Dave, I just applied your patch in my vanilla 3.10.10 Linux. Here are
the new performance figures for XFS:
$ dd if=/dev/zero of=/tmp/diskmnt/filewr.zero bs=1M count=1000 oflag=direct
1000+0 records in
1000+0 records out
1048576000 bytes (1.0 GB) copied, 4.95292 s, 212 MB/s
: )
So things make more sense now... I hit a bug in XFS and ext3 and ufs
do not support some kind of multiblock allocation.
Thank you all,
- Martin
On Thu, Nov 21, 2013 at 6:41 PM, Dave Chinner <david@xxxxxxxxxxxxx> wrote:
> On Thu, Nov 21, 2013 at 08:31:38AM -0500, Martin Boutin wrote:
>> $ uname -a
>> Linux haswell1 3.10.10 #1 SMP PREEMPT Wed Oct 2 11:22:22 CEST 2013
>> i686 GNU/Linux
>
> Oh, it's 32 bit system. Things you don't know from the obfuscating
> codenames everyone uses these days...
>
>> $ mkfs.xfs -s size=4096 -f -l size=32m /dev/md0
>> $ mount -t xfs /dev/md0 /tmp/diskmnt/
>> $ dd if=/dev/zero of=/tmp/diskmnt/filewr.zero bs=1M count=1000 oflag=direct
>> 1000+0 records in
>> 1000+0 records out
>> 1048576000 bytes (1.0 GB) copied, 28.0304 s, 37.4 MB/s
> ....
>> $ cat /proc/mounts
>> (...)
>> /dev/md0 /tmp/diskmnt xfs
>> rw,relatime,attr2,inode64,sunit=1024,swidth=2048,noquota 0 0
>
> sunit/swidth is 512k/1MB
>
>> # same layout for other disks
>> $ fdisk -c -u /dev/sda
> ....
>> Device Boot Start End Blocks Id System
>> /dev/sda1 2048 20565247 10281600 83 Linux
>
> Aligned to 1 MB.
>
>> /dev/sda2 20565248 1953525167 966479960 83 Linux
>
> And that isn't aligned to 1MB. 20565248 / 2048 = 10041.625. It is
> aligned to 4k, though, so there shouldn't be any hardware RMW
> cycles.
>
>> $ xfs_info /dev/md0
>> meta-data=/dev/md0 isize=256 agcount=32, agsize=15101312 blks
>> = sectsz=4096 attr=2
>> data = bsize=4096 blocks=483239168, imaxpct=5
>> = sunit=12
>
> sunit/swidth of 512k/1MB, so it matches the MD device.
>
>> $ xfs_bmap -vvp /tmp/diskmnt/filewr.zero
>> /tmp/diskmnt/filewr.zero:
>> EXT: FILE-OFFSET BLOCK-RANGE AG AG-OFFSET TOTAL FLAGS
>> 0: [0..2047999]: 2049056..4097055 0 (2049056..4097055) 2048000 01111
>> FLAG Values:
>> 010000 Unwritten preallocated extent
>> 001000 Doesn't begin on stripe unit
>> 000100 Doesn't end on stripe unit
>> 000010 Doesn't begin on stripe width
>> 000001 Doesn't end on stripe width
>> # this does not look good, does it?
>
> Yup, looks broken.
>
> /me digs through git.
>
> Yup, commit 27a3f8f ("xfs: introduce xfs_bmap_last_extent") broke
> the code that sets stripe unit alignment for the initial allocation
> way back in 3.2.
>
> [ Hmmm, that would explain the very occasional failure that
> generic/223 throws outi (maybe once a month I see it fail). ]
>
> Which means MD is doing RMW cycles for it's parity calculations, and
> that's where performance is going south.
>
> Current code:
>
> $ xfs_io -fd -c "truncate 0" -c "falloc 0 1g" -c "bmap -vvp" -c "pwrite 0 1g -b 1280k" testfile
> testfile:
> EXT: FILE-OFFSET BLOCK-RANGE AG AG-OFFSET TOTAL FLAGS
> 0: [0..2097151]: 1056..2098207 0 (1056..2098207) 2097152 11111
> FLAG Values:
> 010000 Unwritten preallocated extent
> 001000 Doesn't begin on stripe unit
> 000100 Doesn't end on stripe unit
> 000010 Doesn't begin on stripe width
> 000001 Doesn't end on stripe width
> wrote 1073741824/1073741824 bytes at offset 0
> 1 GiB, 1024 ops; 0:00:02.00 (343.815 MiB/sec and 268.6054 ops/sec)
> $
>
> Which indicates that even if we take direct IO based allocation out
> of the picture, the allocation does not get aligned properly. This
> in on a 3.5TB 12 SAS disk MD RAID6 with sunit=64k,swidth=640k.
>
> With a fixed kernel:
>
> $ xfs_io -fd -c "truncate 0" -c "falloc 0 1g" -c "bmap -vvp" -c "pwrite 0 1g -b 1280k" testfile
> testfile:
> EXT: FILE-OFFSET BLOCK-RANGE AG AG-OFFSET TOTAL FLAGS
> 0: [0..2097151]: 6293504..8390655 0 (6293504..8390655) 2097152 10000
> FLAG Values:
> 010000 Unwritten preallocated extent
> 001000 Doesn't begin on stripe unit
> 000100 Doesn't end on stripe unit
> 000010 Doesn't begin on stripe width
> 000001 Doesn't end on stripe width
> wrote 1073741824/1073741824 bytes at offset 0
> 1 GiB, 820 ops; 0:00:02.00 (415.192 MiB/sec and 332.4779 ops/sec)
> $
>
> It;s clear we have completely stripe swidth aligned allocation and it's 25% faster.
>
> Take fallocate out of the picture so the direct IO does the
> allocation:
>
> $ xfs_io -fd -c "truncate 0" -c "pwrite 0 1g -b 1280k" -c "bmap -vvp" testfile
> wrote 1073741824/1073741824 bytes at offset 0
> 1 GiB, 820 ops; 0:00:02.00 (368.241 MiB/sec and 294.8807 ops/sec)
> testfile:
> EXT: FILE-OFFSET BLOCK-RANGE AG AG-OFFSET TOTAL FLAGS
> 0: [0..2097151]: 2099200..4196351 0 (2099200..4196351) 2097152 00000
> FLAG Values:
> 010000 Unwritten preallocated extent
> 001000 Doesn't begin on stripe unit
> 000100 Doesn't end on stripe unit
> 000010 Doesn't begin on stripe width
> 000001 Doesn't end on stripe width
>
> It's slower than with preallocation (no surprise - no allocation
> overhead per write(2) call after preallocation is done) but the
> allocation is still correctly aligned.
>
> The patch below should fix the unaligned allocation problem you are
> seeing, but because XFS defaults to stripe unit alignment for large
> allocations, you might still see RMW cycles when it aligns to a
> stripe unit that is not the first in a MD stripe. I'll have a quick
> look at fixing that behaviour when the swalloc mount option is
> specified....
>
> Cheers,
>
> Dave.
> --
> Dave Chinner
> david@xxxxxxxxxxxxx
>
> xfs: align initial file allocations correctly.
>
> From: Dave Chinner <dchinner@xxxxxxxxxx>
>
> The function xfs_bmap_isaeof() is used to indicate that an
> allocation is occurring at or past the end of file, and as such
> should be aligned to the underlying storage geometry if possible.
>
> Commit 27a3f8f ("xfs: introduce xfs_bmap_last_extent") changed the
> behaviour of this function for empty files - it turned off
> allocation alignment for this case accidentally. Hence large initial
> allocations from direct IO are not getting correctly aligned to the
> underlying geometry, and that is cause write performance to drop in
> alignment sensitive configurations.
>
> Fix it by considering allocation into empty files as requiring
> aligned allocation again.
>
> Signed-off-by: Dave Chinner <dchinner@xxxxxxxxxx>
> ---
> fs/xfs/xfs_bmap.c | 9 +++++++--
> 1 file changed, 7 insertions(+), 2 deletions(-)
>
> diff --git a/fs/xfs/xfs_bmap.c b/fs/xfs/xfs_bmap.c
> index 3ef11b2..8401f11 100644
> --- a/fs/xfs/xfs_bmap.c
> +++ b/fs/xfs/xfs_bmap.c
> @@ -1635,7 +1635,7 @@ xfs_bmap_last_extent(
> * blocks at the end of the file which do not start at the previous data block,
> * we will try to align the new blocks at stripe unit boundaries.
> *
> - * Returns 0 in bma->aeof if the file (fork) is empty as any new write will be
> + * Returns 1 in bma->aeof if the file (fork) is empty as any new write will be
> * at, or past the EOF.
> */
> STATIC int
> @@ -1650,9 +1650,14 @@ xfs_bmap_isaeof(
> bma->aeof = 0;
> error = xfs_bmap_last_extent(NULL, bma->ip, whichfork, &rec,
> &is_empty);
> - if (error || is_empty)
> + if (error)
> return error;
>
> + if (is_empty) {
> + bma->aeof = 1;
> + return 0;
> + }
> +
> /*
> * Check if we are allocation or past the last extent, or at least into
> * the last delayed allocated extent.
--
Martin Boutin
_______________________________________________
xfs mailing list
xfs@xxxxxxxxxxx
http://oss.sgi.com/mailman/listinfo/xfs
