth=<value>
+done
+Corrupting agf 0 - setting bits to -1
+Wrote X.XXKb (value 0xffffffff)
+Phase 1 - find and verify superblock...
+Phase 2 - using <TYPEOF> log
+ - zero log...
+ - scan filesystem freespace and inode maps...
+bad magic # 0xffffffff for agf 0
+bad version # -1 for agf 0
+bad sequence # -1 for agf 0
+bad length -1 for agf 0, should be LENGTH
+flfirst -1 in agf 0 too large (max = MAX)
+fllast -1 in agf 0 too large (max = MAX)
+reset bad agf for ag 0
+freeblk count 1 != flcount -1 in ag 0
+bad agbno AGBNO for btbno root, agno 0
+bad agbno AGBNO for btbcnt root, agno 0
+ - found root inode chunk
+Phase 3 - for each AG...
+ - scan and clear agi unlinked lists...
+ - process known inodes and perform inode discovery...
+ - process newly discovered inodes...
+Phase 4 - check for duplicate blocks...
+ - setting up duplicate extent list...
+ - check for inodes claiming duplicate blocks...
+Phase 5 - rebuild AG headers and trees...
+ - reset superblock...
+Phase 6 - check inode connectivity...
+ - resetting contents of realtime bitmap and summary inodes
+ - traversing filesystem ...
+ - traversal finished ...
+ - moving disconnected inodes to lost+found ...
+Phase 7 - verify and correct link counts...
+done
+Corrupting agi 0 - setting bits to -1
+Wrote X.XXKb (value 0xffffffff)
+Phase 1 - find and verify superblock...
+Phase 2 - using <TYPEOF> log
+ - zero log...
+ - scan filesystem freespace and inode maps...
+bad magic # 0xffffffff for agi 0
+bad version # -1 for agi 0
+bad sequence # -1 for agi 0
+bad length # -1 for agi 0, should be LENGTH
+reset bad agi for ag 0
+bad agbno AGBNO for inobt root, agno 0
+root inode chunk not found
+Phase 3 - for each AG...
+ - scan and clear agi unlinked lists...
+ - process known inodes and perform inode discovery...
+ - process newly discovered inodes...
+Phase 4 - check for duplicate blocks...
+ - setting up duplicate extent list...
+ - check for inodes claiming duplicate blocks...
+Phase 5 - rebuild AG headers and trees...
+ - reset superblock...
+Phase 6 - check inode connectivity...
+ - resetting contents of realtime bitmap and summary inodes
+ - traversing filesystem ...
+ - traversal finished ...
+ - moving disconnected inodes to lost+found ...
+Phase 7 - verify and correct link counts...
+done
+Corrupting agfl 0 - setting bits to -1
+Wrote X.XXKb (value 0xffffffff)
+Phase 1 - find and verify superblock...
+Phase 2 - using <TYPEOF> log
+ - zero log...
+ - scan filesystem freespace and inode maps...
+bad agbno AGBNO in agfl, agno 0
+bad agbno AGBNO in agfl, agno 0
+bad agbno AGBNO in agfl, agno 0
+bad agbno AGBNO in agfl, agno 0
+bad agbno AGBNO in agfl, agno 0
+bad agbno AGBNO in agfl, agno 0
+ - found root inode chunk
+Phase 3 - for each AG...
+ - scan and clear agi unlinked lists...
+ - process known inodes and perform inode discovery...
+ - process newly discovered inodes...
+Phase 4 - check for duplicate blocks...
+ - setting up duplicate extent list...
+ - check for inodes claiming duplicate blocks...
+Phase 5 - rebuild AG headers and trees...
+ - reset superblock...
+Phase 6 - check inode connectivity...
+ - resetting contents of realtime bitmap and summary inodes
+ - traversing filesystem ...
+ - traversal finished ...
+ - moving disconnected inodes to lost+found ...
+Phase 7 - verify and correct link counts...
+done
--
2.5.5
_______________________________________________
xfs mailing list
xfs@xxxxxxxxxxx
http://oss.sgi.com/mailman/listinfo/xfs
