Re: [RFC PATCH] block: xfs: dm thin: train XFS to give up on retrying IO if thinp is out of space

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Jul 21, 2015 at 09:40:29PM -0400, Mike Snitzer wrote:
> On Tue, Jul 21 2015 at  9:00pm -0400,
> Dave Chinner <david@xxxxxxxxxxxxx> wrote:
> 
> > On Wed, Jul 22, 2015 at 10:09:23AM +1000, Dave Chinner wrote:
> > > On Tue, Jul 21, 2015 at 01:47:53PM -0400, Mike Snitzer wrote:
> > > > On Tue, Jul 21 2015 at 11:34am -0400, Eric Sandeen <sandeen@xxxxxxxxxx> wrote:
> > > > > On 7/20/15 5:36 PM, Dave Chinner wrote:
> > > > > The issue we had discussed previously is that there is no agreement
> > > > > across block devices about whether ENOSPC is a permanent or temporary
> > > > > condition.  Asking the admin to tune  the fs to each block device's
> > > > > behavior sucks, IMHO.
> > > > 
> > > > It does suck, but it beats the alternative of XFS continuing to do
> > > > nothing about the problem.
> > > 
> > > Just a comment on that: doing nothing is better than doing the wrong
> > > thing and being stuck with it forever. :)
> > > 
> > > > Disucssing more with Vivek, might be that XFS would be best served to
> > > > model what dm-thinp has provided with its 'no_space_timeout'.  It
> > > > defaults to queueing IO for 60 seconds, once the timeout expires the
> > > > queued IOs getted errored.  If set to 0 dm-thinp will queue IO
> > > > indefinitely.
> > > 
> > > Yes, that's exactly what I proposed in the thread I referenced in
> > > my previous email, and what got stuck on the bikeshed wall because
> > > of these concerns about knob twiddling:
> > > 
> > > http://oss.sgi.com/archives/xfs/2015-02/msg00346.html
> > > 
> > > | e.g. if we need configurable error handling, it needs to be
> > > | configurable for different error types, and it needs to be
> > > | configurable on a per-mount basis. And it needs to be configurable
> > > | at runtime, not just at mount time. That kind of leads to using
> > > | sysfs for this. e.g. for each error type we ned to handle different
> > > | behaviour for:
> > > | 
> > > | $ cat /sys/fs/xfs/vda/meta_write_errors/enospc/type
> > > | [transient] permanent
> > > | $ cat /sys/fs/xfs/vda/meta_write_errors/enospc/perm_timeout_seconds
> > > | 300
> > > | $ cat
> > > | /sys/fs/xfs/vda/meta_write_errors/enospc/perm_max_retry_attempts
> > > | 50
> > > | $ cat
> > > | /sys/fs/xfs/vda/meta_write_errors/enospc/transient_fail_at_umount
> > > | 1
> > > 
> > > I've rebased this patchset, and I'm cleaning it up now, so in a few
> > > days I'll have something for review, likely for the 4.3 merge
> > > window....
> > 
> > Just thinking a bit more on how to make this simpler to configure,
> > is there a simple way for the filesystem to determine the current
> > config of the dm thinp volume? i.e. if the dm-thinp volume is
> > configured to error out immediately on enospc, then XFS should
> > default to doing the same thing. having XFS be able to grab this
> > status at mount time and change the default ENOSPC error config from
> > transient to permanent on such dm-thinp volumes would go a long way
> > to making these configs Just Do The Right Thing on block dev enospc
> > errors...
> > 
> > e.g. if dm-thinp is configured to queue for 60s and then fail on
> > ENOSPC, we want XFS to fail immediately on ENOSPC in metadata IO. If
> > dm-thinp is configured to ENOSPC instantly (i.e. no queueing) then
> > we want XFS to retry and use it's default retry maximums before
> > failing permanently.
> 
> Yes, that'd be nice.  But there isn't a way to easily get the DM thinp
> device's config from within the kernel (unless XFS wants to get into the
> business of issuing ioctls to DM devices.. unlikely). 

Not really.

> I could be
> persuaded to expose a per-device sysfs file to get the status (would
> avoid need for ioctl), e.g.:
>  # cat /sys/block/dm-5/dm/status
> (but that doesn't _really_ help in-kernel access, awkward for filesystem
> code to be opening sysfs files!)

No, not going that way.  We have direct access through the bdev we
opened, so that's the communications channel we'd need to use.

> SO userspace (mkfs.xfs) could easily check the thinp device's setup
> using 'dmsetup status <device>' (output will either contain
> 'queue_if_no_space' or 'error_if_no_space').  The DM thinp
> 'no_space_timeout' (applicable if queue_if_no_space) is a thinp global
> accessed using a module param:
>  # cat /sys/module/dm_thin_pool/parameters/no_space_timeout
>  60

Mkfs is not the right interface - users can change dm-thinp
behaviour long after the filesystem was created and so the XFS
config needs to be configurable, too. Further, I really don't want
to have to add anything to the on-disk format to support error
configuration because, well, that drives the level of complexity up
a couple or orders of magnitude (mkfs, repair, metadump, db, etc all
need to support it), especially when it can be driven easily from
userspace after mount with far less constraints and support burden.

> I'm open to considering alternative interfaces for getting you the info
> you need.  I just don't have a great sense for what mechanism you'd like
> to use.  Do we invent a new block device operations table method that
> sets values in a 'struct no_space_strategy' passed in to the
> blockdevice?

It's long been frowned on having the filesystems dig into block
device structures. We have lots of wrapper functions for getting
information from or performing operations on block devices. (e.g.
bdev_read_only(), bdev_get_queue(), blkdev_issue_flush(),
blkdev_issue_zeroout(), etc) and so I think this is the pattern we'd
need to follow. If we do that - bdev_get_nospace_strategy() - then
how that information gets to the filesystem is completely opaque
at the fs level, and the block layer can implement it in whatever
way is considered sane...

And, realistically, all we really need returned is a enum to tell us
how the bdev behaves on enospc:
	- bdev fails fast, (i.e. immediate ENOSPC)
	- bdev fails slow, (i.e. queue for some time, then ENOSPC)
	- bdev never fails (i.e. queue forever)
	- bdev doesn't support this (i.e. EOPNOTSUPP)

Cheers,

Dave.
-- 
Dave Chinner
david@xxxxxxxxxxxxx

_______________________________________________
xfs mailing list
xfs@xxxxxxxxxxx
http://oss.sgi.com/mailman/listinfo/xfs



[Index of Archives]     [Linux XFS Devel]     [Linux Filesystem Development]     [Filesystem Testing]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux