Re: [PATCH V4 1/2] xfstests XFS: verify extended attributes after multi-stream xfsdump/xfsrestore

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 10/21/13 3:02 PM, rjohnston@xxxxxxx wrote:
> Verify extended attributes are not lost after multi-stream
> xfsdump/xfsrestore of wholly-sparse files.  The restore succeeds,
> however the extended attributes for that file are lost.
> 
> Signed-off-by: Rich Johnston <rjohnston@xxxxxxx>

Reviewed-by: Eric Sandeen <sandeen@xxxxxxxxxx>

> 
> diff --git a/tests/xfs/350 b/tests/xfs/350
> new file mode 100755
> index 0000000..df4c258
> --- /dev/null
> +++ b/tests/xfs/350
> @@ -0,0 +1,73 @@
> +#! /bin/bash
> +# FS QA Test No. 350
> +#
> +# Verify multi-stream xfsdump/restore preserves extended attributes
> +#
> +#-----------------------------------------------------------------------
> +# Copyright (c) 2013 Red Hat, Inc.  All Rights Reserved.
> +#
> +# This program is free software; you can redistribute it and/or
> +# modify it under the terms of the GNU General Public License as
> +# published by the Free Software Foundation.
> +#
> +# This program is distributed in the hope that it would be useful,
> +# but WITHOUT ANY WARRANTY; without even the implied warranty of
> +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> +# GNU General Public License for more details.
> +#
> +# You should have received a copy of the GNU General Public License
> +# along with this program; if not, write the Free Software Foundation,
> +# Inc.,  51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
> +#-----------------------------------------------------------------------
> +#
> +
> +seq=`basename $0`
> +seqres=$RESULT_DIR/$seq
> +echo "QA output created by $seq"
> +
> +here=`pwd`
> +tmp=/tmp/$$
> +status=1	# failure is the default!
> +trap "_cleanup; exit \$status" 0 1 2 3 15
> +
> +_cleanup()
> +{
> +    cd /
> +    rm -f $tmp.*
> +}
> +
> +# get standard environment, filters and checks
> +. ./common/rc
> +. ./common/filter
> +. ./common/dump
> +. ./common/attr
> +
> +# real QA test starts here
> +
> +# Modify as appropriate.
> +_supported_fs xfs
> +_supported_os Linux
> +_require_scratch
> +
> +# Extended attributes
> +attr_name=attrname
> +attr_value=1234
> +
> +rm -f $seqres.full
> +
> +_create_dumpdir_fill_ea
> +
> +# Create and add wholly-sparse file to the dump directory
> +$XFS_IO_PROG -f -c "truncate 1t" $dump_dir/sparsefile >> $seqres.full 2>&1 \
> +	|| _fail "could not create \"$dump_dir\"/sparsefile"
> +
> +# Set the xattr on sparsefile
> +$ATTR_PROG -s $attr_name -V $attr_value $dump_dir/sparsefile >> $seqres.full 2>&1 \
> +	|| _fail "could not set ATTR for \"$dump_dir\"/sparsefile"
> +
> +_do_dump_multi_file --multi 4  >> $seqres.full 2>&1
> +_do_restore_multi_file --multi 4 >> $seqres.full 2>&1
> +_diff_compare_eas
> +
> +status=0
> +exit
> diff --git a/tests/xfs/350.out b/tests/xfs/350.out
> new file mode 100644
> index 0000000..31a88b8
> --- /dev/null
> +++ b/tests/xfs/350.out
> @@ -0,0 +1,46 @@
> +QA output created by 350
> +Creating directory system to dump using src/fill.
> +Setup Attribute "attr1" set to a 9 byte value for smalll:
> +some_text
> +.Attribute "attr2" set to a 10 byte value for biggg:
> +some_text2
> +.Attribute "attr3" set to a 10 byte value for sub/smalll:
> +some_text3
> +.Attribute "attr4" set to a 10 byte value for sub/biggg:
> +some_text4
> +.Attribute "attr5" set to a 8 byte value for dir:
> +dir_text
> +...............
> +Comparing dump directory with restore directory
> +Looking at the extended attributes (EAs)
> +EAs on dump
> +User names
> +Attribute "attr5" had a 8 byte value for DUMP_DIR/dir:
> +dir_text
> +Attribute "attr1" had a 9 byte value for DUMP_DIR/smalll:
> +some_text
> +Attribute "attrname" had a 4 byte value for DUMP_DIR/sparsefile:
> +1234
> +Attribute "attr3" had a 10 byte value for DUMP_DIR/sub/smalll:
> +some_text3
> +Root names
> +Attribute "attr2" had a 10 byte value for DUMP_DIR/biggg:
> +some_text2
> +Attribute "attr4" had a 10 byte value for DUMP_DIR/sub/biggg:
> +some_text4
> +EAs on restore
> +User names
> +Attribute "attr5" had a 8 byte value for DUMP_DIR/dir:
> +dir_text
> +Attribute "attr1" had a 9 byte value for DUMP_DIR/smalll:
> +some_text
> +Attribute "attrname" had a 4 byte value for DUMP_DIR/sparsefile:
> +1234
> +Attribute "attr3" had a 10 byte value for DUMP_DIR/sub/smalll:
> +some_text3
> +Root names
> +Attribute "attr2" had a 10 byte value for DUMP_DIR/biggg:
> +some_text2
> +Attribute "attr4" had a 10 byte value for DUMP_DIR/sub/biggg:
> +some_text4
> +Files 350.ea1 and 350.ea2 are identical
> diff --git a/tests/xfs/group b/tests/xfs/group
> index 17fff27..efa025d 100644
> --- a/tests/xfs/group
> +++ b/tests/xfs/group
> @@ -179,3 +179,4 @@
>  297 auto freeze
>  298 auto attr symlink quick
>  299 auto quota
> +350 auto dump
> 
> _______________________________________________
> xfs mailing list
> xfs@xxxxxxxxxxx
> http://oss.sgi.com/mailman/listinfo/xfs
> 

_______________________________________________
xfs mailing list
xfs@xxxxxxxxxxx
http://oss.sgi.com/mailman/listinfo/xfs




[Index of Archives]     [Linux XFS Devel]     [Linux Filesystem Development]     [Filesystem Testing]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux