The zero range operation is analogous to fallocate with the exception of converting the range to zeroes. E.g., it attempts to allocate zeroed blocks over the range specified by the caller. The XFS implementation kills all delalloc blocks currently over the aligned range, converts the range to allocated zero blocks (unwritten extents) and handles the partial pages at the ends of the range by sending writes through the pagecache. The current implementation suffers from several problems associated with inode size. If the aligned range covers an extending I/O, said I/O is discarded and an inode size update from a previous write never makes it to disk. Further, if an unaligned zero range extends beyond eof, the page write induced for the partial end page can itself increase the inode size, even if the zero range request is not supposed to update i_size (via KEEP_SIZE, similar to an fallocate beyond EOF). The latter behavior not only incorrectly increases the inode size, but can lead to stray delalloc blocks on the inode. Typically, post-eof preallocation blocks are either truncated on release or inode eviction or explicitly written to by xfs_zero_eof() on natural file size extension. If the inode size increases due to zero range, however, associated blocks leak into the address space having never been converted or mapped to pagecache pages. A direct I/O to such an uncovered range cannot convert the extent via writeback and will BUG(). For example: $ xfs_io -fc "pwrite 0 128k" -c "fzero -k 1m 54321" <file> ... $ xfs_io -d -c "pread 128k 128k" <file> <BUG> If the entire delalloc extent happens to not have page coverage whatsoever (e.g., delalloc conversion couldn't find a large enough free space extent), even a full file writeback won't convert what's left of the extent and we'll assert on inode eviction. Rework xfs_zero_file_space() to avoid buffered I/O for partial pages. Align to blocksize rather than page size and use uncached buffers to zero partial blocks. Preallocate the outward block-aligned range to provide fallocate allocation semantics and convert the inward range to unwritten extents to zero the range. Signed-off-by: Brian Foster <bfoster@xxxxxxxxxx> --- v2: - Refactor the logic to punch out pagecache/delalloc first and do allocation last to prevent stray delalloc on ENOSPC. v1: http://oss.sgi.com/archives/xfs/2014-10/msg00052.html fs/xfs/xfs_bmap_util.c | 112 +++++++++++++++++++++++++++++++------------------ 1 file changed, 72 insertions(+), 40 deletions(-) diff --git a/fs/xfs/xfs_bmap_util.c b/fs/xfs/xfs_bmap_util.c index 92e8f99..d295f9b 100644 --- a/fs/xfs/xfs_bmap_util.c +++ b/fs/xfs/xfs_bmap_util.c @@ -1338,7 +1338,14 @@ xfs_free_file_space( goto out; } - +/* + * Preallocate and zero a range of a file. This mechanism has the allocation + * semantics of fallocate and in addition converts data in the range to zeroes. + * This is done using unwritten extent conversion for complete blocks within the + * range. Partial start/end blocks cannot be converted to unwritten as they + * contain valid data. Therefore, partial blocks are preallocated and explicitly + * zeroed on-disk. + */ int xfs_zero_file_space( struct xfs_inode *ip, @@ -1346,64 +1353,89 @@ xfs_zero_file_space( xfs_off_t len) { struct xfs_mount *mp = ip->i_mount; - uint granularity; + uint blksize; xfs_off_t start_boundary; xfs_off_t end_boundary; int error; + loff_t eof; + xfs_off_t endoffset; trace_xfs_zero_file_space(ip); - granularity = max_t(uint, 1 << mp->m_sb.sb_blocklog, PAGE_CACHE_SIZE); + blksize = 1 << mp->m_sb.sb_blocklog; /* - * Round the range of extents we are going to convert inwards. If the - * offset is aligned, then it doesn't get changed so we zero from the - * start of the block offset points to. + * Align the range inward to blocksize. This represents the range that + * can be converted to unwritten extents. */ - start_boundary = round_up(offset, granularity); - end_boundary = round_down(offset + len, granularity); + start_boundary = round_up(offset, blksize); + end_boundary = round_down(offset + len, blksize); ASSERT(start_boundary >= offset); ASSERT(end_boundary <= offset + len); - if (start_boundary < end_boundary - 1) { - /* - * Writeback the range to ensure any inode size updates due to - * appending writes make it to disk (otherwise we could just - * punch out the delalloc blocks). - */ - error = filemap_write_and_wait_range(VFS_I(ip)->i_mapping, - start_boundary, end_boundary - 1); + /* + * We generally want to avoid writeback here but must take a few things + * into consideration. If the eof page falls within the aligned range, + * write it back so we don't lose i_size updates. Also writeback + * unaligned start/end pages to avoid races with uncached I/O. + */ + eof = round_down(i_size_read(VFS_I(ip)) - 1, PAGE_CACHE_SIZE); + if (eof >= start_boundary && eof <= end_boundary) + filemap_write_and_wait_range(VFS_I(ip)->i_mapping, eof, -1); + if (!PAGE_ALIGNED(offset) || !PAGE_ALIGNED(offset + len)) { + filemap_write_and_wait_range(VFS_I(ip)->i_mapping, offset, + start_boundary); + filemap_write_and_wait_range(VFS_I(ip)->i_mapping, end_boundary, + offset + len); + } + + /* + * Punch out the pagecache and delalloc extents in the range. + * truncate_pagecache_range() handles partial page zeroing for us. + */ + truncate_pagecache_range(VFS_I(ip), offset, offset + len - 1); + if (end_boundary > start_boundary) { + xfs_ilock(ip, XFS_ILOCK_EXCL); + error = xfs_bmap_punch_delalloc_range(ip, + XFS_B_TO_FSBT(mp, start_boundary), + XFS_B_TO_FSB(mp, + end_boundary - start_boundary)); + xfs_iunlock(ip, XFS_ILOCK_EXCL); + } + + /* + * Now handle start and end sub-block zeroing. We do this before + * allocation because we want the blocks on disk consistent with + * pagecache if we hit ENOSPC. + */ + if (offset < start_boundary) { + /* don't go past the end offset if it's within the block */ + endoffset = min_t(xfs_off_t, start_boundary, offset + len); + + error = xfs_zero_remaining_bytes(ip, offset, endoffset - 1); if (error) goto out; - truncate_pagecache_range(VFS_I(ip), start_boundary, - end_boundary - 1); + } + if (end_boundary >= start_boundary && offset + len > end_boundary) { + error = xfs_zero_remaining_bytes(ip, end_boundary, + offset + len - 1); + if (error) + goto out; + } - /* convert the blocks */ + /* + * Finally, preallocate the unaligned range and convert the block + * aligned range to unwritten. We attempt extent conversion even if + * prealloc fails to convert as many existing extents as possible. + */ + error = xfs_alloc_file_space(ip, round_down(offset, blksize), + round_up(offset + len, blksize) - 1, + XFS_BMAPI_PREALLOC); + if (end_boundary > start_boundary) error = xfs_alloc_file_space(ip, start_boundary, end_boundary - start_boundary - 1, XFS_BMAPI_PREALLOC | XFS_BMAPI_CONVERT); - if (error) - goto out; - - /* We've handled the interior of the range, now for the edges */ - if (start_boundary != offset) { - error = xfs_iozero(ip, offset, start_boundary - offset); - if (error) - goto out; - } - - if (end_boundary != offset + len) - error = xfs_iozero(ip, end_boundary, - offset + len - end_boundary); - - } else { - /* - * It's either a sub-granularity range or the range spanned lies - * partially across two adjacent blocks. - */ - error = xfs_iozero(ip, offset, len); - } out: return error; -- 1.8.3.1 _______________________________________________ xfs mailing list xfs@xxxxxxxxxxx http://oss.sgi.com/mailman/listinfo/xfs
