On Wed, Jun 18, 2014 at 03:02:30PM +1000, Dave Chinner wrote:
> On Tue, Jun 17, 2014 at 08:20:55PM -0700, Jens Axboe wrote:
> > On 2014-06-17 20:13, Dave Chinner wrote:
> > >On Tue, Jun 17, 2014 at 07:24:10PM -0700, Jens Axboe wrote:
> > >>On 2014-06-17 17:28, Dave Chinner wrote:
> > >>>[cc linux-mm]
> > >>>
> > >>>On Tue, Jun 17, 2014 at 07:23:58AM -0600, Jens Axboe wrote:
> > >>>>On 2014-06-16 16:27, Dave Chinner wrote:
> > >>>>>On Mon, Jun 16, 2014 at 01:30:42PM -0600, Jens Axboe wrote:
> > >>>>>>On 06/16/2014 01:19 AM, Dave Chinner wrote:
> > >>>>>>>On Sun, Jun 15, 2014 at 08:58:46PM -0600, Jens Axboe wrote:
> > >>>>>>>>On 2014-06-15 20:00, Dave Chinner wrote:
> > >>>>>>>>>On Mon, Jun 16, 2014 at 08:33:23AM +1000, Dave Chinner wrote:
> > >>>>>>>>>FWIW, the non-linear system CPU overhead of a fs_mark test I've been
> > >>>>>>>>>running isn't anything related to XFS. The async fsync workqueue
> > >>>>>>>>>results in several thousand worker threads dispatching IO
> > >>>>>>>>>concurrently across 16 CPUs:
> > >....
> > >>>>>>>>>I know that the tag allocator has been rewritten, so I tested
> > >>>>>>>>>against a current a current Linus kernel with the XFS aio-fsync
> > >>>>>>>>>patch. The results are all over the place - from several sequential
> > >>>>>>>>>runs of the same test (removing the files in between so each tests
> > >>>>>>>>>starts from an empty fs):
> > >>>>>>>>>
> > >>>>>>>>>Wall time sys time IOPS files/s
> > >>>>>>>>>4m58.151s 11m12.648s 30,000 13,500
> > >>>>>>>>>4m35.075s 12m45.900s 45,000 15,000
> > >>>>>>>>>3m10.665s 11m15.804s 65,000 21,000
> > >>>>>>>>>3m27.384s 11m54.723s 85,000 20,000
> > >>>>>>>>>3m59.574s 11m12.012s 50,000 16,500
> > >>>>>>>>>4m12.704s 12m15.720s 50,000 17,000
>
> ....
> > >But the IOPS rate has definitely increased with this config
> > >- I just saw 90k, 100k and 110k IOPS in the last 3 iterations of the
> > >workload (the above profile is from the 100k IOPS period). However,
> > >the wall time was still only 3m58s, which again tends to implicate
> > >the write() portion of the benchmark for causing the slowdowns
> > >rather than the fsync() portion that is dispatching all the IO...
> >
> > Some contention for this case is hard to avoid, and the above looks
> > better than 3.15 does. So the big question is whether it's worth
> > fixing the gaps with multiple waitqueues (and if that actually still
> > buys us anything), or whether we should just disable them.
> >
> > If I can get you to try one more thing, can you apply this patch and
> > give that a whirl? Get rid of the other patches I sent first, this
> > has everything.
>
> Not much difference in the CPU usage profiles or base line
> performance. It runs at 3m10s from empty memory, and ~3m45s when
> memory starts full of clean pages. system time varies from 10m40s to
> 12m55s with no real correlation to overall runtime.
>
> From observation of all the performance metrics I graph in real
> time, however, the pattern of the peaks and troughs from run to run
> and even iteration to iteration is much more regular than the
> previous patches. So from that perspective it is an improvement.
> Again, all the variability in the graphs show up when free memory
> runs out...
And I've identified the commit that caused the memory reclaim
behaviour to go south:
commit 1f6d64829db78a7e1d63e15c9f48f0a5d2b5a679
Author: Dave Chinner <dchinner@xxxxxxxxxx>
Date: Fri Jun 6 15:59:59 2014 +1000
xfs: block allocation work needs to be kswapd aware
Upon memory pressure, kswapd calls xfs_vm_writepage() from
shrink_page_list(). This can result in delayed allocation occurring
and that gets deferred to the the allocation workqueue.
The allocation then runs outside kswapd context, which means if it
needs memory (and it does to demand page metadata from disk) it can
block in shrink_inactive_list() waiting for IO congestion. These
blocking waits are normally avoiding in kswapd context, so under
memory pressure writeback from kswapd can be arbitrarily delayed by
memory reclaim.
To avoid this, pass the kswapd context to the allocation being done
by the workqueue, so that memory reclaim understands correctly that
the work is being done for kswapd and therefore it is not blocked
and does not delay memory reclaim.
To avoid issues with int->char conversion of flag fields (as noticed
in v1 of this patch) convert the flag fields in the struct
xfs_bmalloca to bool types. pahole indicates these variables are
still single byte variables, so no extra space is consumed by this
change.
cc: <stable@xxxxxxxxxxxxxxx>
Reported-by: Tetsuo Handa <penguin-kernel@xxxxxxxxxxxxxxxxxxx>
Signed-off-by: Dave Chinner <dchinner@xxxxxxxxxx>
Reviewed-by: Christoph Hellwig <hch@xxxxxx>
Signed-off-by: Dave Chinner <david@xxxxxxxxxxxxx>
Reverting this patch results in runtimes of between 3m and 3m10s
regardless of the amount of free memory when the test starts.
I'm probably going to have to revert this and make sure it stays out
of the stable kernels now - I think that unbalancing memory reclaim
and introducing performance degradations of 25-30% to work around a
problem that is only hit by an extreme memory pressure stress test
is a bad trade-off.....
Cheers,
Dave.
--
Dave Chinner
david@xxxxxxxxxxxxx
_______________________________________________
xfs mailing list
xfs@xxxxxxxxxxx
http://oss.sgi.com/mailman/listinfo/xfs
