On 9/4/13 5:05 PM, Dave Chinner wrote:
> From: Jie Liu <jeff.liu@xxxxxxxxxx>
>
> Add source files for xfs_log_rlimit.c The new file is used for log
> size calculations and validation shared with userspace.
>
> [dchinner: xfs_log_calc_max_attrsetm_res() does not modify the
> tr_attrsetm reservation, just calculates the maximum. ]
>
> [dchinner: rework loop in xfs_log_get_max_trans_res() ]
>
> [dchinner: implement xfs_log_calc_unit_res() in util.c to give mkfs
> a worse case calculation of the log size needed. ]
2 things:
Ben, seems like your workflow lost the:
From: Jie Liu <jeff.liu@xxxxxxxxxx>
at the top - in git, the author is listed as Dave in git.
(Although those [parentheticals] were pretty fundamental changes,
something I just gave Rich a hard time for) ;)
Also, this now breaks xfstest xfs/216 as a result of the mkfs changes.
What are the plans for that?
Thanks,
-Eric
> Signed-off-by: Jie Liu <jeff.liu@xxxxxxxxxx>
> Signed-off-by: Dave Chinner <dchinner@xxxxxxxxxx>
> ---
> include/xfs_fs.h | 4 +-
> include/xfs_log_format.h | 11 +++-
> libxfs/Makefile | 15 ++++--
> libxfs/util.c | 107 +++++++++++++++++++++++++++++++++++++
> libxfs/xfs.h | 8 +++
> libxfs/xfs_log_rlimit.c | 136 +++++++++++++++++++++++++++++++++++++++++++++++
> mkfs/maxtrres.c | 66 +++++++----------------
> mkfs/xfs_mkfs.c | 105 ++++++++++++++++++++----------------
> mkfs/xfs_mkfs.h | 6 +--
> 9 files changed, 356 insertions(+), 102 deletions(-)
> create mode 100644 libxfs/xfs_log_rlimit.c
>
> diff --git a/include/xfs_fs.h b/include/xfs_fs.h
> index 74b24b2..53e33c2 100644
> --- a/include/xfs_fs.h
> +++ b/include/xfs_fs.h
> @@ -240,7 +240,9 @@ typedef struct xfs_fsop_resblks {
>
>
> /*
> - * Minimum and maximum sizes need for growth checks
> + * Minimum and maximum sizes need for growth checks.
> + *
> + * Block counts are in units of filesystem blocks, not basic blocks.
> */
> #define XFS_MIN_AG_BLOCKS 64
> #define XFS_MIN_LOG_BLOCKS 512ULL
> diff --git a/include/xfs_log_format.h b/include/xfs_log_format.h
> index f57975d..31e3a06 100644
> --- a/include/xfs_log_format.h
> +++ b/include/xfs_log_format.h
> @@ -18,6 +18,9 @@
> #ifndef __XFS_LOG_FORMAT_H__
> #define __XFS_LOG_FORMAT_H__
>
> +struct xfs_mount;
> +struct xfs_trans_res;
> +
> /*
> * On-disk Log Format definitions.
> *
> @@ -49,6 +52,9 @@ typedef __uint32_t xlog_tid_t;
>
> #define XLOG_HEADER_SIZE 512
>
> +/* Minimum number of transactions that must fit in the log (defined by mkfs) */
> +#define XFS_MIN_LOG_FACTOR 3
> +
> #define XLOG_REC_SHIFT(log) \
> BTOBB(1 << (xfs_sb_version_haslogv2(&log->l_mp->m_sb) ? \
> XLOG_MAX_RECORD_BSHIFT : XLOG_BIG_RECORD_BSHIFT))
> @@ -133,7 +139,6 @@ typedef struct xlog_op_header {
> __u16 oh_res2; /* 32 bit align : 2 b */
> } xlog_op_header_t;
>
> -
> /* valid values for h_fmt */
> #define XLOG_FMT_UNKNOWN 0
> #define XLOG_FMT_LINUX_LE 1
> @@ -840,4 +845,8 @@ struct xfs_icreate_log {
> __be32 icl_gen; /* inode generation number to use */
> };
>
> +int xfs_log_calc_unit_res(struct xfs_mount *mp, int unit_bytes);
> +int xfs_log_calc_minimum_size(struct xfs_mount *);
> +
> +
> #endif /* __XFS_LOG_FORMAT_H__ */
> diff --git a/libxfs/Makefile b/libxfs/Makefile
> index 5608020..f0cbae3 100644
> --- a/libxfs/Makefile
> +++ b/libxfs/Makefile
> @@ -17,14 +17,23 @@ CFILES = cache.c \
> xfs_alloc.c \
> xfs_alloc_btree.c \
> xfs_attr.c \
> + xfs_attr_leaf.c \
> xfs_attr_remote.c \
> + xfs_bmap.c \
> + xfs_bmap_btree.c \
> xfs_btree.c \
> + xfs_da_btree.c \
> + xfs_dir2.c \
> + xfs_dir2_block.c \
> + xfs_dir2_data.c \
> + xfs_dir2_leaf.c \
> + xfs_dir2_node.c \
> + xfs_dir2_sf.c \
> xfs_ialloc.c \
> xfs_inode_buf.c \
> xfs_inode_fork.c \
> - xfs_ialloc_btree.c xfs_bmap_btree.c xfs_da_btree.c \
> - xfs_dir2.c xfs_dir2_leaf.c xfs_attr_leaf.c xfs_dir2_block.c \
> - xfs_dir2_node.c xfs_dir2_data.c xfs_dir2_sf.c xfs_bmap.c \
> + xfs_ialloc_btree.c \
> + xfs_log_rlimit.c \
> xfs_rtalloc.c \
> xfs_sb.c \
> xfs_symlink_remote.c \
> diff --git a/libxfs/util.c b/libxfs/util.c
> index d7459e0..8109ab3 100644
> --- a/libxfs/util.c
> +++ b/libxfs/util.c
> @@ -22,6 +22,113 @@
> #include <stdarg.h>
>
> /*
> + * Calculate the worst case log unit reservation for a given superblock
> + * configuration. Copied and munged from the kernel code, and assumes a
> + * worse case header usage (maximum log buffer sizes)
> + */
> +int
> +xfs_log_calc_unit_res(
> + struct xfs_mount *mp,
> + int unit_bytes)
> +{
> + int iclog_space;
> + int iclog_header_size;
> + int iclog_size;
> + uint num_headers;
> +
> + if (xfs_sb_version_haslogv2(&mp->m_sb)) {
> + iclog_size = XLOG_MAX_RECORD_BSIZE;
> + iclog_header_size = BBTOB(iclog_size / XLOG_HEADER_CYCLE_SIZE);
> + } else {
> + iclog_size = XLOG_BIG_RECORD_BSIZE;
> + iclog_header_size = BBSIZE;
> + }
> +
> + /*
> + * Permanent reservations have up to 'cnt'-1 active log operations
> + * in the log. A unit in this case is the amount of space for one
> + * of these log operations. Normal reservations have a cnt of 1
> + * and their unit amount is the total amount of space required.
> + *
> + * The following lines of code account for non-transaction data
> + * which occupy space in the on-disk log.
> + *
> + * Normal form of a transaction is:
> + * <oph><trans-hdr><start-oph><reg1-oph><reg1><reg2-oph>...<commit-oph>
> + * and then there are LR hdrs, split-recs and roundoff at end of syncs.
> + *
> + * We need to account for all the leadup data and trailer data
> + * around the transaction data.
> + * And then we need to account for the worst case in terms of using
> + * more space.
> + * The worst case will happen if:
> + * - the placement of the transaction happens to be such that the
> + * roundoff is at its maximum
> + * - the transaction data is synced before the commit record is synced
> + * i.e. <transaction-data><roundoff> | <commit-rec><roundoff>
> + * Therefore the commit record is in its own Log Record.
> + * This can happen as the commit record is called with its
> + * own region to xlog_write().
> + * This then means that in the worst case, roundoff can happen for
> + * the commit-rec as well.
> + * The commit-rec is smaller than padding in this scenario and so it is
> + * not added separately.
> + */
> +
> + /* for trans header */
> + unit_bytes += sizeof(xlog_op_header_t);
> + unit_bytes += sizeof(xfs_trans_header_t);
> +
> + /* for start-rec */
> + unit_bytes += sizeof(xlog_op_header_t);
> +
> + /*
> + * for LR headers - the space for data in an iclog is the size minus
> + * the space used for the headers. If we use the iclog size, then we
> + * undercalculate the number of headers required.
> + *
> + * Furthermore - the addition of op headers for split-recs might
> + * increase the space required enough to require more log and op
> + * headers, so take that into account too.
> + *
> + * IMPORTANT: This reservation makes the assumption that if this
> + * transaction is the first in an iclog and hence has the LR headers
> + * accounted to it, then the remaining space in the iclog is
> + * exclusively for this transaction. i.e. if the transaction is larger
> + * than the iclog, it will be the only thing in that iclog.
> + * Fundamentally, this means we must pass the entire log vector to
> + * xlog_write to guarantee this.
> + */
> + iclog_space = iclog_size - iclog_header_size;
> + num_headers = howmany(unit_bytes, iclog_space);
> +
> + /* for split-recs - ophdrs added when data split over LRs */
> + unit_bytes += sizeof(xlog_op_header_t) * num_headers;
> +
> + /* add extra header reservations if we overrun */
> + while (!num_headers ||
> + howmany(unit_bytes, iclog_space) > num_headers) {
> + unit_bytes += sizeof(xlog_op_header_t);
> + num_headers++;
> + }
> + unit_bytes += iclog_header_size * num_headers;
> +
> + /* for commit-rec LR header - note: padding will subsume the ophdr */
> + unit_bytes += iclog_header_size;
> +
> + /* for roundoff padding for transaction data and one for commit record */
> + if (xfs_sb_version_haslogv2(&mp->m_sb) && mp->m_sb.sb_logsunit > 1) {
> + /* log su roundoff */
> + unit_bytes += 2 * mp->m_sb.sb_logsunit;
> + } else {
> + /* BB roundoff */
> + unit_bytes += 2 * BBSIZE;
> + }
> +
> + return unit_bytes;
> +}
> +
> +/*
> * Change the requested timestamp in the given inode.
> *
> * This was once shared with the kernel, but has diverged to the point
> diff --git a/libxfs/xfs.h b/libxfs/xfs.h
> index 0ab5f21..31acf1b 100644
> --- a/libxfs/xfs.h
> +++ b/libxfs/xfs.h
> @@ -208,6 +208,14 @@ roundup_pow_of_two(uint v)
> return 0;
> }
>
> +static inline __uint64_t
> +roundup_64(__uint64_t x, __uint32_t y)
> +{
> + x += y - 1;
> + do_div(x, y);
> + return x * y;
> +}
> +
> /* buffer management */
> #define XFS_BUF_LOCK 0
> #define XFS_BUF_TRYLOCK 0
> diff --git a/libxfs/xfs_log_rlimit.c b/libxfs/xfs_log_rlimit.c
> new file mode 100644
> index 0000000..f52beed
> --- /dev/null
> +++ b/libxfs/xfs_log_rlimit.c
> @@ -0,0 +1,136 @@
> +/*
> + * Copyright (c) 2013 Jie Liu.
> + * All Rights Reserved.
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it would be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write the Free Software Foundation,
> + * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
> + */
> +#include <xfs.h>
> +
> +/*
> + * Calculate the maximum length in bytes that would be required for a local
> + * attribute value as large attributes out of line are not logged.
> + */
> +STATIC int
> +xfs_log_calc_max_attrsetm_res(
> + struct xfs_mount *mp)
> +{
> + int size;
> + int nblks;
> +
> + size = xfs_attr_leaf_entsize_local_max(mp->m_sb.sb_blocksize) -
> + MAXNAMELEN - 1;
> + nblks = XFS_DAENTER_SPACE_RES(mp, XFS_ATTR_FORK);
> + nblks += XFS_B_TO_FSB(mp, size);
> + nblks += XFS_NEXTENTADD_SPACE_RES(mp, size, XFS_ATTR_FORK);
> +
> + return M_RES(mp)->tr_attrsetm.tr_logres +
> + M_RES(mp)->tr_attrsetrt.tr_logres * nblks;
> +}
> +
> +/*
> + * Iterate over the log space reservation table to figure out and return
> + * the maximum one in terms of the pre-calculated values which were done
> + * at mount time.
> + */
> +STATIC void
> +xfs_log_get_max_trans_res(
> + struct xfs_mount *mp,
> + struct xfs_trans_res *max_resp)
> +{
> + struct xfs_trans_res *resp;
> + struct xfs_trans_res *end_resp;
> + int log_space = 0;
> + int attr_space;
> +
> + attr_space = xfs_log_calc_max_attrsetm_res(mp);
> +
> + resp = (struct xfs_trans_res *)M_RES(mp);
> + end_resp = (struct xfs_trans_res *)(M_RES(mp) + 1);
> + for (; resp < end_resp; resp++) {
> + int tmp = resp->tr_logcount > 1 ?
> + resp->tr_logres * resp->tr_logcount :
> + resp->tr_logres;
> + if (log_space < tmp) {
> + log_space = tmp;
> + *max_resp = *resp; /* struct copy */
> + }
> + }
> +
> + if (attr_space > log_space) {
> + *max_resp = M_RES(mp)->tr_attrsetm; /* struct copy */
> + max_resp->tr_logres = attr_space;
> + }
> +}
> +
> +/*
> + * Calculate the minimum valid log size for the given superblock configuration.
> + * Used to calculate the minimum log size at mkfs time, and to determine if
> + * the log is large enough or not at mount time. Returns the minimum size in
> + * filesystem block size units.
> + */
> +int
> +xfs_log_calc_minimum_size(
> + struct xfs_mount *mp)
> +{
> + struct xfs_trans_res tres = {0};
> + int max_logres;
> + int min_logblks = 0;
> + int lsunit = 0;
> +
> + xfs_log_get_max_trans_res(mp, &tres);
> +
> + max_logres = xfs_log_calc_unit_res(mp, tres.tr_logres);
> + if (tres.tr_logcount > 1)
> + max_logres *= tres.tr_logcount;
> +
> + if (xfs_sb_version_haslogv2(&mp->m_sb) && mp->m_sb.sb_logsunit > 1)
> + lsunit = BTOBB(mp->m_sb.sb_logsunit);
> +
> + /*
> + * Two factors should be taken into account for calculating the minimum
> + * log space.
> + * 1) The fundamental limitation is that no single transaction can be
> + * larger than half size of the log.
> + *
> + * From mkfs.xfs, this is considered by the XFS_MIN_LOG_FACTOR
> + * define, which is set to 3. That means we can definitely fit
> + * maximally sized 2 transactions in the log. We'll use this same
> + * value here.
> + *
> + * 2) If the lsunit option is specified, a transaction requires 2 LSU
> + * for the reservation because there are two log writes that can
> + * require padding - the transaction data and the commit record which
> + * are written separately and both can require padding to the LSU.
> + * Consider that we can have an active CIL reservation holding 2*LSU,
> + * but the CIL is not over a push threshold, in this case, if we
> + * don't have enough log space for at one new transaction, which
> + * includes another 2*LSU in the reservation, we will run into dead
> + * loop situation in log space grant procedure. i.e.
> + * xlog_grant_head_wait().
> + *
> + * Hence the log size needs to be able to contain two maximally sized
> + * and padded transactions, which is (2 * (2 * LSU + maxlres)).
> + *
> + * Also, the log size should be a multiple of the log stripe unit, round
> + * it up to lsunit boundary if lsunit is specified.
> + */
> + if (lsunit) {
> + min_logblks = roundup_64(BTOBB(max_logres), lsunit) +
> + 2 * lsunit;
> + } else
> + min_logblks = BTOBB(max_logres) + 2 * BBSIZE;
> + min_logblks *= XFS_MIN_LOG_FACTOR;
> +
> + return XFS_BB_TO_FSB(mp, min_logblks);
> +}
> diff --git a/mkfs/maxtrres.c b/mkfs/maxtrres.c
> index 59cdcfd..feeab9c 100644
> --- a/mkfs/maxtrres.c
> +++ b/mkfs/maxtrres.c
> @@ -27,46 +27,6 @@
> #include <xfs/libxfs.h>
> #include "xfs_mkfs.h"
>
> -static void
> -max_attrsetm_trans_res_adjust(
> - xfs_mount_t *mp)
> -{
> - int local;
> - int size;
> - int nblks;
> - int res;
> -
> - /*
> - * Determine space the maximal sized attribute will use,
> - * to calculate the largest reservation size needed.
> - */
> - size = libxfs_attr_leaf_newentsize(MAXNAMELEN, 64 * 1024,
> - mp->m_sb.sb_blocksize, &local);
> - ASSERT(!local);
> - nblks = XFS_DAENTER_SPACE_RES(mp, XFS_ATTR_FORK);
> - nblks += XFS_B_TO_FSB(mp, size);
> - nblks += XFS_NEXTENTADD_SPACE_RES(mp, size, XFS_ATTR_FORK);
> - res = M_RES(mp)->tr_attrsetm.tr_logres +
> - M_RES(mp)->tr_attrsetrt.tr_logres * nblks;
> - M_RES(mp)->tr_attrsetm.tr_logres = res;
> -}
> -
> -static int
> -max_trans_res_by_mount(
> - struct xfs_mount *mp)
> -{
> - struct xfs_trans_resv *tr = &mp->m_resv;
> - struct xfs_trans_res *p;
> - struct xfs_trans_res rval = {0};
> -
> - for (p = (struct xfs_trans_res *)tr;
> - p < (struct xfs_trans_res *)(tr + 1); p++) {
> - if (p->tr_logres > rval.tr_logres)
> - rval = *p;
> - }
> - return rval.tr_logres;
> -}
> -
> int
> max_trans_res(
> int crcs_enabled,
> @@ -74,11 +34,13 @@ max_trans_res(
> int sectorlog,
> int blocklog,
> int inodelog,
> - int dirblocklog)
> + int dirblocklog,
> + int logversion,
> + int log_sunit)
> {
> xfs_sb_t *sbp;
> xfs_mount_t mount;
> - int maxres, maxfsb;
> + int maxfsb;
>
> memset(&mount, 0, sizeof(mount));
> sbp = &mount.m_sb;
> @@ -93,19 +55,27 @@ max_trans_res(
> sbp->sb_inodesize = 1 << inodelog;
> sbp->sb_inopblock = 1 << (blocklog - inodelog);
> sbp->sb_dirblklog = dirblocklog - blocklog;
> +
> + if (log_sunit > 0) {
> + log_sunit <<= blocklog;
> + logversion = 2;
> + } else
> + log_sunit = 1;
> + sbp->sb_logsunit = log_sunit;
> +
> sbp->sb_versionnum =
> (crcs_enabled ? XFS_SB_VERSION_5 : XFS_SB_VERSION_4) |
> - (dirversion == 2 ? XFS_SB_VERSION_DIRV2BIT : 0);
> + (dirversion == 2 ? XFS_SB_VERSION_DIRV2BIT : 0) |
> + (logversion > 1 ? XFS_SB_VERSION_LOGV2BIT : 0);
>
> libxfs_mount(&mount, sbp, 0,0,0,0);
> - max_attrsetm_trans_res_adjust(&mount);
> - maxres = max_trans_res_by_mount(&mount);
> - maxfsb = XFS_B_TO_FSB(&mount, maxres);
> + maxfsb = xfs_log_calc_minimum_size(&mount);
> libxfs_umount(&mount);
>
> #if 0
> - printf("#define\tMAXTRRES_S%d_B%d_I%d_D%d_V%d\t%lld\n",
> - sectorlog, blocklog, inodelog, dirblocklog, dirversion, maxfsb);
> + printf("#define\tMAXTRRES_S%d_B%d_I%d_D%d_V%d_LSU%d\t%d\n",
> + sectorlog, blocklog, inodelog, dirblocklog, dirversion,
> + log_sunit, maxfsb);
> #endif
>
> return maxfsb;
> diff --git a/mkfs/xfs_mkfs.c b/mkfs/xfs_mkfs.c
> index 6e243ab..896351b 100644
> --- a/mkfs/xfs_mkfs.c
> +++ b/mkfs/xfs_mkfs.c
> @@ -922,7 +922,6 @@ main(
> int lssflag;
> int lsu;
> int lsunit;
> - int max_tr_res;
> int min_logblocks;
> xfs_mount_t *mp;
> xfs_mount_t mbuf;
> @@ -2111,50 +2110,6 @@ reported by the device (%u).\n"),
> sectorsize, xi.rtbsize);
> }
>
> - max_tr_res = max_trans_res(crcs_enabled, dirversion,
> - sectorlog, blocklog, inodelog, dirblocklog);
> - ASSERT(max_tr_res);
> - min_logblocks = max_tr_res * XFS_MIN_LOG_FACTOR;
> - min_logblocks = MAX(XFS_MIN_LOG_BLOCKS, min_logblocks);
> - if (!logsize && dblocks >= (1024*1024*1024) >> blocklog)
> - min_logblocks = MAX(min_logblocks, XFS_MIN_LOG_BYTES>>blocklog);
> - if (logsize && xi.logBBsize > 0 && logblocks > DTOBT(xi.logBBsize)) {
> - fprintf(stderr,
> -_("size %s specified for log subvolume is too large, maximum is %lld blocks\n"),
> - logsize, (long long)DTOBT(xi.logBBsize));
> - usage();
> - } else if (!logsize && xi.logBBsize > 0) {
> - logblocks = DTOBT(xi.logBBsize);
> - } else if (logsize && !xi.logdev && !loginternal) {
> - fprintf(stderr,
> - _("size specified for non-existent log subvolume\n"));
> - usage();
> - } else if (loginternal && logsize && logblocks >= dblocks) {
> - fprintf(stderr, _("size %lld too large for internal log\n"),
> - (long long)logblocks);
> - usage();
> - } else if (!loginternal && !xi.logdev) {
> - logblocks = 0;
> - } else if (loginternal && !logsize) {
> - /*
> - * With a 2GB max log size, default to maximum size
> - * at 4TB. This keeps the same ratio from the older
> - * max log size of 128M at 256GB fs size. IOWs,
> - * the ratio of fs size to log size is 2048:1.
> - */
> - logblocks = (dblocks << blocklog) / 2048;
> - logblocks = logblocks >> blocklog;
> - logblocks = MAX(min_logblocks, logblocks);
> - logblocks = MAX(logblocks,
> - MAX(XFS_DFL_LOG_SIZE,
> - max_tr_res * XFS_DFL_LOG_FACTOR));
> - logblocks = MIN(logblocks, XFS_MAX_LOG_BLOCKS);
> - if ((logblocks << blocklog) > XFS_MAX_LOG_BYTES) {
> - logblocks = XFS_MAX_LOG_BYTES >> blocklog;
> - }
> - }
> - validate_log_size(logblocks, blocklog, min_logblocks);
> -
> if (rtsize && xi.rtsize > 0 && rtblocks > DTOBT(xi.rtsize)) {
> fprintf(stderr,
> _("size %s specified for rt subvolume is too large, "
> @@ -2363,6 +2318,60 @@ an AG size that is one stripe unit smaller, for example %llu.\n"),
> fprintf(stderr, _("log stripe unit adjusted to 32KiB\n"));
> }
>
> + min_logblocks = max_trans_res(crcs_enabled, dirversion,
> + sectorlog, blocklog, inodelog, dirblocklog,
> + logversion, lsunit);
> + ASSERT(min_logblocks);
> + min_logblocks = MAX(XFS_MIN_LOG_BLOCKS, min_logblocks);
> + if (!logsize && dblocks >= (1024*1024*1024) >> blocklog)
> + min_logblocks = MAX(min_logblocks, XFS_MIN_LOG_BYTES>>blocklog);
> + if (logsize && xi.logBBsize > 0 && logblocks > DTOBT(xi.logBBsize)) {
> + fprintf(stderr,
> +_("size %s specified for log subvolume is too large, maximum is %lld blocks\n"),
> + logsize, (long long)DTOBT(xi.logBBsize));
> + usage();
> + } else if (!logsize && xi.logBBsize > 0) {
> + logblocks = DTOBT(xi.logBBsize);
> + } else if (logsize && !xi.logdev && !loginternal) {
> + fprintf(stderr,
> + _("size specified for non-existent log subvolume\n"));
> + usage();
> + } else if (loginternal && logsize && logblocks >= dblocks) {
> + fprintf(stderr, _("size %lld too large for internal log\n"),
> + (long long)logblocks);
> + usage();
> + } else if (!loginternal && !xi.logdev) {
> + logblocks = 0;
> + } else if (loginternal && !logsize) {
> + /*
> + * With a 2GB max log size, default to maximum size
> + * at 4TB. This keeps the same ratio from the older
> + * max log size of 128M at 256GB fs size. IOWs,
> + * the ratio of fs size to log size is 2048:1.
> + */
> + logblocks = (dblocks << blocklog) / 2048;
> + logblocks = logblocks >> blocklog;
> + logblocks = MAX(min_logblocks, logblocks);
> +
> + /*
> + * If the default log size doesn't fit in the AG size, use the
> + * minimum log size instead. This ensures small filesystems
> + * don't use excessive amounts of space for the log.
> + */
> + if (min_logblocks * XFS_DFL_LOG_FACTOR >= agsize) {
> + logblocks = min_logblocks;
> + } else {
> + logblocks = MAX(logblocks,
> + MAX(XFS_DFL_LOG_SIZE,
> + min_logblocks * XFS_DFL_LOG_FACTOR));
> + }
> + logblocks = MIN(logblocks, XFS_MAX_LOG_BLOCKS);
> + if ((logblocks << blocklog) > XFS_MAX_LOG_BYTES) {
> + logblocks = XFS_MAX_LOG_BYTES >> blocklog;
> + }
> + }
> + validate_log_size(logblocks, blocklog, min_logblocks);
> +
> protostring = setup_proto(protofile);
> bsize = 1 << (blocklog - BBSHIFT);
> mp = &mbuf;
> @@ -2371,6 +2380,7 @@ an AG size that is one stripe unit smaller, for example %llu.\n"),
> sbp->sb_blocklog = (__uint8_t)blocklog;
> sbp->sb_sectlog = (__uint8_t)sectorlog;
> sbp->sb_agblklog = (__uint8_t)libxfs_log2_roundup((unsigned int)agsize);
> + sbp->sb_agblocks = (xfs_agblock_t)agsize;
> mp->m_blkbb_log = sbp->sb_blocklog - BBSHIFT;
> mp->m_sectbb_log = sbp->sb_sectlog - BBSHIFT;
>
> @@ -2382,6 +2392,9 @@ an AG size that is one stripe unit smaller, for example %llu.\n"),
> if (!logsize) {
> logblocks = MIN(logblocks,
> XFS_ALLOC_AG_MAX_USABLE(mp));
> +
> + /* revalidate the log size is valid if we changed it */
> + validate_log_size(logblocks, blocklog, min_logblocks);
> }
> if (logblocks > agsize - XFS_PREALLOC_BLOCKS(mp)) {
> fprintf(stderr,
> @@ -2389,6 +2402,7 @@ an AG size that is one stripe unit smaller, for example %llu.\n"),
> (long long)logblocks);
> usage();
> }
> +
> if (laflag) {
> if (logagno >= agcount) {
> fprintf(stderr,
> @@ -2457,7 +2471,6 @@ an AG size that is one stripe unit smaller, for example %llu.\n"),
> sbp->sb_logstart = logstart;
> sbp->sb_rootino = sbp->sb_rbmino = sbp->sb_rsumino = NULLFSINO;
> sbp->sb_rextsize = rtextblocks;
> - sbp->sb_agblocks = (xfs_agblock_t)agsize;
> sbp->sb_agcount = (xfs_agnumber_t)agcount;
> sbp->sb_rbmblocks = nbmblocks;
> sbp->sb_logblocks = (xfs_extlen_t)logblocks;
> diff --git a/mkfs/xfs_mkfs.h b/mkfs/xfs_mkfs.h
> index d10e444..1393feb 100644
> --- a/mkfs/xfs_mkfs.h
> +++ b/mkfs/xfs_mkfs.h
> @@ -54,8 +54,7 @@
> #define XFS_MIN_REC_DIRSIZE 12 /* 4096 byte dirblocks (V2) */
> #define XFS_DFL_DIR_VERSION 2 /* default directory version */
> #define XFS_DFL_LOG_SIZE 1000 /* default log size, blocks */
> -#define XFS_MIN_LOG_FACTOR 3 /* min log size factor */
> -#define XFS_DFL_LOG_FACTOR 16 /* default log size, factor */
> +#define XFS_DFL_LOG_FACTOR 5 /* default log size, factor */
> /* with max trans reservation */
> #define XFS_MAX_INODE_SIG_BITS 32 /* most significant bits in an
> * inode number that we'll
> @@ -82,6 +81,7 @@ extern void res_failed (int err);
>
> /* maxtrres.c */
> extern int max_trans_res (int crcs_enabled, int dirversion,
> - int sectorlog, int blocklog, int inodelog, int dirblocklog);
> + int sectorlog, int blocklog, int inodelog, int dirblocklog,
> + int logversion, int log_sunit);
>
> #endif /* __XFS_MKFS_H__ */
>
_______________________________________________
xfs mailing list
xfs@xxxxxxxxxxx
http://oss.sgi.com/mailman/listinfo/xfs
