On 04/09/14 23:42, Dave Chinner wrote:
From: Dave Chinner<dchinner@xxxxxxxxxx> And interesting situation can occur if a log IO error occurs during the unmount of a filesystem. The cases reported have the same signature - the update of the superblock counters fails due to a log write IO error: XFS (dm-16): xfs_do_force_shutdown(0x2) called from line 1170 of file fs/xfs/xfs_log.c. Return address = 0xffffffffa08a44a1 XFS (dm-16): Log I/O Error Detected. Shutting down filesystem XFS (dm-16): Unable to update superblock counters. Freespace may not be correct on next mount. XFS (dm-16): xfs_log_force: error 5 returned. XFS (¿-¿¿¿): Please umount the filesystem and rectify the problem(s) It can be seen that the last line of output contains a corrupt device name - this is because the log and xfs_mount structures have already been freed by the time this message is printed. A kernel oops closely follows. The issue is that the shutdown is occurring in a separate IO completion thread to the unmount. Once the shutdown processing has started and all the iclogs are marked with XLOG_STATE_IOERROR, the log shutdown code wakes anyone waiting on a log force so they can process the shutdown error. This wakes up the unmount code that is doing a synchronous transaction to update the superblock counters. The unmount path now sees all the iclogs are marked with XLOG_STATE_IOERROR and so never waits on them again, knowing that if it does, there will not be a wakeup trigger for it and we will hang the unmount if we do. Hence the unmount runs through all the remaining code and frees all the filesystem structures while the xlog_iodone() is still processing the shutdown. When the log shutdown processing completes, xfs_do_force_shutdown() emits the "Please umount the filesystem and rectify the problem(s)" message, and xlog_iodone() then aborts all the objects attached to the iclog. An iclog that has already been freed.... The real issue here is that there is no serialisation point between the log IO and the unmount. We have serialisations points for log writes, log forces, reservations, etc, but we don't actually have any code that wakes for log IO to fully complete. We do that for all other types of object, so why not iclogbufs? Well, it turns out that we can easily do this. We've got xfs_buf handles, and that's what everyone else uses for IO serialisation. i.e. bp->b_sema. So, lets hold iclogbufs locked over IO, and only release the lock in xlog_iodone() when we are finished with the buffer. That way before we tear down the iclog, we can lock and unlock the buffer to ensure IO completion has finished completely before we tear it down. Signed-off-by: Dave Chinner<dchinner@xxxxxxxxxx>
The wait queue "xc_commit_wait" is used for two purposes, first to start the next ic_log buffer completion and also to wake those waiting for a syncronous event. Shutdown does syncronous cil pushes but it does not wait for the IO to happen.
Why not wait for the IO to happen or fail before waking out the sync waiters? If you want to keep the speedier completion of the next cil push add another wait queue. There only a few (typically 8) per filesystem.
--Mark. _______________________________________________ xfs mailing list xfs@xxxxxxxxxxx http://oss.sgi.com/mailman/listinfo/xfs
