On Thu, Jul 16, 2015 at 11:03:09AM -0500, Eric Sandeen wrote:
> Tests xfs_db's ability to change & restore UUIDs on V5 filesystems,
> and tests xfs_copy's ability to change the UUID on the copy.
>
> Update to _filter_uuid is so that it will catch the UUID output
> from xfs_admin -u, which is slightly different than the regexp it
> was expecting.
>
> This requires new userspace which knows how to change the UUID on
> a V5 superblock.
>
> Signed-off-by: Eric Sandeen <sandeen@xxxxxxxxxx>
> ---
>
> V6: Take into account Brian's prior review.
>
> diff --git a/common/filter b/common/filter
> index 05dbae6..8db1b3e 100644
> --- a/common/filter
> +++ b/common/filter
> @@ -275,9 +275,9 @@ _filter_uuid()
> {
> if [ ! -z $1 ]; then
> UUID=$1
> - sed -e "s/\(uuid:\) $UUID/\1 <EXACTUUID>/i"
> + sed -e "s/\(uuid[ :=]\+\) $UUID/\1 <EXACTUUID>/i"
> else
> - sed -e "s/\(uuid:\) *[0-9a-f-][0-9a-f-]*/\1 <UUID>/i"
> + sed -e "s/\(uuid[ :=]\+\) *[0-9a-f-][0-9a-f-]*/\1 <UUID>/ig"
> fi
> }
>
> diff --git a/common/rc b/common/rc
> index 610045e..00b529b 100644
> --- a/common/rc
> +++ b/common/rc
> @@ -2702,6 +2702,21 @@ _require_test_fcntl_advisory_locks()
> _notrun "Require fcntl advisory locks support"
> }
>
> +# XFS ability to change UUIDs on V5/CRC filesystems
> +#
> +_require_meta_uuid()
> +{
> + # This will create a crc fs on $SCRATCH_DEV
> + _require_xfs_crc
> +
> + $XFS_DB_PROG -x -c "uuid generate" $SCRATCH_DEV >/dev/null 2>&1 \
> + || _notrun "Userspace doesn't support meta_uuid feature"
> +
> + _scratch_mount >/dev/null 2>&1 \
> + || _notrun "Kernel doesn't support meta_uuid feature"
> + umount $SCRATCH_MNT
> +}
> +
> _get_total_inode()
> {
> if [ -z "$1" ]; then
> diff --git a/tests/xfs/074 b/tests/xfs/074
> new file mode 100755
> index 0000000..2592e89
> --- /dev/null
> +++ b/tests/xfs/074
> @@ -0,0 +1,143 @@
> +#! /bin/bash
> +# FS QA Test 074
> +#
> +# test UUID modification of CRC-enabled filesystems
> +#
> +# CRC-enabled / V5 superblock filesystems have a UUID stamped into
> +# every piece of metadata, and a mechanism was added later to allow
> +# changing the user-visible UUID by copying the original UUID (which
> +# matches all the existing metadata) to a new superblock location.
> +# Exercise some of that behavior.
> +#
> +#-----------------------------------------------------------------------
> +# Copyright (c) 2015 Red Hat, Inc. All Rights Reserved.
> +#
> +# This program is free software; you can redistribute it and/or
> +# modify it under the terms of the GNU General Public License as
> +# published by the Free Software Foundation.
> +#
> +# This program is distributed in the hope that it would be useful,
> +# but WITHOUT ANY WARRANTY; without even the implied warranty of
> +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> +# GNU General Public License for more details.
> +#
> +# You should have received a copy of the GNU General Public License
> +# along with this program; if not, write the Free Software Foundation,
> +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
> +#-----------------------------------------------------------------------
> +#
> +
> +seq=`basename $0`
> +seqres=$RESULT_DIR/$seq
> +echo "QA output created by $seq"
> +
> +here=`pwd`
> +tmp=/tmp/$$
> +status=1 # failure is the default!
> +trap "_cleanup; exit \$status" 0 1 2 3 15
> +
> +_cleanup()
> +{
> + cd /
> + rm -f $tmp.*
> +}
> +
> +# get standard environment, filters and checks
> +. ./common/rc
> +. ./common/filter
> +
> +# real QA test starts here
> +
> +_supported_fs xfs
> +_supported_os Linux
> +_require_scratch
> +_require_xfs_crc
> +_require_meta_uuid
> +
> +# Takes 2 args, 2nd optional:
> +# 1: generate, rewrite, or restore
> +# 2: Expected UUID after the action. Blank if new uuid generated
> +# After the action check the fs, and make sure it can be mounted
> +# Sets NEW_UUID to the resulting UUID.
> +_test_uuid()
> +{
> + ACTION=$1
> + EXPECTED_UUID=$2
> +
> + $XFS_DB_PROG -x -c "uuid $ACTION" $SCRATCH_DEV \
> + | _filter_uuid $EXPECTED_UUID
> + NEW_UUID=`$XFS_DB_PROG -c "uuid" $SCRATCH_DEV | awk '{print $NF}'`
> + _check_scratch_fs
> + _scratch_mount || _fail "Mount failed after UUID $ACTION"
> + _scratch_unmount
> +
> +}
> +
> +_fs_has_META_UUID()
> +{
> + FS=$1
> + $XFS_DB_PROG -r -c version $FS | grep -q META_UUID
> +}
> +
> +rm -f $seqres.full
> +
> +_scratch_mkfs_xfs -m crc=1 >> $seqres.full 2>&1 || _fail "mkfs failed"
> +
> +ORIG_UUID=`$XFS_DB_PROG -c "uuid" $SCRATCH_DEV | awk '{print $NF}'`
> +
> +_scratch_mount
> +# Put some stuff on the fs
> +$FSSTRESS_PROG -d $SCRATCH_MNT -n 100 -p 4 >> $seqres.full 2>&1
> +_scratch_unmount
> +
> +# Can xfs_db change it?
> +
> +echo "== Generate new UUID"
> +_test_uuid generate
> +[ "$NEW_UUID" == "$ORIG_UUID" ] && _fail "Failed to change UUID"
> +_fs_has_META_UUID $SCRATCH_DEV || _fail "META_UUID feature not set"
> +
FWIW, another cleanup here might be to add a "has_meta_uuid" param to
_test_uuid that provides the expected _fs_has_META_UUID value following
the operation. That would condense some of the repeated error
messages. Otherwise this seems Ok to me:
Reviewed-by: Brian Foster <bfoster@xxxxxxxxxx>
> +# This should be a no-op
> +echo "== Rewrite UUID"
> +_test_uuid rewrite $NEW_UUID
> +_fs_has_META_UUID $SCRATCH_DEV || _fail "META_UUID feature not set"
> +
> +# Can we change it back?
> +echo "== Restore old UUID"
> +_test_uuid restore $ORIG_UUID
> +[ "$NEW_UUID" != "$ORIG_UUID" ] && _fail "Failed to restore UUID"
> +_fs_has_META_UUID $SCRATCH_DEV && _fail "META_UUID feature should not be not set"
> +
> +# This should be a no-op too.
> +echo "== Rewrite UUID"
> +_test_uuid rewrite $ORIG_UUID
> +_fs_has_META_UUID $SCRATCH_DEV && _fail "META_UUID feature should not be not set"
> +
> +# Ok, now what does xfs_copy do; it changes UUID by default
> +
> +IMGFILE=$TEST_DIR/$seq.copy.img
> +rm -f $IMGFILE
> +
> +# xfs_copy changes the UUID by default
> +echo "== xfs_copy with new UUID"
> +$XFS_COPY_PROG $SCRATCH_DEV $IMGFILE 2>&1 >> $seqres.full || \
> + _fail "xfs_copy (new UUID) failed"
> +_check_xfs_filesystem $IMGFILE none none || _fail "Copy looks corrupted"
> +# The copy should have META_UUID feature set
> +_fs_has_META_UUID $IMGFILE || _fail "META_UUID feature not set on copy"
> +_scratch_mount || _fail "Mount failed after UUID rewrite"
> +_scratch_unmount
> +
> +rm -f $IMGFILE
> +
> +# duplicating the UUID should be fine too
> +echo "== xfs_copy with duplicate UUID"
> +$XFS_COPY_PROG -d $SCRATCH_DEV $IMGFILE 2>&1 >> $seqres.full || \
> + _fail "xfs_copy (duplicate) failed"
> +_check_xfs_filesystem $IMGFILE none none || _fail "Duplicate copy looks corrupted"
> +# The copy should not have META_UUID feature set
> +_fs_has_META_UUID $IMGFILE && _fail "META_UUID feature should not be set on copy"
> +
> +# success, all done
> +status=0
> +exit
> diff --git a/tests/xfs/074.out b/tests/xfs/074.out
> new file mode 100644
> index 0000000..b511107
> --- /dev/null
> +++ b/tests/xfs/074.out
> @@ -0,0 +1,21 @@
> +QA output created by 074
> +== Generate new UUID
> +Clearing log and setting UUID
> +writing all SBs
> +new UUID = <UUID>
> +== Rewrite UUID
> +old UUID = <EXACTUUID>
> +Clearing log and setting UUID
> +writing all SBs
> +new UUID = <EXACTUUID>
> +== Restore old UUID
> +Clearing log and setting UUID
> +writing all SBs
> +new UUID = <EXACTUUID>
> +== Rewrite UUID
> +old UUID = <EXACTUUID>
> +Clearing log and setting UUID
> +writing all SBs
> +new UUID = <EXACTUUID>
> +== xfs_copy with new UUID
> +== xfs_copy with duplicate UUID
> diff --git a/tests/xfs/group b/tests/xfs/group
> index 848a1bd..a66869a 100644
> --- a/tests/xfs/group
> +++ b/tests/xfs/group
> @@ -71,6 +71,7 @@
> 071 rw auto
> 072 rw auto prealloc quick
> 073 copy auto
> +074 auto quick copy
> 078 growfs auto quick
> 080 rw ioctl
> 081 deprecated # log logprint quota
>
> _______________________________________________
> xfs mailing list
> xfs@xxxxxxxxxxx
> http://oss.sgi.com/mailman/listinfo/xfs
_______________________________________________
xfs mailing list
xfs@xxxxxxxxxxx
http://oss.sgi.com/mailman/listinfo/xfs
