xfstest failures

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Unfortunately it seems our number of test failures is still through the
roof, mostly due to the lack of updates in xfstests for other changes.

To start with the quick group in xfs I see:

generic/263

	This seems to be an old issue we've largely been ignoring
	forever IIRC.  Maybe we finally need an xfail group?

xfs/033

	xfs_Repair now aborts due to a verifier failure in
	xfs_trans_read_buf.  I think this is a real bug introduced
	in xfs_repair when new changes were brought in.  Output diff
	attached.

xfs/187

	Echoes "Need to update test 187 so that initial subtests do not
	use features2".  Why do we make this a fail rather than notrun?

xfs/199

	Has an unexpected XFS_SB_VERSION2_PROJID32BIT in sb_features.
	Given that we switched to projid32 by default this should have
	been updated.

xfs/206

	Does not expect the ftype flag.  Didn't we change a generic
	filter to take care of this?

xfs/296

	Checking for capability on restored file
	-RESTORE_DIR/DUMP_SUBDIR/testfile cap_setgid,cap_setuid+ep
	-# file: RESTORE_DIR/DUMP_SUBDIR/testfile
	-security.capability

	Seems like theres some issues with file capabilities.
--- tests/xfs/033.out	2013-09-09 14:41:08.000000000 +0000
+++ /root/xfstests/results//xfs/033.out.bad	2013-11-06 10:54:25.000000000 +0000
@@ -30,165 +30,9 @@
         - reset superblock...
 Phase 6 - check inode connectivity...
 reinitializing root directory
-        - resetting contents of realtime bitmap and summary inodes
-        - traversing filesystem ...
-        - traversal finished ...
-        - moving disconnected inodes to lost+found ...
-Phase 7 - verify and correct link counts...
-resetting inode INO nlinks from 1 to 2
-done
-Corrupting rt bitmap inode - setting bits to 0
-Wrote X.XXKb (value 0x0)
-Phase 1 - find and verify superblock...
-Phase 2 - using <TYPEOF> log
-        - zero log...
-        - scan filesystem freespace and inode maps...
-        - found root inode chunk
-Phase 3 - for each AG...
-        - scan and clear agi unlinked lists...
-        - process known inodes and perform inode discovery...
-bad magic number 0x0 on inode INO
-bad version number 0x0 on inode INO
-bad magic number 0x0 on inode INO, resetting magic number
-bad version number 0x0 on inode INO, resetting version number
-imap claims a free inode INO is in use, correcting imap and clearing inode
-cleared realtime bitmap inode INO
-        - process newly discovered inodes...
-Phase 4 - check for duplicate blocks...
-        - setting up duplicate extent list...
-        - check for inodes claiming duplicate blocks...
-Phase 5 - rebuild AG headers and trees...
-        - reset superblock...
-Phase 6 - check inode connectivity...
-reinitializing realtime bitmap inode
-        - resetting contents of realtime bitmap and summary inodes
-        - traversing filesystem ...
-        - traversal finished ...
-        - moving disconnected inodes to lost+found ...
-Phase 7 - verify and correct link counts...
-done
-Corrupting rt summary inode - setting bits to 0
-Wrote X.XXKb (value 0x0)
-Phase 1 - find and verify superblock...
-Phase 2 - using <TYPEOF> log
-        - zero log...
-        - scan filesystem freespace and inode maps...
-        - found root inode chunk
-Phase 3 - for each AG...
-        - scan and clear agi unlinked lists...
-        - process known inodes and perform inode discovery...
-bad magic number 0x0 on inode INO
-bad version number 0x0 on inode INO
-bad magic number 0x0 on inode INO, resetting magic number
-bad version number 0x0 on inode INO, resetting version number
-imap claims a free inode INO is in use, correcting imap and clearing inode
-cleared realtime summary inode INO
-        - process newly discovered inodes...
-Phase 4 - check for duplicate blocks...
-        - setting up duplicate extent list...
-        - check for inodes claiming duplicate blocks...
-Phase 5 - rebuild AG headers and trees...
-        - reset superblock...
-Phase 6 - check inode connectivity...
-reinitializing realtime summary inode
-        - resetting contents of realtime bitmap and summary inodes
-        - traversing filesystem ...
-        - traversal finished ...
-        - moving disconnected inodes to lost+found ...
-Phase 7 - verify and correct link counts...
-done
-Corrupting root inode - setting bits to -1
-Wrote X.XXKb (value 0xffffffff)
-Phase 1 - find and verify superblock...
-Phase 2 - using <TYPEOF> log
-        - zero log...
-        - scan filesystem freespace and inode maps...
-        - found root inode chunk
-Phase 3 - for each AG...
-        - scan and clear agi unlinked lists...
-        - process known inodes and perform inode discovery...
-bad magic number 0xffff on inode INO
-bad version number 0xffffffff on inode INO
-bad (negative) size -1 on inode INO
-bad magic number 0xffff on inode INO, resetting magic number
-bad version number 0xffffffff on inode INO, resetting version number
-bad (negative) size -1 on inode INO
-cleared root inode INO
-        - process newly discovered inodes...
-Phase 4 - check for duplicate blocks...
-        - setting up duplicate extent list...
-root inode lost
-        - check for inodes claiming duplicate blocks...
-Phase 5 - rebuild AG headers and trees...
-        - reset superblock...
-Phase 6 - check inode connectivity...
-reinitializing root directory
-        - resetting contents of realtime bitmap and summary inodes
-        - traversing filesystem ...
-        - traversal finished ...
-        - moving disconnected inodes to lost+found ...
-Phase 7 - verify and correct link counts...
-resetting inode INO nlinks from 1 to 2
-done
-Corrupting rt bitmap inode - setting bits to -1
-Wrote X.XXKb (value 0xffffffff)
-Phase 1 - find and verify superblock...
-Phase 2 - using <TYPEOF> log
-        - zero log...
-        - scan filesystem freespace and inode maps...
-        - found root inode chunk
-Phase 3 - for each AG...
-        - scan and clear agi unlinked lists...
-        - process known inodes and perform inode discovery...
-bad magic number 0xffff on inode INO
-bad version number 0xffffffff on inode INO
-bad (negative) size -1 on inode INO
-bad magic number 0xffff on inode INO, resetting magic number
-bad version number 0xffffffff on inode INO, resetting version number
-bad (negative) size -1 on inode INO
-cleared realtime bitmap inode INO
-        - process newly discovered inodes...
-Phase 4 - check for duplicate blocks...
-        - setting up duplicate extent list...
-        - check for inodes claiming duplicate blocks...
-Phase 5 - rebuild AG headers and trees...
-        - reset superblock...
-Phase 6 - check inode connectivity...
-reinitializing realtime bitmap inode
-        - resetting contents of realtime bitmap and summary inodes
-        - traversing filesystem ...
-        - traversal finished ...
-        - moving disconnected inodes to lost+found ...
-Phase 7 - verify and correct link counts...
-done
-Corrupting rt summary inode - setting bits to -1
-Wrote X.XXKb (value 0xffffffff)
-Phase 1 - find and verify superblock...
-Phase 2 - using <TYPEOF> log
-        - zero log...
-        - scan filesystem freespace and inode maps...
-        - found root inode chunk
-Phase 3 - for each AG...
-        - scan and clear agi unlinked lists...
-        - process known inodes and perform inode discovery...
-bad magic number 0xffff on inode INO
-bad version number 0xffffffff on inode INO
-bad (negative) size -1 on inode INO
-bad magic number 0xffff on inode INO, resetting magic number
-bad version number 0xffffffff on inode INO, resetting version number
-bad (negative) size -1 on inode INO
-cleared realtime summary inode INO
-        - process newly discovered inodes...
-Phase 4 - check for duplicate blocks...
-        - setting up duplicate extent list...
-        - check for inodes claiming duplicate blocks...
-Phase 5 - rebuild AG headers and trees...
-        - reset superblock...
-Phase 6 - check inode connectivity...
-reinitializing realtime summary inode
-        - resetting contents of realtime bitmap and summary inodes
-        - traversing filesystem ...
-        - traversal finished ...
-        - moving disconnected inodes to lost+found ...
-Phase 7 - verify and correct link counts...
-done
+xfs_imap_to_bp: xfs_trans_read_buf() returned error 117.
+cache_node_purge: refcount was 1, not zero (node=0x20bc810)
+
+fatal error -- could not iget root inode -- error - 117
+_check_xfs_filesystem: filesystem on /dev/vdc is inconsistent (c) (see /root/xfstests/results//xfs/033.full)
+_check_xfs_filesystem: filesystem on /dev/vdc is inconsistent (r) (see /root/xfstests/results//xfs/033.full)
_______________________________________________
xfs mailing list
xfs@xxxxxxxxxxx
http://oss.sgi.com/mailman/listinfo/xfs

[Index of Archives]     [Linux XFS Devel]     [Linux Filesystem Development]     [Filesystem Testing]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux