Ugh, sorry. Can someone explain this email thing to me? > On Dec 3, 2015, at 5:24 PM, Eric Sandeen <sandeen@xxxxxxxxxxx> wrote: > > (try again, replying to list this time, doh!) > >> On 12/3/15 12:48 PM, Reinoud Koornstra wrote: >> Hi Everyone, >> >> Periodically I seem to have some issues with xfs on my SSD. >> smartd reports this: >> >> Device: /dev/sdb [SAT], Crucial_CT256M550SSD3, S/N:15020ED48DF8, >> WWN:5-00a075-10ed48df8, FW:MU02, 256 GB >> >> reinoud@Mipam:~$ uname -a >> Linux Mipam 4.1.10-custom #1 SMP Tue Oct 20 11:20:40 MDT 2015 x86_64 >> x86_64 x86_64 GNU/Linux >> >> The distro is ubuntu 14.04 >> reinoud@Mipam:~$ xfs_repair -V >> xfs_repair version 3.2.3 >> >> I am not sure if I have any errors, but I did get problems building >> some stuff after a simple hg clone or git clone that others aren't >> seeing. > > Missing build dependencies maybe? What problems? > >> Earlier I did disable the write cache back. >> I just did run an xfs_repair: >> >> reinoud@Mipam:~$ sudo xfs_repair -v /dev/sdb1 >> Phase 1 - find and verify superblock... >> - block cache size set to 1515280 entries >> Phase 2 - using internal log >> - zero log... >> zero_log: head block 26744 tail block 26744 >> - scan filesystem freespace and inode maps... >> - found root inode chunk >> Phase 3 - for each AG... >> - scan and clear agi unlinked lists... >> - process known inodes and perform inode discovery... >> - agno = 0 >> - agno = 1 >> - agno = 2 >> - agno = 3 >> - process newly discovered inodes... >> Phase 4 - check for duplicate blocks... >> - setting up duplicate extent list... >> - check for inodes claiming duplicate blocks... >> - agno = 0 >> - agno = 1 >> - agno = 2 >> - agno = 3 >> Phase 5 - rebuild AG headers and trees... >> - agno = 0 >> - agno = 1 >> - agno = 2 >> - agno = 3 >> - reset superblock... >> Phase 6 - check inode connectivity... >> - resetting contents of realtime bitmap and summary inodes >> - traversing filesystem ... >> - agno = 0 >> - agno = 1 >> - agno = 2 >> - agno = 3 >> - traversal finished ... >> - moving disconnected inodes to lost+found ... >> Phase 7 - verify and correct link counts... >> >> XFS_REPAIR Summary Thu Dec 3 11:37:01 2015 >> >> Phase Start End Duration >> Phase 1: 12/03 11:36:21 12/03 11:36:21 >> Phase 2: 12/03 11:36:21 12/03 11:36:27 6 seconds >> Phase 3: 12/03 11:36:27 12/03 11:36:55 28 seconds >> Phase 4: 12/03 11:36:55 12/03 11:36:58 3 seconds >> Phase 5: 12/03 11:36:58 12/03 11:36:58 >> Phase 6: 12/03 11:36:58 12/03 11:37:01 3 seconds >> Phase 7: 12/03 11:37:01 12/03 11:37:01 >> >> Total run time: 40 seconds >> done >> Did I have errors? I saw disconnected inodes, but other than that..... > > No, that was a clean repair run. > > -Eric > > _______________________________________________ xfs mailing list xfs@xxxxxxxxxxx http://oss.sgi.com/mailman/listinfo/xfs
