RE: [PATCH RESEND 2/12] xfs: Add support FALLOC_FL_INSERT_RANGE for fallocate

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Dave,

I did totally check your review points.
I will share the patch soon.

Thanks for your review!
 
> On Tue, Feb 17, 2015 at 12:47:49AM +0900, Namjae Jeon wrote:
> > From: Namjae Jeon <namjae.jeon@xxxxxxxxxxx>
> >
> > This patch implements fallocate's FALLOC_FL_INSERT_RANGE for XFS.
> >
> > 1) Make sure that both offset and len are block size aligned.
> > 2) Update the i_size of inode by len bytes.
> > 3) Compute the file's logical block number against offset. If the computed
> >    block number is not the starting block of the extent, split the extent
> >    such that the block number is the starting block of the extent.
> > 4) Shift all the extents which are lying bewteen [offset, last allocated extent]
> >    towards right by len bytes. This step will make a hole of len bytes
> >    at offset.
> >
> > Signed-off-by: Namjae Jeon <namjae.jeon@xxxxxxxxxxx>
> > Signed-off-by: Ashish Sangwan <a.sangwan@xxxxxxxxxxx>
> > Reviewed-by: Brian Foster <bfoster@xxxxxxxxxx>
> > ---
> >  fs/xfs/libxfs/xfs_bmap.c |  358 ++++++++++++++++++++++++++++++++++++++++------
> >  fs/xfs/libxfs/xfs_bmap.h |   13 +-
> >  fs/xfs/xfs_bmap_util.c   |  126 +++++++++++-----
> >  fs/xfs/xfs_bmap_util.h   |    2 +
> >  fs/xfs/xfs_file.c        |   38 ++++-
> >  fs/xfs/xfs_trace.h       |    1 +
> >  6 files changed, 455 insertions(+), 83 deletions(-)
> >
> > diff --git a/fs/xfs/libxfs/xfs_bmap.c b/fs/xfs/libxfs/xfs_bmap.c
> > index 61ec015..6699e53 100644
> > --- a/fs/xfs/libxfs/xfs_bmap.c
> > +++ b/fs/xfs/libxfs/xfs_bmap.c
> > @@ -5518,50 +5518,86 @@ xfs_bmse_shift_one(
> >  	int				*current_ext,
> >  	struct xfs_bmbt_rec_host	*gotp,
> >  	struct xfs_btree_cur		*cur,
> > -	int				*logflags)
> > +	int				*logflags,
> > +	enum SHIFT_DIRECTION		SHIFT)
> 
> Please don't shout. ;)
> 
> Lower case for types and variables, upper case for the enum values.
> I also think the "shift" variable should be named "direction",
> too, so the code reads "if (direction == SHIFT_LEFT)" and so is
> clearly self documenting...
> 
> (only commenting once on this, please change it in other places)
> as well ;)
> 
> >  {
> >  	struct xfs_ifork		*ifp;
> >  	xfs_fileoff_t			startoff;
> > -	struct xfs_bmbt_rec_host	*leftp;
> > +	struct xfs_bmbt_rec_host	*contp;
> >  	struct xfs_bmbt_irec		got;
> > -	struct xfs_bmbt_irec		left;
> > +	struct xfs_bmbt_irec		cont;
> 
> Not sure what "cont" is short for. It's used as the "adjacent
> extent" record, so that would be a better name IMO.
> 
> >  	int				error;
> >  	int				i;
> > +	int				total_extents;
> >
> >  	ifp = XFS_IFORK_PTR(ip, whichfork);
> > +	total_extents = ifp->if_bytes / sizeof(xfs_bmbt_rec_t);
> >
> >  	xfs_bmbt_get_all(gotp, &got);
> > -	startoff = got.br_startoff - offset_shift_fsb;
> >
> >  	/* delalloc extents should be prevented by caller */
> >  	XFS_WANT_CORRUPTED_RETURN(!isnullstartblock(got.br_startblock));
> >
> > -	/*
> > -	 * Check for merge if we've got an extent to the left, otherwise make
> > -	 * sure there's enough room at the start of the file for the shift.
> > -	 */
> > -	if (*current_ext) {
> > -		/* grab the left extent and check for a large enough hole */
> > -		leftp = xfs_iext_get_ext(ifp, *current_ext - 1);
> > -		xfs_bmbt_get_all(leftp, &left);
> > +	if (SHIFT == SHIFT_LEFT) {
> > +		startoff = got.br_startoff - offset_shift_fsb;
> >
> > -		if (startoff < left.br_startoff + left.br_blockcount)
> > +		/*
> > +		 * Check for merge if we've got an extent to the left,
> > +		 * otherwise make sure there's enough room at the start
> > +		 * of the file for the shift.
> > +		 */
> > +		if (*current_ext) {
> > +			/*
> > +			 * grab the left extent and check for a large
> > +			 * enough hole.
> > +			 */
> > +			contp = xfs_iext_get_ext(ifp, *current_ext - 1);
> > +			xfs_bmbt_get_all(contp, &cont);
> > +
> > +			if (startoff < cont.br_startoff + cont.br_blockcount)
> > +				return -EINVAL;
> > +
> > +			/* check whether to merge the extent or shift it down */
> > +			if (xfs_bmse_can_merge(&cont, &got, offset_shift_fsb)) {
> > +				return xfs_bmse_merge(ip, whichfork,
> > +						      offset_shift_fsb,
> > +						      *current_ext, gotp, contp,
> > +						      cur, logflags);
> > +			}
> > +		} else if (got.br_startoff < offset_shift_fsb)
> >  			return -EINVAL;
> 
> This would be better written:
> 
> 		if (!*current_ext) {
> 			if (got.br_startoff < offset_shift_fsb)
> 				return -EINVAL;
> 			goto update_current_ext;
> 		}
> 
> and then the rest of the code in the shift left branch can drop a
> level of indent and hence become less congested and easier to read.
> 
> 
> > +	} else {
> > +		startoff = got.br_startoff + offset_shift_fsb;
> > +		/*
> > +		 * If this is not the last extent in the file, make sure there's
> > +		 * enough room between current extent and next extent for
> > +		 * accommodating the shift.
> > +		 */
> > +		if (*current_ext < (total_extents - 1)) {
> > +			contp = xfs_iext_get_ext(ifp, *current_ext + 1);
> > +			xfs_bmbt_get_all(contp, &cont);
> > +			if (startoff + got.br_blockcount > cont.br_startoff)
> > +				return -EINVAL;
> >
> > -		/* check whether to merge the extent or shift it down */
> > -		if (xfs_bmse_can_merge(&left, &got, offset_shift_fsb)) {
> > -			return xfs_bmse_merge(ip, whichfork, offset_shift_fsb,
> > -					      *current_ext, gotp, leftp, cur,
> > -					      logflags);
> > +			/*
> > +			 * Unlike a left shift (which involves a hole punch),
> > +			 * a right shift does not modify extent neighbors
> > +			 * in any way. We should never find mergeable extents
> > +			 * in this scenario. Check anyways and warn if we
> > +			 * encounter two extents that could be one.
> > +			 */
> > +			if (xfs_bmse_can_merge(&got, &cont,  offset_shift_fsb))
> > +				WARN_ON_ONCE(1);
> >  		}
> 
> Similarly:
> 		/* nothing to move if this is the last extent */
> 		if (*current_ext >= total_extents)
> 			goto update_current_ext;
> 
> > -	} else if (got.br_startoff < offset_shift_fsb)
> > -		return -EINVAL;
> > -
> > +	}
> >  	/*
> >  	 * Increment the extent index for the next iteration, update the start
> >  	 * offset of the in-core extent and update the btree if applicable.
> >  	 */
> > -	(*current_ext)++;
> 
> update_current_ext:
> > +	if (SHIFT == SHIFT_LEFT)
> > +		(*current_ext)++;
> > +	else
> > +		(*current_ext)--;
> >  	xfs_bmbt_set_startoff(gotp, startoff);
> >  	*logflags |= XFS_ILOG_CORE;
> >  	if (!cur) {
> > @@ -5581,10 +5617,10 @@ xfs_bmse_shift_one(
> >  }
> >
> >  /*
> > - * Shift extent records to the left to cover a hole.
> > + * Shift extent records to the left/right to cover/create a hole.
> >   *
> >   * The maximum number of extents to be shifted in a single operation is
> > - * @num_exts. @start_fsb specifies the file offset to start the shift and the
> > + * @num_exts. @stop_fsb specifies the file offset at which to stop shift and the
> >   * file offset where we've left off is returned in @next_fsb. @offset_shift_fsb
> >   * is the length by which each extent is shifted. If there is no hole to shift
> >   * the extents into, this will be considered invalid operation and we abort
> > @@ -5594,12 +5630,13 @@ int
> >  xfs_bmap_shift_extents(
> >  	struct xfs_trans	*tp,
> >  	struct xfs_inode	*ip,
> > -	xfs_fileoff_t		start_fsb,
> > +	xfs_fileoff_t		*next_fsb,
> >  	xfs_fileoff_t		offset_shift_fsb,
> >  	int			*done,
> > -	xfs_fileoff_t		*next_fsb,
> > +	xfs_fileoff_t		stop_fsb,
> >  	xfs_fsblock_t		*firstblock,
> >  	struct xfs_bmap_free	*flist,
> > +	enum SHIFT_DIRECTION	SHIFT,
> >  	int			num_exts)
> >  {
> >  	struct xfs_btree_cur		*cur = NULL;
> > @@ -5609,10 +5646,11 @@ xfs_bmap_shift_extents(
> >  	struct xfs_ifork		*ifp;
> >  	xfs_extnum_t			nexts = 0;
> >  	xfs_extnum_t			current_ext;
> > +	xfs_extnum_t			total_extents;
> > +	xfs_extnum_t			stop_extent;
> >  	int				error = 0;
> >  	int				whichfork = XFS_DATA_FORK;
> >  	int				logflags = 0;
> > -	int				total_extents;
> >
> >  	if (unlikely(XFS_TEST_ERROR(
> >  	    (XFS_IFORK_FORMAT(ip, whichfork) != XFS_DINODE_FMT_EXTENTS &&
> > @@ -5628,6 +5666,7 @@ xfs_bmap_shift_extents(
> >
> >  	ASSERT(xfs_isilocked(ip, XFS_IOLOCK_EXCL));
> >  	ASSERT(xfs_isilocked(ip, XFS_ILOCK_EXCL));
> > +	ASSERT(SHIFT == SHIFT_LEFT || SHIFT == SHIFT_RIGHT);
> >
> >  	ifp = XFS_IFORK_PTR(ip, whichfork);
> >  	if (!(ifp->if_flags & XFS_IFEXTENTS)) {
> > @@ -5645,43 +5684,85 @@ xfs_bmap_shift_extents(
> >  	}
> >
> >  	/*
> > +	 * There may be delalloc extents in the data fork before the range we
> > +	 * are collapsing out, so we cannot use the count of real extents here.
> > +	 * Instead we have to calculate it from the incore fork.
> > +	 */
> > +	total_extents = ifp->if_bytes / sizeof(xfs_bmbt_rec_t);
> > +	if (total_extents == 0) {
> > +		*done = 1;
> > +		goto del_cursor;
> > +	}
> > +
> > +	/*
> > +	 * In case of first right shift, we need to initialize next_fsb
> > +	 */
> > +	if (*next_fsb == NULLFSBLOCK) {
> > +		ASSERT(SHIFT == SHIFT_RIGHT);
> 
> This should be at the top of the function. i.e.
> 
> 	ASSERT(*next_fsb != NULLFSBLOCK || direction == SHIFT_RIGHT)
> 
> > +		gotp = xfs_iext_get_ext(ifp, total_extents - 1);
> > +		xfs_bmbt_get_all(gotp, &got);
> > +		*next_fsb = got.br_startoff;
> > +		if (stop_fsb > *next_fsb) {
> > +			*done = 1;
> > +			goto del_cursor;
> > +		}
> > +	}
> > +
> > +	/* Lookup the extent index at which we have to stop */
> > +	if (SHIFT == SHIFT_RIGHT) {
> > +		gotp = xfs_iext_bno_to_ext(ifp, stop_fsb, &stop_extent);
> > +		/* Make stop_extent exclusive of shift range */
> > +		stop_extent--;
> > +	} else
> > +		stop_extent = total_extents;
> > +
> > +	/*
> >  	 * Look up the extent index for the fsb where we start shifting. We can
> >  	 * henceforth iterate with current_ext as extent list changes are locked
> >  	 * out via ilock.
> >  	 *
> >  	 * gotp can be null in 2 cases: 1) if there are no extents or 2)
> > -	 * start_fsb lies in a hole beyond which there are no extents. Either
> > +	 * *next_fsb lies in a hole beyond which there are no extents. Either
> >  	 * way, we are done.
> >  	 */
> > -	gotp = xfs_iext_bno_to_ext(ifp, start_fsb, &current_ext);
> > +	gotp = xfs_iext_bno_to_ext(ifp, *next_fsb, &current_ext);
> >  	if (!gotp) {
> >  		*done = 1;
> >  		goto del_cursor;
> >  	}
> >
> > -	/*
> > -	 * There may be delalloc extents in the data fork before the range we
> > -	 * are collapsing out, so we cannot use the count of real extents here.
> > -	 * Instead we have to calculate it from the incore fork.
> > -	 */
> > -	total_extents = ifp->if_bytes / sizeof(xfs_bmbt_rec_t);
> > -	while (nexts++ < num_exts && current_ext < total_extents) {
> > +	/* some sanity checking before we finally start shifting extents */
> > +	if ((SHIFT == SHIFT_LEFT && current_ext >= stop_extent) ||
> > +	     (SHIFT == SHIFT_RIGHT && current_ext <= stop_extent)) {
> > +		error = EIO;
> 
> 		error = -EIO;
> 
> > +		goto del_cursor;
> > +	}
> > +
> > +	while (nexts++ < num_exts) {
> >  		error = xfs_bmse_shift_one(ip, whichfork, offset_shift_fsb,
> > -					&current_ext, gotp, cur, &logflags);
> > +					   &current_ext, gotp, cur, &logflags,
> > +					   SHIFT);
> >  		if (error)
> >  			goto del_cursor;
> > +		/*
> > +		 * In case there was an extent merge after shifting extent,
> > +		 * extent numbers would change.
> > +		 * Update total extent count and grab the next record.
> > +		 */
> 
> 		/*
> 		 * If there was an extent merge during the shift, the extent
> 		 * count can change. Update the total and grade the next record.
> 		 */
> 
> > +		if (SHIFT == SHIFT_LEFT) {
> > +			total_extents = ifp->if_bytes / sizeof(xfs_bmbt_rec_t);
> > +			stop_extent = total_extents;
> > +		}
> >
> > -		/* update total extent count and grab the next record */
> > -		total_extents = ifp->if_bytes / sizeof(xfs_bmbt_rec_t);
> > -		if (current_ext >= total_extents)
> > +		if (current_ext == stop_extent) {
> > +			*done = 1;
> > +			*next_fsb = NULLFSBLOCK;
> >  			break;
> > +		}
> >  		gotp = xfs_iext_get_ext(ifp, current_ext);
> >  	}
> >
> > -	/* Check if we are done */
> > -	if (current_ext == total_extents) {
> > -		*done = 1;
> > -	} else if (next_fsb) {
> > +	if (!*done) {
> >  		xfs_bmbt_get_all(gotp, &got);
> >  		*next_fsb = got.br_startoff;
> >  	}
> > @@ -5696,3 +5777,192 @@ del_cursor:
> >
> >  	return error;
> >  }
> > +
> > +/*
> > + * Splits an extent into two extents at split_fsb block that it is
> > + * the first block of the current_ext. @current_ext is a target extent
> > + * to be split. @split_fsb is a block where the extents is split.
> > + * If split_fsb lies in a hole or the first block of extents, just return 0.
> > + */
> > +STATIC int
> > +xfs_bmap_split_extent_at(
> > +	struct xfs_trans	*tp,
> > +	struct xfs_inode	*ip,
> > +	xfs_fileoff_t		split_fsb,
> > +	xfs_fsblock_t		*firstfsb,
> > +	struct xfs_bmap_free	*free_list)
> > +{
> > +	int				whichfork = XFS_DATA_FORK;
> > +	struct xfs_btree_cur		*cur = NULL;
> > +	struct xfs_bmbt_rec_host	*gotp;
> > +	struct xfs_bmbt_irec		got;
> > +	struct xfs_bmbt_irec		new; /* split extent */
> > +	struct xfs_mount		*mp = ip->i_mount;
> > +	struct xfs_ifork		*ifp;
> > +	xfs_fsblock_t			gotblkcnt; /* new block count for got */
> > +	xfs_extnum_t			current_ext;
> > +	int				error = 0;
> > +	int				logflags = 0;
> > +	int				i = 0;
> > +
> > +	if (unlikely(XFS_TEST_ERROR(
> > +	    (XFS_IFORK_FORMAT(ip, whichfork) != XFS_DINODE_FMT_EXTENTS &&
> > +	     XFS_IFORK_FORMAT(ip, whichfork) != XFS_DINODE_FMT_BTREE),
> > +	     mp, XFS_ERRTAG_BMAPIFORMAT, XFS_RANDOM_BMAPIFORMAT))) {
> > +		XFS_ERROR_REPORT("xfs_bmap_split_extent_at",
> > +				 XFS_ERRLEVEL_LOW, mp);
> > +		return -EFSCORRUPTED;
> > +	}
> > +
> > +	if (XFS_FORCED_SHUTDOWN(mp))
> > +		return -EIO;
> > +
> > +	ifp = XFS_IFORK_PTR(ip, whichfork);
> > +	if (!(ifp->if_flags & XFS_IFEXTENTS)) {
> > +		/* Read in all the extents */
> > +		error = xfs_iread_extents(tp, ip, whichfork);
> > +		if (error)
> > +			return error;
> > +	}
> > +
> > +	gotp = xfs_iext_bno_to_ext(ifp, split_fsb, &current_ext);
> > +	/*
> > +	 * gotp can be null in 2 cases: 1) if there are no extents
> > +	 * or 2) split_fsb lies in a hole beyond which there are
> > +	 * no extents. Either way, we are done.
> > +	 */
> > +	if (!gotp)
> > +		return 0;
> 
> Comment can go before the call to xfs_iext_bno_to_ext().
> 
> > +
> > +	xfs_bmbt_get_all(gotp, &got);
> > +
> > +	/*
> > +	 * Check split_fsb lies in a hole or the start boundary offset
> > +	 * of the extent.
> > +	 */
> > +	if (got.br_startoff >= split_fsb)
> > +		return 0;
> > +
> > +	gotblkcnt = split_fsb - got.br_startoff;
> > +	new.br_startoff = split_fsb;
> > +	new.br_startblock = got.br_startblock + gotblkcnt;
> > +	new.br_blockcount = got.br_blockcount - gotblkcnt;
> > +	new.br_state = got.br_state;
> > +
> > +	if (ifp->if_flags & XFS_IFBROOT) {
> > +		cur = xfs_bmbt_init_cursor(mp, tp, ip, whichfork);
> > +		cur->bc_private.b.firstblock = *firstfsb;
> > +		cur->bc_private.b.flist = free_list;
> > +		cur->bc_private.b.flags = 0;
> > +	}
> > +
> > +	if (cur) {
> 
> No need to close the XFS_IFBROOT branch and then check for cur;
> we just allocated it inside the XFS_IFBROOT branch!
> 
> > +		error = xfs_bmbt_lookup_eq(cur, got.br_startoff,
> > +				got.br_startblock,
> > +				got.br_blockcount,
> > +				&i);
> > +		if (error)
> > +			goto del_cursor;
> > +		XFS_WANT_CORRUPTED_GOTO(i == 1, del_cursor);
> > +	}
> 
> ....
> 
> > @@ -1427,20 +1429,23 @@ xfs_collapse_file_space(
> >
> >  	/*
> >  	 * Writeback and invalidate cache for the remainder of the file as we're
> > -	 * about to shift down every extent from the collapse range to EOF. The
> > -	 * free of the collapse range above might have already done some of
> > -	 * this, but we shouldn't rely on it to do anything outside of the range
> > -	 * that was freed.
> > +	 * about to shift down every extent from offset to EOF.
> >  	 */
> >  	error = filemap_write_and_wait_range(VFS_I(ip)->i_mapping,
> > -					     offset + len, -1);
> > +					     offset, -1);
> >  	if (error)
> >  		return error;
> >  	error = invalidate_inode_pages2_range(VFS_I(ip)->i_mapping,
> > -					(offset + len) >> PAGE_CACHE_SHIFT, -1);
> > +					offset >> PAGE_CACHE_SHIFT, -1);
> >  	if (error)
> >  		return error;
> >
> > +	if (SHIFT == SHIFT_RIGHT) {
> > +		error = xfs_bmap_split_extent(ip, stop_fsb);
> > +		if (error)
> > +			return error;
> > +	}
> 
> This needs a comment explaining why we are splitting an extent here.
> 
> > diff --git a/fs/xfs/xfs_file.c b/fs/xfs/xfs_file.c
> > index 1cdba95..222a91a 100644
> > --- a/fs/xfs/xfs_file.c
> > +++ b/fs/xfs/xfs_file.c
> > @@ -823,11 +823,13 @@ xfs_file_fallocate(
> >  	long			error;
> >  	enum xfs_prealloc_flags	flags = 0;
> >  	loff_t			new_size = 0;
> > +	int			do_file_insert = 0;
> 
> bool rather than int.
> 
> >
> >  	if (!S_ISREG(inode->i_mode))
> >  		return -EINVAL;
> >  	if (mode & ~(FALLOC_FL_KEEP_SIZE | FALLOC_FL_PUNCH_HOLE |
> > -		     FALLOC_FL_COLLAPSE_RANGE | FALLOC_FL_ZERO_RANGE))
> > +		     FALLOC_FL_COLLAPSE_RANGE | FALLOC_FL_ZERO_RANGE |
> > +		     FALLOC_FL_INSERT_RANGE))
> >  		return -EOPNOTSUPP;
> 
> This should use a local define before the function such as:
> 
> #define XFS_FALLOC_FL_SUPPORTED		\
> 		(FALLOC_FL_KEEP_SIZE | FALLOC_FL_PUNCH_HOLE | \
> 		 FALLOC_FL_COLLAPSE_RANGE | FALLOC_FL_ZERO_RANGE | \
> 		 FALLOC_FL_INSERT_RANGE)
> 
> This is similar to how we define supported checks for FIEMAP
> operations in xfs_vn_fiemap().
> 
> >
> >  	xfs_ilock(ip, XFS_IOLOCK_EXCL);
> > @@ -857,6 +859,28 @@ xfs_file_fallocate(
> >  		error = xfs_collapse_file_space(ip, offset, len);
> >  		if (error)
> >  			goto out_unlock;
> > +	} else if (mode & FALLOC_FL_INSERT_RANGE) {
> > +		unsigned blksize_mask = (1 << inode->i_blkbits) - 1;
> > +
> > +		if (offset & blksize_mask || len & blksize_mask) {
> > +			error = -EINVAL;
> > +			goto out_unlock;
> > +		}
> > +
> > +		/* Check for wrap through zero */
> > +		if (inode->i_size + len > inode->i_sb->s_maxbytes) {
> > +			error = -EFBIG;
> > +			goto out_unlock;
> > +		}
> 
> At first I thought that was a duplicate check of what is in
> vfs_fallocate() (i.e. off + len > s_maxbytes). Can you change the
> comment to read something like:
> 
> 		/* check the new inode size does not wrap through zero */
> 
> > +
> > +		/* Offset should be less than i_size */
> > +		if (offset >= i_size_read(inode)) {
> > +			error = -EINVAL;
> > +			goto out_unlock;
> > +		}
> > +
> > +		new_size = i_size_read(inode) + len;
> > +		do_file_insert = 1;
> 
> Why do you use inode->i_size onthe wrap check, yet i_size_read()
> twice here?
> 
> >  	} else {
> >  		flags |= XFS_PREALLOC_SET;
> >
> > @@ -891,8 +915,20 @@ xfs_file_fallocate(
> >  		iattr.ia_valid = ATTR_SIZE;
> >  		iattr.ia_size = new_size;
> >  		error = xfs_setattr_size(ip, &iattr);
> > +		if (error)
> > +			goto out_unlock;
> >  	}
> >
> > +	/*
> > +	 * Some operations are performed after the inode size is updated. For
> > +	 * example, insert range expands the address space of the file, shifts
> > +	 * all subsequent extents to create a hole inside the file. Updating
> > +	 * the size first ensures that shifted extents aren't left hanging
> > +	 * past EOF in the event of a crash or failure.
> > +	 */
> 
> 	/*
> 	 * Perform hole insertion now that the file size has been
> 	 * updated so that if we crash during the operation we don't
> 	 * leave shifted extents past EOF and hence losing access to
> 	 * the data that is contained within them.
> 	 */
> > +	if (do_file_insert)
> > +		error = xfs_insert_file_space(ip, offset, len);
> > +
> >  out_unlock:
> >  	xfs_iunlock(ip, XFS_IOLOCK_EXCL);
> >  	return error;
> 
> Cheers,
> 
> Dave.
> --
> Dave Chinner
> david@xxxxxxxxxxxxx

_______________________________________________
xfs mailing list
xfs@xxxxxxxxxxx
http://oss.sgi.com/mailman/listinfo/xfs




[Index of Archives]     [Linux XFS Devel]     [Linux Filesystem Development]     [Filesystem Testing]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux