The auto kbuild infrastructure reports several failures on
non-standard arches (i386, sh, arm) due to a regression in the
recent log recovery crc verification (short write detection)
patches:
fs/built-in.o: In function `xlog_find_tail':
>> xfs_log_recover.c:(.text+0x1c5db5): undefined reference to `__moddi3'
xfs_log_recover.c:(.text+0x1c5e9d): undefined reference to `__moddi3'
This is due to the introduction of 64-bit modulus operations that
were 32-bit operations prior to the change. xlog_find_tail() used an
int to store the record header start block for the head of the log.
This was converted to an xfs_daddr_t as this is how the value is
represented in the callee functions that handle record
detection/verification, etc.
This was included as a minor cleanup as there wasn't an obvious
reason for using an int for this value in xlog_find_tail(). The
previously implicit cast was likely safe as this value represents a
log relative block number and the log can only be so big (2G). That
said, since all of the surrounding functionality uses xfs_daddr_t,
including the log buffer I/O helpers, update these calculations to
use do_mod() and handle the 64-bit modulus correctly regardless of
architecture.
Signed-off-by: Brian Foster <bfoster@xxxxxxxxxx>
---
Compile tested with ARCH=i386 and spot tested with xfstests on x86-64.
Brian
fs/xfs/xfs_log_recover.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/fs/xfs/xfs_log_recover.c b/fs/xfs/xfs_log_recover.c
index 5bf8076..26e67b4 100644
--- a/fs/xfs/xfs_log_recover.c
+++ b/fs/xfs/xfs_log_recover.c
@@ -1330,12 +1330,13 @@ xlog_find_tail(
} else {
hblks = 1;
}
- after_umount_blk = (rhead_blk + hblks + (int)
- BTOBB(be32_to_cpu(rhead->h_len))) % log->l_logBBsize;
+ after_umount_blk = rhead_blk + hblks + BTOBB(be32_to_cpu(rhead->h_len));
+ after_umount_blk = do_mod(after_umount_blk, log->l_logBBsize);
tail_lsn = atomic64_read(&log->l_tail_lsn);
if (*head_blk == after_umount_blk &&
be32_to_cpu(rhead->h_num_logops) == 1) {
- umount_data_blk = (rhead_blk + hblks) % log->l_logBBsize;
+ umount_data_blk = rhead_blk + hblks;
+ umount_data_blk = do_mod(umount_data_blk, log->l_logBBsize);
error = xlog_bread(log, umount_data_blk, 1, bp, &offset);
if (error)
goto done;
--
2.4.3
_______________________________________________
xfs mailing list
xfs@xxxxxxxxxxx
http://oss.sgi.com/mailman/listinfo/xfs
