Test CoW operations when blocksize < pagesize and the only reflink
block is in the middle of the page.
Signed-off-by: Darrick J. Wong <darrick.wong@xxxxxxxxxx>
---
common/reflink | 30 +++++++++
tests/generic/868 | 102 +++++++++++++++++++++++++++++++
tests/generic/868.out | 7 ++
tests/generic/869 | 102 +++++++++++++++++++++++++++++++
tests/generic/869.out | 7 ++
tests/generic/870 | 103 +++++++++++++++++++++++++++++++
tests/generic/870.out | 7 ++
tests/generic/871 | 103 +++++++++++++++++++++++++++++++
tests/generic/871.out | 7 ++
tests/generic/872 | 97 +++++++++++++++++++++++++++++
tests/generic/872.out | 7 ++
tests/generic/873 | 97 +++++++++++++++++++++++++++++
tests/generic/873.out | 7 ++
tests/generic/874 | 103 +++++++++++++++++++++++++++++++
tests/generic/874.out | 7 ++
tests/generic/875 | 103 +++++++++++++++++++++++++++++++
tests/generic/875.out | 7 ++
tests/generic/876 | 163 +++++++++++++++++++++++++++++++++++++++++++++++++
tests/generic/876.out | 83 +++++++++++++++++++++++++
tests/generic/877 | 163 +++++++++++++++++++++++++++++++++++++++++++++++++
tests/generic/877.out | 83 +++++++++++++++++++++++++
tests/generic/group | 10 +++
22 files changed, 1398 insertions(+)
create mode 100755 tests/generic/868
create mode 100644 tests/generic/868.out
create mode 100755 tests/generic/869
create mode 100644 tests/generic/869.out
create mode 100755 tests/generic/870
create mode 100644 tests/generic/870.out
create mode 100755 tests/generic/871
create mode 100644 tests/generic/871.out
create mode 100755 tests/generic/872
create mode 100644 tests/generic/872.out
create mode 100755 tests/generic/873
create mode 100644 tests/generic/873.out
create mode 100755 tests/generic/874
create mode 100644 tests/generic/874.out
create mode 100755 tests/generic/875
create mode 100644 tests/generic/875.out
create mode 100755 tests/generic/876
create mode 100644 tests/generic/876.out
create mode 100755 tests/generic/877
create mode 100644 tests/generic/877.out
diff --git a/common/reflink b/common/reflink
index eab7f66..de8e56d 100644
--- a/common/reflink
+++ b/common/reflink
@@ -183,3 +183,33 @@ _dedupe_range() {
"$XFS_IO_PROG" $xfs_io_args -f -c "dedupe $file1 $offset1 $offset2 $len" "$file2"
}
+
+# Create fs of certain blocksize on scratch device
+# _scratch_mkfs_blocksized blocksize
+_scratch_mkfs_blocksized()
+{
+ blocksize=$1
+
+ re='^[0-9]+$'
+ if ! [[ $blocksize =~ $re ]] ; then
+ _notrun "error: _scratch_mkfs_sized: block size \"$blocksize\" not an integer."
+ fi
+
+ case $FSTYP in
+ xfs)
+ # don't override MKFS_OPTIONS that set a block size.
+ echo $MKFS_OPTIONS |egrep -q "b?size="
+ if [ $? -eq 0 ]; then
+ _scratch_mkfs_xfs
+ else
+ _scratch_mkfs_xfs -b size=$blocksize
+ fi
+ ;;
+ ext2|ext3|ext4|ocfs2)
+ ${MKFS_PROG}.$FSTYP -F $MKFS_OPTIONS -b $blocksize $SCRATCH_DEV
+ ;;
+ *)
+ _notrun "Filesystem $FSTYP not supported in _scratch_mkfs_blocksized"
+ ;;
+ esac
+}
diff --git a/tests/generic/868 b/tests/generic/868
new file mode 100755
index 0000000..0de4f75
--- /dev/null
+++ b/tests/generic/868
@@ -0,0 +1,102 @@
+#! /bin/bash
+# FS QA Test No. 868
+#
+# See what happens if we CoW blocks 2-4 of a page's worth of blocks when the
+# second block is a regular block.
+#
+# This test is dependent on the system page size, so we cannot use md5 in
+# the golden output; we can only compare to a check file.
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2015, Oracle and/or its affiliates. All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#-----------------------------------------------------------------------
+
+seq=`basename "$0"`
+seqres="$RESULT_DIR/$seq"
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+ cd /
+ rm -rf "$tmp".* "$TESTDIR"
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+. ./common/reflink
+
+# real QA test starts here
+_supported_os Linux
+_require_scratch_reflink
+
+rm -f "$seqres.full"
+
+PAGESZ=$(getconf PAGE_SIZE)
+BLKSZ=$((PAGESZ / 4))
+
+echo "Format and mount"
+_scratch_mkfs_blocksized $BLKSZ > "$seqres.full" 2>&1
+_scratch_mount >> "$seqres.full" 2>&1
+
+TESTDIR="$SCRATCH_MNT/test-$seq"
+rm -rf $TESTDIR
+mkdir $TESTDIR
+
+REAL_BLKSZ=$(stat -f -c '%S' $TESTDIR)
+test "$REAL_BLKSZ" != "$BLKSZ" && _notrun "Failed to format with small blocksize."
+
+echo "Create the original files"
+_pwrite_byte 0x61 0 $PAGESZ "$TESTDIR/file1" >> "$seqres.full"
+
+"$XFS_IO_PROG" -f -c "truncate $PAGESZ" "$TESTDIR/file2" >> "$seqres.full"
+"$XFS_IO_PROG" -f -c "truncate $PAGESZ" "$TESTDIR/file2.chk" >> "$seqres.full"
+
+_pwrite_byte 0x61 $BLKSZ $BLKSZ "$TESTDIR/file2" >> "$seqres.full"
+_pwrite_byte 0x61 $BLKSZ $BLKSZ "$TESTDIR/file2.chk" >> "$seqres.full"
+
+_pwrite_byte 0x61 $((BLKSZ * 3)) $BLKSZ "$TESTDIR/file2" >> "$seqres.full"
+_pwrite_byte 0x61 $((BLKSZ * 3)) $BLKSZ "$TESTDIR/file2.chk" >> "$seqres.full"
+
+_reflink_range "$TESTDIR/file1" $BLKSZ "$TESTDIR/file2" $((BLKSZ * 2)) $BLKSZ >> "$seqres.full"
+_pwrite_byte 0x61 $((BLKSZ * 2)) $BLKSZ "$TESTDIR/file2.chk" >> "$seqres.full"
+_scratch_remount
+
+echo "Compare files"
+! cmp -s "$TESTDIR/file1" "$TESTDIR/file2" || _fail "file1 and file2 don't match."
+cmp -s "$TESTDIR/file2" "$TESTDIR/file2.chk" || _fail "file2 and file2.chk don't match."
+
+echo "CoW and unmount"
+"$XFS_IO_PROG" -f -c "pwrite -S 0x63 $((BLKSZ + 17)) $((BLKSZ * 3 - 34))" "$TESTDIR/file2" >> "$seqres.full"
+"$XFS_IO_PROG" -f -c "pwrite -S 0x63 $((BLKSZ + 17)) $((BLKSZ * 3 - 34))" "$TESTDIR/file2.chk" >> "$seqres.full"
+_scratch_remount
+
+echo "Compare files"
+! cmp -s "$TESTDIR/file1" "$TESTDIR/file2" || _fail "file1 and file2 don't match."
+cmp -s "$TESTDIR/file2" "$TESTDIR/file2.chk" || _fail "file2 and file2.chk don't match."
+
+echo "Check for damage"
+umount "$SCRATCH_MNT"
+_check_scratch_fs
+
+# success, all done
+status=0
+exit
diff --git a/tests/generic/868.out b/tests/generic/868.out
new file mode 100644
index 0000000..d4a4e42
--- /dev/null
+++ b/tests/generic/868.out
@@ -0,0 +1,7 @@
+QA output created by 868
+Format and mount
+Create the original files
+Compare files
+CoW and unmount
+Compare files
+Check for damage
diff --git a/tests/generic/869 b/tests/generic/869
new file mode 100755
index 0000000..b64407c
--- /dev/null
+++ b/tests/generic/869
@@ -0,0 +1,102 @@
+#! /bin/bash
+# FS QA Test No. 869
+#
+# See what happens if we DIO CoW blocks 2-4 of a page's worth of blocks when
+# the second block is a regular block.
+#
+# This test is dependent on the system page size, so we cannot use md5 in
+# the golden output; we can only compare to a check file.
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2015, Oracle and/or its affiliates. All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#-----------------------------------------------------------------------
+
+seq=`basename "$0"`
+seqres="$RESULT_DIR/$seq"
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+ cd /
+ rm -rf "$tmp".* "$TESTDIR"
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+. ./common/reflink
+
+# real QA test starts here
+_supported_os Linux
+_require_scratch_reflink
+
+rm -f "$seqres.full"
+
+PAGESZ=$(getconf PAGE_SIZE)
+BLKSZ=$((PAGESZ / 4))
+
+echo "Format and mount"
+_scratch_mkfs_blocksized $BLKSZ > "$seqres.full" 2>&1
+_scratch_mount >> "$seqres.full" 2>&1
+
+TESTDIR="$SCRATCH_MNT/test-$seq"
+rm -rf $TESTDIR
+mkdir $TESTDIR
+
+REAL_BLKSZ=$(stat -f -c '%S' $TESTDIR)
+test "$REAL_BLKSZ" != "$BLKSZ" && _notrun "Failed to format with small blocksize."
+
+echo "Create the original files"
+_pwrite_byte 0x61 0 $PAGESZ "$TESTDIR/file1" >> "$seqres.full"
+
+"$XFS_IO_PROG" -f -c "truncate $PAGESZ" "$TESTDIR/file2" >> "$seqres.full"
+"$XFS_IO_PROG" -f -c "truncate $PAGESZ" "$TESTDIR/file2.chk" >> "$seqres.full"
+
+_pwrite_byte 0x61 $BLKSZ $BLKSZ "$TESTDIR/file2" >> "$seqres.full"
+_pwrite_byte 0x61 $BLKSZ $BLKSZ "$TESTDIR/file2.chk" >> "$seqres.full"
+
+_pwrite_byte 0x61 $((BLKSZ * 3)) $BLKSZ "$TESTDIR/file2" >> "$seqres.full"
+_pwrite_byte 0x61 $((BLKSZ * 3)) $BLKSZ "$TESTDIR/file2.chk" >> "$seqres.full"
+
+_reflink_range "$TESTDIR/file1" $BLKSZ "$TESTDIR/file2" $((BLKSZ * 2)) $BLKSZ >> "$seqres.full"
+_pwrite_byte 0x61 $((BLKSZ * 2)) $BLKSZ "$TESTDIR/file2.chk" >> "$seqres.full"
+_scratch_remount
+
+echo "Compare files"
+! cmp -s "$TESTDIR/file1" "$TESTDIR/file2" || _fail "file1 and file2 don't match."
+cmp -s "$TESTDIR/file2" "$TESTDIR/file2.chk" || _fail "file2 and file2.chk don't match."
+
+echo "CoW and unmount"
+"$XFS_IO_PROG" -d -f -c "pwrite -S 0x63 $BLKSZ $((BLKSZ * 3))" "$TESTDIR/file2" >> "$seqres.full"
+"$XFS_IO_PROG" -f -c "pwrite -S 0x63 $BLKSZ $((BLKSZ * 3))" "$TESTDIR/file2.chk" >> "$seqres.full"
+_scratch_remount
+
+echo "Compare files"
+! cmp -s "$TESTDIR/file1" "$TESTDIR/file2" || _fail "file1 and file2 don't match."
+cmp -s "$TESTDIR/file2" "$TESTDIR/file2.chk" || _fail "file2 and file2.chk don't match."
+
+echo "Check for damage"
+umount "$SCRATCH_MNT"
+_check_scratch_fs
+
+# success, all done
+status=0
+exit
diff --git a/tests/generic/869.out b/tests/generic/869.out
new file mode 100644
index 0000000..612da46
--- /dev/null
+++ b/tests/generic/869.out
@@ -0,0 +1,7 @@
+QA output created by 869
+Format and mount
+Create the original files
+Compare files
+CoW and unmount
+Compare files
+Check for damage
diff --git a/tests/generic/870 b/tests/generic/870
new file mode 100755
index 0000000..3efb2d3
--- /dev/null
+++ b/tests/generic/870
@@ -0,0 +1,103 @@
+#! /bin/bash
+# FS QA Test No. 870
+#
+# See what happens if we CoW blocks 2-4 of a page's worth of blocks when the
+# second block is a unwritten block.
+#
+# This test is dependent on the system page size, so we cannot use md5 in
+# the golden output; we can only compare to a check file.
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2015, Oracle and/or its affiliates. All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#-----------------------------------------------------------------------
+
+seq=`basename "$0"`
+seqres="$RESULT_DIR/$seq"
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+ cd /
+ rm -rf "$tmp".* "$TESTDIR"
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+. ./common/reflink
+
+# real QA test starts here
+_supported_os Linux
+_require_scratch_reflink
+_require_xfs_io_command "falloc"
+
+rm -f "$seqres.full"
+
+PAGESZ=$(getconf PAGE_SIZE)
+BLKSZ=$((PAGESZ / 4))
+
+echo "Format and mount"
+_scratch_mkfs_blocksized $BLKSZ > "$seqres.full" 2>&1
+_scratch_mount >> "$seqres.full" 2>&1
+
+TESTDIR="$SCRATCH_MNT/test-$seq"
+rm -rf $TESTDIR
+mkdir $TESTDIR
+
+REAL_BLKSZ=$(stat -f -c '%S' $TESTDIR)
+test "$REAL_BLKSZ" != "$BLKSZ" && _notrun "Failed to format with small blocksize."
+
+echo "Create the original files"
+_pwrite_byte 0x61 0 $PAGESZ "$TESTDIR/file1" >> "$seqres.full"
+
+"$XFS_IO_PROG" -f -c "truncate $PAGESZ" "$TESTDIR/file2" >> "$seqres.full"
+"$XFS_IO_PROG" -f -c "truncate $PAGESZ" "$TESTDIR/file2.chk" >> "$seqres.full"
+
+"$XFS_IO_PROG" -f -c "falloc -k $BLKSZ $BLKSZ" "$TESTDIR/file2" >> "$seqres.full"
+_pwrite_byte 0x00 $BLKSZ $BLKSZ "$TESTDIR/file2.chk" >> "$seqres.full"
+
+"$XFS_IO_PROG" -f -c "falloc -k $((BLKSZ * 3)) $BLKSZ" "$TESTDIR/file2" >> "$seqres.full"
+_pwrite_byte 0x00 $((BLKSZ * 3)) $BLKSZ "$TESTDIR/file2.chk" >> "$seqres.full"
+
+_reflink_range "$TESTDIR/file1" $BLKSZ "$TESTDIR/file2" $((BLKSZ * 2)) $BLKSZ >> "$seqres.full"
+_pwrite_byte 0x61 $((BLKSZ * 2)) $BLKSZ "$TESTDIR/file2.chk" >> "$seqres.full"
+_scratch_remount
+
+echo "Compare files"
+! cmp -s "$TESTDIR/file1" "$TESTDIR/file2" || _fail "file1 and file2 don't match."
+cmp -s "$TESTDIR/file2" "$TESTDIR/file2.chk" || _fail "file2 and file2.chk don't match."
+
+echo "CoW and unmount"
+"$XFS_IO_PROG" -f -c "pwrite -S 0x63 $((BLKSZ + 17)) $((BLKSZ * 3 - 34))" "$TESTDIR/file2" >> "$seqres.full"
+"$XFS_IO_PROG" -f -c "pwrite -S 0x63 $((BLKSZ + 17)) $((BLKSZ * 3 - 34))" "$TESTDIR/file2.chk" >> "$seqres.full"
+_scratch_remount
+
+echo "Compare files"
+! cmp -s "$TESTDIR/file1" "$TESTDIR/file2" || _fail "file1 and file2 don't match."
+cmp -s "$TESTDIR/file2" "$TESTDIR/file2.chk" || _fail "file2 and file2.chk don't match."
+
+echo "Check for damage"
+umount "$SCRATCH_MNT"
+_check_scratch_fs
+
+# success, all done
+status=0
+exit
diff --git a/tests/generic/870.out b/tests/generic/870.out
new file mode 100644
index 0000000..d67b27c
--- /dev/null
+++ b/tests/generic/870.out
@@ -0,0 +1,7 @@
+QA output created by 870
+Format and mount
+Create the original files
+Compare files
+CoW and unmount
+Compare files
+Check for damage
diff --git a/tests/generic/871 b/tests/generic/871
new file mode 100755
index 0000000..f0cc148
--- /dev/null
+++ b/tests/generic/871
@@ -0,0 +1,103 @@
+#! /bin/bash
+# FS QA Test No. 871
+#
+# See what happens if we DIO CoW blocks 2-4 of a page's worth of blocks when
+# the second block is a unwritten block.
+#
+# This test is dependent on the system page size, so we cannot use md5 in
+# the golden output; we can only compare to a check file.
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2015, Oracle and/or its affiliates. All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#-----------------------------------------------------------------------
+
+seq=`basename "$0"`
+seqres="$RESULT_DIR/$seq"
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+ cd /
+ rm -rf "$tmp".* "$TESTDIR"
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+. ./common/reflink
+
+# real QA test starts here
+_supported_os Linux
+_require_scratch_reflink
+_require_xfs_io_command "falloc"
+
+rm -f "$seqres.full"
+
+PAGESZ=$(getconf PAGE_SIZE)
+BLKSZ=$((PAGESZ / 4))
+
+echo "Format and mount"
+_scratch_mkfs_blocksized $BLKSZ > "$seqres.full" 2>&1
+_scratch_mount >> "$seqres.full" 2>&1
+
+TESTDIR="$SCRATCH_MNT/test-$seq"
+rm -rf $TESTDIR
+mkdir $TESTDIR
+
+REAL_BLKSZ=$(stat -f -c '%S' $TESTDIR)
+test "$REAL_BLKSZ" != "$BLKSZ" && _notrun "Failed to format with small blocksize."
+
+echo "Create the original files"
+_pwrite_byte 0x61 0 $PAGESZ "$TESTDIR/file1" >> "$seqres.full"
+
+"$XFS_IO_PROG" -f -c "truncate $PAGESZ" "$TESTDIR/file2" >> "$seqres.full"
+"$XFS_IO_PROG" -f -c "truncate $PAGESZ" "$TESTDIR/file2.chk" >> "$seqres.full"
+
+"$XFS_IO_PROG" -f -c "falloc -k $BLKSZ $BLKSZ" "$TESTDIR/file2" >> "$seqres.full"
+_pwrite_byte 0x00 $BLKSZ $BLKSZ "$TESTDIR/file2.chk" >> "$seqres.full"
+
+"$XFS_IO_PROG" -f -c "falloc -k $((BLKSZ * 3)) $BLKSZ" "$TESTDIR/file2" >> "$seqres.full"
+_pwrite_byte 0x00 $((BLKSZ * 3)) $BLKSZ "$TESTDIR/file2.chk" >> "$seqres.full"
+
+_reflink_range "$TESTDIR/file1" $BLKSZ "$TESTDIR/file2" $((BLKSZ * 2)) $BLKSZ >> "$seqres.full"
+_pwrite_byte 0x61 $((BLKSZ * 2)) $BLKSZ "$TESTDIR/file2.chk" >> "$seqres.full"
+_scratch_remount
+
+echo "Compare files"
+! cmp -s "$TESTDIR/file1" "$TESTDIR/file2" || _fail "file1 and file2 don't match."
+cmp -s "$TESTDIR/file2" "$TESTDIR/file2.chk" || _fail "file2 and file2.chk don't match."
+
+echo "CoW and unmount"
+"$XFS_IO_PROG" -d -f -c "pwrite -S 0x63 $BLKSZ $((BLKSZ * 3))" "$TESTDIR/file2" >> "$seqres.full"
+"$XFS_IO_PROG" -f -c "pwrite -S 0x63 $BLKSZ $((BLKSZ * 3))" "$TESTDIR/file2.chk" >> "$seqres.full"
+_scratch_remount
+
+echo "Compare files"
+! cmp -s "$TESTDIR/file1" "$TESTDIR/file2" || _fail "file1 and file2 don't match."
+cmp -s "$TESTDIR/file2" "$TESTDIR/file2.chk" || _fail "file2 and file2.chk don't match."
+
+echo "Check for damage"
+umount "$SCRATCH_MNT"
+_check_scratch_fs
+
+# success, all done
+status=0
+exit
diff --git a/tests/generic/871.out b/tests/generic/871.out
new file mode 100644
index 0000000..b2e20a4
--- /dev/null
+++ b/tests/generic/871.out
@@ -0,0 +1,7 @@
+QA output created by 871
+Format and mount
+Create the original files
+Compare files
+CoW and unmount
+Compare files
+Check for damage
diff --git a/tests/generic/872 b/tests/generic/872
new file mode 100755
index 0000000..9ba0d71
--- /dev/null
+++ b/tests/generic/872
@@ -0,0 +1,97 @@
+#! /bin/bash
+# FS QA Test No. 872
+#
+# See what happens if we CoW blocks 2-4 of a page's worth of blocks when the
+# second block is a hole.
+#
+# This test is dependent on the system page size, so we cannot use md5 in
+# the golden output; we can only compare to a check file.
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2015, Oracle and/or its affiliates. All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#-----------------------------------------------------------------------
+
+seq=`basename "$0"`
+seqres="$RESULT_DIR/$seq"
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+ cd /
+ rm -rf "$tmp".* "$TESTDIR"
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+. ./common/reflink
+
+# real QA test starts here
+_supported_os Linux
+_require_scratch_reflink
+_require_xfs_io_command "falloc"
+
+rm -f "$seqres.full"
+
+PAGESZ=$(getconf PAGE_SIZE)
+BLKSZ=$((PAGESZ / 4))
+
+echo "Format and mount"
+_scratch_mkfs_blocksized $BLKSZ > "$seqres.full" 2>&1
+_scratch_mount >> "$seqres.full" 2>&1
+
+TESTDIR="$SCRATCH_MNT/test-$seq"
+rm -rf $TESTDIR
+mkdir $TESTDIR
+
+REAL_BLKSZ=$(stat -f -c '%S' $TESTDIR)
+test "$REAL_BLKSZ" != "$BLKSZ" && _notrun "Failed to format with small blocksize."
+
+echo "Create the original files"
+_pwrite_byte 0x61 0 $PAGESZ "$TESTDIR/file1" >> "$seqres.full"
+
+"$XFS_IO_PROG" -f -c "truncate $PAGESZ" "$TESTDIR/file2" >> "$seqres.full"
+"$XFS_IO_PROG" -f -c "truncate $PAGESZ" "$TESTDIR/file2.chk" >> "$seqres.full"
+
+_reflink_range "$TESTDIR/file1" $BLKSZ "$TESTDIR/file2" $((BLKSZ * 2)) $BLKSZ >> "$seqres.full"
+_pwrite_byte 0x61 $((BLKSZ * 2)) $BLKSZ "$TESTDIR/file2.chk" >> "$seqres.full"
+_scratch_remount
+
+echo "Compare files"
+! cmp -s "$TESTDIR/file1" "$TESTDIR/file2" || _fail "file1 and file2 don't match."
+cmp -s "$TESTDIR/file2" "$TESTDIR/file2.chk" || _fail "file2 and file2.chk don't match."
+
+echo "CoW and unmount"
+"$XFS_IO_PROG" -f -c "pwrite -S 0x63 $((BLKSZ + 17)) $((BLKSZ * 3 - 34))" "$TESTDIR/file2" >> "$seqres.full"
+"$XFS_IO_PROG" -f -c "pwrite -S 0x63 $((BLKSZ + 17)) $((BLKSZ * 3 - 34))" "$TESTDIR/file2.chk" >> "$seqres.full"
+_scratch_remount
+
+echo "Compare files"
+! cmp -s "$TESTDIR/file1" "$TESTDIR/file2" || _fail "file1 and file2 don't match."
+cmp -s "$TESTDIR/file2" "$TESTDIR/file2.chk" || _fail "file2 and file2.chk don't match."
+
+echo "Check for damage"
+umount "$SCRATCH_MNT"
+_check_scratch_fs
+
+# success, all done
+status=0
+exit
diff --git a/tests/generic/872.out b/tests/generic/872.out
new file mode 100644
index 0000000..40eff65
--- /dev/null
+++ b/tests/generic/872.out
@@ -0,0 +1,7 @@
+QA output created by 872
+Format and mount
+Create the original files
+Compare files
+CoW and unmount
+Compare files
+Check for damage
diff --git a/tests/generic/873 b/tests/generic/873
new file mode 100755
index 0000000..589d12b
--- /dev/null
+++ b/tests/generic/873
@@ -0,0 +1,97 @@
+#! /bin/bash
+# FS QA Test No. 873
+#
+# See what happens if we DIO CoW blocks 2-4 of a page's worth of blocks when
+# the second block is a unwritten block.
+#
+# This test is dependent on the system page size, so we cannot use md5 in
+# the golden output; we can only compare to a check file.
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2015, Oracle and/or its affiliates. All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#-----------------------------------------------------------------------
+
+seq=`basename "$0"`
+seqres="$RESULT_DIR/$seq"
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+ cd /
+ rm -rf "$tmp".* "$TESTDIR"
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+. ./common/reflink
+
+# real QA test starts here
+_supported_os Linux
+_require_scratch_reflink
+_require_xfs_io_command "falloc"
+
+rm -f "$seqres.full"
+
+PAGESZ=$(getconf PAGE_SIZE)
+BLKSZ=$((PAGESZ / 4))
+
+echo "Format and mount"
+_scratch_mkfs_blocksized $BLKSZ > "$seqres.full" 2>&1
+_scratch_mount >> "$seqres.full" 2>&1
+
+TESTDIR="$SCRATCH_MNT/test-$seq"
+rm -rf $TESTDIR
+mkdir $TESTDIR
+
+REAL_BLKSZ=$(stat -f -c '%S' $TESTDIR)
+test "$REAL_BLKSZ" != "$BLKSZ" && _notrun "Failed to format with small blocksize."
+
+echo "Create the original files"
+_pwrite_byte 0x61 0 $PAGESZ "$TESTDIR/file1" >> "$seqres.full"
+
+"$XFS_IO_PROG" -f -c "truncate $PAGESZ" "$TESTDIR/file2" >> "$seqres.full"
+"$XFS_IO_PROG" -f -c "truncate $PAGESZ" "$TESTDIR/file2.chk" >> "$seqres.full"
+
+_reflink_range "$TESTDIR/file1" $BLKSZ "$TESTDIR/file2" $((BLKSZ * 2)) $BLKSZ >> "$seqres.full"
+_pwrite_byte 0x61 $((BLKSZ * 2)) $BLKSZ "$TESTDIR/file2.chk" >> "$seqres.full"
+_scratch_remount
+
+echo "Compare files"
+! cmp -s "$TESTDIR/file1" "$TESTDIR/file2" || _fail "file1 and file2 don't match."
+cmp -s "$TESTDIR/file2" "$TESTDIR/file2.chk" || _fail "file2 and file2.chk don't match."
+
+echo "CoW and unmount"
+"$XFS_IO_PROG" -d -f -c "pwrite -S 0x63 $BLKSZ $((BLKSZ * 3))" "$TESTDIR/file2" >> "$seqres.full"
+"$XFS_IO_PROG" -f -c "pwrite -S 0x63 $BLKSZ $((BLKSZ * 3))" "$TESTDIR/file2.chk" >> "$seqres.full"
+_scratch_remount
+
+echo "Compare files"
+! cmp -s "$TESTDIR/file1" "$TESTDIR/file2" || _fail "file1 and file2 don't match."
+cmp -s "$TESTDIR/file2" "$TESTDIR/file2.chk" || _fail "file2 and file2.chk don't match."
+
+echo "Check for damage"
+umount "$SCRATCH_MNT"
+_check_scratch_fs
+
+# success, all done
+status=0
+exit
diff --git a/tests/generic/873.out b/tests/generic/873.out
new file mode 100644
index 0000000..c6a5399
--- /dev/null
+++ b/tests/generic/873.out
@@ -0,0 +1,7 @@
+QA output created by 873
+Format and mount
+Create the original files
+Compare files
+CoW and unmount
+Compare files
+Check for damage
diff --git a/tests/generic/874 b/tests/generic/874
new file mode 100755
index 0000000..e89b910
--- /dev/null
+++ b/tests/generic/874
@@ -0,0 +1,103 @@
+#! /bin/bash
+# FS QA Test No. 874
+#
+# See what happens if we CoW blocks 2-4 of a page's worth of blocks when the
+# second block is delalloc.
+#
+# This test is dependent on the system page size, so we cannot use md5 in
+# the golden output; we can only compare to a check file.
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2015, Oracle and/or its affiliates. All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#-----------------------------------------------------------------------
+
+seq=`basename "$0"`
+seqres="$RESULT_DIR/$seq"
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+ cd /
+ rm -rf "$tmp".* "$TESTDIR"
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+. ./common/reflink
+
+# real QA test starts here
+_supported_os Linux
+_require_scratch_reflink
+_require_xfs_io_command "falloc"
+
+rm -f "$seqres.full"
+
+PAGESZ=$(getconf PAGE_SIZE)
+BLKSZ=$((PAGESZ / 4))
+
+echo "Format and mount"
+_scratch_mkfs_blocksized $BLKSZ > "$seqres.full" 2>&1
+_scratch_mount >> "$seqres.full" 2>&1
+
+TESTDIR="$SCRATCH_MNT/test-$seq"
+rm -rf $TESTDIR
+mkdir $TESTDIR
+
+REAL_BLKSZ=$(stat -f -c '%S' $TESTDIR)
+test "$REAL_BLKSZ" != "$BLKSZ" && _notrun "Failed to format with small blocksize."
+
+echo "Create the original files"
+_pwrite_byte 0x61 0 $PAGESZ "$TESTDIR/file1" >> "$seqres.full"
+
+"$XFS_IO_PROG" -f -c "truncate $PAGESZ" "$TESTDIR/file2" >> "$seqres.full"
+"$XFS_IO_PROG" -f -c "truncate $PAGESZ" "$TESTDIR/file2.chk" >> "$seqres.full"
+
+_reflink_range "$TESTDIR/file1" $BLKSZ "$TESTDIR/file2" $((BLKSZ * 2)) $BLKSZ >> "$seqres.full"
+_pwrite_byte 0x61 $((BLKSZ * 2)) $BLKSZ "$TESTDIR/file2.chk" >> "$seqres.full"
+_scratch_remount
+
+echo "Compare files"
+! cmp -s "$TESTDIR/file1" "$TESTDIR/file2" || _fail "file1 and file2 don't match."
+cmp -s "$TESTDIR/file2" "$TESTDIR/file2.chk" || _fail "file2 and file2.chk don't match."
+
+echo "CoW and unmount"
+_pwrite_byte 0x61 $BLKSZ $BLKSZ "$TESTDIR/file2" >> "$seqres.full"
+_pwrite_byte 0x61 $BLKSZ $BLKSZ "$TESTDIR/file2.chk" >> "$seqres.full"
+
+_pwrite_byte 0x61 $((BLKSZ * 3)) $BLKSZ "$TESTDIR/file2" >> "$seqres.full"
+_pwrite_byte 0x61 $((BLKSZ * 3)) $BLKSZ "$TESTDIR/file2.chk" >> "$seqres.full"
+
+"$XFS_IO_PROG" -f -c "pwrite -S 0x63 $((BLKSZ + 17)) $((BLKSZ * 3 - 34))" "$TESTDIR/file2" >> "$seqres.full"
+"$XFS_IO_PROG" -f -c "pwrite -S 0x63 $((BLKSZ + 17)) $((BLKSZ * 3 - 34))" "$TESTDIR/file2.chk" >> "$seqres.full"
+_scratch_remount
+
+echo "Compare files"
+! cmp -s "$TESTDIR/file1" "$TESTDIR/file2" || _fail "file1 and file2 don't match."
+cmp -s "$TESTDIR/file2" "$TESTDIR/file2.chk" || _fail "file2 and file2.chk don't match."
+
+echo "Check for damage"
+umount "$SCRATCH_MNT"
+_check_scratch_fs
+
+# success, all done
+status=0
+exit
diff --git a/tests/generic/874.out b/tests/generic/874.out
new file mode 100644
index 0000000..0ded3bf
--- /dev/null
+++ b/tests/generic/874.out
@@ -0,0 +1,7 @@
+QA output created by 874
+Format and mount
+Create the original files
+Compare files
+CoW and unmount
+Compare files
+Check for damage
diff --git a/tests/generic/875 b/tests/generic/875
new file mode 100755
index 0000000..d7ac31c
--- /dev/null
+++ b/tests/generic/875
@@ -0,0 +1,103 @@
+#! /bin/bash
+# FS QA Test No. 875
+#
+# See what happens if we DIO CoW blocks 2-4 of a page's worth of blocks when
+# the second block is delalloc.
+#
+# This test is dependent on the system page size, so we cannot use md5 in
+# the golden output; we can only compare to a check file.
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2015, Oracle and/or its affiliates. All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#-----------------------------------------------------------------------
+
+seq=`basename "$0"`
+seqres="$RESULT_DIR/$seq"
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+ cd /
+ rm -rf "$tmp".* "$TESTDIR"
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+. ./common/reflink
+
+# real QA test starts here
+_supported_os Linux
+_require_scratch_reflink
+_require_xfs_io_command "falloc"
+
+rm -f "$seqres.full"
+
+PAGESZ=$(getconf PAGE_SIZE)
+BLKSZ=$((PAGESZ / 4))
+
+echo "Format and mount"
+_scratch_mkfs_blocksized $BLKSZ > "$seqres.full" 2>&1
+_scratch_mount >> "$seqres.full" 2>&1
+
+TESTDIR="$SCRATCH_MNT/test-$seq"
+rm -rf $TESTDIR
+mkdir $TESTDIR
+
+REAL_BLKSZ=$(stat -f -c '%S' $TESTDIR)
+test "$REAL_BLKSZ" != "$BLKSZ" && _notrun "Failed to format with small blocksize."
+
+echo "Create the original files"
+_pwrite_byte 0x61 0 $PAGESZ "$TESTDIR/file1" >> "$seqres.full"
+
+"$XFS_IO_PROG" -f -c "truncate $PAGESZ" "$TESTDIR/file2" >> "$seqres.full"
+"$XFS_IO_PROG" -f -c "truncate $PAGESZ" "$TESTDIR/file2.chk" >> "$seqres.full"
+
+_reflink_range "$TESTDIR/file1" $BLKSZ "$TESTDIR/file2" $((BLKSZ * 2)) $BLKSZ >> "$seqres.full"
+_pwrite_byte 0x61 $((BLKSZ * 2)) $BLKSZ "$TESTDIR/file2.chk" >> "$seqres.full"
+_scratch_remount
+
+echo "Compare files"
+! cmp -s "$TESTDIR/file1" "$TESTDIR/file2" || _fail "file1 and file2 don't match."
+cmp -s "$TESTDIR/file2" "$TESTDIR/file2.chk" || _fail "file2 and file2.chk don't match."
+
+echo "CoW and unmount"
+_pwrite_byte 0x61 $BLKSZ $BLKSZ "$TESTDIR/file2" >> "$seqres.full"
+_pwrite_byte 0x61 $BLKSZ $BLKSZ "$TESTDIR/file2.chk" >> "$seqres.full"
+
+_pwrite_byte 0x61 $((BLKSZ * 3)) $BLKSZ "$TESTDIR/file2" >> "$seqres.full"
+_pwrite_byte 0x61 $((BLKSZ * 3)) $BLKSZ "$TESTDIR/file2.chk" >> "$seqres.full"
+
+"$XFS_IO_PROG" -d -f -c "pwrite -S 0x63 $BLKSZ $((BLKSZ * 3))" "$TESTDIR/file2" >> "$seqres.full"
+"$XFS_IO_PROG" -f -c "pwrite -S 0x63 $BLKSZ $((BLKSZ * 3))" "$TESTDIR/file2.chk" >> "$seqres.full"
+_scratch_remount
+
+echo "Compare files"
+! cmp -s "$TESTDIR/file1" "$TESTDIR/file2" || _fail "file1 and file2 don't match."
+cmp -s "$TESTDIR/file2" "$TESTDIR/file2.chk" || _fail "file2 and file2.chk don't match."
+
+echo "Check for damage"
+umount "$SCRATCH_MNT"
+_check_scratch_fs
+
+# success, all done
+status=0
+exit
diff --git a/tests/generic/875.out b/tests/generic/875.out
new file mode 100644
index 0000000..968fe4b
--- /dev/null
+++ b/tests/generic/875.out
@@ -0,0 +1,7 @@
+QA output created by 875
+Format and mount
+Create the original files
+Compare files
+CoW and unmount
+Compare files
+Check for damage
diff --git a/tests/generic/876 b/tests/generic/876
new file mode 100755
index 0000000..c38690e
--- /dev/null
+++ b/tests/generic/876
@@ -0,0 +1,163 @@
+#! /bin/bash
+# FS QA Test No. 876
+#
+# See what happens if we CoW blocks 2-4 of a page's worth of blocks when the
+# surrounding blocks vary between unwritten/regular/delalloc/hole.
+#
+# This test is dependent on the system page size, so we cannot use md5 in
+# the golden output; we can only compare to a check file.
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2015, Oracle and/or its affiliates. All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#-----------------------------------------------------------------------
+
+seq=`basename "$0"`
+seqres="$RESULT_DIR/$seq"
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+ cd /
+ rm -rf "$tmp".* "$TESTDIR"
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+. ./common/reflink
+
+# real QA test starts here
+_supported_os Linux
+_require_scratch_reflink
+_require_xfs_io_command "falloc"
+
+rm -f "$seqres.full"
+
+PAGESZ=$(getconf PAGE_SIZE)
+BLKSZ=$((PAGESZ / 4))
+
+echo "Format and mount"
+_scratch_mkfs_blocksized $BLKSZ > "$seqres.full" 2>&1
+_scratch_mount >> "$seqres.full" 2>&1
+
+TESTDIR="$SCRATCH_MNT/test-$seq"
+rm -rf $TESTDIR
+mkdir $TESTDIR
+
+REAL_BLKSZ=$(stat -f -c '%S' $TESTDIR)
+test "$REAL_BLKSZ" != "$BLKSZ" && _notrun "Failed to format with small blocksize."
+
+runtest() {
+ echo "runtest $1 $2"
+ b2=$1
+ b4=$2
+ dir=$3
+
+ echo "Create the original files"
+ mkdir -p "$dir"
+ _pwrite_byte 0x61 0 $PAGESZ "$dir/file1" >> "$seqres.full"
+
+ "$XFS_IO_PROG" -f -c "truncate $PAGESZ" "$dir/file2" >> "$seqres.full"
+ "$XFS_IO_PROG" -f -c "truncate $PAGESZ" "$dir/file2.chk" >> "$seqres.full"
+
+ case "$b2" in
+ "regular")
+ _pwrite_byte 0x61 $BLKSZ $BLKSZ "$dir/file2" >> "$seqres.full"
+ _pwrite_byte 0x61 $BLKSZ $BLKSZ "$dir/file2.chk" >> "$seqres.full"
+ ;;
+ "unwritten")
+ "$XFS_IO_PROG" -f -c "falloc -k $BLKSZ $BLKSZ" "$dir/file2" >> "$seqres.full"
+ _pwrite_byte 0x00 $BLKSZ $BLKSZ "$dir/file2.chk" >> "$seqres.full"
+ ;;
+ "hole")
+ ;;
+ esac
+
+
+
+ case "$b4" in
+ "regular")
+ _pwrite_byte 0x61 $((BLKSZ * 3)) $BLKSZ "$dir/file2" >> "$seqres.full"
+ _pwrite_byte 0x61 $((BLKSZ * 3)) $BLKSZ "$dir/file2.chk" >> "$seqres.full"
+ ;;
+ "unwritten")
+ "$XFS_IO_PROG" -f -c "falloc -k $((BLKSZ * 3)) $BLKSZ" "$dir/file2" >> "$seqres.full"
+ _pwrite_byte 0x00 $((BLKSZ * 3)) $BLKSZ "$dir/file2.chk" >> "$seqres.full"
+ ;;
+ "hole")
+ ;;
+ esac
+
+ _reflink_range "$dir/file1" $BLKSZ "$dir/file2" $((BLKSZ * 2)) $BLKSZ >> "$seqres.full"
+ _pwrite_byte 0x61 $((BLKSZ * 2)) $BLKSZ "$dir/file2.chk" >> "$seqres.full"
+ _scratch_remount
+
+ echo "Compare files"
+ ! cmp -s "$dir/file1" "$dir/file2" || _fail "file1 and file2 don't match."
+ cmp -s "$dir/file2" "$dir/file2.chk" || _fail "file2 and file2.chk don't match."
+
+ echo "CoW and unmount"
+ if [ "$b2" = "delalloc" ]; then
+ _pwrite_byte 0x61 $BLKSZ $BLKSZ "$dir/file2" >> "$seqres.full"
+ _pwrite_byte 0x61 $BLKSZ $BLKSZ "$dir/file2.chk" >> "$seqres.full"
+ fi
+
+ if [ "$b4" = "delalloc" ]; then
+ _pwrite_byte 0x61 $((BLKSZ * 3)) $BLKSZ "$dir/file2" >> "$seqres.full"
+ _pwrite_byte 0x61 $((BLKSZ * 3)) $BLKSZ "$dir/file2.chk" >> "$seqres.full"
+ fi
+
+ "$XFS_IO_PROG" -f -c "pwrite -S 0x63 $((BLKSZ + 17)) $((BLKSZ * 3 - 34))" "$dir/file2" >> "$seqres.full"
+ "$XFS_IO_PROG" -f -c "pwrite -S 0x63 $((BLKSZ + 17)) $((BLKSZ * 3 - 34))" "$dir/file2.chk" >> "$seqres.full"
+ _scratch_remount
+
+ echo "Compare files"
+ ! cmp -s "$dir/file1" "$dir/file2" || _fail "file1 and file2 don't match."
+ cmp -s "$dir/file2" "$dir/file2.chk" || _fail "file2 and file2.chk don't match."
+}
+
+runtest regular delalloc "$TESTDIR/r-d"
+runtest regular unwritten "$TESTDIR/r-u"
+runtest regular hole "$TESTDIR/r-h"
+runtest regular regular "$TESTDIR/r-r"
+
+runtest hole delalloc "$TESTDIR/h-d"
+runtest hole unwritten "$TESTDIR/h-u"
+runtest hole hole "$TESTDIR/h-h"
+runtest hole regular "$TESTDIR/h-r"
+
+runtest unwritten delalloc "$TESTDIR/u-d"
+runtest unwritten unwritten "$TESTDIR/u-u"
+runtest unwritten hole "$TESTDIR/u-h"
+runtest unwritten regular "$TESTDIR/u-r"
+
+runtest delalloc delalloc "$TESTDIR/d-d"
+runtest delalloc unwritten "$TESTDIR/d-u"
+runtest delalloc hole "$TESTDIR/d-h"
+runtest delalloc regular "$TESTDIR/d-r"
+
+echo "Check for damage"
+umount "$SCRATCH_MNT"
+_check_scratch_fs
+
+# success, all done
+status=0
+exit
diff --git a/tests/generic/876.out b/tests/generic/876.out
new file mode 100644
index 0000000..b93781d
--- /dev/null
+++ b/tests/generic/876.out
@@ -0,0 +1,83 @@
+QA output created by 876
+Format and mount
+runtest regular delalloc
+Create the original files
+Compare files
+CoW and unmount
+Compare files
+runtest regular unwritten
+Create the original files
+Compare files
+CoW and unmount
+Compare files
+runtest regular hole
+Create the original files
+Compare files
+CoW and unmount
+Compare files
+runtest regular regular
+Create the original files
+Compare files
+CoW and unmount
+Compare files
+runtest hole delalloc
+Create the original files
+Compare files
+CoW and unmount
+Compare files
+runtest hole unwritten
+Create the original files
+Compare files
+CoW and unmount
+Compare files
+runtest hole hole
+Create the original files
+Compare files
+CoW and unmount
+Compare files
+runtest hole regular
+Create the original files
+Compare files
+CoW and unmount
+Compare files
+runtest unwritten delalloc
+Create the original files
+Compare files
+CoW and unmount
+Compare files
+runtest unwritten unwritten
+Create the original files
+Compare files
+CoW and unmount
+Compare files
+runtest unwritten hole
+Create the original files
+Compare files
+CoW and unmount
+Compare files
+runtest unwritten regular
+Create the original files
+Compare files
+CoW and unmount
+Compare files
+runtest delalloc delalloc
+Create the original files
+Compare files
+CoW and unmount
+Compare files
+runtest delalloc unwritten
+Create the original files
+Compare files
+CoW and unmount
+Compare files
+runtest delalloc hole
+Create the original files
+Compare files
+CoW and unmount
+Compare files
+runtest delalloc regular
+Create the original files
+Compare files
+CoW and unmount
+Compare files
+Check for damage
diff --git a/tests/generic/877 b/tests/generic/877
new file mode 100755
index 0000000..dc063f9
--- /dev/null
+++ b/tests/generic/877
@@ -0,0 +1,163 @@
+#! /bin/bash
+# FS QA Test No. 877
+#
+# See what happens if we DIO CoW blocks 2-4 of a page's worth of blocks when
+# the surrounding blocks vary between unwritten/regular/delalloc/hole.
+#
+# This test is dependent on the system page size, so we cannot use md5 in
+# the golden output; we can only compare to a check file.
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2015, Oracle and/or its affiliates. All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#-----------------------------------------------------------------------
+
+seq=`basename "$0"`
+seqres="$RESULT_DIR/$seq"
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+ cd /
+ rm -rf "$tmp".* "$TESTDIR"
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+. ./common/reflink
+
+# real QA test starts here
+_supported_os Linux
+_require_scratch_reflink
+_require_xfs_io_command "falloc"
+
+rm -f "$seqres.full"
+
+PAGESZ=$(getconf PAGE_SIZE)
+BLKSZ=$((PAGESZ / 4))
+
+echo "Format and mount"
+_scratch_mkfs_blocksized $BLKSZ > "$seqres.full" 2>&1
+_scratch_mount >> "$seqres.full" 2>&1
+
+TESTDIR="$SCRATCH_MNT/test-$seq"
+rm -rf $TESTDIR
+mkdir $TESTDIR
+
+REAL_BLKSZ=$(stat -f -c '%S' $TESTDIR)
+test "$REAL_BLKSZ" != "$BLKSZ" && _notrun "Failed to format with small blocksize."
+
+runtest() {
+ echo "runtest $1 $2"
+ b2=$1
+ b4=$2
+ dir=$3
+
+ echo "Create the original files"
+ mkdir -p "$dir"
+ _pwrite_byte 0x61 0 $PAGESZ "$dir/file1" >> "$seqres.full"
+
+ "$XFS_IO_PROG" -f -c "truncate $PAGESZ" "$dir/file2" >> "$seqres.full"
+ "$XFS_IO_PROG" -f -c "truncate $PAGESZ" "$dir/file2.chk" >> "$seqres.full"
+
+ case "$b2" in
+ "regular")
+ _pwrite_byte 0x61 $BLKSZ $BLKSZ "$dir/file2" >> "$seqres.full"
+ _pwrite_byte 0x61 $BLKSZ $BLKSZ "$dir/file2.chk" >> "$seqres.full"
+ ;;
+ "unwritten")
+ "$XFS_IO_PROG" -f -c "falloc -k $BLKSZ $BLKSZ" "$dir/file2" >> "$seqres.full"
+ _pwrite_byte 0x00 $BLKSZ $BLKSZ "$dir/file2.chk" >> "$seqres.full"
+ ;;
+ "hole")
+ ;;
+ esac
+
+
+
+ case "$b4" in
+ "regular")
+ _pwrite_byte 0x61 $((BLKSZ * 3)) $BLKSZ "$dir/file2" >> "$seqres.full"
+ _pwrite_byte 0x61 $((BLKSZ * 3)) $BLKSZ "$dir/file2.chk" >> "$seqres.full"
+ ;;
+ "unwritten")
+ "$XFS_IO_PROG" -f -c "falloc -k $((BLKSZ * 3)) $BLKSZ" "$dir/file2" >> "$seqres.full"
+ _pwrite_byte 0x00 $((BLKSZ * 3)) $BLKSZ "$dir/file2.chk" >> "$seqres.full"
+ ;;
+ "hole")
+ ;;
+ esac
+
+ _reflink_range "$dir/file1" $BLKSZ "$dir/file2" $((BLKSZ * 2)) $BLKSZ >> "$seqres.full"
+ _pwrite_byte 0x61 $((BLKSZ * 2)) $BLKSZ "$dir/file2.chk" >> "$seqres.full"
+ _scratch_remount
+
+ echo "Compare files"
+ ! cmp -s "$dir/file1" "$dir/file2" || _fail "file1 and file2 don't match."
+ cmp -s "$dir/file2" "$dir/file2.chk" || _fail "file2 and file2.chk don't match."
+
+ echo "CoW and unmount"
+ if [ "$b2" = "delalloc" ]; then
+ _pwrite_byte 0x61 $BLKSZ $BLKSZ "$dir/file2" >> "$seqres.full"
+ _pwrite_byte 0x61 $BLKSZ $BLKSZ "$dir/file2.chk" >> "$seqres.full"
+ fi
+
+ if [ "$b4" = "delalloc" ]; then
+ _pwrite_byte 0x61 $((BLKSZ * 3)) $BLKSZ "$dir/file2" >> "$seqres.full"
+ _pwrite_byte 0x61 $((BLKSZ * 3)) $BLKSZ "$dir/file2.chk" >> "$seqres.full"
+ fi
+
+ "$XFS_IO_PROG" -d -f -c "pwrite -S 0x63 $BLKSZ $((BLKSZ * 3))" "$dir/file2" >> "$seqres.full"
+ "$XFS_IO_PROG" -f -c "pwrite -S 0x63 $BLKSZ $((BLKSZ * 3))" "$dir/file2.chk" >> "$seqres.full"
+ _scratch_remount
+
+ echo "Compare files"
+ ! cmp -s "$dir/file1" "$dir/file2" || _fail "file1 and file2 don't match."
+ cmp -s "$dir/file2" "$dir/file2.chk" || _fail "file2 and file2.chk don't match."
+}
+
+runtest regular delalloc "$TESTDIR/r-d"
+runtest regular unwritten "$TESTDIR/r-u"
+runtest regular hole "$TESTDIR/r-h"
+runtest regular regular "$TESTDIR/r-r"
+
+runtest hole delalloc "$TESTDIR/h-d"
+runtest hole unwritten "$TESTDIR/h-u"
+runtest hole hole "$TESTDIR/h-h"
+runtest hole regular "$TESTDIR/h-r"
+
+runtest unwritten delalloc "$TESTDIR/u-d"
+runtest unwritten unwritten "$TESTDIR/u-u"
+runtest unwritten hole "$TESTDIR/u-h"
+runtest unwritten regular "$TESTDIR/u-r"
+
+runtest delalloc delalloc "$TESTDIR/d-d"
+runtest delalloc unwritten "$TESTDIR/d-u"
+runtest delalloc hole "$TESTDIR/d-h"
+runtest delalloc regular "$TESTDIR/d-r"
+
+echo "Check for damage"
+umount "$SCRATCH_MNT"
+_check_scratch_fs
+
+# success, all done
+status=0
+exit
diff --git a/tests/generic/877.out b/tests/generic/877.out
new file mode 100644
index 0000000..b97ef2f
--- /dev/null
+++ b/tests/generic/877.out
@@ -0,0 +1,83 @@
+QA output created by 877
+Format and mount
+runtest regular delalloc
+Create the original files
+Compare files
+CoW and unmount
+Compare files
+runtest regular unwritten
+Create the original files
+Compare files
+CoW and unmount
+Compare files
+runtest regular hole
+Create the original files
+Compare files
+CoW and unmount
+Compare files
+runtest regular regular
+Create the original files
+Compare files
+CoW and unmount
+Compare files
+runtest hole delalloc
+Create the original files
+Compare files
+CoW and unmount
+Compare files
+runtest hole unwritten
+Create the original files
+Compare files
+CoW and unmount
+Compare files
+runtest hole hole
+Create the original files
+Compare files
+CoW and unmount
+Compare files
+runtest hole regular
+Create the original files
+Compare files
+CoW and unmount
+Compare files
+runtest unwritten delalloc
+Create the original files
+Compare files
+CoW and unmount
+Compare files
+runtest unwritten unwritten
+Create the original files
+Compare files
+CoW and unmount
+Compare files
+runtest unwritten hole
+Create the original files
+Compare files
+CoW and unmount
+Compare files
+runtest unwritten regular
+Create the original files
+Compare files
+CoW and unmount
+Compare files
+runtest delalloc delalloc
+Create the original files
+Compare files
+CoW and unmount
+Compare files
+runtest delalloc unwritten
+Create the original files
+Compare files
+CoW and unmount
+Compare files
+runtest delalloc hole
+Create the original files
+Compare files
+CoW and unmount
+Compare files
+runtest delalloc regular
+Create the original files
+Compare files
+CoW and unmount
+Compare files
+Check for damage
diff --git a/tests/generic/group b/tests/generic/group
index ea4901b..f3e3e2c 100644
--- a/tests/generic/group
+++ b/tests/generic/group
@@ -279,3 +279,13 @@
865 auto quick clone
866 auto quick clone
867 auto quick clone
+868 auto quick clone
+869 auto quick clone
+870 auto quick clone
+871 auto quick clone
+872 auto quick clone
+873 auto quick clone
+874 auto quick clone
+875 auto quick clone
+876 auto quick clone
+877 auto quick clone
_______________________________________________
xfs mailing list
xfs@xxxxxxxxxxx
http://oss.sgi.com/mailman/listinfo/xfs
