On Thu, Mar 05, 2015 at 03:26:32PM -0600, Eric Sandeen wrote:
> Being able to write corrupt data is handy if we wish to test
> repair against specific types of corruptions.
>
> Add a "-c" option to the write command which allows this.
>
> Note that this also skips CRC updates; it's not currently possible
> to write invalid data with a valid CRC; CRC recalculation is
> intertwined with validation.
>
> Signed-off-by: Eric Sandeen <sandeen@xxxxxxxxxx>
> ---
>
> diff --git a/db/crc.c b/db/crc.c
> index ad46c3f..861086a 100644
> --- a/db/crc.c
> +++ b/db/crc.c
This depends on the previous crc command which isn't merged yet. It
might be worth it to include that again here so it hopefully gets picked
up.
> @@ -58,13 +58,6 @@ crc_help(void)
>
> }
>
> -void
> -xfs_dummy_verify(
> - struct xfs_buf *bp)
> -{
> - return;
> -}
> -
> static int
> crc_f(
> int argc,
> diff --git a/db/crc.h b/db/crc.h
> index 80ecec3..9f44615 100644
> --- a/db/crc.h
> +++ b/db/crc.h
> @@ -20,4 +20,3 @@ struct field;
>
> extern void crc_init(void);
> extern void crc_struct(const field_t *fields, int argc, char **argv);
> -extern void xfs_dummy_verify(struct xfs_buf *bp);
> diff --git a/db/io.c b/db/io.c
> index eb3daa1..2d18d56 100644
> --- a/db/io.c
> +++ b/db/io.c
> @@ -458,6 +458,13 @@ write_cur_bbs(void)
> }
>
> void
> +xfs_dummy_verify(
> + struct xfs_buf *bp)
> +{
> + return;
> +}
> +
> +void
> write_cur(void)
> {
> int skip_crc = (iocur_top->bp->b_ops->verify_write == xfs_dummy_verify);
> diff --git a/db/io.h b/db/io.h
> index 71082e6..31d96b4 100644
> --- a/db/io.h
> +++ b/db/io.h
> @@ -63,6 +63,7 @@ extern void set_cur(const struct typ *t, __int64_t d, int c, int ring_add,
> bbmap_t *bbmap);
> extern void ring_add(void);
> extern void set_iocur_type(const struct typ *t);
> +extern void xfs_dummy_verify(struct xfs_buf *bp);
>
> /*
> * returns -1 for unchecked, 0 for bad and 1 for good
> diff --git a/db/write.c b/db/write.c
> index a0f14f4..a01c25a 100644
> --- a/db/write.c
> +++ b/db/write.c
> @@ -38,7 +38,7 @@ static int write_f(int argc, char **argv);
> static void write_help(void);
>
> static const cmdinfo_t write_cmd =
> - { "write", NULL, write_f, 0, -1, 0, N_("[field or value]..."),
> + { "write", NULL, write_f, 0, -1, 0, N_("[-c] [field or value]..."),
> N_("write value to disk"), write_help };
>
> void
> @@ -79,6 +79,7 @@ write_help(void)
> " String mode: 'write \"This_is_a_filename\" - write null terminated string.\n"
> "\n"
> " In data mode type 'write' by itself for a list of specific commands.\n\n"
> +" Specifying the -c option will allow writes of invalid (corrupt) data.\n\n"
> ));
>
> }
> @@ -90,6 +91,9 @@ write_f(
> {
> pfunc_t pf;
> extern char *progname;
> + int c;
> + int corrupt = 0; /* Allow write of corrupt data; skip verification */
> + const struct xfs_buf_ops *stashed_ops = NULL;
Trailing space here.
>
> if (x.isreadonly & LIBXFS_ISREADONLY) {
> dbprintf(_("%s started in read only mode, writing disabled\n"),
> @@ -109,12 +113,36 @@ write_f(
> return 0;
> }
>
> - /* move past the "write" command */
> - argc--;
> - argv++;
> + if (argc) while ((c = getopt(argc, argv, "c")) != EOF) {
Isn't argc always going to be non-zero at this point (e.g., argv[0] ==
"write")?
> + switch (c) {
> + case 'c':
> + corrupt = 1;
> + break;
> + default:
> + dbprintf(_("bad option for write command\n"));
> + return 0;
> + }
> + }
> +
> + argc -= optind;
> + argv += optind;
> +
> + if (corrupt) {
> + struct xfs_buf_ops nowrite_ops;
> +
This may not be an explicit failure, but I'd rather not define this on
the stack in the local scope of this branch and then implicitly use it
outside of that scope. Could we move the definition and possibility the
initialization to the top of the function?
Brian
> + /* Temporarily remove write verifier to write bad data */
> + stashed_ops = iocur_top->bp->b_ops;
> + nowrite_ops.verify_read = stashed_ops->verify_read;
> + nowrite_ops.verify_write = xfs_dummy_verify;
> + iocur_top->bp->b_ops = &nowrite_ops;
> + dbprintf(_("Allowing write of corrupted data\n"));
> + }
>
> (*pf)(DB_WRITE, cur_typ->fields, argc, argv);
>
> + if (stashed_ops)
> + iocur_top->bp->b_ops = stashed_ops;
> +
> return 0;
> }
>
> diff --git a/man/man8/xfs_db.8 b/man/man8/xfs_db.8
> index 0764832..46a1f39 100644
> --- a/man/man8/xfs_db.8
> +++ b/man/man8/xfs_db.8
> @@ -728,7 +728,7 @@ and
> bits respectively, and their string equivalent reported
> (but no modifications are made).
> .TP
> -.BI "write [" "field value" "] ..."
> +.BI "write [\-c] [" "field value" "] ..."
> Write a value to disk.
> Specific fields can be set in structures (struct mode),
> or a block can be set to data values (data mode),
> @@ -746,6 +746,12 @@ contents of the block can be shifted or rotated left or right, or filled
> with a sequence, a constant value, or a random value. In this mode
> .B write
> with no arguments gives more information on the allowed commands.
> +.RS 1.0i
> +.TP 0.4i
> +.B \-c
> +Skip write verifiers and CRC recalculation; allows invalid data to be written
> +to disk.
> +.RE
> .SH TYPES
> This section gives the fields in each structure type and their meanings.
> Note that some types of block cover multiple actual structures,
>
> _______________________________________________
> xfs mailing list
> xfs@xxxxxxxxxxx
> http://oss.sgi.com/mailman/listinfo/xfs
_______________________________________________
xfs mailing list
xfs@xxxxxxxxxxx
http://oss.sgi.com/mailman/listinfo/xfs
