On 1/27/16 10:57 AM, Carlos Maiolino wrote:
> Default quotas are globally set due historical reasons. IRIX only supported user
> and project quotas, and default quota was only applied to user quotas.
>
> In Linux, when a default quota is set, all different quota types inherits the
> same default value.
>
> An user with a quota limit larger than the default quota value, will still be
> limited to the default value because the group quotas also inherits the default
> quotas. Unless the group which the user belongs to have a custom quota limit
> set.
>
> This patch aims to split the default quota value by quota type. Allowing each
> quota type having different default values.
>
> Default time limits are still set globally. XFS does not set a per-user/group
> timer, but a single global timer, so, there is no reason to split time limits
> too.
>
Hohum, found something else, sorry:
> @@ -606,55 +653,15 @@ xfs_qm_init_quotainfo(
> * We try to get the limits from the superuser's limits fields.
> * This is quite hacky, but it is standard quota practice.
> *
> - * We look at the USR dquot with id == 0 first, but if user quotas
> - * are not enabled we goto the GRP dquot with id == 0.
> - * We don't really care to keep separate default limits for user
> - * and group quotas, at least not at this point.
> - *
> * Since we may not have done a quotacheck by this point, just read
> * the dquot without attaching it to any hashtables or lists.
> */
> - error = xfs_qm_dqread(mp, 0,
> - XFS_IS_UQUOTA_RUNNING(mp) ? XFS_DQ_USER :
> - (XFS_IS_GQUOTA_RUNNING(mp) ? XFS_DQ_GROUP :
> - XFS_DQ_PROJ),
> - XFS_QMOPT_DOWARN, &dqp);
So here, we grab the *first* one that is running, and only that, to
populate the defaults ...
> - if (!error) {
> - xfs_disk_dquot_t *ddqp = &dqp->q_core;
> -
> - /*
> - * The warnings and timers set the grace period given to
> - * a user or group before he or she can not perform any
> - * more writing. If it is zero, a default is used.
> - */
> - qinf->qi_btimelimit = ddqp->d_btimer ?
> - be32_to_cpu(ddqp->d_btimer) : XFS_QM_BTIMELIMIT;
> - qinf->qi_itimelimit = ddqp->d_itimer ?
> - be32_to_cpu(ddqp->d_itimer) : XFS_QM_ITIMELIMIT;
> - qinf->qi_rtbtimelimit = ddqp->d_rtbtimer ?
> - be32_to_cpu(ddqp->d_rtbtimer) : XFS_QM_RTBTIMELIMIT;
> - qinf->qi_bwarnlimit = ddqp->d_bwarns ?
> - be16_to_cpu(ddqp->d_bwarns) : XFS_QM_BWARNLIMIT;
> - qinf->qi_iwarnlimit = ddqp->d_iwarns ?
> - be16_to_cpu(ddqp->d_iwarns) : XFS_QM_IWARNLIMIT;
> - qinf->qi_rtbwarnlimit = ddqp->d_rtbwarns ?
> - be16_to_cpu(ddqp->d_rtbwarns) : XFS_QM_RTBWARNLIMIT;
... including the time limits.
> - qinf->qi_bhardlimit = be64_to_cpu(ddqp->d_blk_hardlimit);
> - qinf->qi_bsoftlimit = be64_to_cpu(ddqp->d_blk_softlimit);
> - qinf->qi_ihardlimit = be64_to_cpu(ddqp->d_ino_hardlimit);
> - qinf->qi_isoftlimit = be64_to_cpu(ddqp->d_ino_softlimit);
> - qinf->qi_rtbhardlimit = be64_to_cpu(ddqp->d_rtb_hardlimit);
> - qinf->qi_rtbsoftlimit = be64_to_cpu(ddqp->d_rtb_softlimit);
> -
> - xfs_qm_dqdestroy(dqp);
> - } else {
> - qinf->qi_btimelimit = XFS_QM_BTIMELIMIT;
> - qinf->qi_itimelimit = XFS_QM_ITIMELIMIT;
> - qinf->qi_rtbtimelimit = XFS_QM_RTBTIMELIMIT;
> - qinf->qi_bwarnlimit = XFS_QM_BWARNLIMIT;
> - qinf->qi_iwarnlimit = XFS_QM_IWARNLIMIT;
> - qinf->qi_rtbwarnlimit = XFS_QM_RTBWARNLIMIT;
> - }
> + if (XFS_IS_UQUOTA_RUNNING(mp))
> + error = xfs_qm_set_defquota(mp, XFS_DQ_USER, qinf);
> + if (XFS_IS_GQUOTA_RUNNING(mp))
> + error = xfs_qm_set_defquota(mp, XFS_DQ_GROUP, qinf);
> + if (XFS_IS_PQUOTA_RUNNING(mp))
> + error = xfs_qm_set_defquota(mp, XFS_DQ_PROJ, qinf);
Here, you set the defaults for *each* one that is running, in succession.
But xfs_qm_set_defquota() sets global time limits, so you may overwrite
what you set earlier, for the previous type. i.e. it's last one wins.
So before, the global grace period was set by the first quota found running;
now it will be set by the last quota found running. That's probably a difference
in behavior you didn't intend.
(It's crazy behavior to start with, though; see my other email in this thread,
but we probably shouldn't trade crazy(1) for crazy(1); we should keep crazy(1)
and fix it properly at some point)
-Eric
_______________________________________________
xfs mailing list
xfs@xxxxxxxxxxx
http://oss.sgi.com/mailman/listinfo/xfs
