This stupid patch only put the indentation in place so we will be able
to clearly see and review changes made in the second patch which will
add a loop (instead of allways-true condition introduced in this patch)
adding support for config sections. There are no changes in the logic,
only indentation changes.
Signed-off-by: Lukas Czerner <lczerner@xxxxxxxxxx>
---
check | 314 +++++++++++++++++++++++++++++++++---------------------------------
1 file changed, 157 insertions(+), 157 deletions(-)
diff --git a/check b/check
index 428eba1..677650c 100755
--- a/check
+++ b/check
@@ -356,186 +356,186 @@ END { if (NR > 0) {
trap "_wrapup; exit \$status" 0 1 2 3 15
-mkdir -p $RESULT_BASE
-if [ ! -d $RESULT_BASE ]; then
- echo "failed to create results directory $RESULTS_BASE"
- exit 1;
-fi
+if true; then
+ mkdir -p $RESULT_BASE
+ if [ ! -d $RESULT_BASE ]; then
+ echo "failed to create results directory $RESULTS_BASE"
+ exit 1;
+ fi
-seq="check"
-check="$RESULT_BASE/check"
+ seq="check"
+ check="$RESULT_BASE/check"
# don't leave old full output behind on a clean run
-rm -f $check.full
+ rm -f $check.full
-[ -f $check.time ] || touch $check.time
+ [ -f $check.time ] || touch $check.time
# print out our test configuration
-echo "FSTYP -- `_full_fstyp_details`"
-echo "PLATFORM -- `_full_platform_details`"
-if [ ! -z "$SCRATCH_DEV" ]; then
- echo "MKFS_OPTIONS -- `_scratch_mkfs_options`"
- echo "MOUNT_OPTIONS -- `_scratch_mount_options`"
-fi
-echo
-
-
-if [ ! -z "$SCRATCH_DEV" ]; then
- umount $SCRATCH_DEV 2>/dev/null
- # call the overridden mkfs - make sure the FS is built
- # the same as we'll create it later.
-
- if ! _scratch_mkfs $flag >$tmp.err 2>&1
- then
- echo "our local _scratch_mkfs routine ..."
- cat $tmp.err
- echo "check: failed to mkfs \$SCRATCH_DEV using specified options"
- exit 1
- fi
-
- # call the overridden mount - make sure the FS mounts with
- # the same options that we'll mount with later.
- if ! _scratch_mount >$tmp.err 2>&1
- then
- echo "our local mount routine ..."
- cat $tmp.err
- echo "check: failed to mount \$SCRATCH_DEV using specified options"
- exit 1
- fi
-fi
-
-seqres="$check"
-_check_test_fs
-
-for seq in $list
-do
- err=false
+ echo "FSTYP -- `_full_fstyp_details`"
+ echo "PLATFORM -- `_full_platform_details`"
+ if [ ! -z "$SCRATCH_DEV" ]; then
+ echo "MKFS_OPTIONS -- `_scratch_mkfs_options`"
+ echo "MOUNT_OPTIONS -- `_scratch_mount_options`"
+ fi
+ echo
- # the filename for the test and the name output are different.
- # we don't include the tests/ directory in the name output.
- seqnum=`echo $seq | sed -e "s;$SRC_DIR/;;"`
- # Similarly, the result directory needs to replace the tests/
- # part of the test location.
- group=`dirname $seq`
- export RESULT_DIR=`echo $group | sed -e "s;$SRC_DIR;$RESULT_BASE;"`
- mkdir -p $RESULT_DIR
- seqres="$RESULT_BASE/$seqnum"
+ if [ ! -z "$SCRATCH_DEV" ]; then
+ umount $SCRATCH_DEV 2>/dev/null
+ # call the overridden mkfs - make sure the FS is built
+ # the same as we'll create it later.
- echo -n "$seqnum"
+ if ! _scratch_mkfs $flag >$tmp.err 2>&1
+ then
+ echo "our local _scratch_mkfs routine ..."
+ cat $tmp.err
+ echo "check: failed to mkfs \$SCRATCH_DEV using specified options"
+ exit 1
+ fi
- if $showme
- then
- echo
- continue
- elif [ ! -f $seq ]
- then
- echo " - no such test?"
- else
- # really going to try and run this one
- #
- rm -f $seqres.out.bad
-
- # check if we really should run it
- if [ -s $tmp.xlist ]; then
- if grep $seqnum $tmp.xlist > /dev/null 2>&1 ; then
- echo " [expunged]"
- continue
+ # call the overridden mount - make sure the FS mounts with
+ # the same options that we'll mount with later.
+ if ! _scratch_mount >$tmp.err 2>&1
+ then
+ echo "our local mount routine ..."
+ cat $tmp.err
+ echo "check: failed to mount \$SCRATCH_DEV using specified options"
+ exit 1
fi
fi
- # slashes now in names, sed barfs on them so use grep
- lasttime=`grep -w ^$seqnum $check.time | awk '// {print $2}'`
- if [ "X$lasttime" != X ]; then
- echo -n " ${lasttime}s ..."
- else
- echo -n " " # prettier output with timestamps.
- fi
- rm -f core $seqres.notrun
+ seqres="$check"
+ _check_test_fs
- start=`_wallclock`
- $timestamp && echo -n " ["`date "+%T"`"]"
- [ ! -x $seq ] && chmod u+x $seq # ensure we can run it
- $LOGGER_PROG "run xfstest $seqnum"
- ./$seq >$tmp.rawout 2>&1
- sts=$?
- $timestamp && _timestamp
- stop=`_wallclock`
+ for seq in $list
+ do
+ err=false
- _fix_malloc <$tmp.rawout >$tmp.out
- rm -f $tmp.rawout
+ # the filename for the test and the name output are different.
+ # we don't include the tests/ directory in the name output.
+ seqnum=`echo $seq | sed -e "s;$SRC_DIR/;;"`
- if [ -f core ]
- then
- echo -n " [dumped core]"
- mv core $RESULT_BASE/$seqnum.core
- err=true
- fi
+ # Similarly, the result directory needs to replace the tests/
+ # part of the test location.
+ group=`dirname $seq`
+ export RESULT_DIR=`echo $group | sed -e "s;$SRC_DIR;$RESULT_BASE;"`
+ mkdir -p $RESULT_DIR
+ seqres="$RESULT_BASE/$seqnum"
- if [ -f $seqres.notrun ]
- then
- $timestamp || echo -n " [not run] "
- $timestamp && echo " [not run]" && echo -n " $seqnum -- "
- cat $seqres.notrun
- notrun="$notrun $seqnum"
- else
- if [ $sts -ne 0 ]
- then
- echo -n " [failed, exit status $sts]"
- err=true
- fi
- if [ ! -f $seq.out ]
- then
- echo " - no qualified output"
- err=true
- else
- if diff $seq.out $tmp.out >/dev/null 2>&1
+ echo -n "$seqnum"
+
+ if $showme
+ then
+ echo
+ continue
+ elif [ ! -f $seq ]
then
- if $err
- then
- :
- else
- echo "$seqnum `expr $stop - $start`" >>$tmp.time
- echo -n " `expr $stop - $start`s"
- fi
- echo ""
+ echo " - no such test?"
else
- echo " - output mismatch (see $seqres.out.bad)"
- mv $tmp.out $seqres.out.bad
- $diff $seq.out $seqres.out.bad | {
- if test "$DIFF_LENGTH" -le 0; then
- cat
+ # really going to try and run this one
+ #
+ rm -f $seqres.out.bad
+
+ # check if we really should run it
+ if [ -s $tmp.xlist ]; then
+ if grep $seqnum $tmp.xlist > /dev/null 2>&1 ; then
+ echo " [expunged]"
+ continue
+ fi
+ fi
+
+ # slashes now in names, sed barfs on them so use grep
+ lasttime=`grep -w ^$seqnum $check.time | awk '// {print $2}'`
+ if [ "X$lasttime" != X ]; then
+ echo -n " ${lasttime}s ..."
else
- head -n "$DIFF_LENGTH"
- fi; } | \
- sed -e 's/^\(.\)/ \1/'
- echo " ..."
- echo " (Run '$diff $seq.out $seqres.out.bad' to see the" \
- "entire diff)"
- err=true
- fi
- fi
- fi
+ echo -n " " # prettier output with timestamps.
+ fi
+ rm -f core $seqres.notrun
+
+ start=`_wallclock`
+ $timestamp && echo -n " ["`date "+%T"`"]"
+ [ ! -x $seq ] && chmod u+x $seq # ensure we can run it
+ $LOGGER_PROG "run xfstest $seqnum"
+ ./$seq >$tmp.rawout 2>&1
+ sts=$?
+ $timestamp && _timestamp
+ stop=`_wallclock`
+
+ _fix_malloc <$tmp.rawout >$tmp.out
+ rm -f $tmp.rawout
+
+ if [ -f core ]
+ then
+ echo -n " [dumped core]"
+ mv core $RESULT_BASE/$seqnum.core
+ err=true
+ fi
- fi
+ if [ -f $seqres.notrun ]
+ then
+ $timestamp || echo -n " [not run] "
+ $timestamp && echo " [not run]" && echo -n " $seqnum -- "
+ cat $seqres.notrun
+ notrun="$notrun $seqnum"
+ else
+ if [ $sts -ne 0 ]
+ then
+ echo -n " [failed, exit status $sts]"
+ err=true
+ fi
+ if [ ! -f $seq.out ]
+ then
+ echo " - no qualified output"
+ err=true
+ else
+ if diff $seq.out $tmp.out >/dev/null 2>&1
+ then
+ if $err
+ then
+ :
+ else
+ echo "$seqnum `expr $stop - $start`" >>$tmp.time
+ echo -n " `expr $stop - $start`s"
+ fi
+ echo ""
+ else
+ echo " - output mismatch (see $seqres.out.bad)"
+ mv $tmp.out $seqres.out.bad
+ $diff $seq.out $seqres.out.bad | {
+ if test "$DIFF_LENGTH" -le 0; then
+ cat
+ else
+ head -n "$DIFF_LENGTH"
+ fi; } | \
+ sed -e 's/^\(.\)/ \1/'
+ echo " ..."
+ echo " (Run '$diff $seq.out $seqres.out.bad' to see the entire diff)"
+ err=true
+ fi
+ fi
+ fi
+ fi
- # come here for each test, except when $showme is true
- #
- if $err
- then
- bad="$bad $seqnum"
- n_bad=`expr $n_bad + 1`
- quick=false
- fi
- if [ ! -f $seqres.notrun ]
- then
- try="$try $seqnum"
- n_try=`expr $n_try + 1`
- _check_test_fs
- fi
+ # come here for each test, except when $showme is true
+ #
+ if $err
+ then
+ bad="$bad $seqnum"
+ n_bad=`expr $n_bad + 1`
+ quick=false
+ fi
+ if [ ! -f $seqres.notrun ]
+ then
+ try="$try $seqnum"
+ n_try=`expr $n_try + 1`
+ _check_test_fs
+ fi
- seq="after_$seqnum"
-done
+ seq="after_$seqnum"
+ done
+fi
interrupt=false
status=`expr $n_bad`
--
1.8.3.1
_______________________________________________
xfs mailing list
xfs@xxxxxxxxxxx
http://oss.sgi.com/mailman/listinfo/xfs
