On Wed, Dec 02, 2015 at 01:07:56PM +0200, Avi Kivity wrote: > Removing a directory with ~900 32MB files, we saw this: > > [ 5645.684464] INFO: task xfsaild/md0:12247 blocked for more than > 120 seconds. > [ 5645.686488] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" > disables this message. > [ 5645.687713] xfsaild/md0 D ffff88103f9d3680 0 12247 2 > 0x00000080 > [ 5645.687729] ffff8810136f7d40 0000000000000046 ffff882026d82220 > ffff8810136f7fd8 > [ 5645.687732] ffff8810136f7fd8 ffff8810136f7fd8 ffff882026d82220 > ffff882026d82220 > [ 5645.687734] ffff88103f9d44c0 0000000000000001 0000000000000000 > ffff8820285aa928 > [ 5645.687737] Call Trace: > [ 5645.687747] [<ffffffff816098d9>] schedule+0x29/0x70 > [ 5645.687768] [<ffffffffa06cd880>] _xfs_log_force+0x230/0x290 [xfs] > [ 5645.687773] [<ffffffff810a9510>] ? wake_up_state+0x20/0x20 > [ 5645.687796] [<ffffffffa06cd906>] xfs_log_force+0x26/0x80 [xfs] > [ 5645.687808] [<ffffffffa06d2380>] ? > xfs_trans_ail_cursor_first+0x90/0x90 [xfs] > [ 5645.687818] [<ffffffffa06d24d1>] xfsaild+0x151/0x5e0 [xfs] > [ 5645.687828] [<ffffffffa06d2380>] ? > xfs_trans_ail_cursor_first+0x90/0x90 [xfs] > [ 5645.687831] [<ffffffff8109727f>] kthread+0xcf/0xe0 > [ 5645.687834] [<ffffffff810971b0>] ? kthread_create_on_node+0x140/0x140 > [ 5645.687837] [<ffffffff81614358>] ret_from_fork+0x58/0x90 > [ 5645.687852] [<ffffffff810971b0>] ? kthread_create_on_node+0x140/0x140 > > 'rm' did not complete, but was killable. Nothing else was running > on the system at the time. Which means the filesystem was not hung, nor was rm blocked in XFS. That implies the directory/inode reads that rm does were running really slowly. Something else going on here. > The filesystem was mounted with the discard option set, but since > that is discouraged, we'll retry without it. Ah, yes, that could cause exactly these symptoms. I'd guess you are using storage that has unqueued TRIM operations (i.e. SATA 3.0 hardware somewhere in your storage path, as queued TRIM only came along with SATA 3.1 and AFAIA there's not a lot of 3.1 hardware out there yet) which means while discards are being issued all other IO tanks and goes really slow. We have seen individual TRIM requests on some SSDs take tens of milliseconds to complete, regardless of their size. Hence if you have one of these devices and you're running thousands of TRIM commands across ~30GB of data being freed, then you'd see things like rm being really slow on the read side and log forces waiting an awful long time for journal IO completion processing to take place... Cheers, Dave. -- Dave Chinner david@xxxxxxxxxxxxx _______________________________________________ xfs mailing list xfs@xxxxxxxxxxx http://oss.sgi.com/mailman/listinfo/xfs
