Re: [RFD] xfs_fsr: Doubts related to xfs_fsr code

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 9/13/14 12:07 PM, Somdeep Dey wrote:
> Hi,
> 
> While studying the code and attempting to understand it, we have come up against certain doubts that have us in a slight fix. We've included the concerned
>  sections of the code below, along with our specific problem in each of these 
>  sections. A little pointer in the right direction would be of great help.
> 
> (Source file : fsr_xfs_fsr.c)

If possible, please send mails - especially those containing code - 
in plaintext, not HTML, so it doeesn't get mangled.

> ****** Doubt number 1 ******
> (line 331 onwards)

(re-pasted to avoid html mangling)

                for (; optind < argc; optind++) {
                        argname = argv[optind];

                        if (lstat64(argname, &sb) < 0) {
                                fprintf(stderr,
                                        _("%s: could not stat: %s: %s\n"),
                                        progname, argname, strerror(errno));
                                continue;
                        }

                        if (S_ISLNK(sb.st_mode)) {
                                struct stat64 sb2;

                                if (stat64(argname, &sb2) == 0 &&
                                    (S_ISBLK(sb2.st_mode) ||
                                     S_ISCHR(sb2.st_mode)))
                                sb = sb2;
                        }

                        mntp = find_mountpoint(mtab, argname, &sb);

> ________________________________________________________________________________
> 
> We understand that lstat64() and stat64() are used to see if target
>  (file/filesystem) can be stated and if yes then the structure is saved. 
> But we couldn’t exactly understand its use and why both functions are used separately.
> Usually the error could not stat: filename : is followed by Permission denied.
>  Is this related to the root permissions i.e. accessibility ?

The code has the net effect of only using the stat information of a link
target if that target is a block or character device.  I don't know for sure
why that is, but I presume that it has to do with the find_mountpoint() code,
and symlinks in /dev vs. what is found in /proc/mounts.

The manpage mentions this behavior as well:

  A command line name referring to a symbolic link (except to a file system
  device), FIFO, or UNIX domain socket generates a warning message, but is
  otherwise ignored. While traversing the filesystem these types of files are
  silently skipped.

> ****** Doubt number 2 ******
> 
> (line 184 onwards)

        while ((t = getmntent(mtabp))) {
                if (S_ISDIR(sb->st_mode)) {             /* mount point */
                        if (stat64(t->mnt_dir, &ms) < 0)
                                continue;
                        if (sb->st_ino != ms.st_ino)
                                continue;
                        if (sb->st_dev != ms.st_dev)
                                continue;
                        if (strcmp(t->mnt_type, MNTTYPE_XFS) != 0)
                                continue;
                } else {                                /* device */
                        struct stat64 sb2;

                        if (stat64(t->mnt_fsname, &ms) < 0)
                                continue;
                        if (sb->st_rdev != ms.st_rdev)
                                continue;
                        if (strcmp(t->mnt_type, MNTTYPE_XFS) != 0)
                                continue;

                        /*
                         * Make sure the mountpoint given by mtab is accessible
                         * before using it.
                         */
                        if (stat64(t->mnt_dir, &sb2) < 0)
                                continue;
> ________________________________________________________________________________
> We just wanted to confirm if the basic working of the function is
> 1) To obtain a mount table pointer to the mount table (/etc/mtab/ or /proc/mounts).
> 2)  For each entry in the mount table check if it is a directory or device and after
>  performing various comparisons (checks) – (could you please elaborate on the checks
>   performed), this function returns a pointer to the entry. 

We are looking to see if we have been given either a mounted xfs device, or an
xfs mount point.  We iterate over devices from getmntent to find out if there
is a match for a mounted filesystem.

If the cmdline argument was a directory, it might be a mountpoint, so we
check the getmntent entry's mnt_dir (mountpoint) to see if it:

	1) has the same inode number as our argument
	2) is the same device number as our argument (same st_dev)
	3) is of type XFS

If it isn't a directory, it might be a device, so we check the getmntent
entry's device by looking at it's mnt_fsname (device) to see if:

	1) is the same device number (same st_rdev)
	2) is of type XFS

> ****** Doubt number 3 ******
> 
> (line 677 onwards)
> static int
> fsrfs(char *mntdir, xfs_ino_t startino, int targetrange)
> 
> For the following 

        __s32   buflenout;
...

        fshandlep = jdm_getfshandle( mntdir );
        if ( ! fshandlep ) {
                fsrprintf(_("unable to get handle: %s: %s\n"),
                          mntdir, strerror( errno ));
                return -1;
        }

> ________________________________________________________________________________
> 
> We are a bit confused about what is exactly the file handle being returned
>  by jdm_getfshandle().
> Also what exactly is buflenout. Is it a structure field ?
> ________________________________________________________________________________


Let's be inquisitive people, and find out the answers to these questions by
reading the code and the existing documentation:

The fshandlep returned by jdm_getfshandle is passed through jdm_open() to
open_by_fshandle(), which calls the XFS_IOC_OPEN_BY_HANDLE interface, which
is well described in the open_by_handle(3) manpage.


buflenout is passed to xfs_bulkstat() as the *ocount argument, which assigns it
to an xfs_fsop_bulkreq_t structure's ocount member.  That structure is then
passed to the XFS_IOC_FSBULKSTAT which is documented in the xfsctl manpage:

  ocount is a pointer to a count of returned values, filled in by the call.
  An output ocount value of zero means that the inode table has been exhausted.

That manpage also explains what the XFS bulkstat interface does.

> ________________________________________________________________________________

        while ((ret = xfs_bulkstat(fsfd,
                                &lastino, GRABSZ, &buf[0], &buflenout) == 0)) {
                xfs_bstat_t *p;
                xfs_bstat_t *endp;

                if (buflenout == 0)
                        goto out0;

                /* Each loop through, defrag targetrange percent of the files */
                count = (buflenout * targetrange) / 100;

                qsort((char *)buf, buflenout, sizeof(struct xfs_bstat), cmp);

> In the above code snippet we understand that the while loop will run for N(10) 
> passes and defragment top 10% of the defragmented files.
> However we would appreciate if you could further explain the functions:
> 
> (ret = xfs_bulkstat(fsfd,&lastino, GRABSZ, &buf[0], &buflenout) == 0)

see the manpage mentioned above; it gets a batch (GRABSZ, or 64) of inodes
to look at.

> qsort((char *)buf, buflenout, sizeof(struct xfs_bstat), cmp);
> 
> We know that the sort function will be used to sort extents based on size and then 
> offset, but a bit more information on how it is exactly working will be really 
> appreciated, as we believe that this sort() has some other purpose.
> ________________________________________________________________________________

It has nothing to do with the extent *size*

qsort is passed cmp() which compares the number of extents, based on:

        __s32           bs_extents;     /* number of extents            */

and sorts based on that.  So it compares all of the entries returned
by xfs_bulkstat and sorts the buffer by the number of extents in the
entries, that's all.

> For this mail we have listed only a limited number of doubts that we
> think are pressing. Based on further explanations that we might
> receive from you, we will send out another mail for the doubts that
> still linger.

Please also do as much reading of code and the existing documentation as
you can, first. ;)

-Eric

> Regards,
> A-DRS.

_______________________________________________
xfs mailing list
xfs@xxxxxxxxxxx
http://oss.sgi.com/mailman/listinfo/xfs





[Index of Archives]     [Linux XFS Devel]     [Linux Filesystem Development]     [Filesystem Testing]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux