On Fri, Oct 30, 2015 at 12:39:38PM -0600, Ross Zwisler wrote: > On Fri, Oct 30, 2015 at 02:55:33PM +1100, Dave Chinner wrote: > > On Thu, Oct 29, 2015 at 02:12:04PM -0600, Ross Zwisler wrote: > > > This patch series adds support for fsync/msync to DAX. > > > > > > Patches 1 through 8 add various utilities that the DAX code will eventually > > > need, and the DAX code itself is added by patch 9. Patches 10 and 11 are > > > filesystem changes that are needed after the DAX code is added, but these > > > patches may change slightly as the filesystem fault handling for DAX is > > > being modified ([1] and [2]). > > > > > > I've marked this series as RFC because I'm still testing, but I wanted to > > > get this out there so people would see the direction I was going and > > > hopefully comment on any big red flags sooner rather than later. > > > > > > I realize that we are getting pretty dang close to the v4.4 merge window, > > > but I think that if we can get this reviewed and working it's a much better > > > solution than the "big hammer" approach that blindly flushes entire PMEM > > > namespaces [3]. > > > > We need the "big hammer" regardless of fsync. If REQ_FLUSH and > > REQ_FUA don't do the right thing when it comes to ordering journal > > writes against other IO operations, then the filesystems are not > > crash safe. i.e. we need REQ_FLUSH/REQ_FUA to commit all outstanding > > changes back to stable storage, just like they do for existing > > storage.... > > I think that what I've got here (when it's fully working) will protect all the > cases that we need. > > AFAIK there are three ways that data can be written to a PMEM namespace: > > 1) Through the PMEM driver via either pmem_make_request(), pmem_rw_page() or > pmem_rw_bytes(). All of these paths sync the newly written data durably to > media before the I/O completes so they shouldn't have any reliance on > REQ_FUA/REQ_FLUSH. I suspect that not all future pmem devices will use this driver/interface/semantics. Further, REQ_FLUSH/REQ_FUA are more than just "put the data on stable storage" commands. They are also IO barriers that affect scheduling of IOs in progress and in the request queues. A REQ_FLUSH/REQ_FUA IO cannot be dispatched before all prior IO has been dispatched and drained from the request queue, and IO submitted after a queued REQ_FLUSH/REQ_FUA cannot be scheduled ahead of the queued REQ_FLUSH/REQ_FUA operation. IOWs, REQ_FUA/REQ_FLUSH not only guarantee data is on stable storage, they also guarantee the order of IO dispatch and completion when concurrent IO is in progress. > 2) Through the DAX I/O path, dax_io(). As with PMEM we flush the newly > written data durably to media before the I/O operation completes, so this path > shouldn't have any reliance on REQ_FUA/REQ_FLUSH. That's fine, but that's not the problem we need solved ;) > 3) Through mmaps set up by DAX. This is the path we are trying to protect > with the dirty page tracking and flushing in this patch set, and I think that > this is the only path that has reliance on REQ_FLUSH. Quite possibly this is the case for the current intel pmem driver, but I don't look at the functionality from that perspective. Dirty page tracking is needed to enable "data writeback", whether it be CPU cachelines via pcommit() or dirty pages via submit_bio(). How the pages get dirty is irrelevant - the fact is they are dirty and we need to do /something/ to ensure they are correctly written back to the storage layer. REQ_FLUSH is needed to guarantee all data that has been written back to the storage layer is persistent in that layer. How a /driver/ manages that is up to the driver - the actual implementation is irrelevant to the higher layers. i.e. what we are concerned about at the filesystem level is that: a) "data writeback" is started correctly; b) the "data writeback" is completed; and c) volatile caches are completely flushed before we write the metadata changes that reference that data to the journal via FUA e.g. we could have pmem, but we are using buffered IO (i.e. non-DAX) and a hardware driver that doesn't flush CPU cachelines in the physical IO path. This requires that driver to flush CPU cachelines and place memory barriers in REQ_FLUSH operations, as well as after writing the data in REQ_FUA operations. Yes, this is different to the way the intel pmem drivers work (i.e. as noted in 1) above), but it is /not wrong/ as long as REQ_FLUSH/REQ_FUA also flush dirty cpu cachelines. IOWs, the high level code we write that implements fsync for DAX needs to be generic enough so that when something slightly different comes along we don't have to throw everything away and start again. I think your code will end up being generic enough to handle this, but let's make sure we don't implement something that can only work with pmem hardware/drivers that do all IO as fully synchronous to the stable domain... Cheers, Dave. -- Dave Chinner david@xxxxxxxxxxxxx _______________________________________________ xfs mailing list xfs@xxxxxxxxxxx http://oss.sgi.com/mailman/listinfo/xfs
