ping?
On Thu, Nov 07, 2013 at 12:46:35PM -0800, Christoph Hellwig wrote:
> For historical reasons beyond my knowledge xfstests tries to abuse the
> scratch device as test device for nfs and udf. Because not all test
> have inherited the right usage of the _setup_testdir and _cleanup_testdir
> helpers this leads to lots of unessecary test failures.
>
> Remove the special casing, which gets nfs down to a minimal number of
> failures.
>
> Signed-off-by: Christoph Hellwig <hch@xxxxxx>
>
> diff --git a/common/rc b/common/rc
> index ea3af12..c64933a 100644
> --- a/common/rc
> +++ b/common/rc
> @@ -975,11 +975,7 @@ _require_scratch()
> {
> case "$FSTYP" in
> nfs*)
> - echo $SCRATCH_DEV | grep -q ":" > /dev/null 2>&1
> - if [ -z "$SCRATCH_DEV" -o "$?" != "0" ]
> - then
> - _notrun "this test requires a valid \$SCRATCH_DEV"
> - fi
> + _notrun "requires a scratch device"
> ;;
> *)
> if [ -z "$SCRATCH_DEV" -o "`_is_block_dev $SCRATCH_DEV`" = "" ]
> @@ -1773,100 +1769,6 @@ _full_platform_details()
> echo "$os/$platform $host $kernel"
> }
>
> -_setup_udf_scratchdir()
> -{
> - [ "$FSTYP" != "udf" ] \
> - && _fail "setup_udf_testdir: \$FSTYP is not udf"
> - [ -z "$SCRATCH_DEV" -o ! -b "$SCRATCH_DEV" ] \
> - && _notrun "this test requires a valid \$SCRATCH_DEV"
> - [ -z "$SCRATCH_MNT" ] \
> - && _notrun "this test requires a valid \$SCRATCH_MNT"
> -
> - # mounted?
> - if _mount | grep -q $SCRATCH_DEV
> - then
> - # if it's mounted, make sure its on $TEST_RW_DIR
> - if ! _mount | grep $SCRATCH_DEV | grep -q $SCRATCH_MNT
> - then
> - _fail "\$SCRATCH_DEV is mounted but not on \$SCRATCH_MNT - aborting"
> - fi
> - $UMOUNT_PROG $SCRATCH_DEV
> - fi
> -
> - _scratch_mkfs
> - _scratch_mount
> -
> - testdir=$SCRATCH_MNT
> -}
> -
> -_setup_nfs_scratchdir()
> -{
> - [ "$FSTYP" != "nfs" ] \
> - && _fail "setup_nfs_testdir: \$FSTYP is not nfs"
> - [ -z "$SCRATCH_DEV" ] \
> - && _notrun "this test requires a valid host fs for \$SCRATCH_DEV"
> - [ -z "$SCRATCH_MNT" ] \
> - && _notrun "this test requires a valid \$SCRATCH_MNT"
> -
> - # mounted?
> - if _mount | grep -q $SCRATCH_DEV
> - then
> - # if it's mounted, make sure its on $SCRATCH_MNT
> - if ! _mount | grep $SCRATCH_DEV | grep -q $SCRATCH_MNT
> - then
> - _fail "\$SCRATCH_DEV is mounted but not on \$SCRATCH_MNT - aborting"
> - fi
> - $UMOUNT_PROG $SCRATCH_DEV
> - fi
> -
> - _scratch_mkfs
> - _scratch_mount
> -
> - testdir=$SCRATCH_MNT
> -}
> -
> -#
> -# Warning for UDF and NFS:
> -# this function calls _setup_udf_scratchdir and _setup_udf_scratchdir
> -# which actually uses the scratch dir for the test dir.
> -#
> -# This was done because testdir was intended to be a persistent
> -# XFS only partition. This should eventually change, and treat
> -# at least local filesystems all the same.
> -#
> -_setup_testdir()
> -{
> - case $FSTYP in
> - udf)
> - _setup_udf_scratchdir
> - ;;
> - nfs*)
> - _setup_nfs_scratchdir
> - ;;
> - *)
> - testdir=$TEST_DIR
> - ;;
> - esac
> -}
> -
> -_cleanup_testdir()
> -{
> - case $FSTYP in
> - udf)
> - # umount testdir as it is $SCRATCH_MNT which could be used by xfs next
> - [ -n "$testdir" ] && $UMOUNT_PROG $testdir
> - ;;
> - nfs*)
> - # umount testdir as it is $SCRATCH_MNT which could be used by xfs next
> - [ -n "$testdir" ] && $UMOUNT_PROG $testdir
> - ;;
> - *)
> - # do nothing, testdir is $TEST_DIR
> - :
> - ;;
> - esac
> -}
> -
> _link_out_file()
> {
> if [ -z "$1" -o -z "$2" ]; then
> diff --git a/tests/btrfs/005 b/tests/btrfs/005
> index 81badf6..c364e11 100755
> --- a/tests/btrfs/005
> +++ b/tests/btrfs/005
> @@ -135,7 +135,6 @@ _rundefrag()
> _supported_fs btrfs
> _supported_os Linux
>
> -_setup_testdir
> ## We require scratch so that we'll have free contiguous space
> _require_scratch
> _scratch_mkfs >/dev/null 2>&1
> diff --git a/tests/btrfs/014 b/tests/btrfs/014
> index a49cf06..aa3edbb 100755
> --- a/tests/btrfs/014
> +++ b/tests/btrfs/014
> @@ -54,7 +54,6 @@ _balance()
> _supported_fs btrfs
> _supported_os Linux
>
> -_setup_testdir
> _require_scratch
> _scratch_mkfs >/dev/null 2>&1
> _scratch_mount
> diff --git a/tests/generic/001 b/tests/generic/001
> index aa82441..6e5f3dd 100755
> --- a/tests/generic/001
> +++ b/tests/generic/001
> @@ -118,14 +118,14 @@ udf_fsize=20240 # number of sectors for UDF
>
> _setup()
> {
> - if mkdir -p $testdir/$$
> + if mkdir -p $TEST_DIR/$$
> then
> :
> else
> - echo "Error: cannot mkdir \"$testdir/$$\""
> + echo "Error: cannot mkdir \"$TEST_DIR/$$\""
> exit 1
> fi
> - cd $testdir/$$
> + cd $TEST_DIR/$$
>
> $verbose && echo -n "setup "
> sed -e '/^#/d' $tmp.config \
> @@ -286,8 +286,7 @@ _cleanup()
> then
> $verbose && echo "cleanup"
> cd /
> - rm -rf $testdir/$$
> - _cleanup_testdir
> + rm -rf $TEST_DIR/$$
> done_cleanup=true
> fi
> }
> @@ -298,7 +297,6 @@ _cleanup
> status=1
> done_cleanup=false
>
> -_setup_testdir
> _setup
>
> # do the test
> diff --git a/tests/generic/002 b/tests/generic/002
> index 2aeebb1..656d29f 100755
> --- a/tests/generic/002
> +++ b/tests/generic/002
> @@ -38,43 +38,40 @@ trap "_cleanup; exit \$status" 0 1 2 3 15
> _cleanup()
> {
> rm -f $tmp.*
> - _cleanup_testdir
> }
>
> # real QA test starts here
> _supported_fs generic
> _supported_os IRIX Linux
>
> -_setup_testdir
> -
> echo "Silence is goodness ..."
>
> # ensure target directory exists
> -mkdir `dirname $testdir/$tmp` 2>/dev/null
> +mkdir `dirname $TEST_DIR/$tmp` 2>/dev/null
>
> -touch $testdir/$tmp.1
> +touch $TEST_DIR/$tmp.1
> for l in 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
> do
> - ln $testdir/$tmp.1 $testdir/$tmp.$l
> - x=`src/lstat64 $testdir/$tmp.1 | sed -n -e '/ Links: /s/.*Links: *//p'`
> + ln $TEST_DIR/$tmp.1 $TEST_DIR/$tmp.$l
> + x=`src/lstat64 $TEST_DIR/$tmp.1 | sed -n -e '/ Links: /s/.*Links: *//p'`
> if [ "$l" -ne $x ]
> then
> echo "Arrgh, created link #$l and lstat64 looks like ..."
> - src/lstat64 $testdir/$tmp.1
> + src/lstat64 $TEST_DIR/$tmp.1
> status=1
> fi
> done
>
> for l in 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1
> do
> - x=`src/lstat64 $testdir/$tmp.1 | sed -n -e '/ Links: /s/.*Links: *//p'`
> + x=`src/lstat64 $TEST_DIR/$tmp.1 | sed -n -e '/ Links: /s/.*Links: *//p'`
> if [ "$l" -ne $x ]
> then
> echo "Arrgh, about to remove link #$l and lstat64 looks like ..."
> - src/lstat64 $testdir/$tmp.1
> + src/lstat64 $TEST_DIR/$tmp.1
> status=1
> fi
> - rm -f $testdir/$tmp.$l
> + rm -f $TEST_DIR/$tmp.$l
> done
>
> # success, all done
> diff --git a/tests/generic/005 b/tests/generic/005
> index de68b0d..544af14 100755
> --- a/tests/generic/005
> +++ b/tests/generic/005
> @@ -43,10 +43,9 @@ trap "_cleanup; exit \$status" 0 1 2 3 15
>
> _cleanup()
> {
> - cd $testdir
> + cd $TEST_DIR
> rm -f symlink_{0,1,2,3,4}{0,1,2,3,4,5,6,7,8,9} symlink_self empty_file
> cd /
> - _cleanup_testdir
> }
>
> _touch()
> @@ -75,9 +74,7 @@ else
> _supported_os Linux IRIX
> fi
>
> -_setup_testdir
> -
> -cd $testdir
> +cd $TEST_DIR
>
> o=empty_file
> touch $o
> diff --git a/tests/generic/006 b/tests/generic/006
> index 62cc0c8..481e1f1 100755
> --- a/tests/generic/006
> +++ b/tests/generic/006
> @@ -35,8 +35,7 @@ _cleanup()
> {
> cd /
> rm -f $tmp.*
> - rm -rf $testdir/permname.$$
> - _cleanup_testdir
> + rm -rf $TEST_DIR/permname.$$
> }
>
> _count()
> @@ -56,23 +55,21 @@ _count()
> _supported_fs generic
> _supported_os IRIX Linux
>
> -_setup_testdir
> -
> -mkdir $testdir/permname.$$
> +mkdir $TEST_DIR/permname.$$
>
> echo ""
> echo "single thread permname"
> echo "----------------------"
> -mkdir $testdir/permname.$$/a
> -cd $testdir/permname.$$/a
> +mkdir $TEST_DIR/permname.$$/a
> +cd $TEST_DIR/permname.$$/a
> $here/src/permname -c 4 -l 6 -p 1 || echo "permname returned $?"
> find . | _count
>
> echo ""
> echo "multi thread permname"
> echo "----------------------"
> -mkdir $testdir/permname.$$/b
> -cd $testdir/permname.$$/b
> +mkdir $TEST_DIR/permname.$$/b
> +cd $TEST_DIR/permname.$$/b
> $here/src/permname -c 4 -l 6 -p 4 || echo "permname returned $?"
> find . | _count
>
> diff --git a/tests/generic/007 b/tests/generic/007
> index 4947da6..abbee74 100755
> --- a/tests/generic/007
> +++ b/tests/generic/007
> @@ -38,8 +38,7 @@ _cleanup()
> {
> cd /
> rm -f $tmp.*
> - rm -rf $testdir/$seq
> - _cleanup_testdir
> + rm -rf $TEST_DIR/$seq
> }
>
> # get standard environment, filters and checks
> @@ -50,8 +49,6 @@ _cleanup()
> _supported_fs generic
> _supported_os IRIX Linux
>
> -_setup_testdir
> -
> status=1 # default failure
> sourcefile=$tmp.nametest
> seed=1
> @@ -66,8 +63,8 @@ while [ $i -le $num_filenames ]; do
> let i=$i+1
> done
>
> -mkdir $testdir/$seq
> -cd $testdir/$seq
> +mkdir $TEST_DIR/$seq
> +cd $TEST_DIR/$seq
> $here/src/nametest -l $sourcefile -s $seed -i $iterations -z
>
> # success, all done
> diff --git a/tests/generic/010 b/tests/generic/010
> index 0bdfdd5..9d2e76a 100755
> --- a/tests/generic/010
> +++ b/tests/generic/010
> @@ -35,8 +35,7 @@ _cleanup()
> {
> cd /
> rm -f $tmp.*
> - rm -f $testdir/DBtest*.{pag,dir}
> - _cleanup_testdir
> + rm -f $TEST_DIR/DBtest*.{pag,dir}
> }
>
> # filter random number output from dbtest
> @@ -58,11 +57,9 @@ _filter_dbtest()
> _supported_fs generic
> _supported_os IRIX Linux
>
> -_setup_testdir
> -
> rm -f $seqres.full
>
> -cd $testdir
> +cd $TEST_DIR
>
> $here/src/dbtest -l 5 -n 1000 2>&1 | tee -a $seqres.full | _filter_dbtest
>
> diff --git a/tests/generic/011 b/tests/generic/011
> index cad09ed..bed23aa 100755
> --- a/tests/generic/011
> +++ b/tests/generic/011
> @@ -37,7 +37,6 @@ _cleanup()
> cd /
> rm -f $tmp.*
> [ -n "$out" ] && rm -rf $out
> - _cleanup_testdir
> }
>
> # get standard environment, filters and checks
> @@ -48,9 +47,7 @@ _cleanup()
> _supported_fs generic
> _supported_os IRIX Linux
>
> -_setup_testdir
> -
> -out=$testdir/dirstress.$$
> +out=$TEST_DIR/dirstress.$$
>
> rm -f $seqres.full
>
> diff --git a/tests/generic/013 b/tests/generic/013
> index f66cade..8e76d3d 100755
> --- a/tests/generic/013
> +++ b/tests/generic/013
> @@ -41,8 +41,7 @@ _cleanup()
> # such that what it has is greater the 1024 chars and will
> # stop and complain - so get rid of complaint
> # Ref. pv#935754
> - rm -rf $testdir/fsstress.$$.* 2>&1 | grep -v 'Path too long'
> - _cleanup_testdir
> + rm -rf $TEST_DIR/fsstress.$$.* 2>&1 | grep -v 'Path too long'
> }
>
> _filesize()
> @@ -60,7 +59,7 @@ _do_test()
> _param="$2"
> _count="$3"
>
> - out=$testdir/fsstress.$$.$_n
> + out=$TEST_DIR/fsstress.$$.$_n
> rm -rf $out
> if ! mkdir $out
> then
> @@ -93,8 +92,6 @@ _do_test()
> _supported_fs generic
> _supported_os IRIX Linux
>
> -_setup_testdir
> -
> rm -f $seqres.full
> echo "brevity is wit..."
>
> diff --git a/tests/generic/014 b/tests/generic/014
> index d7da9ab..a9c2638 100755
> --- a/tests/generic/014
> +++ b/tests/generic/014
> @@ -35,8 +35,7 @@ _cleanup()
> {
> cd /
> rm -f $tmp.*
> - rm -rf $testdir/truncfile.$$.*
> - _cleanup_testdir
> + rm -rf $TEST_DIR/truncfile.$$.*
> }
>
> # get standard environment, filters and checks
> @@ -47,7 +46,6 @@ _supported_fs generic
> _supported_os IRIX Linux
>
> _require_sparse_files
> -_setup_testdir
>
> # ensure EOF preallocation doesn't massively extend the runtime of this test
> # by limiting the amount of preallocation and therefore the amount of blocks
> @@ -62,7 +60,7 @@ echo "brevity is wit..."
> echo "------"
> echo "test 1"
> echo "------"
> -if ! src/truncfile -c 10000 $testdir/truncfile.$$.0 >$tmp.out 2>&1
> +if ! src/truncfile -c 10000 $TEST_DIR/truncfile.$$.0 >$tmp.out 2>&1
> then
> out=`cat $tmp.out`
> echo "truncfile returned $? : \"$out\""
> diff --git a/tests/generic/020 b/tests/generic/020
> index f004be5..a9bd17a 100755
> --- a/tests/generic/020
> +++ b/tests/generic/020
> @@ -29,21 +29,16 @@ echo "QA output created by $seq"
> here=`pwd`
> tmp=/tmp/$$
> status=0 # success is the default!
> -trap "_cleanup; rm -f $tmp.* $testfile; exit \$status" 0 1 2 3 15
> +trap "rm -f $tmp.* $testfile; exit \$status" 0 1 2 3 15
>
> # get standard environment, filters and checks
> . ./common/rc
> . ./common/filter
> . ./common/attr
>
> -_cleanup()
> -{
> - _cleanup_testdir
> -}
> -
> _filter()
> {
> - sed "s#$testdir[^ :]*#<TESTFILE>#g;
> + sed "s#$TEST_DIR[^ :]*#<TESTFILE>#g;
> s#$tmp[^ :]*#<TMPFILE>#g" $1
> }
>
> @@ -83,11 +78,9 @@ _supported_os Linux
>
> _require_attrs
>
> -_setup_testdir
> -
> rm -f $seqres.full
>
> -testfile=$testdir/attribute_$$
> +testfile=$TEST_DIR/attribute_$$
>
> echo "*** list non-existant file"
> _attr_list $testfile
> diff --git a/tests/generic/068 b/tests/generic/068
> index b160766..a764019 100755
> --- a/tests/generic/068
> +++ b/tests/generic/068
> @@ -36,7 +36,6 @@ ITERATIONS=10
> _cleanup()
> {
> cd /
> - _cleanup_testdir
>
> trap 0 1 2 3 15
> exit $status
> diff --git a/tests/generic/070 b/tests/generic/070
> index ad9031e..3c88df0 100755
> --- a/tests/generic/070
> +++ b/tests/generic/070
> @@ -35,7 +35,6 @@ _cleanup()
> {
> cd /
> rm -f $tmp.*
> - _cleanup_testdir
> }
>
> # get standard environment, filters and checks
> @@ -49,10 +48,8 @@ _supported_os IRIX Linux
>
> _require_attrs
>
> -_setup_testdir
> -
> FSSTRESS_ARGS=`_scale_fsstress_args \
> - -d $testdir/fsstress \
> + -d $TEST_DIR/fsstress \
> -f allocsp=0 \
> -f freesp=0 \
> -f bulkstat=0 \
> diff --git a/tests/generic/074 b/tests/generic/074
> index 55f72c2..668132e 100755
> --- a/tests/generic/074
> +++ b/tests/generic/074
> @@ -34,8 +34,7 @@ trap "_cleanup; exit \$status" 0 1 2 3 15
> _cleanup()
> {
> cd /
> - rm -rf $testdir/fstest.$$.* $tmp.*
> - _cleanup_testdir
> + rm -rf $TEST_DIR/fstest.$$.* $tmp.*
> }
>
> # get standard environment, filters and checks
> @@ -47,7 +46,7 @@ _do_test()
> _n="$1"
> _param="$2"
>
> - out=$testdir/fstest.$$.$_n
> + out=$TEST_DIR/fstest.$$.$_n
> rm -rf $out
> if ! mkdir $out
> then
> @@ -156,8 +155,6 @@ _process_args "$@"
> echo "Params are for $param_type" >>$seqres.full
> echo "Params: n = $numchildren l = $numloops f = $numfiles" >>$seqres.full
>
> -_setup_testdir
> -
> _check_test_fs
>
> # Options:
> diff --git a/tests/generic/075 b/tests/generic/075
> index e806dea..8b4ab39 100755
> --- a/tests/generic/075
> +++ b/tests/generic/075
> @@ -34,8 +34,7 @@ trap "_cleanup; exit \$status" 0 1 2 3 15
> _cleanup()
> {
> cd /
> - rm -rf $testdir/fsx.* $tmp.*
> - _cleanup_testdir
> + rm -rf $TEST_DIR/fsx.* $tmp.*
> }
>
> # get standard environment, filters and checks
> @@ -47,7 +46,7 @@ _do_test()
> _n="$1"
> _param="$2"
>
> - out=$testdir/fsx
> + out=$TEST_DIR/fsx
> rm -rf $out
> if ! mkdir $out
> then
> @@ -136,8 +135,6 @@ _process_args "$@"
> echo "Params are for $param_type" >>$seqres.full
> echo "Params: n = $numops1 N = $numops2 l = $filelen" >>$seqres.full
>
> -_setup_testdir
> -
> rm -f $seqres.full
> echo "brevity is wit..."
>
> diff --git a/tests/generic/093 b/tests/generic/093
> index a8ef52e..fe20f38 100755
> --- a/tests/generic/093
> +++ b/tests/generic/093
> @@ -41,13 +41,12 @@ trap "_cleanup; exit \$status" 0 1 2 3 15
>
> _cleanup()
> {
> - [ -n "$testdir" ] && rm -f $file
> - _cleanup_testdir
> + [ -n "$TEST_DIR" ] && rm -f $file
> }
>
> _testfilter()
> {
> - sed -e "s#$testdir#TESTDIR#g"
> + sed -e "s#$TEST_DIR#TESTDIR#g"
> }
>
> _filefilter()
> @@ -65,12 +64,11 @@ _require_attrs
>
> rm -f $seqres.full
>
> -_setup_testdir
> _need_to_be_root
>
> echo "QA output created by $seq"
> echo ""
> -file=$testdir/$seq.file
> +file=$TEST_DIR/$seq.file
>
> user=`grep ':all=:all=' /etc/capability | tail -1 | $AWK_PROG -F: '{print $1}'`
> uid=`_cat_passwd | grep $user | $AWK_PROG -F: '{print $3}'`
> @@ -149,7 +147,7 @@ echo "list EA on file"
> ${ATTR_PROG} -R -l $file | _filefilter
>
> chown $uid $file
> -chmod ugo+w $testdir
> +chmod ugo+w $TEST_DIR
> echo "as non-root call writemod"
> $runas -u $uid src/writemod $file 2>&1 | _filefilter
>
> diff --git a/tests/generic/097 b/tests/generic/097
> index d7f6ec1..c120422 100755
> --- a/tests/generic/097
> +++ b/tests/generic/097
> @@ -78,8 +78,6 @@ _supported_os IRIX
> _require_scratch
> _require_attrs
>
> -_setup_testdir
> -
> TARGET_DIR=$SCRATCH_MNT
> [ "$FSTYP" == "xfs" ] && TARGET_DIR=$TEST_DIR
> cd $TARGET_DIR
> @@ -245,7 +243,6 @@ echo "list root EAs: none"
> ${ATTR_PROG} -R -l foo
>
> cd /
> -_cleanup_testdir
>
> # Check the filesystem
> _check_scratch_fs
> diff --git a/tests/generic/099 b/tests/generic/099
> index 03fdded..7351966 100755
> --- a/tests/generic/099
> +++ b/tests/generic/099
> @@ -88,7 +88,6 @@ _require_acls
> # get dir
> #export FILE_SYS=xfs
> _require_scratch
> -_setup_testdir
>
> cd $TARGET_DIR
> rm -rf $seq.dir1 # in case file is left over from previous runs.
> diff --git a/tests/generic/100 b/tests/generic/100
> index dfb5252..05d766f 100755
> --- a/tests/generic/100
> +++ b/tests/generic/100
> @@ -69,19 +69,17 @@ tar -cvf $TEMP_DIR/$TAR_FILE $POPULATED_DIR >>$seqres.full 2>&1
>
> # create f/s
> _require_scratch
> -_setup_testdir
>
> # untar on f/s
> -cd $testdir
> +cd $TEST_DIR
> tar -xRvf $TEMP_DIR/$TAR_FILE >>$seqres.full 2>&1
> cd $here
>
> # use diff -qr to compare
> -ls -R -l ${testdir}${POPULATED_DIR} >>$seqres.full 2>&1
> -diff -qr $POPULATED_DIR ${testdir}${POPULATED_DIR}
> +ls -R -l ${TEST_DIR}${POPULATED_DIR} >>$seqres.full 2>&1
> +diff -qr $POPULATED_DIR ${TEST_DIR}${POPULATED_DIR}
>
> cd /
> -_cleanup_testdir
> _check_scratch_fs
>
> status=0
> diff --git a/tests/generic/112 b/tests/generic/112
> index 65b3484..4918f75 100755
> --- a/tests/generic/112
> +++ b/tests/generic/112
> @@ -34,8 +34,7 @@ trap "_cleanup; exit \$status" 0 1 2 3 15
> _cleanup()
> {
> cd /
> - rm -rf $testdir/fsx.* $tmp.*
> - _cleanup_testdir
> + rm -rf $TEST_DIR/fsx.* $tmp.*
> }
>
> # get standard environment, filters and checks
> @@ -47,7 +46,7 @@ _do_test()
> _n="$1"
> _param="$2"
>
> - out=$testdir/fsx
> + out=$TEST_DIR/fsx
> rm -rf $out
> if ! mkdir $out
> then
> @@ -137,8 +136,6 @@ _process_args "$@"
> echo "Params are for $param_type" >>$seqres.full
> echo "Params: n = $numops1 N = $numops2 l = $filelen" >>$seqres.full
>
> -_setup_testdir
> -
> rm -f $seqres.full
> echo "brevity is wit..."
>
> diff --git a/tests/generic/113 b/tests/generic/113
> index 5e9f5fe..56672f0 100755
> --- a/tests/generic/113
> +++ b/tests/generic/113
> @@ -34,8 +34,7 @@ trap "_cleanup; exit \$status" 0 1 2 3 15
> _cleanup()
> {
> cd /
> - rm -f $testdir/aio-stress.$$.*
> - _cleanup_testdir
> + rm -f $TEST_DIR/aio-stress.$$.*
> }
>
> # get standard environment, filters and checks
> @@ -49,11 +48,11 @@ _do_test()
> _count="$3"
> _nproc="$4"
>
> - _files="$testdir/aiostress.$$.$_n"
> + _files="$TEST_DIR/aiostress.$$.$_n"
> __proc=$_nproc
> [ $__proc -gt 1 ] && _param="-t $__proc $_param"
> while [ $__proc -gt 1 ]; do
> - _files="$_files $testdir/aiostress.$$.$_n.$__proc"
> + _files="$_files $TEST_DIR/aiostress.$$.$_n.$__proc"
> let __proc=$__proc-1
> done
> rm -f $_files
> @@ -80,8 +79,6 @@ _supported_os Linux
>
> [ -x $here/ltp/aio-stress ] || _notrun "aio-stress not built for this platform"
>
> -_setup_testdir
> -
> echo "brevity is wit..."
>
> count=1000
> diff --git a/tests/generic/117 b/tests/generic/117
> index 87e6987..f81265b 100755
> --- a/tests/generic/117
> +++ b/tests/generic/117
> @@ -67,7 +67,6 @@ _cleanup()
> {
> cd /
> rm -f $tmp.*
> - _cleanup_testdir
> }
>
> # get standard environment, filters and checks
> @@ -79,7 +78,6 @@ _cleanup()
> _supported_fs generic
> _supported_os IRIX Linux
>
> -_setup_testdir
> _require_scratch
> _require_attrs
>
> diff --git a/tests/generic/123 b/tests/generic/123
> index 41b9d3b..911e9d2 100755
> --- a/tests/generic/123
> +++ b/tests/generic/123
> @@ -35,10 +35,9 @@ trap "_cleanup; exit \$status" 0 1 2 3 15
>
> _cleanup()
> {
> - cd $testdir
> + cd $TEST_DIR
> rm -rf $my_test_subdir
> cd /
> - _cleanup_testdir
> }
>
> # get standard environment, filters and checks
> @@ -51,8 +50,7 @@ _supported_os Linux IRIX
>
> _require_user
>
> -_setup_testdir
> -my_test_subdir=$testdir/123subdir
> +my_test_subdir=$TEST_DIR/123subdir
>
> # create subdir with required permissions
> mkdir -m 755 $my_test_subdir
> diff --git a/tests/generic/124 b/tests/generic/124
> index 92e7619..93ec4a1 100755
> --- a/tests/generic/124
> +++ b/tests/generic/124
> @@ -38,7 +38,6 @@ trap "_cleanup; exit \$status" 0 1 2 3 15
> _cleanup()
> {
> cd /
> - _cleanup_testdir
> }
>
> # get standard environment, filters and checks
> @@ -49,13 +48,12 @@ _cleanup()
> _supported_fs generic
> _supported_os Linux
>
> -_setup_testdir
> _require_scratch
> _scratch_mkfs >/dev/null 2>&1
> _scratch_mount
>
> # Run preallo_rw_pattern on both test and scratch partitions
> -for TESTFILE in $testdir/rw_pattern.tmp $SCRATCH_MNT/rw_pattern.tmp
> +for TESTFILE in $TEST_DIR/rw_pattern.tmp $SCRATCH_MNT/rw_pattern.tmp
> do
> count=1
> while (( count < 101 ))
> diff --git a/tests/generic/125 b/tests/generic/125
> index 18f5cb1..f4ffea5 100755
> --- a/tests/generic/125
> +++ b/tests/generic/125
> @@ -29,12 +29,7 @@ echo "QA output created by $seq"
> here=`pwd`
> tmp=/tmp/$$
> status=1 # failure is the default!
> -trap "_cleanup; exit \$status" 0 1 2 3 15
> -
> -_cleanup()
> -{
> - _cleanup_testdir
> -}
> +trap "exit \$status" 0 1 2 3 15
>
> # get standard environment, filters and checks
> . ./common/rc
> @@ -46,9 +41,7 @@ _supported_os Linux
>
> _require_user
>
> -_setup_testdir
> -
> -TESTDIR=$testdir/ftrunc
> +TESTDIR=$TEST_DIR/ftrunc
> TESTFILE=$TESTDIR/ftrunc.tmp
>
> [ -d $TESTDIR ] && rm -r $TESTDIR
> diff --git a/tests/generic/126 b/tests/generic/126
> index 7fe5bc6..1796527 100755
> --- a/tests/generic/126
> +++ b/tests/generic/126
> @@ -34,7 +34,6 @@ trap "_cleanup; exit \$status" 0 1 2 3 15
> _cleanup()
> {
> cd /
> - _cleanup_testdir
> }
>
> # get standard environment, filters and checks
> @@ -45,11 +44,9 @@ _cleanup()
> _supported_fs generic
> _supported_os Linux
>
> -_setup_testdir
> -
> QA_FS_PERMS=$here/src/fs_perms
>
> -cd $testdir
> +cd $TEST_DIR
> cp $here/src/testx ./testx.file
>
> # file_perm owner_uid owner_gid tester_uid tester_gid perm_to_test expected_result pass=1
> diff --git a/tests/generic/127 b/tests/generic/127
> index 373bf20..58ca91e 100755
> --- a/tests/generic/127
> +++ b/tests/generic/127
> @@ -38,7 +38,6 @@ trap "_cleanup; exit \$status" 0 1 2 3 15
> _cleanup()
> {
> rm -f $tmp.output
> - _cleanup_testdir
> }
>
> # get standard environment, filters and checks
> @@ -51,10 +50,10 @@ FSX_ARGS="-q -l $FSX_FILE_SIZE -o 65536 -S 191110531 -N 100000"
> _fsx_lite_nommap()
> {
> echo "=== FSX Light Mode, No Memory Mapping ==="
> - dd if=/dev/zero of=$testdir/fsx_lite_nommap bs=${FSX_FILE_SIZE} count=1 > /dev/null 2>&1
> - if ! ltp/fsx $FSX_ARGS -L -R -W $testdir/fsx_lite_nommap > $tmp.output 2>&1
> + dd if=/dev/zero of=$TEST_DIR/fsx_lite_nommap bs=${FSX_FILE_SIZE} count=1 > /dev/null 2>&1
> + if ! ltp/fsx $FSX_ARGS -L -R -W $TEST_DIR/fsx_lite_nommap > $tmp.output 2>&1
> then
> - echo "ltp/fsx $FSX_ARGS -L -R -W $testdir/fsx_lite_nommap"
> + echo "ltp/fsx $FSX_ARGS -L -R -W $TEST_DIR/fsx_lite_nommap"
> cat $tmp.output
> return 1
> fi
> @@ -65,8 +64,8 @@ _fsx_lite_nommap()
> _fsx_lite_mmap()
> {
> echo "=== FSX Light Mode, Memory Mapping ==="
> - dd if=/dev/zero of=$testdir/fsx_lite_mmap bs=${FSX_FILE_SIZE} count=1 > /dev/null 2>&1
> - if ! ltp/fsx $FSX_ARGS -L $testdir/fsx_lite_mmap > $tmp.output 2>&1
> + dd if=/dev/zero of=$TEST_DIR/fsx_lite_mmap bs=${FSX_FILE_SIZE} count=1 > /dev/null 2>&1
> + if ! ltp/fsx $FSX_ARGS -L $TEST_DIR/fsx_lite_mmap > $tmp.output 2>&1
> then
> echo "ltp/fsx $FSX_ARGS -L fsx_lite_mmap"
> cat $tmp.output
> @@ -79,7 +78,7 @@ _fsx_lite_mmap()
> _fsx_std_nommap()
> {
> echo "=== FSX Standard Mode, No Memory Mapping ==="
> - if ! ltp/fsx $FSX_ARGS -R -W $testdir/fsx_std_nommap > $tmp.output 2>&1
> + if ! ltp/fsx $FSX_ARGS -R -W $TEST_DIR/fsx_std_nommap > $tmp.output 2>&1
> then
> echo "ltp/fsx $FSX_ARGS -R -W fsx_std_nommap"
> cat $tmp.output
> @@ -92,7 +91,7 @@ _fsx_std_nommap()
> _fsx_std_mmap()
> {
> echo "=== FSX Standard Mode, Memory Mapping ==="
> - if ! ltp/fsx $FSX_ARGS $testdir/fsx_std_mmap > $tmp.output 2>&1
> + if ! ltp/fsx $FSX_ARGS $TEST_DIR/fsx_std_mmap > $tmp.output 2>&1
> then
> echo "ltp/fsx $FSX_ARGS fsx_std_mmap"
> cat $tmp.output
> @@ -106,8 +105,6 @@ _fsx_std_mmap()
> _supported_fs generic
> _supported_os Linux
>
> -_setup_testdir
> -
> _fsx_lite_nommap
> _fsx_lite_mmap
>
> diff --git a/tests/generic/128 b/tests/generic/128
> index c9c809f..22e4f71 100755
> --- a/tests/generic/128
> +++ b/tests/generic/128
> @@ -29,13 +29,7 @@ echo "QA output created by $seq"
> here=`pwd`
> tmp=/tmp/$$
> status=1 # failure is the default!
> -trap "_cleanup; exit \$status" 0 1 2 3 15
> -
> -_cleanup()
> -{
> - cd /
> - _cleanup_testdir
> -}
> +trap "exit \$status" 0 1 2 3 15
>
> # get standard environment, filters and checks
> . ./common/rc
> @@ -45,7 +39,6 @@ _cleanup()
> _supported_fs generic
> _supported_os Linux
>
> -_setup_testdir
> _require_scratch
> _require_user
>
> diff --git a/tests/generic/129 b/tests/generic/129
> index fe763df..9a10d76 100755
> --- a/tests/generic/129
> +++ b/tests/generic/129
> @@ -29,13 +29,7 @@ echo "QA output created by $seq"
> here=`pwd`
> tmp=/tmp/$$
> status=1 # failure is the default!
> -trap "_cleanup; exit \$status" 0 1 2 3 15
> -
> -_cleanup()
> -{
> - cd /
> - _cleanup_testdir
> -}
> +trap "exit \$status" 0 1 2 3 15
>
> # get standard environment, filters and checks
> . ./common/rc
> @@ -54,8 +48,6 @@ _supported_os Linux
> _require_scratch
> _require_sparse_files
>
> -_setup_testdir
> -
> _scratch_mkfs >/dev/null 2>&1
> _scratch_mount "-o nosuid"
>
> diff --git a/tests/generic/130 b/tests/generic/130
> index cfc2c32..8367dc7 100755
> --- a/tests/generic/130
> +++ b/tests/generic/130
> @@ -38,13 +38,7 @@ echo "QA output created by $seq"
> here=`pwd`
> tmp=/tmp/$$
> status=1 # failure is the default!
> -trap "_cleanup; exit \$status" 0 1 2 3 15
> -
> -_cleanup()
> -{
> - cd /
> - _cleanup_testdir
> -}
> +trap "exit \$status" 0 1 2 3 15
>
> # get standard environment, filters and checks
> . ./common/rc
> @@ -57,8 +51,6 @@ _supported_os Linux IRIX
> _require_scratch
> _require_sparse_files
>
> -_setup_testdir
> -
> _scratch_mkfs >/dev/null 2>&1
> _scratch_mount
>
> diff --git a/tests/generic/131 b/tests/generic/131
> index 6c3131c..ce3e490 100755
> --- a/tests/generic/131
> +++ b/tests/generic/131
> @@ -35,7 +35,6 @@ _cleanup()
> {
> kill $locktest_pid2 > /dev/null 2>&1
> kill $locktest_pid1 > /dev/null 2>&1
> - _cleanup_testdir
> }
>
> # get standard environment, filters and checks
> @@ -46,9 +45,7 @@ _cleanup()
> _supported_fs generic
> _supported_os Linux
>
> -_setup_testdir
> -
> -TESTFILE=$testdir/lock_file
> +TESTFILE=$TEST_DIR/lock_file
>
> # Grab a port which is hopefully unused
> if [ $$ -gt 1024 -a $$ -lt 32000 ]; then
> @@ -60,13 +57,13 @@ elif [ $$ -gt 32000 ]; then
> fi
>
> # Start the server
> -src/locktest -p $PORT $TESTFILE 2>&1 > $testdir/server.out &
> +src/locktest -p $PORT $TESTFILE 2>&1 > $TEST_DIR/server.out &
> locktest_pid1=$!
>
> sleep 1
>
> # Start the client
> -src/locktest -p $PORT -h localhost $TESTFILE 2>&1 > $testdir/client.out
> +src/locktest -p $PORT -h localhost $TESTFILE 2>&1 > $TEST_DIR/client.out
> locktest_pid2=$!
> result=$?
> if [ $result -eq 0 ]; then
> @@ -74,7 +71,7 @@ if [ $result -eq 0 ]; then
> status=0
> else
> echo "Client reported failure ($result)"
> - cat $testdir/*.out
> + cat $TEST_DIR/*.out
> fi
>
> exit
> diff --git a/tests/generic/132 b/tests/generic/132
> index 42ab909..aa52c7d 100755
> --- a/tests/generic/132
> +++ b/tests/generic/132
> @@ -30,13 +30,7 @@ echo "QA output created by $seq"
> here=`pwd`
> tmp=/tmp/$$
> status=1 # failure is the default!
> -trap "_cleanup; exit \$status" 0 1 2 3 15
> -
> -_cleanup()
> -{
> - cd /
> - _cleanup_testdir
> -}
> +trap "exit \$status" 0 1 2 3 15
>
> # get standard environment, filters and checks
> . ./common/rc
> @@ -46,7 +40,6 @@ _cleanup()
> _supported_fs generic
> _supported_os Linux IRIX
>
> -_setup_testdir
> _require_scratch
>
> _scratch_mkfs >/dev/null 2>&1
> diff --git a/tests/generic/133 b/tests/generic/133
> index 65ab822..7fb1695 100755
> --- a/tests/generic/133
> +++ b/tests/generic/133
> @@ -29,12 +29,7 @@ echo "QA output created by $seq"
> here=`pwd`
> tmp=/tmp/$$
> status=1 # failure is the default!
> -trap "_cleanup; exit \$status" 0 1 2 3 15
> -
> -_cleanup()
> -{
> - _cleanup_testdir
> -}
> +trap "exit \$status" 0 1 2 3 15
>
> # get standard environment, filters and checks
> . ./common/rc
> @@ -44,35 +39,33 @@ _cleanup()
> _supported_fs generic
> _supported_os Linux IRIX
>
> -_setup_testdir
> -
> echo "Buffered writer, buffered reader"
> -$XFS_IO_PROG -f -d -c 'pwrite -b 64k 0 512m' $testdir/io_test > /dev/null
> -$XFS_IO_PROG -f -c 'pwrite -b 64k 0 512m' $testdir/io_test >/dev/null &
> -$XFS_IO_PROG -c 'pread -b 64k 0 512m' $testdir/io_test > /dev/null
> +$XFS_IO_PROG -f -d -c 'pwrite -b 64k 0 512m' $TEST_DIR/io_test > /dev/null
> +$XFS_IO_PROG -f -c 'pwrite -b 64k 0 512m' $TEST_DIR/io_test >/dev/null &
> +$XFS_IO_PROG -c 'pread -b 64k 0 512m' $TEST_DIR/io_test > /dev/null
> wait
> -rm $testdir/io_test
> +rm $TEST_DIR/io_test
>
> echo "Direct writer, buffered reader"
> -$XFS_IO_PROG -f -d -c 'pwrite -b 64k 0 512m' $testdir/io_test > /dev/null
> -$XFS_IO_PROG -f -d -c 'pwrite -b 64k 0 512m' $testdir/io_test >/dev/null &
> -$XFS_IO_PROG -c 'pread -b 64k 0 512m' $testdir/io_test > /dev/null
> +$XFS_IO_PROG -f -d -c 'pwrite -b 64k 0 512m' $TEST_DIR/io_test > /dev/null
> +$XFS_IO_PROG -f -d -c 'pwrite -b 64k 0 512m' $TEST_DIR/io_test >/dev/null &
> +$XFS_IO_PROG -c 'pread -b 64k 0 512m' $TEST_DIR/io_test > /dev/null
> wait
> -rm $testdir/io_test
> +rm $TEST_DIR/io_test
>
> echo "Buffered writer, direct reader"
> -$XFS_IO_PROG -f -d -c 'pwrite -b 64k 0 512m' $testdir/io_test > /dev/null
> -$XFS_IO_PROG -f -c 'pwrite -b 64k 0 512m' $testdir/io_test >/dev/null &
> -$XFS_IO_PROG -d -c 'pread -b 64k 0 512m' $testdir/io_test > /dev/null
> +$XFS_IO_PROG -f -d -c 'pwrite -b 64k 0 512m' $TEST_DIR/io_test > /dev/null
> +$XFS_IO_PROG -f -c 'pwrite -b 64k 0 512m' $TEST_DIR/io_test >/dev/null &
> +$XFS_IO_PROG -d -c 'pread -b 64k 0 512m' $TEST_DIR/io_test > /dev/null
> wait
> -rm $testdir/io_test
> +rm $TEST_DIR/io_test
>
> echo "Direct writer, direct reader"
> -$XFS_IO_PROG -f -d -c 'pwrite -b 64k 0 512m' $testdir/io_test > /dev/null
> -$XFS_IO_PROG -f -d -c 'pwrite -b 64k 0 512m' $testdir/io_test >/dev/null &
> -$XFS_IO_PROG -d -c 'pread -b 64k 0 512m' $testdir/io_test > /dev/null
> +$XFS_IO_PROG -f -d -c 'pwrite -b 64k 0 512m' $TEST_DIR/io_test > /dev/null
> +$XFS_IO_PROG -f -d -c 'pwrite -b 64k 0 512m' $TEST_DIR/io_test >/dev/null &
> +$XFS_IO_PROG -d -c 'pread -b 64k 0 512m' $TEST_DIR/io_test > /dev/null
> wait
> -rm $testdir/io_test
> +rm $TEST_DIR/io_test
>
> status=0
> exit
> diff --git a/tests/generic/135 b/tests/generic/135
> index 783a106..e3b827a 100755
> --- a/tests/generic/135
> +++ b/tests/generic/135
> @@ -29,13 +29,7 @@ echo "QA output created by $seq"
> here=`pwd`
> tmp=/tmp/$$
> status=1 # failure is the default!
> -trap "_cleanup; exit \$status" 0 1 2 3 15
> -
> -_cleanup()
> -{
> - cd /
> - _cleanup_testdir
> -}
> +trap "exit \$status" 0 1 2 3 15
>
> # get standard environment, filters and checks
> . ./common/rc
> @@ -45,7 +39,6 @@ _cleanup()
> _supported_fs generic
> _supported_os Linux IRIX
>
> -_setup_testdir
> _require_scratch
> _scratch_mkfs >/dev/null 2>&1
>
> diff --git a/tests/generic/141 b/tests/generic/141
> index 83b5486..fa08484 100755
> --- a/tests/generic/141
> +++ b/tests/generic/141
> @@ -29,12 +29,7 @@ echo "QA output created by $seq"
> here=`pwd`
> tmp=/tmp/$$
> status=1 # failure is the default!
> -trap "_cleanup; exit \$status" 0 1 2 3 15
> -
> -_cleanup()
> -{
> - _cleanup_testdir
> -}
> +trap "exit \$status" 0 1 2 3 15
>
> # get standard environment, filters and checks
> . ./common/rc
> @@ -44,7 +39,6 @@ _cleanup()
> _supported_fs generic
> _supported_os Linux
>
> -_setup_testdir
> _require_scratch
> _scratch_mkfs >/dev/null 2>&1
> _scratch_mount
> diff --git a/tests/generic/184 b/tests/generic/184
> index 5d74fa3..dcc8b4e 100755
> --- a/tests/generic/184
> +++ b/tests/generic/184
> @@ -35,7 +35,6 @@ _cleanup()
> {
> cd /
> rm -f $tmp.*
> - _cleanup_testdir
> }
>
> # get standard environment, filters and checks
> @@ -46,12 +45,10 @@ _cleanup()
> _supported_fs generic
> _supported_os IRIX Linux
>
> -_setup_testdir
> -
> -rm -f $testdir/null
> -mknod $testdir/null c 1 3
> -chmod 666 $testdir/null
> -echo fred > $testdir/null
> +rm -f $TEST_DIR/null
> +mknod $TEST_DIR/null c 1 3
> +chmod 666 $TEST_DIR/null
> +echo fred > $TEST_DIR/null
>
> status=$?
> exit
> diff --git a/tests/generic/225 b/tests/generic/225
> index faa542a..73b125a 100755
> --- a/tests/generic/225
> +++ b/tests/generic/225
> @@ -34,7 +34,6 @@ _cleanup()
> {
> cd /
> rm -f $tmp.*
> - _cleanup_testdir
> }
>
> # get standard environment, filters and checks
> diff --git a/tests/generic/237 b/tests/generic/237
> index e5c5a79..6a61ec8 100755
> --- a/tests/generic/237
> +++ b/tests/generic/237
> @@ -42,8 +42,7 @@ _cleanup()
> {
> cd /
> rm -f $tmp.*
> - [ -n "$testdir" ] && rm -rf $testdir/$seq.dir1
> - _cleanup_testdir
> + [ -n "$TEST_DIR" ] && rm -rf $TEST_DIR/$seq.dir1
> }
>
> # real QA test starts here
> @@ -55,14 +54,12 @@ _supported_os Linux
>
> rm -f $seqres.full
>
> -_setup_testdir
> -
> _need_to_be_root
> _acl_setup_ids
> _require_acls
>
> # get dir
> -cd $testdir
> +cd $TEST_DIR
> rm -rf $seq.dir1
> mkdir $seq.dir1
> cd $seq.dir1
> diff --git a/tests/generic/249 b/tests/generic/249
> index 1f25edb..306e820 100755
> --- a/tests/generic/249
> +++ b/tests/generic/249
> @@ -35,7 +35,6 @@ _cleanup()
> cd /
> rm -f $tmp.*
> rm -f $SRC $DST
> - _cleanup_testdir
> }
>
> # get standard environment, filters and checks
> @@ -45,7 +44,6 @@ _cleanup()
> # real QA test starts here
> _supported_fs generic
> _supported_os Linux
> -_setup_testdir
>
> echo "Feel the serenity."
>
> diff --git a/tests/shared/051 b/tests/shared/051
> index 07399cc..e957f86 100755
> --- a/tests/shared/051
> +++ b/tests/shared/051
> @@ -40,8 +40,7 @@ _cleanup()
> {
> cd /
> rm -f $tmp.*
> - [ -n "$testdir" ] && rm -rf $testdir/$seq.dir1
> - _cleanup_testdir
> + [ -n "$TEST_DIR" ] && rm -rf $TEST_DIR/$seq.dir1
> }
>
> # -----
> @@ -76,14 +75,12 @@ _supported_os Linux
>
> rm -f $seqres.full
>
> -_setup_testdir
> -
> _need_to_be_root
> _acl_setup_ids
> _require_acls
>
> # get dir
> -cd $testdir
> +cd $TEST_DIR
> rm -rf $seq.dir1
> mkdir $seq.dir1
> cd $seq.dir1
> diff --git a/tests/shared/218 b/tests/shared/218
> index f21b8b2..cd2076e 100755
> --- a/tests/shared/218
> +++ b/tests/shared/218
> @@ -34,7 +34,6 @@ _cleanup()
> {
> cd /
> rm -f $tmp.*
> - _cleanup_testdir
> }
>
> # get standard environment, filters and checks
> @@ -46,7 +45,6 @@ _cleanup()
> _supported_fs xfs ext4 btrfs
> _supported_os Linux
>
> -_setup_testdir
> # We require scratch so that we'll have free contiguous space
> _require_scratch
> _scratch_mkfs >/dev/null 2>&1
> diff --git a/tests/udf/098 b/tests/udf/098
> index 91e8a22..3a5db39 100755
> --- a/tests/udf/098
> +++ b/tests/udf/098
> @@ -81,8 +81,6 @@ _supported_os IRIX
> _require_scratch
> _require_attrs
>
> -_setup_testdir
> -
> cd $SCRATCH_MNT
>
> echo "create file foo"
> diff --git a/tests/udf/102 b/tests/udf/102
> index e27c086..8fd4697 100755
> --- a/tests/udf/102
> +++ b/tests/udf/102
> @@ -36,7 +36,6 @@ _cleanup()
> {
> rm -f $tmp.*
> cd /
> - _cleanup_testdir
> }
> # get standard environment, filters and checks
> . ./common/rc
> diff --git a/tests/xfs/008 b/tests/xfs/008
> index e7a1768..56be923 100755
> --- a/tests/xfs/008
> +++ b/tests/xfs/008
> @@ -35,8 +35,7 @@ trap "_cleanup; exit \$status" 0 1 2 3 15
> _cleanup()
> {
> rm -f $tmp.*
> - rm -rf $testdir/randholes.$$.*
> - _cleanup_testdir
> + rm -rf $TEST_DIR/randholes.$$.*
> }
>
> _filter()
> @@ -55,7 +54,7 @@ _do_test()
> _holes="$2"
> _param="$3"
>
> - out=$testdir/randholes.$$.$_n
> + out=$TEST_DIR/randholes.$$.$_n
> echo ""
> echo "randholes.$_n : $_param" | _filter
> echo "------------------------------------------"
> @@ -89,8 +88,6 @@ _do_test()
> _supported_fs xfs
> _supported_os IRIX Linux
>
> -_setup_testdir
> -
> rm -f $seqres.full
>
> # Note on special numbers here.
> diff --git a/tests/xfs/012 b/tests/xfs/012
> index cd9c485..4127222 100755
> --- a/tests/xfs/012
> +++ b/tests/xfs/012
> @@ -35,8 +35,7 @@ _cleanup()
> {
> cd /
> rm -f $tmp.*
> - rm -rf $testdir/holes.$$.*
> - _cleanup_testdir
> + rm -rf $TEST_DIR/holes.$$.*
> }
>
> _filesize()
> @@ -56,7 +55,7 @@ _do_test()
>
> failed=0
>
> - out=$testdir/holes.$$.$_n
> + out=$TEST_DIR/holes.$$.$_n
> echo ""
> echo "holes.$_n : $_param"
> echo "-----------------------------------------------"
> @@ -106,8 +105,6 @@ _do_test()
> _supported_fs xfs
> _supported_os IRIX Linux
>
> -_setup_testdir
> -
> rm -f $seqres.full
>
> # small & fairly dense
> diff --git a/tests/xfs/048 b/tests/xfs/048
> index 40667e0..f9fb16f 100755
> --- a/tests/xfs/048
> +++ b/tests/xfs/048
> @@ -39,16 +39,13 @@ _cleanup()
> {
> cd /
> rm -f $tmp.*
> - _cleanup_testdir
> }
>
> # real QA test starts here
> _supported_fs xfs
> _supported_os IRIX Linux
>
> -_setup_testdir
> -
> -src/fault $testdir || exit
> +src/fault $TEST_DIR || exit
>
> # success, all done
> status=0
> diff --git a/tests/xfs/066 b/tests/xfs/066
> index 6d4e1c2..d521ada 100755
> --- a/tests/xfs/066
> +++ b/tests/xfs/066
> @@ -40,22 +40,19 @@ _cleanup()
> {
> cd /
> rm -f $tmp.*
> - _cleanup_testdir
> }
>
> # real QA test starts here
> _supported_fs xfs
> _supported_os IRIX Linux
>
> -_setup_testdir
> -
> _my_stat_filter()
> {
> grep "[sS]ize" | sed "s/.*[sS]ize[: ]*\([[:digit:]]*\).*/\1 largefile/g"
> }
>
> -rm -f $testdir/testfile
> -if src/feature -t $testdir/testfile; then
> +rm -f $TEST_DIR/testfile
> +if src/feature -t $TEST_DIR/testfile; then
> :
> else
> _notrun "Installed libc doesn't correctly handle setrlimit/ftruncate64"
> diff --git a/tests/xfs/078 b/tests/xfs/078
> index f2b674a..e04c6cc 100755
> --- a/tests/xfs/078
> +++ b/tests/xfs/078
> @@ -38,7 +38,6 @@ _cleanup()
> rm -f $tmp.*
> umount -d $LOOP_MNT 2>/dev/null
> rmdir $LOOP_MNT
> - _cleanup_testdir
> }
>
> # get standard environment, filters and checks
> diff --git a/tests/xfs/080 b/tests/xfs/080
> index b1cd0cb..59c6104 100755
> --- a/tests/xfs/080
> +++ b/tests/xfs/080
> @@ -39,7 +39,6 @@ _cleanup()
> {
> cd /
> rm -f $tmp.*
> - _cleanup_testdir
> }
>
> _supported_fs xfs
> @@ -48,13 +47,11 @@ _supported_fs xfs
> # but not at the moment.
> _supported_os Linux
>
> -_setup_testdir
> -
> quiet=-q
> clean=-c
>
> export here
> -cd $testdir
> +cd $TEST_DIR
> echo
>
> # real QA test starts here
> diff --git a/tests/xfs/137 b/tests/xfs/137
> index 90dc1f5..79b3b89 100755
> --- a/tests/xfs/137
> +++ b/tests/xfs/137
> @@ -29,12 +29,7 @@ echo "QA output created by $seq"
> here=`pwd`
> tmp=/tmp/$$
> status=1 # failure is the default!
> -trap "_cleanup; exit \$status" 0 1 2 3 15
> -
> -_cleanup()
> -{
> - _cleanup_testdir
> -}
> +trap "exit \$status" 0 1 2 3 15
>
> # get standard environment, filters and checks
> . ./common/rc
> @@ -44,7 +39,6 @@ _cleanup()
> _supported_fs xfs
> _supported_os Linux IRIX
>
> -_setup_testdir
> _require_scratch
> _scratch_mkfs_xfs >/dev/null 2>&1
> _scratch_mount
> diff --git a/tests/xfs/138 b/tests/xfs/138
> index d3c1009..1b11cf6 100755
> --- a/tests/xfs/138
> +++ b/tests/xfs/138
> @@ -29,12 +29,7 @@ echo "QA output created by $seq"
> here=`pwd`
> tmp=/tmp/$$
> status=1 # failure is the default!
> -trap "_cleanup; exit \$status" 0 1 2 3 15
> -
> -_cleanup()
> -{
> - _cleanup_testdir
> -}
> +trap "exit \$status" 0 1 2 3 15
>
> # get standard environment, filters and checks
> . ./common/rc
> @@ -44,7 +39,6 @@ _cleanup()
> _supported_fs xfs
> _supported_os Linux IRIX
>
> -_setup_testdir
> _require_scratch
> _scratch_mkfs_xfs >/dev/null 2>&1
> _scratch_mount
> diff --git a/tests/xfs/139 b/tests/xfs/139
> index 1fbde58..e5296f7 100755
> --- a/tests/xfs/139
> +++ b/tests/xfs/139
> @@ -29,12 +29,7 @@ echo "QA output created by $seq"
> here=`pwd`
> tmp=/tmp/$$
> status=1 # failure is the default!
> -trap "_cleanup; exit \$status" 0 1 2 3 15
> -
> -_cleanup()
> -{
> - _cleanup_testdir
> -}
> +trap "exit \$status" 0 1 2 3 15
>
> # get standard environment, filters and checks
> . ./common/rc
> @@ -44,7 +39,6 @@ _cleanup()
> _supported_fs xfs
> _supported_os Linux IRIX
>
> -_setup_testdir
> _require_scratch
> _scratch_mkfs_xfs >/dev/null 2>&1
> _scratch_mount
> diff --git a/tests/xfs/140 b/tests/xfs/140
> index ce52272..cccf262 100755
> --- a/tests/xfs/140
> +++ b/tests/xfs/140
> @@ -29,12 +29,7 @@ echo "QA output created by $seq"
> here=`pwd`
> tmp=/tmp/$$
> status=1 # failure is the default!
> -trap "_cleanup; exit \$status" 0 1 2 3 15
> -
> -_cleanup()
> -{
> - _cleanup_testdir
> -}
> +trap "exit \$status" 0 1 2 3 15
>
> # get standard environment, filters and checks
> . ./common/rc
> @@ -44,7 +39,6 @@ _cleanup()
> _supported_fs xfs
> _supported_os Linux IRIX
>
> -_setup_testdir
> _require_scratch
> _scratch_mkfs_xfs >/dev/null 2>&1
> _scratch_mount
> diff --git a/tests/xfs/142 b/tests/xfs/142
> index 5a2ef9e..a1efcc2 100755
> --- a/tests/xfs/142
> +++ b/tests/xfs/142
> @@ -29,12 +29,7 @@ echo "QA output created by $seq"
> here=`pwd`
> tmp=/tmp/$$
> status=1 # failure is the default!
> -trap "_cleanup; exit \$status" 0 1 2 3 15
> -
> -_cleanup()
> -{
> - _cleanup_testdir
> -}
> +trap "exit \$status" 0 1 2 3 15
>
> # get standard environment, filters and checks
> . ./common/rc
> diff --git a/tests/xfs/143 b/tests/xfs/143
> index c86cc0a..c389a2b 100755
> --- a/tests/xfs/143
> +++ b/tests/xfs/143
> @@ -29,12 +29,7 @@ echo "QA output created by $seq"
> here=`pwd`
> tmp=/tmp/$$
> status=1 # failure is the default!
> -trap "_cleanup; exit \$status" 0 1 2 3 15
> -
> -_cleanup()
> -{
> - _cleanup_testdir
> -}
> +trap "exit \$status" 0 1 2 3 15
>
> # get standard environment, filters and checks
> . ./common/rc
> diff --git a/tests/xfs/144 b/tests/xfs/144
> index 0b5b21d..41041c4 100755
> --- a/tests/xfs/144
> +++ b/tests/xfs/144
> @@ -29,12 +29,7 @@ echo "QA output created by $seq"
> here=`pwd`
> tmp=/tmp/$$
> status=1 # failure is the default!
> -trap "_cleanup; exit \$status" 0 1 2 3 15
> -
> -_cleanup()
> -{
> - _cleanup_testdir
> -}
> +trap "exit \$status" 0 1 2 3 15
>
> # get standard environment, filters and checks
> . ./common/rc
> diff --git a/tests/xfs/145 b/tests/xfs/145
> index c8444f0..44b3e4e 100755
> --- a/tests/xfs/145
> +++ b/tests/xfs/145
> @@ -29,12 +29,7 @@ echo "QA output created by $seq"
> here=`pwd`
> tmp=/tmp/$$
> status=1 # failure is the default!
> -trap "_cleanup; exit \$status" 0 1 2 3 15
> -
> -_cleanup()
> -{
> - _cleanup_testdir
> -}
> +trap "exit \$status" 0 1 2 3 15
>
> # get standard environment, filters and checks
> . ./common/rc
> diff --git a/tests/xfs/146 b/tests/xfs/146
> index 1e13d95..c6343f8 100755
> --- a/tests/xfs/146
> +++ b/tests/xfs/146
> @@ -30,12 +30,7 @@ echo "QA output created by $seq"
> here=`pwd`
> tmp=/tmp/$$
> status=1 # failure is the default!
> -trap "_cleanup; exit \$status" 0 1 2 3 15
> -
> -_cleanup()
> -{
> - _cleanup_testdir
> -}
> +trap "exit \$status" 0 1 2 3 15
>
> _report_filter () {
> $PERL_PROG -ne "s/Report: \"0x[0-f]+\" was written and \"0x[0-f]+\" was read at/Report: \"HEX\" was written and \"HEX\" was read at/g ;
> diff --git a/tests/xfs/147 b/tests/xfs/147
> index c22f24a..73ff7f9 100755
> --- a/tests/xfs/147
> +++ b/tests/xfs/147
> @@ -29,12 +29,7 @@ echo "QA output created by $seq"
> here=`pwd`
> tmp=/tmp/$$
> status=1 # failure is the default!
> -trap "_cleanup; exit \$status" 0 1 2 3 15
> -
> -_cleanup()
> -{
> - _cleanup_testdir
> -}
> +trap "exit \$status" 0 1 2 3 15
>
> # get standard environment, filters and checks
> . ./common/rc
> diff --git a/tests/xfs/150 b/tests/xfs/150
> index 3bf1c8b..f9e690a 100755
> --- a/tests/xfs/150
> +++ b/tests/xfs/150
> @@ -29,12 +29,7 @@ echo "QA output created by $seq"
> here=`pwd`
> tmp=/tmp/$$
> status=1 # failure is the default!
> -trap "_cleanup; exit \$status" 0 1 2 3 15
> -
> -_cleanup()
> -{
> - _cleanup_testdir
> -}
> +trap "exit \$status" 0 1 2 3 15
>
> _filter_fs_handle()
> {
> diff --git a/tests/xfs/151 b/tests/xfs/151
> index d2e21f3..bba7094 100755
> --- a/tests/xfs/151
> +++ b/tests/xfs/151
> @@ -31,12 +31,7 @@ echo "QA output created by $seq"
> here=`pwd`
> tmp=/tmp/$$
> status=1 # failure is the default!
> -trap "_cleanup; exit \$status" 0 1 2 3 15
> -
> -_cleanup()
> -{
> - _cleanup_testdir
> -}
> +trap "exit \$status" 0 1 2 3 15
>
> _dm_create_session()
> {
> diff --git a/tests/xfs/152 b/tests/xfs/152
> index 310f0dc..72bdabf 100755
> --- a/tests/xfs/152
> +++ b/tests/xfs/152
> @@ -29,12 +29,7 @@ echo "QA output created by $seq"
> here=`pwd`
> tmp=/tmp/$$
> status=1 # failure is the default!
> -trap "_cleanup; exit \$status" 0 1 2 3 15
> -
> -_cleanup()
> -{
> - _cleanup_testdir
> -}
> +trap "exit \$status" 0 1 2 3 15
>
> _filter_handles()
> {
> diff --git a/tests/xfs/153 b/tests/xfs/153
> index 7b9a316..cac7722 100755
> --- a/tests/xfs/153
> +++ b/tests/xfs/153
> @@ -30,12 +30,7 @@ echo "QA output created by $seq"
> here=`pwd`
> tmp=/tmp/$$
> status=1 # failure is the default!
> -trap "_cleanup; exit \$status" 0 1 2 3 15
> -
> -_cleanup()
> -{
> - _cleanup_testdir
> -}
> +trap "exit \$status" 0 1 2 3 15
>
> # get standard environment, filters and checks
> . ./common/rc
> diff --git a/tests/xfs/154 b/tests/xfs/154
> index c281b37..810a6ac 100755
> --- a/tests/xfs/154
> +++ b/tests/xfs/154
> @@ -29,12 +29,7 @@ echo "QA output created by $seq"
> here=`pwd`
> tmp=/tmp/$$
> status=1 # failure is the default!
> -trap "_cleanup; exit \$status" 0 1 2 3 15
> -
> -_cleanup()
> -{
> - _cleanup_testdir
> -}
> +trap "exit \$status" 0 1 2 3 15
>
> # get standard environment, filters and checks
> . ./common/rc
> diff --git a/tests/xfs/155 b/tests/xfs/155
> index 23316f2..1a1631e 100755
> --- a/tests/xfs/155
> +++ b/tests/xfs/155
> @@ -29,12 +29,7 @@ echo "QA output created by $seq"
> here=`pwd`
> tmp=/tmp/$$
> status=1 # failure is the default!
> -trap "_cleanup; exit \$status" 0 1 2 3 15
> -
> -_cleanup()
> -{
> - _cleanup_testdir
> -}
> +trap "exit \$status" 0 1 2 3 15
>
> # get standard environment, filters and checks
> . ./common/rc
> diff --git a/tests/xfs/156 b/tests/xfs/156
> index 88b8cbf..d6e22b6 100755
> --- a/tests/xfs/156
> +++ b/tests/xfs/156
> @@ -29,12 +29,7 @@ echo "QA output created by $seq"
> here=`pwd`
> tmp=/tmp/$$
> status=1 # failure is the default!
> -trap "_cleanup; exit \$status" 0 1 2 3 15
> -
> -_cleanup()
> -{
> - _cleanup_testdir
> -}
> +trap "exit \$status" 0 1 2 3 15
>
> # get standard environment, filters and checks
> . ./common/rc
> diff --git a/tests/xfs/157 b/tests/xfs/157
> index a1243dc..bf65590 100755
> --- a/tests/xfs/157
> +++ b/tests/xfs/157
> @@ -29,12 +29,7 @@ echo "QA output created by $seq"
> here=`pwd`
> tmp=/tmp/$$
> status=1 # failure is the default!
> -trap "_cleanup; exit \$status" 0 1 2 3 15
> -
> -_cleanup()
> -{
> - _cleanup_testdir
> -}
> +trap "exit \$status" 0 1 2 3 15
>
> # get standard environment, filters and checks
> . ./common/rc
> diff --git a/tests/xfs/158 b/tests/xfs/158
> index 5c4dfcd..596f4c2 100755
> --- a/tests/xfs/158
> +++ b/tests/xfs/158
> @@ -29,12 +29,7 @@ echo "QA output created by $seq"
> here=`pwd`
> tmp=/tmp/$$
> status=1 # failure is the default!
> -trap "_cleanup; exit \$status" 0 1 2 3 15
> -
> -_cleanup()
> -{
> - _cleanup_testdir
> -}
> +trap "exit \$status" 0 1 2 3 15
>
> # get standard environment, filters and checks
> . ./common/rc
> diff --git a/tests/xfs/159 b/tests/xfs/159
> index 8d15162..fc5193f 100755
> --- a/tests/xfs/159
> +++ b/tests/xfs/159
> @@ -29,12 +29,7 @@ echo "QA output created by $seq"
> here=`pwd`
> tmp=/tmp/$$
> status=1 # failure is the default!
> -trap "_cleanup; exit \$status" 0 1 2 3 15
> -
> -_cleanup()
> -{
> - _cleanup_testdir
> -}
> +trap "exit \$status" 0 1 2 3 15
>
> # get standard environment, filters and checks
> . ./common/rc
> diff --git a/tests/xfs/160 b/tests/xfs/160
> index 44e9f2f..9a2e2d0 100755
> --- a/tests/xfs/160
> +++ b/tests/xfs/160
> @@ -29,12 +29,7 @@ echo "QA output created by $seq"
> here=`pwd`
> tmp=/tmp/$$
> status=1 # failure is the default!
> -trap "_cleanup; exit \$status" 0 1 2 3 15
> -
> -_cleanup()
> -{
> - _cleanup_testdir
> -}
> +trap "exit \$status" 0 1 2 3 15
>
> # get standard environment, filters and checks
> . ./common/rc
> diff --git a/tests/xfs/161 b/tests/xfs/161
> index 74d6dbe..11e53de 100755
> --- a/tests/xfs/161
> +++ b/tests/xfs/161
> @@ -30,12 +30,7 @@ echo "QA output created by $seq"
> here=`pwd`
> tmp=/tmp/$$
> status=1 # failure is the default!
> -trap "_cleanup; exit \$status" 0 1 2 3 15
> -
> -_cleanup()
> -{
> - _cleanup_testdir
> -}
> +trap "exit \$status" 0 1 2 3 15
>
> _filter_get_allocinfo()
> {
> diff --git a/tests/xfs/162 b/tests/xfs/162
> index 64d001c..4edb68f 100755
> --- a/tests/xfs/162
> +++ b/tests/xfs/162
> @@ -29,12 +29,7 @@ echo "QA output created by $seq"
> here=`pwd`
> tmp=/tmp/$$
> status=1 # failure is the default!
> -trap "_cleanup; exit \$status" 0 1 2 3 15
> -
> -_cleanup()
> -{
> - _cleanup_testdir
> -}
> +trap "exit \$status" 0 1 2 3 15
>
> # get standard environment, filters and checks
> . ./common/rc
> diff --git a/tests/xfs/163 b/tests/xfs/163
> index 3a2d3b9..e283545 100755
> --- a/tests/xfs/163
> +++ b/tests/xfs/163
> @@ -29,12 +29,7 @@ echo "QA output created by $seq"
> here=`pwd`
> tmp=/tmp/$$
> status=1 # failure is the default!
> -trap "_cleanup; exit \$status" 0 1 2 3 15
> -
> -_cleanup()
> -{
> - _cleanup_testdir
> -}
> +trap "exit \$status" 0 1 2 3 15
>
> _filter_paths()
> {
> diff --git a/tests/xfs/166 b/tests/xfs/166
> index 02b3237..2a96f8a 100755
> --- a/tests/xfs/166
> +++ b/tests/xfs/166
> @@ -29,14 +29,9 @@ echo "QA output created by $seq"
> here=`pwd`
> tmp=/tmp/$$
> status=1 # failure is the default!
> -trap "_cleanup; exit \$status" 0 1 2 3 15
> +trap "exit \$status" 0 1 2 3 15
> rm -f $seqres.full
>
> -_cleanup()
> -{
> - _cleanup_testdir
> -}
> -
> # get standard environment, filters and checks
> . ./common/rc
> . ./common/filter
> @@ -80,7 +75,6 @@ _filter_blocks()
> _supported_fs xfs
> _supported_os Linux
>
> -_setup_testdir
> _require_scratch
> _scratch_mkfs_xfs >/dev/null 2>&1
> _scratch_mount
> diff --git a/tests/xfs/167 b/tests/xfs/167
> index d75de23..ab0156f 100755
> --- a/tests/xfs/167
> +++ b/tests/xfs/167
> @@ -36,7 +36,6 @@ _cleanup()
> {
> $KILLALL_PROG -r -q -TERM fsstress 2> /dev/null
> sync # ensures all fsstress processes died
> - _cleanup_testdir
> }
>
> workout()
> @@ -59,7 +58,6 @@ _supported_os Linux
>
> [ -n "$KILLALL_PROG" ] || _notrun "killall executable not found"
>
> -_setup_testdir
> _require_scratch
> _scratch_mkfs_xfs >/dev/null 2>&1
> _scratch_mount
> diff --git a/tests/xfs/168 b/tests/xfs/168
> index 901125a..6fc4540 100755
> --- a/tests/xfs/168
> +++ b/tests/xfs/168
> @@ -31,12 +31,7 @@ here=`pwd`
> tmp=/tmp/$$
> rm -f $seqres.full
> status=1 # failure is the default!
> -trap "_cleanup; exit \$status" 0 1 2 3 15
> -
> -_cleanup()
> -{
> - _cleanup_testdir
> -}
> +trap "exit \$status" 0 1 2 3 15
>
> _filter_dmapi_print_event() {
> $PERL_PROG -ne '
> diff --git a/tests/xfs/179 b/tests/xfs/179
> index 6402eda..ce50d99 100755
> --- a/tests/xfs/179
> +++ b/tests/xfs/179
> @@ -30,12 +30,7 @@ echo "QA output created by $seq"
> here=`pwd`
> tmp=/tmp/$$
> status=1 # failure is the default!
> -trap "_cleanup; exit \$status" 0 1 2 3 15
> -
> -_cleanup()
> -{
> - _cleanup_testdir
> -}
> +trap "exit \$status" 0 1 2 3 15
>
> # get standard environment, filters and checks
> . ./common/rc
> @@ -45,7 +40,6 @@ _cleanup()
> _supported_fs xfs
> _supported_os Linux IRIX
>
> -_setup_testdir
> _require_scratch
> _scratch_mkfs_xfs >/dev/null 2>&1
> _scratch_mount
> diff --git a/tests/xfs/180 b/tests/xfs/180
> index 404f352..a0fb69a 100755
> --- a/tests/xfs/180
> +++ b/tests/xfs/180
> @@ -30,12 +30,7 @@ echo "QA output created by $seq"
> here=`pwd`
> tmp=/tmp/$$
> status=1 # failure is the default!
> -trap "_cleanup; exit \$status" 0 1 2 3 15
> -
> -_cleanup()
> -{
> - _cleanup_testdir
> -}
> +trap "exit \$status" 0 1 2 3 15
>
> # get standard environment, filters and checks
> . ./common/rc
> @@ -45,7 +40,6 @@ _cleanup()
> _supported_fs xfs
> _supported_os Linux IRIX
>
> -_setup_testdir
> _require_scratch
> _scratch_mkfs_xfs >/dev/null 2>&1
> _scratch_mount
> diff --git a/tests/xfs/182 b/tests/xfs/182
> index f55e018..b75e4fc 100755
> --- a/tests/xfs/182
> +++ b/tests/xfs/182
> @@ -30,12 +30,7 @@ echo "QA output created by $seq"
> here=`pwd`
> tmp=/tmp/$$
> status=1 # failure is the default!
> -trap "_cleanup; exit \$status" 0 1 2 3 15
> -
> -_cleanup()
> -{
> - _cleanup_testdir
> -}
> +trap "exit \$status" 0 1 2 3 15
>
> # get standard environment, filters and checks
> . ./common/rc
> @@ -45,7 +40,6 @@ _cleanup()
> _supported_fs xfs
> _supported_os Linux IRIX
>
> -_setup_testdir
> _require_scratch
> _scratch_mkfs_xfs >/dev/null 2>&1
> _scratch_mount
> diff --git a/tests/xfs/185 b/tests/xfs/185
> index 6de0ca9..17334de 100755
> --- a/tests/xfs/185
> +++ b/tests/xfs/185
> @@ -29,12 +29,7 @@ echo "QA output created by $seq"
> here=`pwd`
> tmp=/tmp/$$
> status=1 # failure is the default!
> -trap "_cleanup; exit \$status" 0 1 2 3 15
> -
> -_cleanup()
> -{
> - _cleanup_testdir
> -}
> +trap "exit \$status" 0 1 2 3 15
>
> # get standard environment, filters and checks
> . ./common/rc
> diff --git a/tests/xfs/216 b/tests/xfs/216
> index a21df9d..8513479 100755
> --- a/tests/xfs/216
> +++ b/tests/xfs/216
> @@ -34,7 +34,6 @@ _cleanup()
> {
> cd /
> rm -f $tmp.*
> - _cleanup_testdir
> }
>
> # get standard environment, filters and checks
> @@ -45,7 +44,6 @@ _cleanup()
> _supported_fs xfs
> _supported_os Linux
>
> -_setup_testdir
> _require_scratch
> _scratch_mkfs_xfs >/dev/null 2>&1
> _scratch_mount
> diff --git a/tests/xfs/217 b/tests/xfs/217
> index 25a6c01..6c439c0 100755
> --- a/tests/xfs/217
> +++ b/tests/xfs/217
> @@ -34,7 +34,6 @@ _cleanup()
> {
> cd /
> rm -f $tmp.*
> - _cleanup_testdir
> }
>
> # get standard environment, filters and checks
> @@ -45,7 +44,6 @@ _cleanup()
> _supported_fs xfs
> _supported_os Linux
>
> -_setup_testdir
> _require_scratch
> _scratch_mkfs_xfs >/dev/null 2>&1
> _scratch_mount
> diff --git a/tests/xfs/250 b/tests/xfs/250
> index b9953f7..3b67c3f 100755
> --- a/tests/xfs/250
> +++ b/tests/xfs/250
> @@ -36,7 +36,6 @@ _cleanup()
> umount -d $LOOP_MNT 2>/dev/null
> rm -f $LOOP_DEV
> rmdir $LOOP_MNT
> - _cleanup_testdir
> }
>
> # get standard environment, filters and checks
>
> _______________________________________________
> xfs mailing list
> xfs@xxxxxxxxxxx
> http://oss.sgi.com/mailman/listinfo/xfs
---end quoted text---
_______________________________________________
xfs mailing list
xfs@xxxxxxxxxxx
http://oss.sgi.com/mailman/listinfo/xfs
