On Oct 13, 2014, at 11:19 AM, Emmanuel Florac <eflorac@xxxxxxxxxxxxxx> wrote:
Le Mon, 13 Oct 2014 11:05:49 +0100
Tom Mason <tom_mason@xxxxxx > écrivait:
> > Which means the filesystem tried to read the offset at 62GB and the
> > underlying device failed it with EIO. That's not an XFS failure.
> > What error is there in dmesg when you run that xfs_repair command?
>
> What's EIO?
> 'Error in dmesg' How would I report this info to you?
r 1
[ 6.829125] ehci-pci 0000:00:04.1: debug port 1
[ 6.829162] ehci-pci 0000:00:04.1: cache line size of 256 is not supported
[ 6.829185] ehci-pci 0000:00:04.1: irq 22, io mem 0xd0489200
[ 6.840043] ehci-pci 0000:00:04.1: USB 2.0 started, EHCI 1.00
[ 6.840112] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 6.840116] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 6.840119] usb usb1: Product: EHCI Host Controller
[ 6.840122] usb usb1: Manufacturer: Linux 3.13.0-32-generic ehci_hcd
[ 6.840125] usb usb1: SerialNumber: 0000:00:04.1
[ 6.840295] hub 1-0:1.0: USB hub found
[ 6.840307] hub 1-0:1.0: 7 ports detected
[ 6.840791] ehci-pci 0000:00:06.1: EHCI Host Controller
[ 6.840799] ehci-pci 0000:00:06.1: new USB bus registered, assigned bus number 2
[ 6.840809] ehci-pci 0000:00:06.1: debug port 1
[ 6.840837] ehci-pci 0000:00:06.1: cache line size of 256 is not supported
[ 6.840855] ehci-pci 0000:00:06.1: irq 20, io mem 0xd0489100
[ 6.852097] ehci-pci 0000:00:06.1: USB 2.0 started, EHCI 1.00
[ 6.852153] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 6.852156] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 6.852160] usb usb2: Product: EHCI Host Controller
[ 6.852163] usb usb2: Manufacturer: Linux 3.13.0-32-generic ehci_hcd
[ 6.852166] usb usb2: SerialNumber: 0000:00:06.1
[ 6.852324] hub 2-0:1.0: USB hub found
[ 6.852337] hub 2-0:1.0: 5 ports detected
[ 6.852595] ehci-platform: EHCI generic platform driver
[ 6.852609] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 6.852611] ohci-pci: OHCI PCI platform driver
[ 6.852818] ohci-pci 0000:00:04.0: OHCI PCI host controller
[ 6.852825] ohci-pci 0000:00:04.0: new USB bus registered, assigned bus number 3
[ 6.852852] ohci-pci 0000:00:04.0: irq 23, io mem 0xd0488000
[ 6.910128] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 6.910132] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 6.910135] usb usb3: Product: OHCI PCI host controller
[ 6.910138] usb usb3: Manufacturer: Linux 3.13.0-32-generic ohci_hcd
[ 6.910141] usb usb3: SerialNumber: 0000:00:04.0
[ 6.910291] hub 3-0:1.0: USB hub found
[ 6.910304] hub 3-0:1.0: 7 ports detected
[ 6.910784] ohci-pci 0000:00:06.0: OHCI PCI host controller
[ 6.910792] ohci-pci 0000:00:06.0: new USB bus registered, assigned bus number 4
[ 6.910817] ohci-pci 0000:00:06.0: irq 21, io mem 0xd0487000
[ 6.966125] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 6.966130] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 6.966133] usb usb4: Product: OHCI PCI host controller
[ 6.966136] usb usb4: Manufacturer: Linux 3.13.0-32-generic ohci_hcd
[ 6.966139] usb usb4: SerialNumber: 0000:00:06.0
[ 6.966289] hub 4-0:1.0: USB hub found
[ 6.966302] hub 4-0:1.0: 5 ports detected
[ 6.966553] ohci-platform: OHCI generic platform driver
[ 6.966564] uhci_hcd: USB Universal Host Controller Interface driver
[ 6.966638] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 7.993878] i8042: No controller found
[ 7.993976] mousedev: PS/2 mouse device common for all mice
[ 7.994467] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 7.994520] rtc_cmos 00:06: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[ 7.994609] device-mapper: uevent: version 1.0.3
[ 7.994707] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@xxxxxxxxxx
[ 7.994714] ledtrig-cpu: registered to indicate activity on CPUs
[ 7.994853] TCP: cubic registered
[ 7.994990] NET: Registered protocol family 10
[ 7.995233] NET: Registered protocol family 17
[ 7.995252] Key type dns_resolver registered
[ 7.995588] Loading compiled-in X.509 certificates
[ 7.997230] Loaded X.509 cert 'Magrathea: Glacier signing key: 5e3c0f9ca6e36543535fa2bb5b709e84f16da7c7'
[ 7.997251] registered taskstats version 1
[ 8.001292] Key type trusted registered
[ 8.004490] Key type encrypted registered
[ 8.007652] AppArmor: AppArmor sha1 policy hashing enabled
[ 8.007656] IMA: No TPM chip found, activating TPM-bypass!
[ 8.008268] regulator-dummy: disabling
[ 8.008332] Magic number: 2:86:43
[ 8.008478] rtc_cmos 00:06: setting system clock to 2014-10-13 20:01:54 UTC (1413230514)
[ 8.009069] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 8.009072] EDD information not available.
[ 8.009129] PM: Hibernation image not present or could not be loaded.
[ 8.010552] Freeing unused kernel memory: 1336K (ffffffff81d1f000 - ffffffff81e6d000)
[ 8.010554] Write protecting the kernel read-only data: 12288k
[ 8.012782] Freeing unused kernel memory: 816K (ffff880001734000 - ffff880001800000)
[ 8.014538] Freeing unused kernel memory: 696K (ffff880001b52000 - ffff880001c00000)
[ 8.027129] systemd-udevd[100]: starting version 204
[ 8.050650] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[ 8.050899] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 16
[ 8.060498] [drm] Initialized drm 1.1.0 20060810
[ 8.088254] firewire_ohci 0000:04:00.0: irq 43 for MSI/MSI-X
[ 8.090165] [drm] radeon kernel modesetting enabled.
[ 8.090427] [drm] initializing kernel modesetting (RV770 0x1002:0x944A 0x106B:0x944A).
[ 8.090442] [drm] register mmio base: 0xD0220000
[ 8.090443] [drm] register mmio size: 65536
[ 8.090492] radeon 0000:02:00.0: Invalid ROM contents
[ 8.091227] ATOM BIOS: 113
[ 8.091254] radeon 0000:02:00.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
[ 8.091256] radeon 0000:02:00.0: GTT: 1024M 0x0000000020000000 - 0x000000005FFFFFFF
[ 8.091258] [drm] Detected VRAM RAM=512M, BAR=256M
[ 8.091259] [drm] RAM width 256bits DDR
[ 8.091404] [TTM] Zone kernel: Available graphics memory: 4076328 kiB
[ 8.091405] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 8.091406] [TTM] Initializing pool allocator
[ 8.091411] [TTM] Initializing DMA pool allocator
[ 8.091427] [drm] radeon: 512M of VRAM memory ready
[ 8.091428] [drm] radeon: 1024M of GTT memory ready.
[ 8.091441] [drm] Loading RV770 Microcode
[ 8.091512] [drm] GART: num cpu pages 262144, num gpu pages 262144
[ 8.094226] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[ 8.111879] usb 1-4: new high-speed USB device number 2 using ehci-pci
[ 8.111916] ssb: Found chip with id 0x4322, rev 0x01 and package 0x0A
[ 8.111921] ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x17, vendor 0x4243)
[ 8.111927] ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x10, vendor 0x4243)
[ 8.111932] ssb: Core 2 found: PCI-E (cc 0x820, rev 0x0B, vendor 0x4243)
[ 8.111937] ssb: Core 3 found: PCI (cc 0x804, rev 0x0E, vendor 0x4243)
[ 8.111942] ssb: Core 4 found: USB 2.0 Device (cc 0x81A, rev 0x05, vendor 0x4243)
[ 8.111947] ssb: Core 5 found: UNKNOWN (cc 0x8FF, rev 0x00, vendor 0x4243)
[ 8.111953] ssb: Core 6 found: Internal Memory (cc 0x80E, rev 0x03, vendor 0x4243)
[ 8.113736] [drm] PCIE GART of 1024M enabled (table at 0x0000000000040000).
[ 8.113775] radeon 0000:02:00.0: WB enabled
[ 8.113778] radeon 0000:02:00.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff88023352ec00
[ 8.113780] radeon 0000:02:00.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0xffff88023352ec0c
[ 8.113783] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 8.113784] [drm] Driver supports precise vblank timestamp query.
[ 8.113805] radeon 0000:02:00.0: irq 44 for MSI/MSI-X
[ 8.113816] radeon 0000:02:00.0: radeon: using MSI.
[ 8.113841] [drm] radeon: irq initialized.
[ 8.129822] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:25:00:a5:98:42
[ 8.129825] forcedeth 0000:00:0a.0: highdma csum pwrctl gbit lnktim msi desc-v3
[ 8.144058] firewire_ohci 0000:04:00.0: added OHCI v1.10 device as card 0, 8 IR + 8 IT contexts, quirks 0x0
[ 8.161628] [drm] ring test on 0 succeeded in 0 usecs
[ 8.161806] [drm] ring test on 3 succeeded in 0 usecs
[ 8.162282] [drm] Enabling audio 0 support
[ 8.162342] [drm] ib test on ring 0 succeeded in 0 usecs
[ 8.162880] [drm] ib test on ring 3 succeeded in 0 usecs
[ 8.168632] ahci 0000:00:0b.0: version 3.0
[ 8.169043] ACPI: PCI Interrupt Link [LSI0] enabled at IRQ 23
[ 8.170020] ahci 0000:00:0b.0: irq 45 for MSI/MSI-X
[ 8.170036] ahci 0000:00:0b.0: controller can't do PMP, turning off CAP_PMP
[ 8.170104] ahci 0000:00:0b.0: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3 impl IDE mode
[ 8.170107] ahci 0000:00:0b.0: flags: 64bit ncq sntf pm led pio slum part boh
[ 8.170957] scsi0 : ahci
[ 8.171028] scsi1 : ahci
[ 8.171081] scsi2 : ahci
[ 8.171130] scsi3 : ahci
[ 8.171180] scsi4 : ahci
[ 8.171235] scsi5 : ahci
[ 8.171268] ata1: SATA max UDMA/133 abar m8192@0xd0484000 port 0xd0484100 irq 45
[ 8.171270] ata2: SATA max UDMA/133 abar m8192@0xd0484000 port 0xd0484180 irq 45
[ 8.171271] ata3: DUMMY
[ 8.171272] ata4: DUMMY
[ 8.171273] ata5: DUMMY
[ 8.171274] ata6: DUMMY
[ 8.192095] [drm] radeon atom DIG backlight initialized
[ 8.192099] [drm] Radeon Display Connectors
[ 8.192101] [drm] Connector 0:
[ 8.192103] [drm] DP-1
[ 8.192105] [drm] HPD2
[ 8.192108] [drm] DDC: 0x7e60 0x7e60 0x7e64 0x7e64 0x7e68 0x7e68 0x7e6c 0x7e6c
[ 8.192110] [drm] Encoders:
[ 8.192112] [drm] DFP1: INTERNAL_UNIPHY
[ 8.192114] [drm] Connector 1:
[ 8.192116] [drm] DP-2
[ 8.192117] [drm] HPD3
[ 8.192120] [drm] DDC: 0x7e20 0x7e20 0x7e24 0x7e24 0x7e28 0x7e28 0x7e2c 0x7e2c
[ 8.192122] [drm] Encoders:
[ 8.192123] [drm] DFP2: INTERNAL_UNIPHY
[ 8.192125] [drm] Connector 2:
[ 8.192127] [drm] LVDS-1
[ 8.192129] [drm] Encoders:
[ 8.192130] [drm] LCD1: INTERNAL_KLDSCP_LVTMA
[ 8.192132] [drm] Connector 3:
[ 8.192134] [drm] VGA-1
[ 8.192137] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[ 8.192138] [drm] Encoders:
[ 8.192140] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 8.192279] [drm] Special thermal controller config
[ 8.192290] [drm] radeon: power management initialized
[ 8.220198] ssb: Sonics Silicon Backplane found on PCI device 0000:03:00.0
[ 8.276286] usb 1-4: Duplicate descriptor for config 1 interface 1 altsetting 5, skipping
[ 8.276291] usb 1-4: config 1 interface 1 has no altsetting 1
[ 8.277975] usb 1-4: New USB device found, idVendor=05ac, idProduct=8502
[ 8.277979] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 8.277982] usb 1-4: Product: Built-in iSight
[ 8.277985] usb 1-4: Manufacturer: Apple Inc.
[ 8.277988] usb 1-4: SerialNumber: 8J94412442CX3E00
[ 8.488109] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 8.489125] ata1.00: ATA-8: Hitachi HDT721064SLA360, ST0KA36A, max UDMA/133
[ 8.489129] ata1.00: 1250263728 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 8.490389] ata1.00: configured for UDMA/133
[ 8.490581] scsi 0:0:0:0: Direct-Access ATA Hitachi HDT72106 ST0K PQ: 0 ANSI: 5
[ 8.490699] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 8.490783] sd 0:0:0:0: [sda] 1250263728 512-byte logical blocks: (640 GB/596 GiB)
[ 8.490898] sd 0:0:0:0: [sda] Write Protect is off
[ 8.490901] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 8.490948] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 8.492063] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 8.496523] ata2.00: ATAPI: HL-DT-ST DVDRW GA11N, KA16, max UDMA/133
[ 8.502177] ata2.00: configured for UDMA/133
[ 8.508246] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRW GA11N KA16 PQ: 0 ANSI: 5
[ 8.512429] sr0: scsi3-mmc drive: 31x/31x writer cd/rw xa/form2 cdda caddy
[ 8.512432] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 8.512534] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 8.512578] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 8.555847] sda: sda1 sda2 sda3 sda4
[ 8.556239] sd 0:0:0:0: [sda] Attached SCSI disk
[ 8.644196] firewire_core 0000:04:00.0: created device fw0: GUID 002500fffea59842, S800
[ 8.704105] usb 2-4: new high-speed USB device number 3 using ehci-pci
[ 8.844637] usb 2-4: New USB device found, idVendor=05ac, idProduct=1006
[ 8.844641] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 8.844645] usb 2-4: Product: Keyboard Hub
[ 8.844648] usb 2-4: Manufacturer: Apple, Inc.
[ 8.844651] usb 2-4: SerialNumber: 000000000000
[ 8.844900] hub 2-4:1.0: USB hub found
[ 8.845009] hub 2-4:1.0: 3 ports detected
[ 8.887236] [drm] fb mappable at 0xC0241000
[ 8.887238] [drm] vram apper at 0xC0000000
[ 8.887239] [drm] size 9216000
[ 8.887240] [drm] fb depth is 24
[ 8.887241] [drm] pitch is 7680
[ 8.887305] fbcon: radeondrmfb (fb0) is primary device
[ 8.937101] Console: switching to colour frame buffer device 240x75
[ 8.942022] radeon 0000:02:00.0: fb0: radeondrmfb frame buffer device
[ 8.942024] radeon 0000:02:00.0: registered panic notifier
[ 8.942033] [drm] Initialized radeon 2.36.0 20080528 for 0000:02:00.0 on minor 0
[ 9.148130] usb 4-1: new full-speed USB device number 2 using ohci-pci
[ 9.370182] usb 4-1: New USB device found, idVendor=0a5c, idProduct=4500
[ 9.370187] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 9.370191] usb 4-1: Product: BRCM2046 Hub
[ 9.370194] usb 4-1: Manufacturer: Apple Inc.
[ 9.373223] hub 4-1:1.0: USB hub found
[ 9.376193] hub 4-1:1.0: 3 ports detected
[ 9.820112] usb 3-5: new low-speed USB device number 2 using ohci-pci
[ 10.035180] usb 3-5: New USB device found, idVendor=05ac, idProduct=8242
[ 10.035184] usb 3-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 10.035188] usb 3-5: Product: IR Receiver
[ 10.035191] usb 3-5: Manufacturer: Apple Computer, Inc.
[ 10.044975] hidraw: raw HID events driver (C) Jiri Kosina
[ 10.052155] usbcore: registered new interface driver usbhid
[ 10.052156] usbhid: USB HID core driver
[ 10.112160] usb 2-4.2: new low-speed USB device number 4 using ehci-pci
[ 10.211410] usb 2-4.2: New USB device found, idVendor=05ac, idProduct=0221
[ 10.211414] usb 2-4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 10.211418] usb 2-4.2: Product: Apple Keyboard
[ 10.211421] usb 2-4.2: Manufacturer: Apple, Inc
[ 10.219118] input: Apple, Inc Apple Keyboard as /devices/pci0000:00/0000:00:06.1/usb2/2-4/2-4.2/2-4.2:1.0/input/input3
[ 10.219184] apple 0003:05AC:0221.0002: input,hidraw0: USB HID v1.11 Keyboard [Apple, Inc Apple Keyboard] on usb-0000:00:06.1-4.2/input0
[ 10.219906] input: Apple, Inc Apple Keyboard as /devices/pci0000:00/0000:00:06.1/usb2/2-4/2-4.2/2-4.2:1.1/input/input4
[ 10.219967] apple 0003:05AC:0221.0003: input,hidraw1: USB HID v1.11 Device [Apple, Inc Apple Keyboard] on usb-0000:00:06.1-4.2/input1
[ 10.288162] usb 2-4.3: new low-speed USB device number 5 using ehci-pci
[ 10.386637] usb 2-4.3: New USB device found, idVendor=05ac, idProduct=0304
[ 10.386642] usb 2-4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 10.386645] usb 2-4.3: Product: Apple Optical USB Mouse
[ 10.386648] usb 2-4.3: Manufacturer: Mitsumi Electric
[ 10.389628] input: Mitsumi Electric Apple Optical USB Mouse as /devices/pci0000:00/0000:00:06.1/usb2/2-4/2-4.3/2-4.3:1.0/input/input5
[ 10.389708] apple 0003:05AC:0304.0004: input,hidraw2: USB HID v1.10 Mouse [Mitsumi Electric Apple Optical USB Mouse] on usb-0000:00:06.1-4.3/input0
[ 10.466183] usb 4-1.1: new full-speed USB device number 3 using ohci-pci
[ 10.588182] usb 4-1.1: New USB device found, idVendor=05ac, idProduct=8215
[ 10.588187] usb 4-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 10.588190] usb 4-1.1: Product: Bluetooth USB Host Controller
[ 10.588193] usb 4-1.1: Manufacturer: Apple Inc.
[ 10.588196] usb 4-1.1: SerialNumber: 002500C0F736
[ 10.665180] usb 4-1.2: new full-speed USB device number 4 using ohci-pci
[ 10.776183] usb 4-1.2: New USB device found, idVendor=05ac, idProduct=820a
[ 10.776188] usb 4-1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 10.788074] input: HID 05ac:820a as /devices/pci0000:00/0000:00:06.0/usb4/4-1/4-1.2/4-1.2:1.0/input/input6
[ 10.788130] hid-generic 0003:05AC:820A.0005: input,hidraw3: USB HID v1.11 Keyboard [HID 05ac:820a] on usb-0000:00:06.0-1.2/input0
[ 10.861178] usb 4-1.3: new full-speed USB device number 5 using ohci-pci
[ 10.972182] usb 4-1.3: New USB device found, idVendor=05ac, idProduct=820b
[ 10.972187] usb 4-1.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 10.982514] input: HID 05ac:820b as /devices/pci0000:00/0000:00:06.0/usb4/4-1/4-1.3/4-1.3:1.0/input/input7
[ 10.982589] hid-generic 0003:05AC:820B.0006: input,hidraw4: USB HID v1.11 Mouse [HID 05ac:820b] on usb-0000:00:06.0-1.3/input0
[ 11.867826] random: nonblocking pool is initialized
[ 16.829248] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 16.832917] ISO 9660 Extensions: RRIP_1991A
[ 19.402642] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 95.404256] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 98.480471] systemd-udevd[1054]: starting version 204
[ 107.782107] lp: driver loaded but no devices found
[ 108.557147] ppdev: user-space parallel port driver
[ 111.968587] init: cups main process (1100) killed by HUP signal
[ 111.968600] init: cups main process ended, respawning
[ 111.975115] Bluetooth: Core ver 2.17
[ 111.975128] NET: Registered protocol family 31
[ 111.975129] Bluetooth: HCI device and connection manager initialized
[ 111.975137] Bluetooth: HCI socket layer initialized
[ 111.975139] Bluetooth: L2CAP socket layer initialized
[ 111.975142] Bluetooth: SCO socket layer initialized
[ 113.413518] Bluetooth: RFCOMM TTY layer initialized
[ 113.413530] Bluetooth: RFCOMM socket layer initialized
[ 113.413534] Bluetooth: RFCOMM ver 1.11
[ 113.875800] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 113.875803] Bluetooth: BNEP filters: protocol multicast
[ 113.875812] Bluetooth: BNEP socket layer initialized
[ 114.143675] i2c i2c-7: nForce2 SMBus adapter at 0x2140
[ 114.143719] i2c i2c-8: nForce2 SMBus adapter at 0x2100
[ 119.341861] device-mapper: multipath: version 1.6.0 loaded
[ 122.364816] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 22
[ 122.364826] hda_intel: Disabling MSI
[ 122.364850] hda-intel 0000:00:08.0: Disabling 64bit DMA
[ 122.369265] hda-intel 0000:00:08.0: Enable delay in RIRB handling
[ 122.537244] cfg80211: Calling CRDA to update world regulatory domain
[ 122.548169] input: Apple Computer, Inc. IR Receiver as /devices/pci0000:00/0000:00:04.0/usb3/3-5/3-5:1.0/input/input8
[ 122.548267] appleir 0003:05AC:8242.0001: input,hiddev0,hidraw5: USB HID v1.11 Device [Apple Computer, Inc. IR Receiver] on usb-0000:00:04.0-5/input0
[ 123.624345] usbcore: registered new interface driver btusb
[ 123.641112] usb 4-1.2: USB disconnect, device number 4
[ 123.788302] hda_codec: ALC889A: SKU not ready 0x400000f0
[ 123.800111] usb 4-1.3: USB disconnect, device number 5
[ 123.844020] autoconfig: line_outs=2 (0x1a/0x18/0x0/0x0/0x0) type:speaker
[ 123.844023] speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 123.844025] hp_outs=1 (0x14/0x0/0x0/0x0/0x0)
[ 123.844026] mono: mono_out=0x0
[ 123.844027] dig-out=0x1e/0x0
[ 123.844028] inputs:
[ 123.844029] Mic=0x19
[ 123.844030] Line=0x15
[ 123.844031] dig-in=0x1f
[ 123.844033] realtek: No valid SSID, checking pincfg 0x400000f0 for NID 0x1d
[ 123.844034] realtek: Enable default setup for auto mode as fallback
[ 124.645737] Linux video capture interface: v2.00
[ 125.527345] init: failsafe main process (1316) killed by TERM signal
[ 125.579476] input: HDA NVidia Headphone as /devices/pci0000:00/0000:00:08.0/sound/card0/input10
[ 125.582542] input: HDA NVidia Line as /devices/pci0000:00/0000:00:08.0/sound/card0/input9
[ 125.635895] ACPI: PCI Interrupt Link [Z004] enabled at IRQ 21
[ 125.635914] hda-intel 0000:02:00.1: Handle VGA-switcheroo audio client
[ 125.635915] hda-intel 0000:02:00.1: Using LPIB position fix
[ 125.635959] snd_hda_intel 0000:02:00.1: irq 46 for MSI/MSI-X
[ 125.649835] hda-intel 0000:02:00.1: Enable sync_write for stable communication
[ 125.685886] applesmc: key=241 fan=3 temp=15 index=15 acc=0 lux=2 kbd=0
[ 126.589401] HDMI ATI/AMD: no speaker allocation for ELD
[ 126.589455] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:0c.0/0000:02:00.1/sound/card1/input11
[ 127.755350] cfg80211: World regulatory domain updated:
[ 127.755354] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 127.755356] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 127.755358] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 127.755359] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 127.755361] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 127.755362] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 127.908347] uvcvideo: Found UVC 1.00 device Built-in iSight (05ac:8502)
[ 127.913856] input: Built-in iSight as /devices/pci0000:00/0000:00:04.1/usb1/1-4/1-4:1.0/input/input12
[ 127.913952] usbcore: registered new interface driver uvcvideo
[ 127.913953] USB Video Class driver (1.1.1)
[ 129.566189] b43-phy0: Broadcom 4322 WLAN found (core revision 16)
[ 129.608044] b43-phy0: Found PHY: Analog 8, Type 4 (N), Revision 4
[ 129.632482] b43 ssb0:0: Direct firmware load failed with error -2
[ 129.632485] b43 ssb0:0: Falling back to user helper
[ 129.632529] Broadcom 43xx driver loaded [ Features: PNL ]
[ 129.633372] b43 ssb0:0: Direct firmware load failed with error -2
[ 129.633375] b43 ssb0:0: Falling back to user helper
[ 129.634217] b43 ssb0:0: Direct firmware load failed with error -2
[ 129.634220] b43 ssb0:0: Falling back to user helper
[ 129.634711] b43 ssb0:0: Direct firmware load failed with error -2
[ 129.634713] b43 ssb0:0: Falling back to user helper
[ 129.635388] b43-phy0 ERROR: Firmware file "b43/ucode16_mimo.fw" not found
[ 129.635391] b43-phy0 ERROR: Firmware file "b43-open/ucode16_mimo.fw" not found
[ 129.635393] b43-phy0 ERROR: You must go to http://wireless.kernel.org/en/users/Drivers/b43#devicefirmware and download the correct firmware for this driver version. Please carefully read all instructions on this website.
[ 153.454844] init: alsa-restore main process (1570) terminated with status 99
[ 159.859881] forcedeth 0000:00:0a.0: irq 47 for MSI/MSI-X
[ 159.859908] forcedeth 0000:00:0a.0 eth0: MSI enabled
[ 180.483909] init: plymouth-upstart-bridge main process ended, respawning
[ 180.498245] init: plymouth-upstart-bridge main process ended, respawning
[ 862.456063] usb 1-3: new high-speed USB device number 4 using ehci-pci
[ 862.591595] usb 1-3: New USB device found, idVendor=1bcf, idProduct=0c31
[ 862.591601] usb 1-3: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[ 862.591604] usb 1-3: Product: USB to Serial-ATA bridge
[ 862.591608] usb 1-3: Manufacturer: Sunplus Innovation Technology.
[ 862.591611] usb 1-3: SerialNumber: FAFFFFF0FDF13FF1BF901305
[ 864.683460] usb-storage 1-3:1.0: USB Mass Storage device detected
[ 864.683638] scsi6 : usb-storage 1-3:1.0
[ 864.683708] usbcore: registered new interface driver usb-storage
[ 865.690235] scsi 6:0:0:0: Direct-Access SAMSUNG HD103UJ PQ: 0 ANSI: 4
[ 865.690464] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 865.694619] sd 6:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 865.700970] sd 6:0:0:0: [sdb] Write Protect is off
[ 865.700973] sd 6:0:0:0: [sdb] Mode Sense: 38 00 00 00
[ 865.707350] sd 6:0:0:0: [sdb] No Caching mode page found
[ 865.707352] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 865.721592] sd 6:0:0:0: [sdb] No Caching mode page found
[ 865.721595] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 865.741343] sdb: sdb1 < > sdb2
[ 865.780852] sd 6:0:0:0: [sdb] No Caching mode page found
[ 865.780855] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 865.780857] sd 6:0:0:0: [sdb] Attached SCSI disk
[ 869.594066] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[ 869.609228] XFS (sdb2): Mounting Filesystem
[ 869.687220] XFS (sdb2): Internal error xlog_clear_stale_blocks(2) at line 1368 of file /build/buildd/linux-3.13.0/fs/xfs/xfs_log_recover.c. Caller 0xffffffffa07a8951
[ 869.687226] CPU: 1 PID: 5635 Comm: mount Not tainted 3.13.0-32-generic #57-Ubuntu
[ 869.687227] Hardware name: Apple Inc. iMac9,1/Mac-F2218FA9, BIOS IM91.88Z.008D.B08.0904271717 04/27/09
[ 869.687229] 00000000000045e1 ffff88021f8f5c38 ffffffff8171bcb4 ffff88020c7c7400
[ 869.687232] ffff88021f8f5c50 ffffffffa075753b ffffffffa07a8951 ffff88021f8f5c90
[ 869.687234] ffffffffa07a5cf3 ffffffffa07a538f ffff88020c7c7400 ffff880219400780
[ 869.687236] Call Trace:
[ 869.687243] [<ffffffff8171bcb4>] dump_stack+0x45/0x56
[ 869.687269] [<ffffffffa075753b>] xfs_error_report+0x3b/0x40 [xfs]
[ 869.687287] [<ffffffffa07a8951>] ? xlog_find_tail+0x341/0x3d0 [xfs]
[ 869.687302] [<ffffffffa07a5cf3>] xlog_clear_stale_blocks+0x183/0x1c0 [xfs]
[ 869.687318] [<ffffffffa07a538f>] ? xlog_bread+0x3f/0x50 [xfs]
[ 869.687334] [<ffffffffa07a8951>] xlog_find_tail+0x341/0x3d0 [xfs]
[ 869.687350] [<ffffffffa07aa2be>] xlog_recover+0x1e/0xc0 [xfs]
[ 869.687367] [<ffffffffa07ae8ac>] xfs_log_mount+0x1bc/0x260 [xfs]
[ 869.687380] [<ffffffffa0766cca>] xfs_mountfs+0x3aa/0x700 [xfs]
[ 869.687392] [<ffffffffa076a142>] xfs_fs_fill_super+0x2b2/0x330 [xfs]
[ 869.687396] [<ffffffff811c0030>] mount_bdev+0x1b0/0x1f0
[ 869.687409] [<ffffffffa0769e90>] ? xfs_parseargs+0xbd0/0xbd0 [xfs]
[ 869.687422] [<ffffffffa0768185>] xfs_fs_mount+0x15/0x20 [xfs]
[ 869.687425] [<ffffffff811c0a29>] mount_fs+0x39/0x1b0
[ 869.687428] [<ffffffff8116f260>] ? __alloc_percpu+0x10/0x20
[ 869.687431] [<ffffffff811dbcd7>] vfs_kern_mount+0x67/0x110
[ 869.687433] [<ffffffff811de4ee>] do_mount+0x23e/0xad0
[ 869.687435] [<ffffffff8116a28b>] ? strndup_user+0x4b/0xf0
[ 869.687437] [<ffffffff811df073>] SyS_mount+0x83/0xc0
[ 869.687440] [<ffffffff8172c87f>] tracesys+0xe1/0xe6
[ 869.687442] XFS (sdb2): failed to locate log tail
[ 869.687444] XFS (sdb2): log mount/recovery failed: error 117
[ 869.687486] XFS (sdb2): log mount failed
[ 1404.460745] sd 6:0:0:0: [sdb] Unhandled sense code
[ 1404.460751] sd 6:0:0:0: [sdb]
[ 1404.460753] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 1404.460756] sd 6:0:0:0: [sdb]
[ 1404.460758] Sense Key : Medium Error [current]
[ 1404.460763] sd 6:0:0:0: [sdb]
[ 1404.460766] Add. Sense: Unrecovered read error
[ 1404.460769] sd 6:0:0:0: [sdb] CDB:
[ 1404.460771] Read(10): 28 00 07 63 bf 8d 00 00 eb 00
[ 1404.460781] end_request: critical medium error, dev sdb, sector 123977613
[ 1489.507727] sd 6:0:0:0: [sdb] Unhandled sense code
[ 1489.507734] sd 6:0:0:0: [sdb]
[ 1489.507736] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 1489.507739] sd 6:0:0:0: [sdb]
[ 1489.507741] Sense Key : Medium Error [current]
[ 1489.507746] sd 6:0:0:0: [sdb]
[ 1489.507749] Add. Sense: Unrecovered read error
[ 1489.507752] sd 6:0:0:0: [sdb] CDB:
[ 1489.507754] Read(10): 28 00 07 63 bf 8d 00 00 eb 00
[ 1489.507769] end_request: critical medium error, dev sdb, sector 123977613
root@ubuntu:~#
"Input/Output Error" . Run the "dmesg" command immediately after
this error, and see what it reports last (end of command output).
> > This asks you to post the contents of /proc/partitions, which is
> > what the kernel thinks are the partition sizes.
>
> How do I do this?
cat /proc/partitions
root@ubuntu:~# cat /proc/partitions
major minor #blocks name
7 0 961232 loop0
8 0 625131864 sda
8 1 204800 sda1
8 2 515624992 sda2
8 3 634772 sda3
8 4 108666880 sda4
11 0 1004544 sr0
8 16 976762584 sdb
8 17 1 sdb1
8 18 975755970 sdb2
root@ubuntu:~#
Hi Emmanuel, so that should be what you asked for? I did a reset in terminal and tried the dmesg, so I hope this didn't wipe any data on the failed mount which I had completed before. I'm about to try mouning as read only - fingers crossed!
Cheers,
Tom
> > > Yes it's a NAS drive and so I assume had some kind of proprietary
> > > OS on the other partitions (this is where i might have messed up
> > > by deleting?!) I'm pretty sure that the drive in bold below (sdc2)
> > > is the one I'm after which is xfs...
> >
> > Ummm, exactly what are you trying to do with this drive/filesystem?
> > What device did the drive come from in the first place?
>
> It's a lacie 'Neil poulton' network space1 1tb NAS drive (see first
> paragraph of post) - it recently stopped working and was stuck in a
> 'spin cycle' - it contains my music and video backups. I'm trying to
> recover the files...
Most probably disk is badly damaged, dead or dying. It's advisable to
try to create an image of the disk on another one, and work for this
image, because this disk will probably die any time now. It's no use
trying to repair a filesystem on a bad drive, which is the cause of the
errors from the beginning.
If all you care is to get your files back, just try to mount the volume
in read-only, non-recovery mode :
mount -o ro,norecovery /dev/sdc2 /tmp/mount
Then proceed by copying whatever you can get. Consider that any file
that gives an error is lost.
The other option is Kroll Ontrack or similar services, of course.
--
------------------------------------------------------------------------
Emmanuel Florac | Direction technique
| Intellique
| <eflorac@xxxxxxxxxxxxxx >
| +33 1 78 94 84 02
------------------------------------------------------------------------
_______________________________________________ xfs mailing list xfs@xxxxxxxxxxx http://oss.sgi.com/mailman/listinfo/xfs
