On Tue, Jun 02, 2015 at 12:02:59PM -0400, Brian Foster wrote:
> On Fri, May 29, 2015 at 09:45:52AM +1000, Dave Chinner wrote:
> > From: Dave Chinner <dchinner@xxxxxxxxxx>
> >
> > Add initial support for DAX block zeroing operations to XFS. DAX
> > cannot use buffered IO through the page cache for zeroing, nor do we
> > need to issue IO for uncached block zeroing. In both cases, we can
> > simply call out to the dax block zeroing function.
> >
> > Signed-off-by: Dave Chinner <dchinner@xxxxxxxxxx>
> > ---
> > fs/xfs/xfs_bmap_util.c | 23 +++++++++++++++++++----
> > fs/xfs/xfs_file.c | 43 +++++++++++++++++++++++++------------------
> > 2 files changed, 44 insertions(+), 22 deletions(-)
> >
> ...
> > @@ -108,20 +110,25 @@ xfs_iozero(
> > if (bytes > count)
> > bytes = count;
> >
> > - status = pagecache_write_begin(NULL, mapping, pos, bytes,
> > - AOP_FLAG_UNINTERRUPTIBLE,
> > - &page, &fsdata);
> > - if (status)
> > - break;
> > + if (IS_DAX(VFS_I(ip)))
> > + dax_zero_page_range(VFS_I(ip), pos, bytes,
> > + xfs_get_blocks_direct);
>
> Still no error checking here...
Ah. missed that. Updated patch below.
Cheers,
Dave.
--
Dave Chinner
david@xxxxxxxxxxxxx
xfs: add DAX block zeroing support
From: Dave Chinner <dchinner@xxxxxxxxxx>
Add initial support for DAX block zeroing operations to XFS. DAX
cannot use buffered IO through the page cache for zeroing, nor do we
need to issue IO for uncached block zeroing. In both cases, we can
simply call out to the dax block zeroing function.
Signed-off-by: Dave Chinner <dchinner@xxxxxxxxxx>
---
fs/xfs/xfs_bmap_util.c | 23 +++++++++++++++++++----
fs/xfs/xfs_file.c | 45 +++++++++++++++++++++++++++------------------
2 files changed, 46 insertions(+), 22 deletions(-)
diff --git a/fs/xfs/xfs_bmap_util.c b/fs/xfs/xfs_bmap_util.c
index a52bbd3..4a29655 100644
--- a/fs/xfs/xfs_bmap_util.c
+++ b/fs/xfs/xfs_bmap_util.c
@@ -1133,14 +1133,29 @@ xfs_zero_remaining_bytes(
break;
ASSERT(imap.br_blockcount >= 1);
ASSERT(imap.br_startoff == offset_fsb);
+ ASSERT(imap.br_startblock != DELAYSTARTBLOCK);
+
+ if (imap.br_startblock == HOLESTARTBLOCK ||
+ imap.br_state == XFS_EXT_UNWRITTEN) {
+ /* skip the entire extent */
+ lastoffset = XFS_FSB_TO_B(mp, imap.br_startoff +
+ imap.br_blockcount) - 1;
+ continue;
+ }
+
lastoffset = XFS_FSB_TO_B(mp, imap.br_startoff + 1) - 1;
if (lastoffset > endoff)
lastoffset = endoff;
- if (imap.br_startblock == HOLESTARTBLOCK)
- continue;
- ASSERT(imap.br_startblock != DELAYSTARTBLOCK);
- if (imap.br_state == XFS_EXT_UNWRITTEN)
+
+ /* DAX can just zero the backing device directly */
+ if (IS_DAX(VFS_I(ip))) {
+ error = dax_zero_page_range(VFS_I(ip), offset,
+ lastoffset - offset + 1,
+ xfs_get_blocks_direct);
+ if (error)
+ return error;
continue;
+ }
error = xfs_buf_read_uncached(XFS_IS_REALTIME_INODE(ip) ?
mp->m_rtdev_targp : mp->m_ddev_targp,
diff --git a/fs/xfs/xfs_file.c b/fs/xfs/xfs_file.c
index c2af282..84b2421 100644
--- a/fs/xfs/xfs_file.c
+++ b/fs/xfs/xfs_file.c
@@ -79,14 +79,15 @@ xfs_rw_ilock_demote(
}
/*
- * xfs_iozero
+ * xfs_iozero clears the specified range supplied via the page cache (except in
+ * the DAX case). Writes through the page cache will allocate blocks over holes,
+ * though the callers usually map the holes first and avoid them. If a block is
+ * not completely zeroed, then it will be read from disk before being partially
+ * zeroed.
*
- * xfs_iozero clears the specified range of buffer supplied,
- * and marks all the affected blocks as valid and modified. If
- * an affected block is not allocated, it will be allocated. If
- * an affected block is not completely overwritten, and is not
- * valid before the operation, it will be read from disk before
- * being partially zeroed.
+ * In the DAX case, we can just directly write to the underlying pages. This
+ * will not allocate blocks, but will avoid holes and unwritten extents and so
+ * not do unnecessary work.
*/
int
xfs_iozero(
@@ -96,7 +97,8 @@ xfs_iozero(
{
struct page *page;
struct address_space *mapping;
- int status;
+ int status = 0;
+
mapping = VFS_I(ip)->i_mapping;
do {
@@ -108,20 +110,27 @@ xfs_iozero(
if (bytes > count)
bytes = count;
- status = pagecache_write_begin(NULL, mapping, pos, bytes,
- AOP_FLAG_UNINTERRUPTIBLE,
- &page, &fsdata);
- if (status)
- break;
+ if (IS_DAX(VFS_I(ip))) {
+ status = dax_zero_page_range(VFS_I(ip), pos, bytes,
+ xfs_get_blocks_direct);
+ if (status)
+ break;
+ } else {
+ status = pagecache_write_begin(NULL, mapping, pos, bytes,
+ AOP_FLAG_UNINTERRUPTIBLE,
+ &page, &fsdata);
+ if (status)
+ break;
- zero_user(page, offset, bytes);
+ zero_user(page, offset, bytes);
- status = pagecache_write_end(NULL, mapping, pos, bytes, bytes,
- page, fsdata);
- WARN_ON(status <= 0); /* can't return less than zero! */
+ status = pagecache_write_end(NULL, mapping, pos, bytes,
+ bytes, page, fsdata);
+ WARN_ON(status <= 0); /* can't return less than zero! */
+ status = 0;
+ }
pos += bytes;
count -= bytes;
- status = 0;
} while (count);
return status;
_______________________________________________
xfs mailing list
xfs@xxxxxxxxxxx
http://oss.sgi.com/mailman/listinfo/xfs
