[PATCH 3/7] xfs: add fsstress/recovery test

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Dave Chinner <dchinner@xxxxxxxxxx>

This has found several issues with recovery on CRC based
filesystems. It is based on a test case for a dir3 assert failure
provided by Michael L Semon.

Signed-off-by: Dave Chinner <dchinner@xxxxxxxxxx>
---
 tests/xfs/306     | 105 ++++++++++++++++++++++++++++++++++++++++++++++++++++++
 tests/xfs/306.out |   2 ++
 tests/xfs/group   |   1 +
 3 files changed, 108 insertions(+)
 create mode 100644 tests/xfs/306
 create mode 100644 tests/xfs/306.out

diff --git a/tests/xfs/306 b/tests/xfs/306
new file mode 100644
index 0000000..0794de3
--- /dev/null
+++ b/tests/xfs/306
@@ -0,0 +1,105 @@
+#!/bin/bash
+# FS QA Test No. xfs/306
+#
+# Basic log recovery stress test - do lots of stuff, shut down in the middle of
+# it and check that recovery runs to completion and everything can be
+# successfully removed afterwards..
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2013 Red Hat, Inc.  All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc.,  51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+#
+#-----------------------------------------------------------------------
+#
+
+seq=`basename $0`
+seqres=$RESULT_DIR/$seq
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1	# failure is the default!
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+
+_cleanup()
+{
+	cd /
+	umount $SCRATCH_MNT 2>/dev/null
+	rm -f $tmp.*
+}
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+# real QA test starts here
+_supported_fs xfs
+_supported_os Linux
+
+_require_scratch
+
+rm -f $seqres.full
+
+_scratch_mkfs > $seqres.full 2>&1
+_scratch_mount
+
+SLEEP_TIME=$((30 * $TIME_FACTOR))
+PROCS=$((2 * LOAD_FACTOR))
+
+load_dir=$SCRATCH_MNT/test
+
+# let this run for a while
+$FSSTRESS_PROG -n10000000 -p $PROCS -d $load_dir >> $seqres.full 2>&1 &
+sleep $SLEEP_TIME
+killall -q $FSSTRESS_PROG
+wait
+sync
+umount $SCRATCH_MNT
+
+# now mount again, run the load again, this time with a shutdown.
+_scratch_mount
+$XFS_FSR_PROG -v $load_dir >> $seqres.full 2>&1
+$FSSTRESS_PROG -n10000000 -p $PROCS -d $load_dir >> $seqres.full 2>&1 &
+sleep $SLEEP_TIME
+sync
+
+# now shutdown and unmount
+sleep 5
+$here/src/godown $load_dir
+killall -q $FSSTRESS_PROG
+wait
+
+# for some reason fsstress processes manage to live on beyond the wait?
+sleep 5
+umount $SCRATCH_MNT
+
+# now recover, check the filesystem for consistency
+_scratch_mount
+umount $SCRATCH_MNT
+_check_scratch_fs
+
+# now clean up.
+_scratch_mount
+for d in $load_dir/*; do
+        rm -rf $d > /dev/null 2>&1 &
+done
+wait
+umount $SCRATCH_MNT
+_check_scratch_fs
+
+echo "No output is good. Failures are loud."
+
+status=0
+exit
diff --git a/tests/xfs/306.out b/tests/xfs/306.out
new file mode 100644
index 0000000..9fd18a4
--- /dev/null
+++ b/tests/xfs/306.out
@@ -0,0 +1,2 @@
+QA output created by 306
+No output is good. Failures are loud.
diff --git a/tests/xfs/group b/tests/xfs/group
index f6543ed..279ffe2 100644
--- a/tests/xfs/group
+++ b/tests/xfs/group
@@ -185,3 +185,4 @@
 303 auto quick quota
 304 auto quick quota
 305 auto quota
+306 auto stress log metadata repair
-- 
1.8.4.rc3

_______________________________________________
xfs mailing list
xfs@xxxxxxxxxxx
http://oss.sgi.com/mailman/listinfo/xfs




[Index of Archives]     [Linux XFS Devel]     [Linux Filesystem Development]     [Filesystem Testing]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux