On Fri, Jul 03, 2015 at 09:05:20AM +1000, Dave Chinner wrote:
> On Thu, Jul 02, 2015 at 10:14:04AM -0400, Brian Foster wrote:
> > On Thu, Jul 02, 2015 at 08:47:53AM -0400, Jan Tulak wrote:
>
> [snip ~250 lines]
>
> [ add note about mailing list etiquette w.r.t. trimming the quoted
> context to just what is being discussed so that readers don't have to
> scroll through several screens of irrelevant text just to find the
> discussion. ]
>
> > If you're still not convinced, create an exact sized 512GB file, mkfs it
> > (with the su/sw options set for multidisk) with and without this change
> > and observe agcount. :)
>
> At one point during development of this patch set I started writing
> an xfstest to validate that mkfs did all the right input validation
> things and set parameters appropriately so that we didn't
> inadvertently change behaviour. I never really finished it off (like
> the patch set), but I've attached it below to give an idea of where
> I was going with it. It was based on validating the input and CLI
> parameters for the new code, so is guaranteed to fail on an existing
> mkfs binary.
>
> It's probably a good idea to also validate that things like agcount
> scale as we expect them to...
>
Yeah, good idea. This is probably something we should get in following
this series. I shouldn't be too hard to teach this to expect certain
format values (agcount, agsize, etc.). We might be able to get away with
just matching the mkfs output to expected output on fixed size
filesystems.
Brian
> Cheers,
>
> Dave.
> --
> Dave Chinner
> david@xxxxxxxxxxxxx
>
>
> xfs: add new xfs.mkfs input validation test
>
> From: Dave Chinner <dchinner@xxxxxxxxxx>
>
> mkfs.xfs does not do a very good job of input validation. This test
> is designed to exercise the input validation and test good/bad
> combinations of options being set. It will not pass on a current
> mkfs.xfs binary - it is designed to be the test case for a input
> validation cleanup.
>
> Signed-off-by: Dave Chinner <dchinner@xxxxxxxxxx>
> ---
> tests/xfs/401 | 194 ++++++++++++++++++++++++++++++++++++++++++++++++++++++
> tests/xfs/401.out | 2 +
> tests/xfs/group | 1 +
> 3 files changed, 197 insertions(+)
>
> diff --git a/tests/xfs/401 b/tests/xfs/401
> new file mode 100644
> index 0000000..48de395
> --- /dev/null
> +++ b/tests/xfs/401
> @@ -0,0 +1,194 @@
> +#! /bin/bash
> +# FS QA Test No. xfs/401
> +#
> +# mkfs.xfs input validation test. Designed to break mkfs.xfs if it doesn't
> +# filter garbage input or invalid option combinations correctly.
> +#
> +#-----------------------------------------------------------------------
> +# Copyright (c) 2014 Red Hat, Inc. All Rights Reserved.
> +#
> +# This program is free software; you can redistribute it and/or
> +# modify it under the terms of the GNU General Public License as
> +# published by the Free Software Foundation.
> +#
> +# This program is distributed in the hope that it would be useful,
> +# but WITHOUT ANY WARRANTY; without even the implied warranty of
> +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> +# GNU General Public License for more details.
> +#
> +# You should have received a copy of the GNU General Public License
> +# along with this program; if not, write the Free Software Foundation,
> +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
> +#-----------------------------------------------------------------------
> +#
> +
> +seq=`basename $0`
> +seqres=$RESULT_DIR/$seq
> +echo "QA output created by $res"
> +
> +here=`pwd`
> +tmp=/tmp/$$
> +status=1 # failure is the default!
> +trap "_cleanup; exit $status" 0 1 2 3 15
> +
> +_cleanup()
> +{
> + cd /
> + rm -f $tmp.*
> +}
> +
> +# get standard environment, filters and checks
> +. ./common/rc
> +. ./common/filter
> +
> +# real QA test starts here
> +
> +# Modify as appropriate.
> +_supported_fs xfs
> +_supported_os Linux
> +_require_scratch
> +
> +echo silence is golden
> +
> +# clear out any options to mkfs first. We want to test realtime and external log
> +# devices if we can, but we also want to control them ourselves.
> +logdev=$SCRATCH_LOGDEV
> +rtdev=$SCRATCH_RTDEV
> +
> +MKFS_OPTIONS=
> +SCRATCH_LOGDEV=
> +SCRATCH_RTDEV=
> +
> +# limit the image size of the filesystem being created to something small
> +fssize=$((4 * 1024 * 1024 * 1024))
> +fsimg=$TEST_DIR/$seq.img
> +
> +do_mkfs_pass()
> +{
> + echo >> $seqres.full
> + echo "pass expected $*" >> $seqres.full
> + $MKFS_XFS_PROG -f -N $* >> $seqres.full 2>&1
> + [ $? -ne 0 ] && echo "fail $*"
> +}
> +
> +do_mkfs_fail()
> +{
> + echo >> $seqres.full
> + echo "fail expected $*" >> $seqres.full
> + $MKFS_XFS_PROG -f -N $* >> $seqres.full 2>&1
> + [ $? -eq 0 ] && echo "pass $*"
> +}
> +
> +do_mkfs_pass $SCRATCH_DEV
> +
> +# basic "should fail" options
> +# logarithm based options are no longer valid
> +do_mkfs_fail -s log=9 $SCRATCH_DEV
> +do_mkfs_fail -b log=9 $SCRATCH_DEV
> +do_mkfs_fail -n log=9 $SCRATCH_DEV
> +do_mkfs_fail -i log=9 $SCRATCH_DEV
> +do_mkfs_fail -d sectlog=9 $SCRATCH_DEV
> +do_mkfs_fail -l sectlog=9 $SCRATCH_DEV
> +
> +# specifying sector sizes in sectors or blocks or garbage
> +do_mkfs_fail -s size=2s $SCRATCH_DEV
> +do_mkfs_fail -d sectsize=2s $SCRATCH_DEV
> +do_mkfs_fail -l sectsize=2s $SCRATCH_DEV
> +do_mkfs_fail -s size=2b $SCRATCH_DEV
> +do_mkfs_fail -d sectsize=2b $SCRATCH_DEV
> +do_mkfs_fail -l sectsize=2b $SCRATCH_DEV
> +
> +do_mkfs_fail -s size=grot $SCRATCH_DEV
> +do_mkfs_fail -s size=2yerk $SCRATCH_DEV
> +do_mkfs_fail -d sectsize=blah $SCRATCH_DEV
> +do_mkfs_fail -d sectsize=2foo $SCRATCH_DEV
> +do_mkfs_fail -l sectsize=nggh $SCRATCH_DEV
> +do_mkfs_fail -l sectsize=2nggh $SCRATCH_DEV
> +
> +# conflicting sector/block sizes
> +do_mkfs_fail -s size=512 -d sectsize=1024 $SCRATCH_DEV
> +do_mkfs_fail -s size=512 -l sectsize=1024 $SCRATCH_DEV
> +do_mkfs_fail -d sectsize=2048 -l sectsize=1024 $SCRATCH_DEV
> +
> +do_mkfs_fail -b size=512 -s size=1024 $SCRATCH_DEV
> +do_mkfs_fail -b size=512 -d sectsize=1024 $SCRATCH_DEV
> +do_mkfs_fail -b size=512 -l sectsize=1024 $SCRATCH_DEV
> +
> +# specifying block sizes in sectors without specifying sector size
> +# or in blocks or garbage
> +do_mkfs_fail -b size=2s $SCRATCH_DEV
> +do_mkfs_fail -b size=2b $SCRATCH_DEV
> +do_mkfs_fail -b size=nfi $SCRATCH_DEV
> +do_mkfs_fail -b size=4096nfi $SCRATCH_DEV
> +do_mkfs_fail -n size=2s $SCRATCH_DEV
> +do_mkfs_fail -n size=2b $SCRATCH_DEV
> +do_mkfs_fail -n size=nfi $SCRATCH_DEV
> +do_mkfs_fail -n size=4096nfi $SCRATCH_DEV
> +
> +# bad label length
> +do_mkfs_fail -L thisiswaytoolong $SCRATCH_DEV
> +
> +# basic "should pass" data section tests
> +do_mkfs_pass $SCRATCH_DEV
> +do_mkfs_pass -d name=$SCRATCH_DEV
> +do_mkfs_pass -d size=$fssize $SCRATCH_DEV
> +do_mkfs_pass -d agcount=32 $SCRATCH_DEV
> +do_mkfs_pass -d agsize=32m $SCRATCH_DEV
> +do_mkfs_pass -d agsize=32M $SCRATCH_DEV
> +do_mkfs_pass -d agsize=1g $SCRATCH_DEV
> +do_mkfs_pass -d agsize=$((32 * 1024 * 1024)) $SCRATCH_DEV
> +do_mkfs_pass -b size=4096 -d agsize=8192b $SCRATCH_DEV
> +do_mkfs_pass -d sectsize=512,agsize=65536s $SCRATCH_DEV
> +do_mkfs_pass -s size=512 -d agsize=65536s $SCRATCH_DEV
> +do_mkfs_pass -d noalign $SCRATCH_DEV
> +do_mkfs_pass -d sunit=0,swidth=0 $SCRATCH_DEV
> +do_mkfs_pass -d sunit=8,swidth=8 $SCRATCH_DEV
> +do_mkfs_pass -d sunit=8,swidth=64 $SCRATCH_DEV
> +do_mkfs_pass -d su=0,sw=0 $SCRATCH_DEV
> +do_mkfs_pass -d su=4096,sw=1 $SCRATCH_DEV
> +do_mkfs_pass -d su=4k,sw=1 $SCRATCH_DEV
> +do_mkfs_pass -d su=4K,sw=8 $SCRATCH_DEV
> +do_mkfs_pass -b size=4096 -d su=1b,sw=8 $SCRATCH_DEV
> +do_mkfs_pass -d sectsize=512,su=8s,sw=8 $SCRATCH_DEV
> +do_mkfs_pass -s size=512 -d su=8s,sw=8 $SCRATCH_DEV
> +
> +rm -f $fsimg
> +$XFS_IO_PROG -f -c "truncate $fssize" $fsimg
> +do_mkfs_pass -d file $fsimg
> +do_mkfs_pass -d file,name=$fsimg
> +rm -f $fsimg
> +do_mkfs_pass -d size=$fssize,file $fsimg
> +rm -f $fsimg
> +do_mkfs_pass -d size=$fssize,file,name=$fsimg
> +do_mkfs_pass -d file,name=$fsimg
> +
> +# invalid data section tests
> +do_mkfs_fail -d size=${fssize}b $SCRATCH_DEV
> +do_mkfs_fail -d size=${fssize}s $SCRATCH_DEV
> +do_mkfs_fail -d size=${fssize}yerk $SCRATCH_DEV
> +do_mkfs_fail -d agsize=8192b $SCRATCH_DEV
> +do_mkfs_fail -d agsize=65536s $SCRATCH_DEV
> +do_mkfs_fail -d agsize=32Mbsdfsdo $SCRATCH_DEV
> +do_mkfs_fail -d agsize=1GB $SCRATCH_DEV
> +do_mkfs_fail -d agcount=1k $SCRATCH_DEV
> +do_mkfs_fail -d agcount=6b $SCRATCH_DEV
> +do_mkfs_fail -d agcount=32,agsize=32m $SCRATCH_DEV
> +do_mkfs_fail -d sunit=0,swidth=64 $SCRATCH_DEV
> +do_mkfs_fail -d sunit=64,swidth=0 $SCRATCH_DEV
> +do_mkfs_fail -d sunit=64,swidth=64,noalign $SCRATCH_DEV
> +do_mkfs_fail -d sunit=64k,swidth=64 $SCRATCH_DEV
> +do_mkfs_fail -d sunit=64,swidth=64m $SCRATCH_DEV
> +do_mkfs_fail -d su=0,sw=64 $SCRATCH_DEV
> +do_mkfs_fail -d su=4096,sw=0 $SCRATCH_DEV
> +do_mkfs_fail -d su=4096,sw=64,noalign $SCRATCH_DEV
> +do_mkfs_fail -d su=4096,sw=64s $SCRATCH_DEV
> +do_mkfs_fail -d su=4096s,sw=64 $SCRATCH_DEV
> +do_mkfs_fail -d su=4096b,sw=64 $SCRATCH_DEV
> +do_mkfs_fail -d su=4096garabge,sw=64 $SCRATCH_DEV
> +do_mkfs_fail -d su=4096,sw=64,sunit=64,swidth=64 $SCRATCH_DEV
> +
> +# naming section tests
> +do_mkfs_pass -n size=65536 $SCRATCH_DEV
> +
> +status=0
> +exit
> diff --git a/tests/xfs/401.out b/tests/xfs/401.out
> new file mode 100644
> index 0000000..aaf601b
> --- /dev/null
> +++ b/tests/xfs/401.out
> @@ -0,0 +1,2 @@
> +QA output created by 401
> +silence is golden
> diff --git a/tests/xfs/group b/tests/xfs/group
> index ba34650..cfee785 100644
> --- a/tests/xfs/group
> +++ b/tests/xfs/group
> @@ -189,3 +189,4 @@
> 304 auto quick quota
> 305 auto quota
> 306 auto stress log metadata repair
> +401 mkfs auto quick
_______________________________________________
xfs mailing list
xfs@xxxxxxxxxxx
http://oss.sgi.com/mailman/listinfo/xfs
