On Fri, Jul 11, 2014 at 06:02:01PM -0500, Eric Sandeen wrote:
> Today, if we have a filesystem with stripe geometry and
> a damaged primary superblock, we will zero out stripe geometry
> if we have copied the backup.
>
> I'm guessing this might be because changing geometry with mount
> options only updates the primary, so backups aren't guaranteed
> to be current or correct.
>
> Unfortunately, that leaves us with sb 0 w/ no geom, and backups
> *with* geom, so the next repair finds the mismatch, and complains.
> (In other words, the 2nd repair does not come up clean.)_
> And ... the second repair copies the backup stripe geometry back
> into the primary!
>
> Rather than clearing stripe geometry in this case, just leave it
> at what was found in the backup super, and inform the user that this
> was done. This leaves a consistent filesystem, and gives the user
> a heads-up to double-check the result.
>
> This can all be demonstrated and tested by running xfs/030 with
> geometry set in MKFS_OPTIONS. (To really make the test pass,
> we need to filter the warning out of repair output.)
>
> Signed-off-by: Eric Sandeen <sandeen@xxxxxxxxxx>
> ---
Seems reasonable to me.
Reviewed-by: Brian Foster <bfoster@xxxxxxxxxx>
>
> diff --git a/repair/globals.h b/repair/globals.h
> index f6e0a22..6207ca1 100644
> --- a/repair/globals.h
> +++ b/repair/globals.h
> @@ -124,7 +124,7 @@ EXTERN int lazy_count; /* What to set if to if converting */
>
> EXTERN int primary_sb_modified;
> EXTERN int bad_ino_btree;
> -EXTERN int clear_sunit;
> +EXTERN int copied_sunit;
> EXTERN int fs_is_dirty;
>
> /* for hunting down the root inode */
> diff --git a/repair/sb.c b/repair/sb.c
> index bc421cc..ad27756 100644
> --- a/repair/sb.c
> +++ b/repair/sb.c
> @@ -151,7 +151,7 @@ find_secondary_sb(xfs_sb_t *rsb)
> */
> memmove(rsb, &bufsb, sizeof(xfs_sb_t));
> rsb->sb_inprogress = 0;
> - clear_sunit = 1;
> + copied_sunit = 1;
>
> if (verify_set_primary_sb(rsb, 0, &dirty) == XR_OK) {
> do_warn(
> diff --git a/repair/xfs_repair.c b/repair/xfs_repair.c
> index 9eb2fa4..834697a 100644
> --- a/repair/xfs_repair.c
> +++ b/repair/xfs_repair.c
> @@ -193,7 +193,7 @@ process_args(int argc, char **argv)
> delete_attr_ok = 1;
> force_geo = 0;
> assume_xfs = 0;
> - clear_sunit = 0;
> + copied_sunit = 0;
> sb_inoalignmt = 0;
> sb_unit = 0;
> sb_width = 0;
> @@ -898,13 +898,11 @@ _("Warning: project quota information would be cleared.\n"
> dsb->sb_qflags &= cpu_to_be16(~XFS_ALL_QUOTA_CHKD);
> }
>
> - if (clear_sunit) {
> + if (copied_sunit) {
> do_warn(
> -_("Note - stripe unit (%d) and width (%d) fields have been reset.\n"
> - "Please set with mount -o sunit=<value>,swidth=<value>\n"),
> +_("Note - stripe unit (%d) and width (%d) were copied from a backup superblock.\n"
> + "Please reset with mount -o sunit=<value>,swidth=<value> if necessary\n"),
> be32_to_cpu(dsb->sb_unit), be32_to_cpu(dsb->sb_width));
> - dsb->sb_unit = 0;
> - dsb->sb_width = 0;
> }
>
> libxfs_writebuf(sbp, 0);
>
> _______________________________________________
> xfs mailing list
> xfs@xxxxxxxxxxx
> http://oss.sgi.com/mailman/listinfo/xfs
_______________________________________________
xfs mailing list
xfs@xxxxxxxxxxx
http://oss.sgi.com/mailman/listinfo/xfs
