On 06/25/14 19:28, Dave Chinner wrote:
On Wed, Jun 25, 2014 at 11:21:44AM +1000, Dave Chinner wrote:
On Tue, Jun 24, 2014 at 11:50:52PM +0200, Fanael Linithien wrote:
Ok, so the CRC corresponds to the version of the AGI that was logged
at lsn = 0x30000017e. That means the version on disk is a partial
update without a CRC recalculation. Ok, so how can that happen?
Given the lsn mismatch, I suspect log recovery has played a part as
it will not update the LSN when replaying changes in the log. It
should, however, always be attaching the appropriate verifier to
the buffers being recovered so the CRC should be recalculated
correctly.
Ok, I have confirmed that this is occurring and behaving correctly.
[ 24.437878] XFS (vdb): Mounting V5 Filesystem
[ 24.554429] XFS (vdb): Starting recovery (logdev: internal)
[ 24.623466] XFS (vdb): xfs_agi_write_verify: lsn reset block 0x2
[ 24.625263] XFS (vdb): xfs_btree_sblock_calc_crc: lsn reset block 0x8
[ 24.627307] XFS (vdb): xfs_btree_sblock_calc_crc: lsn reset block 0x10
[ 24.628729] XFS (vdb): xfs_btree_sblock_calc_crc: lsn reset block 0x18
[ 24.630085] XFS (vdb): xfs_dir3_data_write_verify: lsn reset block 0x20000
[ 24.631504] XFS (vdb): xfs_da3_node_write_verify: lsn reset block 0x20008
[ 24.632935] XFS (vdb): xfs_dir3_data_write_verify: lsn reset block 0x20010
[ 24.634360] XFS (vdb): xfs_dir3_data_write_verify: lsn reset block 0x20018
[ 24.635622] XFS (vdb): xfs_dir3_free_write_verify: lsn reset block 0x201e0
[ 24.636656] XFS (vdb): __write_verify: lsn reset block 0x201e8
[ 24.637510] XFS (vdb): __write_verify: lsn reset block 0x201f0
[ 24.638365] XFS (vdb): xfs_dir3_data_write_verify: lsn reset block 0x201f8
[ 24.639378] XFS (vdb): xfs_dir3_data_write_verify: lsn reset block 0x202c0
[ 24.640397] XFS (vdb): __write_verify: lsn reset block 0x202c8
[ 24.641260] XFS (vdb): xfs_dir3_data_write_verify: lsn reset block 0x202d0
[ 24.664330] XFS (vdb): Ending recovery (logdev: internal)
But that also confirms that log recovery is recalculating the CRC
after replaying changes into that block:
# xfs_db -c "agi 0" -c "p lsn" -c "p crc" /dev/vdb
lsn = 0xffffffffffffffff
crc = 0x788c4f63 (correct)
So the common log recovery path for buffers is working as it is
designed to do.
What I still don't understand yet is how changes after this recovery
phase are getting to disk without updating the CRC. That implies
buffers without verifiers being written....
More debug to come...
Cheers,
Dave.
Could an out of order CIL push cause this?
SGI saw sequence 2 (and sometimes 3/4) of the cil push get in front of
cil push sequence 1. Looks like the setting of
log->l_cilp->xc_ctx->commit_lsn in xlog_cil_init_post_recovery() lets
this happen.
--Mark.
_______________________________________________
xfs mailing list
xfs@xxxxxxxxxxx
http://oss.sgi.com/mailman/listinfo/xfs
