From: Namjae Jeon <namjae.jeon@xxxxxxxxxxx> FALLOC_FL_INSERT_RANGE was mentioned as the opposite command of collapse range from discussion between Hugh Dickins and Dave Chinner. In continuation of the work of making the process of non linear editing of media files faster, we introduce here the new flag FALLOC_FL_INSERT_RANGE for fallocate. This flag will work opposite to the newly added FALLOC_FL_COLLAPSE_RANGE flag. As such, specifying FALLOC_FL_INSERT_RANGE flag will insert zeroed-out space in between the file within the range specified by offset and len. User can write new data in this space. e.g. ads. Like collapse range, currently we have the limitation that offset and len should be block size aligned for both XFS and Ext4. The semantics of the flag are : 1) It allocates new zeroed out on disk space of len bytes starting at offset byte without overwriting any existing data. All the data blocks from offset to EOF are shifted towards right to make space for inserting new blocks 2) It should be used exclusively. No other fallocate flag in combination. 3) Offset and length supplied to fallocate should be fs block size aligned in case of xfs and ext4. 4) Insert range does not work for the case when offset is overlapping/beyond i_size. If the user wants to allocate space at the end of file they are advised to use either ftruncate(2) or fallocate(2) with mode 0. 5) It increses the size of file by len bytes. Namjae Jeon (3): fs: Add FALLOC_FL_INSERT_RANGE flags for fallocate xfs: Add support FALLOC_FL_INSERT_RANGE for fallocate ext4: Add support FALLOC_FL_INSERT_RANGE for fallocate TODO : xfsprog: xfsio: Add support FALLOC_FL_INSERT_RANGE for fallocate TODO : xfstests: Add insert range testcase -- 1.7.11-rc0 _______________________________________________ xfs mailing list xfs@xxxxxxxxxxx http://oss.sgi.com/mailman/listinfo/xfs
