Just like FSSTRESS_AVOID, FSX_AVOID can be used to add
options at the end of the default fsx runs in each test.
i.e. FSX_AVOID="-H -z -C" will disable punch hole, zero range,
and collapse range calls in all tests which run fsx.
This should handle Ted's concerns about buggy ext4 fallocate
code without needing to add tunables to the kernel to reject
these operations during xfstests runs.
Signed-off-by: Eric Sandeen <sandeen@xxxxxxxxxx>
---
diff --git a/README b/README
index 295d67f..b299c8f 100644
--- a/README
+++ b/README
@@ -68,6 +68,11 @@ Preparing system for tests (IRIX and Linux):
- setenv FSTYP "the filesystem you want to test", the filesystem
type is devised from the TEST_DEV device, but you may want to
override it; if unset, the default is 'xfs'
+ - setenv FSSTRESS_AVOID and/or FSX_AVOID, which contain options
+ added to the end of fsstresss and fsx invocations, respectively,
+ in case you wish to exclude certain operational modes from these
+ tests.
+
- or add a case to the switch in common/config assigning
these variables based on the hostname of your test
machine
diff --git a/tests/generic/075 b/tests/generic/075
index 8b4ab39..af4f34b 100755
--- a/tests/generic/075
+++ b/tests/generic/075
@@ -75,7 +75,7 @@ _do_test()
# This cd and use of -P gets full debug on $here (not TEST_DEV)
cd $out
- if ! $here/ltp/fsx $_param -P $here $seq.$_n &>/dev/null
+ if ! $here/ltp/fsx $_param -P $here $seq.$_n $FSX_AVOID &>/dev/null
then
echo " fsx ($_param) failed, $? - compare $seqres.$_n.{good,bad,fsxlog}"
mv $out/$seq.$_n $seqres.$_n.full
diff --git a/tests/generic/091 b/tests/generic/091
index bb176f1..e7b60fe 100755
--- a/tests/generic/091
+++ b/tests/generic/091
@@ -46,7 +46,7 @@ run_fsx()
echo fsx $@ | tee -a $seqres.full
args=`echo $@ | sed -e "s/ BSIZE / $bsize /g" -e "s/ PSIZE / $psize /g"`
rm -f $TEST_DIR/junk
- $here/ltp/fsx $args $TEST_DIR/junk >>$seqres.full 2>&1
+ $here/ltp/fsx $args $FSX_AVOID $TEST_DIR/junk >>$seqres.full 2>&1
if [ $? -ne 0 ]; then
cat $seqres.full
exit 1
diff --git a/tests/generic/112 b/tests/generic/112
index 4918f75..1e34d99 100755
--- a/tests/generic/112
+++ b/tests/generic/112
@@ -75,7 +75,7 @@ _do_test()
# This cd and use of -P gets full debug on $here (not TEST_DEV)
cd $out
- if ! $here/ltp/fsx $_param -P $here $seq.$_n &>/dev/null
+ if ! $here/ltp/fsx $_param -P $here $FSX_AVOID $seq.$_n &>/dev/null
then
echo " fsx ($_param) returned $? - see $seq.$_n.full"
mv $seq.$_n.fsxlog $seqres.$_n.full
diff --git a/tests/generic/127 b/tests/generic/127
index 58ca91e..f6b7f95 100755
--- a/tests/generic/127
+++ b/tests/generic/127
@@ -51,7 +51,7 @@ _fsx_lite_nommap()
{
echo "=== FSX Light Mode, No Memory Mapping ==="
dd if=/dev/zero of=$TEST_DIR/fsx_lite_nommap bs=${FSX_FILE_SIZE} count=1 > /dev/null 2>&1
- if ! ltp/fsx $FSX_ARGS -L -R -W $TEST_DIR/fsx_lite_nommap > $tmp.output 2>&1
+ if ! ltp/fsx $FSX_ARGS -L -R -W $FSX_AVOID $TEST_DIR/fsx_lite_nommap > $tmp.output 2>&1
then
echo "ltp/fsx $FSX_ARGS -L -R -W $TEST_DIR/fsx_lite_nommap"
cat $tmp.output
@@ -65,7 +65,7 @@ _fsx_lite_mmap()
{
echo "=== FSX Light Mode, Memory Mapping ==="
dd if=/dev/zero of=$TEST_DIR/fsx_lite_mmap bs=${FSX_FILE_SIZE} count=1 > /dev/null 2>&1
- if ! ltp/fsx $FSX_ARGS -L $TEST_DIR/fsx_lite_mmap > $tmp.output 2>&1
+ if ! ltp/fsx $FSX_ARGS -L $FSX_AVOID $TEST_DIR/fsx_lite_mmap > $tmp.output 2>&1
then
echo "ltp/fsx $FSX_ARGS -L fsx_lite_mmap"
cat $tmp.output
@@ -78,7 +78,7 @@ _fsx_lite_mmap()
_fsx_std_nommap()
{
echo "=== FSX Standard Mode, No Memory Mapping ==="
- if ! ltp/fsx $FSX_ARGS -R -W $TEST_DIR/fsx_std_nommap > $tmp.output 2>&1
+ if ! ltp/fsx $FSX_ARGS -R -W $FSX_AVOID $TEST_DIR/fsx_std_nommap > $tmp.output 2>&1
then
echo "ltp/fsx $FSX_ARGS -R -W fsx_std_nommap"
cat $tmp.output
@@ -91,7 +91,7 @@ _fsx_std_nommap()
_fsx_std_mmap()
{
echo "=== FSX Standard Mode, Memory Mapping ==="
- if ! ltp/fsx $FSX_ARGS $TEST_DIR/fsx_std_mmap > $tmp.output 2>&1
+ if ! ltp/fsx $FSX_ARGS $FSX_AVOID $TEST_DIR/fsx_std_mmap > $tmp.output 2>&1
then
echo "ltp/fsx $FSX_ARGS fsx_std_mmap"
cat $tmp.output
diff --git a/tests/generic/231 b/tests/generic/231
index a7cff35..df7d76c 100755
--- a/tests/generic/231
+++ b/tests/generic/231
@@ -48,7 +48,7 @@ _fsx()
SEED=$RANDOM
echo "ltp/fsx $FSX_ARGS -S $SEED $SCRATCH_MNT/fsx_file$i" >>$seqres.full
su $qa_user -c "ltp/fsx $FSX_ARGS -S $SEED \
- $SCRATCH_MNT/fsx_file$i" >$tmp.output$i 2>&1 &
+ $FSX_AVOID $SCRATCH_MNT/fsx_file$i" >$tmp.output$i 2>&1 &
done
for (( i = 1; i <= $tasks; i++ )); do
diff --git a/tests/generic/263 b/tests/generic/263
index bc59865..6ecb74d 100755
--- a/tests/generic/263
+++ b/tests/generic/263
@@ -46,7 +46,7 @@ run_fsx()
echo fsx $@ | tee -a $seqres.full
args=`echo $@ | sed -e "s/ BSIZE / $bsize /g" -e "s/ PSIZE / $psize /g"`
rm -f $TEST_DIR/junk
- $here/ltp/fsx $args $TEST_DIR/junk >>$seqres.full 2>&1
+ $here/ltp/fsx $args $FSX_AVOID $TEST_DIR/junk >>$seqres.full 2>&1
if [ $? -ne 0 ]; then
cat $seqres.full
exit 1
_______________________________________________
xfs mailing list
xfs@xxxxxxxxxxx
http://oss.sgi.com/mailman/listinfo/xfs
