On Tue, Jul 15, 2014 at 04:20:29PM +0630, Chandan Rajendra wrote: > All the filesystems created and used below have 4k blocksize. The > "file.bin" file mentioned below is 8k in size and has two 4k > extents. The test program used can be found at http://fpaste.org/118057/. > > 1. First run (file range being passed is on block boundaries). > ,---- > | [root@guest0 btrfs]# for f in $(ls -1 /mnt/{btrfs,ext4,xfs}/file.bin) ; > | > do > | > echo "-------------- File: $f -----------"; > | > /root/print-fiemap 0 8192 $f; > | > done > | -------------- File: /mnt/btrfs/file.bin ----------- > | File range: 0 - 8191. > | Found 2 extents. > | Fiemap information: > | Logical: 0 > | Physical: 12582912 > | Length: 4096 > | Flags: > | > | Logical: 4096 > | Physical: 12656640 > | Length: 4096 > | Flags: FIEMAP_EXTENT_LAST | > | > | -------------- File: /mnt/ext4/file.bin ----------- > | File range: 0 - 8191. > | Found 2 extents. > | Fiemap information: > | Logical: 0 > | Physical: 135270400 > | Length: 4096 > | Flags: > | > | Logical: 4096 > | Physical: 135278592 > | Length: 4096 > | Flags: FIEMAP_EXTENT_LAST | > | > | -------------- File: /mnt/xfs/file.bin ----------- > | File range: 0 - 8191. > | Found 2 extents. > | Fiemap information: > | Logical: 0 > | Physical: 49152 > | Length: 4096 > | Flags: > | > | Logical: 4096 > | Physical: 57344 > | Length: 4096 > | Flags: FIEMAP_EXTENT_LAST | > `---- > > 2. If the file offset range being passed as input to fiemap ioctl is > not on block boundaries and falls within an extent's range then that > extent is skipped. > ,---- > | [root@guest0 btrfs]# for f in $(ls -1 /mnt/{btrfs,ext4,xfs}/file.bin) ; > | > do > | > echo "-------------- File: $f -----------"; > | > /root/print-fiemap 1 4095 $f; > | > done > | -------------- File: /mnt/btrfs/file.bin ----------- > | File range: 1 - 4095. > | Found 0 extents. > | > | > | -------------- File: /mnt/ext4/file.bin ----------- > | File range: 1 - 4095. > | Found 1 extents. > | Fiemap information: > | Logical: 0 > | Physical: 135270400 > | Length: 4096 > | Flags: > | > | -------------- File: /mnt/xfs/file.bin ----------- > | File range: 1 - 4095. > | Found 2 extents. > | Fiemap information: > | Logical: 0 > | Physical: 49152 > | Length: 4096 > | Flags: > | > | Logical: 4096 > | Physical: 57344 > | Length: 4096 > | Flags: FIEMAP_EXTENT_LAST | > `---- > > From linux/Documentation/filesystems/fiemap.txt, "fm_start, and > fm_length specify the logical range within the file which the > process would like mappings for. Extents returned mirror those on > disk - that is, the logical offset of the 1st returned extent may > start before fm_start, and the range covered by the last returned > extent may end after fm_length. All offsets and lengths are in > bytes." > > So IMHO, the above would mean that all the extents that map the > file range [fm_start, fm_start + fm_length - 1] should be returned > by a fiemap ioctl call (as done by ext4). > > In the case of Btrfs, the commit > ea8efc74bd0402b4d5f663d007b4e25fa29ea778 i.e. "Btrfs: make sure not > to return overlapping extents to fiemap", forces the first extent > returned by btrfs_fiemap() to start from fm_start (if fm_start is > greater than the file offset mapped by the containing extent's > first byte). Can somebody please list some example scenarios where > extent_fiemap() ends up returning dupclicate and overlapping > extents? > Also, the commit 4d479cf010d56ec9c54f3099992d039918f1296b > i.e. "Btrfs: sectorsize align offsets in fiemap", rounds up first > byte of the file offset range to the next block. Shouldn't it be > rounded down instead? > > XFS lists both the extents even though the first one encompasses the > file range specified in the input. > I gave this a test on XFS with a file that looks like this: # xfs_bmap -v /mnt/file /mnt/file: EXT: FILE-OFFSET BLOCK-RANGE AG AG-OFFSET TOTAL FLAGS 0: [0..15]: 102368..102383 1 (51168..51183) 16 10000 1: [16..63]: 1832..1879 0 (1832..1879) 48 10000 I narrowed the print_fiemap behavior down to this: # ./print_fiemap 1 7680 /mnt/file File range: 1 - 7680. Found 1 extents. Fiemap information: Logical: 0 Physical: 52412416 Length: 8192 Flags: FIEMAP_EXTENT_UNWRITTEN | # ./print_fiemap 1 7681 /mnt/file File range: 1 - 7681. Found 2 extents. Fiemap information: Logical: 0 Physical: 52412416 Length: 8192 Flags: FIEMAP_EXTENT_UNWRITTEN | Logical: 8192 Physical: 937984 Length: 4096 Flags: FIEMAP_EXTENT_LAST | FIEMAP_EXTENT_UNWRITTEN | ... which is caused by using the BTOBB() macro on the provided length value. This rounds the length up by a basic block (512 bytes). Switching this to use BTOBBT() fixes it for me. Patch below, care to test? Thanks. Brian ---8<--- diff --git a/fs/xfs/xfs_iops.c b/fs/xfs/xfs_iops.c index d75621a..d2fbc42 100644 --- a/fs/xfs/xfs_iops.c +++ b/fs/xfs/xfs_iops.c @@ -1060,7 +1060,7 @@ xfs_vn_fiemap( if (length == FIEMAP_MAX_OFFSET) bm.bmv_length = -1LL; else - bm.bmv_length = BTOBB(length); + bm.bmv_length = BTOBBT(length); /* We add one because in getbmap world count includes the header */ bm.bmv_count = !fieinfo->fi_extents_max ? MAXEXTNUM : > -- > chandan > > _______________________________________________ > xfs mailing list > xfs@xxxxxxxxxxx > http://oss.sgi.com/mailman/listinfo/xfs _______________________________________________ xfs mailing list xfs@xxxxxxxxxxx http://oss.sgi.com/mailman/listinfo/xfs
