> > +_require_scratch > > +_require_xfs_io_command "fiemap" > > +_require_xfs_io_command "finsert" > > +_require_xfs_io_command "fcollapse" > > +_do_die_on_error=y > > What is _do_die_on_error for? Seems like that's only relevant for using > _do()? > > > +src=$SCRATCH_MNT/testfile > > +dest=$SCRATCH_MNT/testfile.dest > > +BLOCKS=100 > > +BSIZE=`get_block_size $SCRATCH_MNT` > > + > > rm -f $seqres.full > > ... to clear out the old .full file. > > > +_scratch_mkfs MKFS_OPTIONS >> $seqres.full 2>&1 > > You don't need MKFS_OPTIONS here. In fact, this currently causes a mkfs > failure (missing $) that we don't detect because we aren't checking that > the mkfs actually succeeds. All we need to do here is: > > _scratch_mkfs >> $seqres.full 2>&1 || _fail "mkfs failed" > > If you dig down into _scratch_mkfs(), you'll see that it already > includes $MKFS_OPTIONS and thus formats the fs as specified by the test > config. > > It might also be a good idea to check that the _scratch_mount below > succeeds as well... > > > +_scratch_mount >> $seqres.full 2>&1 > > +length=$(($BLOCKS * $BSIZE)) > > + > > +# Write file > > +$XFS_IO_PROG -f -c "pwrite 0 $length" -c fsync $src > /dev/null > > +cp $src $dest > > + > > It seems quite unlikely for this to not create a single extent given the > smallish file size and freshly created fs, but who knows with various fs > types, test configurations, test device sizes, etc. Another option could > be to check the starting extent count and verify the ending extent count > matches, rather than assume hardcoded values of 1. > > To be honest, even just including the starting extent count in the > golden output (e.g., add an fiemap command here as well) might be good > enough to distinguish that failure path from something going wrong in > the collapse path, should it ever occur. > > > +# Insert alternate blocks > > +for (( j=0; j < $(($BLOCKS/2)); j++ )); do > > + offset=$((($j*$BSIZE)*2)) > > + $XFS_IO_PROG -c "finsert $offset $BSIZE" $dest > /dev/null > > +done > > + > > +# Check if 100 extents are present > > +$XFS_IO_PROG -c "fiemap -v" $dest | grep "^ *[0-9]*:" |wc -l > > + > > +_check_scratch_fs > > +if [ $? -ne 0 ]; then > > + status=1 > > + exit > > +fi > > + > > +# Collapse alternate blocks > > +for (( j=0; j < $(($BLOCKS/2)); j++ )); do > > + offset=$((($j*$BSIZE))) > > + $XFS_IO_PROG -c "fcollapse $offset $BSIZE" $dest > /dev/null > > +done > > + > > +# Check if 1 extents are present > > +$XFS_IO_PROG -c "fiemap -v" $dest | grep "^ *[0-9]*:" |wc -l > > + > > +# compare original file and test file. > > +cmp $src $dest || _fail "file bytes check failed" > > + > > +_check_scratch_fs > > +if [ $? -ne 0 ]; then > > + status=1 > > + exit > > +fi > > + > > +umount $SCRATCH_MNT > > + > > The scratch device is unmounted and checked after each test that uses it > so the above is unnecessary. I checked your each review points. and updated patch. Could you please review below patch ? Thanks a lot! ------------------------------------------------------------------------------ Subject: [PATCH v9 9/11] xfstests: generic/043: Test multiple fallocate insert/collapse range calls This testcase(043) tries to test finsert range a single alternate block mulitiple times and test merge code of collase range. Signed-off-by: Namjae Jeon <namjae.jeon@xxxxxxxxxxx> Signed-off-by: Ashish Sangwan <a.sangwan@xxxxxxxxxxx> --- tests/generic/043 | 96 +++++++++++++++++++++++++++++++++++++++++++++++++ tests/generic/043.out | 2 + tests/generic/group | 1 + 3 files changed, 99 insertions(+), 0 deletions(-) create mode 100644 tests/generic/043 create mode 100644 tests/generic/043.out diff --git a/tests/generic/043 b/tests/generic/043 new file mode 100644 index 0000000..a6f91ce --- /dev/null +++ b/tests/generic/043 @@ -0,0 +1,96 @@ +#! /bin/bash +# FS QA Test No. generic/043 +# +# Test multiple fallocate insert/collapse range calls on same file. +# Call insert range a single alternate block multiple times until the file +# is left with 100 extents and as much number of extents. And Call collapse +# range about the previously inserted ranges to test merge code of collapse +# range. Also check for data integrity and file system consistency. +#----------------------------------------------------------------------- +# Copyright (c) 2014 Samsung Electronics. All Rights Reserved. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation. +# +# This program is distributed in the hope that it would be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write the Free Software Foundation, +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +# +#----------------------------------------------------------------------- +# + +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "rm -f $tmp.*; exit \$status" 0 1 2 3 15 + +# get standard environment, filters and checks +. ./common/rc +. ./common/filter + +# real QA test starts here +_supported_fs generic +_supported_os Linux + +_require_scratch +_require_xfs_io_command "fiemap" +_require_xfs_io_command "finsert" +_require_xfs_io_command "fcollapse" +_do_die_on_error=always +src=$SCRATCH_MNT/testfile +dest=$SCRATCH_MNT/testfile.dest +BLOCKS=100 +BSIZE=`get_block_size $SCRATCH_MNT` +rm -f $seqres.full + +_scratch_mkfs >> $seqres.full 2>&1 || _fail "mkfs failed" +_scratch_mount || _fail "mount failed" +length=$(($BLOCKS * $BSIZE)) + +# Write file +_do "$XFS_IO_PROG -f -c \"pwrite 0 $length\" -c fsync $src" +cp $src $dest +extent_before=`$XFS_IO_PROG -c "fiemap -v" $dest | grep "^ *[0-9]*:" |wc -l` + +# Insert alternate blocks +for (( j=0; j < $(($BLOCKS/2)); j++ )); do + offset=$((($j*$BSIZE)*2)) + _do "$XFS_IO_PROG -c \"finsert $offset $BSIZE\" $dest" +done + +# Check if 100 extents are present +$XFS_IO_PROG -c "fiemap -v" $dest | grep "^ *[0-9]*:" |wc -l + +_check_scratch_fs +if [ $? -ne 0 ]; then + status=1 + exit +fi + +# Collapse alternate blocks +for (( j=0; j < $(($BLOCKS/2)); j++ )); do + offset=$((($j*$BSIZE))) + _do "$XFS_IO_PROG -c \"fcollapse $offset $BSIZE\" $dest" +done + +extent_after=`$XFS_IO_PROG -c "fiemap -v" $dest | grep "^ *[0-9]*:" |wc -l` +if [ $extent_before -ne $extent_after ]; then + echo "extents mismatched before = $extent_before after = $extent_after" +fi + +# compare original file and test file. +cmp $src $dest || _fail "file bytes check failed" + +# success, all done +status=0 +exit diff --git a/tests/generic/043.out b/tests/generic/043.out new file mode 100644 index 0000000..28427c5 --- /dev/null +++ b/tests/generic/043.out @@ -0,0 +1,2 @@ +QA output created by 043 +100 diff --git a/tests/generic/group b/tests/generic/group index c0944b3..0a10bdd 100644 --- a/tests/generic/group +++ b/tests/generic/group @@ -45,6 +45,7 @@ 040 auto quick prealloc 041 auto quick prealloc 042 auto quick prealloc +043 auto quick prealloc 053 acl repair auto quick 062 attr udf auto quick 068 other auto freeze dangerous stress -- 1.7.7 _______________________________________________ xfs mailing list xfs@xxxxxxxxxxx http://oss.sgi.com/mailman/listinfo/xfs
