[PATCH 05/12] reflink: test CoW behaviors of reflinked files

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Ensure that CoW happens correctly with buffered, directio, and mmap writes.

Signed-off-by: Darrick J. Wong <darrick.wong@xxxxxxxxxx>
---
 tests/generic/138     |  152 +++++++++++++++++++++++++++++++++++++++++++++++++
 tests/generic/138.out |   19 ++++++
 tests/generic/139     |  151 +++++++++++++++++++++++++++++++++++++++++++++++++
 tests/generic/139.out |   19 ++++++
 tests/generic/140     |  152 +++++++++++++++++++++++++++++++++++++++++++++++++
 tests/generic/140.out |   19 ++++++
 tests/generic/142     |   91 +++++++++++++++++++++++++++++
 tests/generic/142.out |    8 +++
 tests/generic/143     |   91 +++++++++++++++++++++++++++++
 tests/generic/143.out |    8 +++
 tests/generic/group   |    5 ++
 11 files changed, 715 insertions(+)
 create mode 100755 tests/generic/138
 create mode 100644 tests/generic/138.out
 create mode 100755 tests/generic/139
 create mode 100644 tests/generic/139.out
 create mode 100755 tests/generic/140
 create mode 100644 tests/generic/140.out
 create mode 100755 tests/generic/142
 create mode 100644 tests/generic/142.out
 create mode 100755 tests/generic/143
 create mode 100644 tests/generic/143.out


diff --git a/tests/generic/138 b/tests/generic/138
new file mode 100755
index 0000000..c084679
--- /dev/null
+++ b/tests/generic/138
@@ -0,0 +1,152 @@
+#! /bin/bash
+# FS QA Test No. 138
+#
+# Ensuring that copy on write through the page cache works:
+#   - Reflink two files together
+#   - Write to the beginning, middle, and end
+#   - Check that the files are now different where we say they're different.
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2015, Oracle and/or its affiliates.  All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc.,  51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+#-----------------------------------------------------------------------
+
+seq=`basename "$0"`
+seqres="$RESULT_DIR/$seq"
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1    # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+    cd /
+    rm -rf "$tmp".* "$TESTDIR"
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+. ./common/reflink
+
+# real QA test starts here
+_supported_os Linux
+_require_test_reflink
+_require_cp_reflink
+
+rm -f "$seqres.full"
+
+TESTDIR="$TEST_DIR/test-$seq"
+rm -rf "$TESTDIR"
+mkdir "$TESTDIR"
+
+echo "Create the original files"
+BLKSZ=65536
+_pwrite_byte 0x61 0 $((BLKSZ * 48 - 3)) "$TESTDIR/file1" >> "$seqres.full"
+_cp_reflink "$TESTDIR/file1" "$TESTDIR/file2" >> "$seqres.full"
+_pwrite_byte 0x61 0 $((BLKSZ * 48 - 3)) "$TESTDIR/file3" >> "$seqres.full"
+_test_remount
+
+echo "Compare files"
+md5sum "$TESTDIR/file1" | _filter_test_dir
+md5sum "$TESTDIR/file2" | _filter_test_dir
+md5sum "$TESTDIR/file3" | _filter_test_dir
+
+cmp -s "$TESTDIR/file1" "$TESTDIR/file2" || echo "Files 1-2 do not match"
+cmp -s "$TESTDIR/file1" "$TESTDIR/file3" || echo "Files 1-3 do not match"
+cmp -s "$TESTDIR/file2" "$TESTDIR/file3" || echo "Files 2-3 do not match"
+
+echo "pagecache CoW the second file"
+_pwrite_byte 0x62 0 17 "$TESTDIR/file2" >> "$seqres.full"
+_pwrite_byte 0x62 0 17 "$TESTDIR/file3" >> "$seqres.full"
+
+_pwrite_byte 0x62 $((BLKSZ * 16 - 34)) 17 "$TESTDIR/file2" >> "$seqres.full"
+_pwrite_byte 0x62 $((BLKSZ * 16 - 34)) 17 "$TESTDIR/file3" >> "$seqres.full"
+
+_pwrite_byte 0x62 $((BLKSZ * 48 - 8)) 17 "$TESTDIR/file2" >> "$seqres.full"
+_pwrite_byte 0x62 $((BLKSZ * 48 - 8)) 17 "$TESTDIR/file3" >> "$seqres.full"
+_test_remount
+
+echo "Compare files"
+md5sum "$TESTDIR/file1" | _filter_test_dir
+md5sum "$TESTDIR/file2" | _filter_test_dir
+md5sum "$TESTDIR/file3" | _filter_test_dir
+
+cmp -s "$TESTDIR/file1" "$TESTDIR/file2" || echo "Files 1-2 do not match (intentional)"
+cmp -s "$TESTDIR/file1" "$TESTDIR/file3" || echo "Files 1-3 do not match (intentional)"
+cmp -s "$TESTDIR/file2" "$TESTDIR/file3" || echo "Files 2-3 do not match"
+
+echo "Compare the CoW'd section to the before file"
+_compare_range "$TESTDIR/file1" 0 "$TESTDIR/file2" 0 17 \
+       || echo "Start sections do not match (intentional)"
+
+_compare_range  "$TESTDIR/file1" $((BLKSZ * 16 - 34)) \
+		"$TESTDIR/file2" $((BLKSZ * 16 - 34)) 17 \
+       || echo "Middle sections do not match (intentional)"
+
+_compare_range  "$TESTDIR/file1" $((BLKSZ * 48 - 8)) \
+		"$TESTDIR/file2" $((BLKSZ * 48 - 8)) 17 \
+       || echo "End sections do not match (intentional)"
+
+echo "Compare the CoW'd section to the after file"
+_compare_range "$TESTDIR/file2" 0 "$TESTDIR/file3" 0 17 \
+       || echo "Start sections do not match"
+
+_compare_range  "$TESTDIR/file2" $((BLKSZ * 16 - 34)) \
+		"$TESTDIR/file3" $((BLKSZ * 16 - 34)) 17 \
+       || echo "Middle sections do not match"
+
+_compare_range  "$TESTDIR/file2" $((BLKSZ * 48 - 8)) \
+		"$TESTDIR/file3" $((BLKSZ * 48 - 8)) 17 \
+       || echo "End sections do not match"
+
+echo "Compare the not CoW'd sections"
+_compare_range "$TESTDIR/file1" 18 "$TESTDIR/file2" 18 17 \
+       || echo "Start sections of 1-2 do not match"
+
+_compare_range "$TESTDIR/file2" 18 "$TESTDIR/file3" 18 17 \
+       || echo "Start sections of 2-3 do not match"
+
+
+_compare_range  "$TESTDIR/file1" $((BLKSZ * 16 - 17)) \
+		"$TESTDIR/file2" $((BLKSZ * 16 - 17)) 82 \
+       || echo "Middle sections of 1-2 do not match"
+
+_compare_range  "$TESTDIR/file2" $((BLKSZ * 16 - 17)) \
+		"$TESTDIR/file3" $((BLKSZ * 16 - 17)) 82 \
+       || echo "Middle sections of 2-3 do not match"
+
+_compare_range  "$TESTDIR/file1" $((BLKSZ * 48 - 108)) \
+		"$TESTDIR/file2" $((BLKSZ * 48 - 108)) 100 \
+       || echo "End sections of 1-2 do not match"
+
+_compare_range  "$TESTDIR/file2" $((BLKSZ * 48 - 108)) \
+		"$TESTDIR/file3" $((BLKSZ * 48 - 108)) 100 \
+       || echo "End sections of 2-3 do not match"
+
+
+_compare_range  "$TESTDIR/file1" $((BLKSZ * 14)) \
+		"$TESTDIR/file2" $((BLKSZ * 14)) $BLKSZ \
+       || echo "Untouched sections of 1-2 do not match"
+
+_compare_range  "$TESTDIR/file2" $((BLKSZ * 14)) \
+		"$TESTDIR/file3" $((BLKSZ * 14)) $BLKSZ \
+       || echo "Untouched sections of 2-3 do not match"
+
+# success, all done
+status=0
+exit
diff --git a/tests/generic/138.out b/tests/generic/138.out
new file mode 100644
index 0000000..b0cafab
--- /dev/null
+++ b/tests/generic/138.out
@@ -0,0 +1,19 @@
+QA output created by 138
+Create the original files
+Compare files
+60ebe700450b6015c17fa15cacb9493b  TEST_DIR/test-138/file1
+60ebe700450b6015c17fa15cacb9493b  TEST_DIR/test-138/file2
+60ebe700450b6015c17fa15cacb9493b  TEST_DIR/test-138/file3
+pagecache CoW the second file
+Compare files
+60ebe700450b6015c17fa15cacb9493b  TEST_DIR/test-138/file1
+4a879c2f322121f6f4b8ebede1909a7c  TEST_DIR/test-138/file2
+4a879c2f322121f6f4b8ebede1909a7c  TEST_DIR/test-138/file3
+Files 1-2 do not match (intentional)
+Files 1-3 do not match (intentional)
+Compare the CoW'd section to the before file
+Start sections do not match (intentional)
+Middle sections do not match (intentional)
+End sections do not match (intentional)
+Compare the CoW'd section to the after file
+Compare the not CoW'd sections
diff --git a/tests/generic/139 b/tests/generic/139
new file mode 100755
index 0000000..54c68fb
--- /dev/null
+++ b/tests/generic/139
@@ -0,0 +1,151 @@
+#! /bin/bash
+# FS QA Test No. 139
+#
+# Ensuring that copy on write in direct-io mode works:
+#   - Reflink two files together
+#   - Write to the beginning, middle, and end in direct-io mode
+#   - Check that the files are now different where we say they're different.
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2015, Oracle and/or its affiliates.  All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc.,  51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+#-----------------------------------------------------------------------
+
+seq=`basename "$0"`
+seqres="$RESULT_DIR/$seq"
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1    # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+    cd /
+    rm -rf "$tmp".* "$TESTDIR"
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+. ./common/reflink
+
+# real QA test starts here
+_supported_os Linux
+_require_test_reflink
+_require_cp_reflink
+
+rm -f "$seqres.full"
+
+TESTDIR=$TEST_DIR/test-$seq
+rm -rf $TESTDIR
+mkdir $TESTDIR
+
+echo "Create the original files"
+BLKSZ=65536
+_pwrite_byte 0x61 0 $((BLKSZ * 48 - 3)) "$TESTDIR/file1" >> "$seqres.full"
+_cp_reflink "$TESTDIR/file1" "$TESTDIR/file2" >> "$seqres.full"
+_pwrite_byte 0x61 0 $((BLKSZ * 48 - 3)) "$TESTDIR/file3" >> "$seqres.full"
+_test_remount
+
+echo "Compare files"
+md5sum "$TESTDIR/file1" | _filter_test_dir
+md5sum "$TESTDIR/file2" | _filter_test_dir
+md5sum "$TESTDIR/file3" | _filter_test_dir
+
+cmp -s "$TESTDIR/file1" "$TESTDIR/file2" || echo "Files 1-2 should match"
+cmp -s "$TESTDIR/file1" "$TESTDIR/file3" || echo "Files 1-3 should match"
+cmp -s "$TESTDIR/file2" "$TESTDIR/file3" || echo "Files 2-3 should match"
+
+echo "directio CoW the second file"
+_pwrite_byte 0x62 0 $BLKSZ "$TESTDIR/file2" -d >> "$seqres.full"
+_pwrite_byte 0x62 0 $BLKSZ "$TESTDIR/file3" -d >> "$seqres.full"
+
+_pwrite_byte 0x62 $((BLKSZ * 16 - 512)) 512 "$TESTDIR/file2" -d >> "$seqres.full"
+_pwrite_byte 0x62 $((BLKSZ * 16 - 512)) 512 "$TESTDIR/file3" -d >> "$seqres.full"
+
+_pwrite_byte 0x62 $((BLKSZ * 48)) $BLKSZ "$TESTDIR/file2" -d >> "$seqres.full"
+_pwrite_byte 0x62 $((BLKSZ * 48)) $BLKSZ "$TESTDIR/file3" -d >> "$seqres.full"
+_test_remount
+
+echo "Compare files"
+md5sum "$TESTDIR/file1" | _filter_test_dir
+md5sum "$TESTDIR/file2" | _filter_test_dir
+md5sum "$TESTDIR/file3" | _filter_test_dir
+
+cmp -s "$TESTDIR/file1" "$TESTDIR/file2" || echo "Files 1-2 should not match (intentional)"
+cmp -s "$TESTDIR/file1" "$TESTDIR/file3" || echo "Files 1-3 should not match (intentional)"
+cmp -s "$TESTDIR/file2" "$TESTDIR/file3" || echo "Files 2-3 should match"
+
+echo "Compare the CoW'd section to the before file"
+_compare_range "$TESTDIR/file1" 0 "$TESTDIR/file2" 0 $BLKSZ \
+       || echo "Start sections do not match (intentional)"
+
+_compare_range  "$TESTDIR/file1" $((BLKSZ * 16 - 512)) \
+		"$TESTDIR/file2" $((BLKSZ * 16 - 512)) 512 \
+       || echo "Middle sections do not match (intentional)"
+
+_compare_range  "$TESTDIR/file1" $((BLKSZ * 48 - 512)) \
+		"$TESTDIR/file2" $((BLKSZ * 48 - 512)) $BLKSZ \
+       || echo "End sections do not match (intentional)"
+
+echo "Compare the CoW'd section to the after file"
+_compare_range "$TESTDIR/file2" 0 "$TESTDIR/file3" 0 $BLKSZ \
+       || echo "Start sections do not match"
+
+_compare_range  "$TESTDIR/file2" $((BLKSZ * 16 - 512)) \
+		"$TESTDIR/file3" $((BLKSZ * 16 - 512)) 512 \
+       || echo "Middle sections do not match"
+
+_compare_range  "$TESTDIR/file2" $((BLKSZ * 48 - 512)) \
+		"$TESTDIR/file3" $((BLKSZ * 48 - 512)) $BLKSZ \
+       || echo "End sections do not match"
+
+echo "Compare the not CoW'd sections"
+_compare_range "$TESTDIR/file1" $BLKSZ "$TESTDIR/file2" $BLKSZ 512 \
+       || echo "Start sections of 1-2 do not match"
+_compare_range "$TESTDIR/file2" $BLKSZ "$TESTDIR/file3" $BLKSZ 512 \
+       || echo "Start sections of 2-3 do not match"
+
+
+_compare_range  "$TESTDIR/file1" $((BLKSZ * 16 - 1024)) \
+		"$TESTDIR/file2" $((BLKSZ * 16 - 1024)) 512 \
+       || echo "Middle sections of 1-2 do not match"
+
+_compare_range  "$TESTDIR/file2" $((BLKSZ * 16 - 1024)) \
+		"$TESTDIR/file3" $((BLKSZ * 16 - 1024)) 512 \
+       || echo "Middle sections of 2-3 do not match"
+
+_compare_range  "$TESTDIR/file1" $((BLKSZ * 48 - 1024)) \
+		"$TESTDIR/file2" $((BLKSZ * 48 - 1024)) 512 \
+       || echo "End sections of 1-2 do not match"
+
+_compare_range  "$TESTDIR/file2" $((BLKSZ * 48 - 1024)) \
+		"$TESTDIR/file3" $((BLKSZ * 48 - 1024)) 512 \
+       || echo "End sections of 2-3 do not match"
+
+
+_compare_range  "$TESTDIR/file1" $((BLKSZ * 16)) \
+		"$TESTDIR/file2" $((BLKSZ * 16)) 512 \
+       || echo "Untouched sections of 1-2 do not match"
+
+_compare_range  "$TESTDIR/file2" $((BLKSZ * 16)) \
+		"$TESTDIR/file3" $((BLKSZ * 16)) 512 \
+       || echo "Untouched sections of 2-3 do not match"
+
+# success, all done
+status=0
+exit
diff --git a/tests/generic/139.out b/tests/generic/139.out
new file mode 100644
index 0000000..28d04f5
--- /dev/null
+++ b/tests/generic/139.out
@@ -0,0 +1,19 @@
+QA output created by 139
+Create the original files
+Compare files
+60ebe700450b6015c17fa15cacb9493b  TEST_DIR/test-139/file1
+60ebe700450b6015c17fa15cacb9493b  TEST_DIR/test-139/file2
+60ebe700450b6015c17fa15cacb9493b  TEST_DIR/test-139/file3
+directio CoW the second file
+Compare files
+60ebe700450b6015c17fa15cacb9493b  TEST_DIR/test-139/file1
+ff5626fb6c71b242d6b1a43de25c9a85  TEST_DIR/test-139/file2
+ff5626fb6c71b242d6b1a43de25c9a85  TEST_DIR/test-139/file3
+Files 1-2 should not match (intentional)
+Files 1-3 should not match (intentional)
+Compare the CoW'd section to the before file
+Start sections do not match (intentional)
+Middle sections do not match (intentional)
+End sections do not match (intentional)
+Compare the CoW'd section to the after file
+Compare the not CoW'd sections
diff --git a/tests/generic/140 b/tests/generic/140
new file mode 100755
index 0000000..6299d8e
--- /dev/null
+++ b/tests/generic/140
@@ -0,0 +1,152 @@
+#! /bin/bash
+# FS QA Test No. 140
+#
+# Ensuring that mmap copy on write through the page cache works:
+#   - Reflink two files together
+#   - Write to the beginning, middle, and end
+#   - Check that the files are now different where we say they're different.
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2015, Oracle and/or its affiliates.  All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc.,  51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+#-----------------------------------------------------------------------
+
+seq=`basename "$0"`
+seqres="$RESULT_DIR/$seq"
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1    # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+    cd /
+    rm -rf "$tmp".* "$TESTDIR"
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+. ./common/reflink
+
+# real QA test starts here
+_supported_os Linux
+_require_test_reflink
+_require_cp_reflink
+
+rm -f "$seqres.full"
+
+TESTDIR="$TEST_DIR/test-$seq"
+rm -rf "$TESTDIR"
+mkdir "$TESTDIR"
+
+echo "Create the original files"
+BLKSZ=65536
+_pwrite_byte 0x61 0 $((BLKSZ * 48 - 3)) "$TESTDIR/file1" >> "$seqres.full"
+_cp_reflink "$TESTDIR/file1" "$TESTDIR/file2" >> "$seqres.full"
+_pwrite_byte 0x61 0 $((BLKSZ * 48 - 3)) "$TESTDIR/file3" >> "$seqres.full"
+_test_remount
+
+echo "Compare files"
+md5sum "$TESTDIR/file1" | _filter_test_dir
+md5sum "$TESTDIR/file2" | _filter_test_dir
+md5sum "$TESTDIR/file3" | _filter_test_dir
+
+cmp -s "$TESTDIR/file1" "$TESTDIR/file2" || echo "Files 1-2 do not match"
+cmp -s "$TESTDIR/file1" "$TESTDIR/file3" || echo "Files 1-3 do not match"
+cmp -s "$TESTDIR/file2" "$TESTDIR/file3" || echo "Files 2-3 do not match"
+
+echo "mmap CoW the second file"
+_mwrite_byte 0x62 0 17 $((BLKSZ * 48 - 3)) "$TESTDIR/file2" >> "$seqres.full"
+_mwrite_byte 0x62 0 17 $((BLKSZ * 48 - 3)) "$TESTDIR/file3" >> "$seqres.full"
+
+_mwrite_byte 0x62 $((BLKSZ * 16 - 34)) 17 $((BLKSZ * 48 - 3)) "$TESTDIR/file2" >> "$seqres.full"
+_mwrite_byte 0x62 $((BLKSZ * 16 - 34)) 17 $((BLKSZ * 48 - 3)) "$TESTDIR/file3" >> "$seqres.full"
+
+_mwrite_byte 0x62 $((BLKSZ * 48 - 20)) 17 $((BLKSZ * 48 - 3)) "$TESTDIR/file2" >> "$seqres.full"
+_mwrite_byte 0x62 $((BLKSZ * 48 - 20)) 17 $((BLKSZ * 48 - 3)) "$TESTDIR/file3" >> "$seqres.full"
+_test_remount
+
+echo "Compare files"
+md5sum "$TESTDIR/file1" | _filter_test_dir
+md5sum "$TESTDIR/file2" | _filter_test_dir
+md5sum "$TESTDIR/file3" | _filter_test_dir
+
+cmp -s "$TESTDIR/file1" "$TESTDIR/file2" || echo "Files 1-2 do not match (intentional)"
+cmp -s "$TESTDIR/file1" "$TESTDIR/file3" || echo "Files 1-3 do not match (intentional)"
+cmp -s "$TESTDIR/file2" "$TESTDIR/file3" || echo "Files 2-3 do not match"
+
+echo "Compare the CoW'd section to the before file"
+_compare_range "$TESTDIR/file1" 0 "$TESTDIR/file2" 0 17 \
+       || echo "Start sections do not match (intentional)"
+
+_compare_range  "$TESTDIR/file1" $((BLKSZ * 16 - 34)) \
+		"$TESTDIR/file2" $((BLKSZ * 16 - 34)) 17 \
+       || echo "Middle sections do not match (intentional)"
+
+_compare_range  "$TESTDIR/file1" $((BLKSZ * 48 - 20)) \
+		"$TESTDIR/file2" $((BLKSZ * 48 - 20)) 17 \
+       || echo "End sections do not match (intentional)"
+
+echo "Compare the CoW'd section to the after file"
+_compare_range "$TESTDIR/file2" 0 "$TESTDIR/file3" 0 17 \
+       || echo "Start sections do not match"
+
+_compare_range  "$TESTDIR/file2" $((BLKSZ * 16 - 34)) \
+		"$TESTDIR/file3" $((BLKSZ * 16 - 34)) 17 \
+       || echo "Middle sections do not match"
+
+_compare_range  "$TESTDIR/file2" $((BLKSZ * 48 - 20)) \
+		"$TESTDIR/file3" $((BLKSZ * 48 - 20)) 17 \
+       || echo "End sections do not match"
+
+echo "Compare the not CoW'd sections"
+_compare_range "$TESTDIR/file1" 18 "$TESTDIR/file2" 18 17 \
+       || echo "Start sections of 1-2 do not match"
+
+_compare_range "$TESTDIR/file2" 18 "$TESTDIR/file3" 18 17 \
+       || echo "Start sections of 2-3 do not match"
+
+
+_compare_range  "$TESTDIR/file1" $((BLKSZ * 16 - 17)) \
+		"$TESTDIR/file2" $((BLKSZ * 16 - 17)) 82 \
+       || echo "Middle sections of 1-2 do not match"
+
+_compare_range  "$TESTDIR/file2" $((BLKSZ * 16 - 17)) \
+		"$TESTDIR/file3" $((BLKSZ * 16 - 17)) 82 \
+       || echo "Middle sections of 2-3 do not match"
+
+_compare_range  "$TESTDIR/file1" $((BLKSZ * 48 - 120)) \
+		"$TESTDIR/file2" $((BLKSZ * 48 - 120)) 100 \
+       || echo "End sections of 1-2 do not match"
+
+_compare_range  "$TESTDIR/file2" $((BLKSZ * 48 - 120)) \
+		"$TESTDIR/file3" $((BLKSZ * 48 - 120)) 100 \
+       || echo "End sections of 2-3 do not match"
+
+
+_compare_range  "$TESTDIR/file1" $((BLKSZ * 14)) \
+		"$TESTDIR/file2" $((BLKSZ * 14)) $BLKSZ \
+       || echo "Untouched sections of 1-2 do not match"
+
+_compare_range  "$TESTDIR/file2" $((BLKSZ * 14)) \
+		"$TESTDIR/file3" $((BLKSZ * 14)) $BLKSZ \
+       || echo "Untouched sections of 2-3 do not match"
+
+# success, all done
+status=0
+exit
diff --git a/tests/generic/140.out b/tests/generic/140.out
new file mode 100644
index 0000000..51a5b85
--- /dev/null
+++ b/tests/generic/140.out
@@ -0,0 +1,19 @@
+QA output created by 140
+Create the original files
+Compare files
+60ebe700450b6015c17fa15cacb9493b  TEST_DIR/test-140/file1
+60ebe700450b6015c17fa15cacb9493b  TEST_DIR/test-140/file2
+60ebe700450b6015c17fa15cacb9493b  TEST_DIR/test-140/file3
+mmap CoW the second file
+Compare files
+60ebe700450b6015c17fa15cacb9493b  TEST_DIR/test-140/file1
+795ecfd281dbda4916431376228e4187  TEST_DIR/test-140/file2
+795ecfd281dbda4916431376228e4187  TEST_DIR/test-140/file3
+Files 1-2 do not match (intentional)
+Files 1-3 do not match (intentional)
+Compare the CoW'd section to the before file
+Start sections do not match (intentional)
+Middle sections do not match (intentional)
+End sections do not match (intentional)
+Compare the CoW'd section to the after file
+Compare the not CoW'd sections
diff --git a/tests/generic/142 b/tests/generic/142
new file mode 100755
index 0000000..cf6d634
--- /dev/null
+++ b/tests/generic/142
@@ -0,0 +1,91 @@
+#! /bin/bash
+# FS QA Test No. 142
+#
+# Ensure that reflinking a file N times and CoWing the copies leaves the
+# original intact.
+#   - Create a file and record its hash
+#   - Create some reflink copies
+#   - Rewrite all the reflink copies
+#   - Compare the contents of the original file
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2015, Oracle and/or its affiliates.  All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc.,  51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+#-----------------------------------------------------------------------
+
+seq=`basename "$0"`
+seqres="$RESULT_DIR/$seq"
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1    # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+    cd /
+    rm -rf "$tmp".* "$TESTDIR"
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+. ./common/reflink
+
+# real QA test starts here
+_supported_os Linux
+_require_test_reflink
+_require_cp_reflink
+
+rm -f "$seqres.full"
+
+TESTDIR="$TEST_DIR/test-$seq"
+rm -rf "$TESTDIR"
+mkdir "$TESTDIR"
+
+echo "Create the original file blocks"
+BLKSZ=65536
+NR=9
+_pwrite_byte 0x61 0 $((BLKSZ * 256)) "$TESTDIR/file1" >> "$seqres.full"
+_test_remount
+
+md5sum "$TESTDIR/file1" | _filter_test_dir
+csum="$(_md5_checksum "$TESTDIR/file1")"
+
+echo "Create the reflink copies"
+seq 2 $NR | while read i; do
+	_cp_reflink "$TESTDIR/file1" "$TESTDIR/file$i"
+done
+_test_remount
+
+echo "Rewrite the copies"
+seq 2 $NR | while read i; do
+	_pwrite_byte 0x62 0 $((BLKSZ * 256)) "$TESTDIR/file$i" >> "$seqres.full"
+done
+_test_remount
+
+echo "Examine original file"
+md5sum "$TESTDIR/file1" | _filter_test_dir
+md5sum "$TESTDIR/file2" | _filter_test_dir
+
+mod_csum="$(_md5_checksum "$TESTDIR/file2")"
+new_csum="$(_md5_checksum "$TESTDIR/file1")"
+test "${csum}" != "${mod_csum}" || echo "checksums do not match"
+test "${csum}" = "${new_csum}" || echo "checksums do not match"
+
+# success, all done
+status=0
+exit
diff --git a/tests/generic/142.out b/tests/generic/142.out
new file mode 100644
index 0000000..b55d0f0
--- /dev/null
+++ b/tests/generic/142.out
@@ -0,0 +1,8 @@
+QA output created by 142
+Create the original file blocks
+f4820540fc0ac02750739896fe028d56  TEST_DIR/test-142/file1
+Create the reflink copies
+Rewrite the copies
+Examine original file
+f4820540fc0ac02750739896fe028d56  TEST_DIR/test-142/file1
+eb34153e9ed1e774db28cbbe4090a449  TEST_DIR/test-142/file2
diff --git a/tests/generic/143 b/tests/generic/143
new file mode 100755
index 0000000..d2ccb94
--- /dev/null
+++ b/tests/generic/143
@@ -0,0 +1,91 @@
+#! /bin/bash
+# FS QA Test No. 143
+#
+# Ensure that reflinking a file N times and DIO CoWing the copies leaves the
+# original intact.
+#   - Create a file and record its hash
+#   - Create some reflink copies
+#   - Rewrite all the reflink copies w/ directio
+#   - Compare the contents of the original file
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2015, Oracle and/or its affiliates.  All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc.,  51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+#-----------------------------------------------------------------------
+
+seq=`basename "$0"`
+seqres="$RESULT_DIR/$seq"
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1    # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+    cd /
+    rm -rf "$tmp".* "$TESTDIR"
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+. ./common/reflink
+
+# real QA test starts here
+_supported_os Linux
+_require_test_reflink
+_require_cp_reflink
+
+rm -f "$seqres.full"
+
+TESTDIR="$TEST_DIR/test-$seq"
+rm -rf "$TESTDIR"
+mkdir "$TESTDIR"
+
+echo "Create the original file blocks"
+BLKSZ=65536
+NR=9
+_pwrite_byte 0x61 0 $((BLKSZ * 256)) "$TESTDIR/file1" >> "$seqres.full"
+_test_remount
+
+md5sum "$TESTDIR/file1" | _filter_test_dir
+csum="$(_md5_checksum "$TESTDIR/file1")"
+
+echo "Create the reflink copies"
+seq 2 $NR | while read i; do
+	_cp_reflink "$TESTDIR/file1" "$TESTDIR/file$i"
+done
+_test_remount
+
+echo "Rewrite the copies"
+seq 2 $NR | while read i; do
+	_pwrite_byte 0x62 0 $((BLKSZ * 256)) "$TESTDIR/file$i" -d >> "$seqres.full"
+done
+_test_remount
+
+echo "Examine original file"
+md5sum "$TESTDIR/file1" | _filter_test_dir
+md5sum "$TESTDIR/file2" | _filter_test_dir
+
+mod_csum="$(_md5_checksum "$TESTDIR/file2")"
+new_csum="$(_md5_checksum "$TESTDIR/file1")"
+test "${csum}" != "${mod_csum}" || echo "checksums do not match"
+test "${csum}" = "${new_csum}" || echo "checksums do not match"
+
+# success, all done
+status=0
+exit
diff --git a/tests/generic/143.out b/tests/generic/143.out
new file mode 100644
index 0000000..70a1e71
--- /dev/null
+++ b/tests/generic/143.out
@@ -0,0 +1,8 @@
+QA output created by 143
+Create the original file blocks
+f4820540fc0ac02750739896fe028d56  TEST_DIR/test-143/file1
+Create the reflink copies
+Rewrite the copies
+Examine original file
+f4820540fc0ac02750739896fe028d56  TEST_DIR/test-143/file1
+eb34153e9ed1e774db28cbbe4090a449  TEST_DIR/test-143/file2
diff --git a/tests/generic/group b/tests/generic/group
index 50cc132..7b55707 100644
--- a/tests/generic/group
+++ b/tests/generic/group
@@ -140,7 +140,12 @@
 135 metadata auto quick
 136 auto quick clone
 137 auto quick clone
+138 auto quick clone
+139 auto quick clone
+140 auto quick clone
 141 rw auto quick
+142 auto quick clone
+143 auto quick clone
 169 rw metadata auto quick
 184 metadata auto quick
 192 atime auto

_______________________________________________
xfs mailing list
xfs@xxxxxxxxxxx
http://oss.sgi.com/mailman/listinfo/xfs



[Index of Archives]     [Linux XFS Devel]     [Linux Filesystem Development]     [Filesystem Testing]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux