This patch add support for sections in the config file. Each section can
contain configuration options in the format
OPTION=value
when one section is processed xfstests will proceed to next section
until all secitons are processed, or an error occur.
The name of the section can consist of alphanumeric characters + '_',
nothing else is allowed. Name of the section is also used to create
results subdirectory for each section. After all the sections are
processed summary of all runs is printed out.
If the config file does not contain sections, or we're not using config
file at all, nothing is changed and xfstests will work the same way as
it used to.
This is very useful for testing file system with different options. Here
is an example of the config file with sections:
[ext4_4k_block_size]
TEST_DEV=/dev/sda
TEST_DIR=/mnt/test
SCRATCH_DEV=/dev/sdb
SCRATCH_MNT=/mnt/test1
MKFS_OPTIONS="-q -F -b4096"
FSTYP=ext4
[ext4_1k_block_size]
MKFS_OPTIONS="-q -F -b1024"
[ext4_nojournal]
MKFS_OPTIONS="-q -F -b4096 -O ^has_journal"
[ext4_discard_ssd]
MKFS_OPTIONS="-q -F -b4096"
TEST_DEV=/dev/sdc
SCRATCH_DEV=/dev/sdd
MOUNT_OPTIONS="-o discard"
Note that once the variable is set it remains set across the sections, so
you do not have to specify all the options in all sections. However one
have to make sure that unwanted options are not set from previous
sections.
Signed-off-by: Lukas Czerner <lczerner@xxxxxxxxxx>
---
README.config-sections | 50 ++++++++++++++++++++++++++++++++++
check | 73 +++++++++++++++++++++++++++++++++++++++++---------
common/config | 49 +++++++++++++++++++++++++++++++--
3 files changed, 158 insertions(+), 14 deletions(-)
create mode 100644 README.config-sections
diff --git a/README.config-sections b/README.config-sections
new file mode 100644
index 0000000..6d88a6f
--- /dev/null
+++ b/README.config-sections
@@ -0,0 +1,50 @@
+Configuration file with sections
+================================
+
+Configuration file with sections is useful for running xfstests on multiple
+file systems, or multiple file system setups in a single run without any
+help of external scripts.
+
+Syntax for defining a section is the following:
+
+[section_name]
+
+Section name should consist of alphanumeric characters and '_'. Anything
+else is forbidden and the section will not be recognised.
+
+Each section in the configuration file should contain options in the format
+
+OPTION=value
+
+'OPTION' must not contain any white space characters. 'value' can contain
+any character you want with one simple limitation - characters ' and " can
+only appear at the start and end of the 'value', however it is not required.
+
+Note that options are carried between sections so the same options does not
+have to be specified in each and every sections. However caution should be
+exercised not to leave unwanted options set from previous sections.
+
+For every section xfstests will run with specified options and will produce
+separate results in the '$RESULT_BASE/$section_name' directory.
+
+Here is an example of config file with sections:
+
+[ext4_4k_block_size]
+TEST_DEV=/dev/sda
+TEST_DIR=/mnt/test
+SCRATCH_DEV=/dev/sdb
+SCRATCH_MNT=/mnt/test1
+MKFS_OPTIONS="-q -F -b4096"
+FSTYP=ext4
+
+[ext4_1k_block_size]
+MKFS_OPTIONS="-q -F -b1024"
+
+[ext4_nojournal]
+MKFS_OPTIONS="-q -F -b4096 -O ^has_journal"
+
+[ext4_discard_ssd]
+MKFS_OPTIONS="-q -F -b4096"
+TEST_DEV=/dev/sdc
+SCRATCH_DEV=/dev/sdd
+MOUNT_OPTIONS="-o discard"
diff --git a/check b/check
index e1d0af2..b242d5d 100755
--- a/check
+++ b/check
@@ -22,9 +22,11 @@
tmp=/tmp/$$
status=0
needwrap=true
+needsum=true
n_try=0
try=""
n_bad=0
+sum_bad=0
bad=""
notrun=""
interrupt=true
@@ -295,7 +297,12 @@ then
exit 1
fi
-# Ok, time to start running...
+_wipe_counters()
+{
+ n_try="0"
+ n_bad="0"
+ unset try notrun bad
+}
_wrapup()
{
@@ -324,16 +331,20 @@ END { if (NR > 0) {
date >>$check.log
echo $list | fmt | sed -e 's/^/ /' -e "s;$SRC_DIR/;;g" >>$check.log
$interrupt && echo "Interrupted!" >>$check.log
-
+
+ echo "SECTION -- $section" >>$tmp.summary
+ echo "=========================" >>$tmp.summary
if [ ! -z "$n_try" -a $n_try != 0 ]
then
echo "Ran:$try"
+ echo "Ran:$try" >>$tmp.summary
fi
if [ ! -z "$notrun" ]
then
echo "Not run:$notrun"
echo "Not run:$notrun" >>$check.log
+ echo "Not run:$notrun" >>$tmp.summary
fi
if [ ! -z "$n_bad" -a $n_bad != 0 ]
@@ -342,20 +353,48 @@ END { if (NR > 0) {
echo "Failed $n_bad of $n_try tests"
echo "Failures:$bad" | fmt >>$check.log
echo "Failed $n_bad of $n_try tests" >>$check.log
+ echo "Failures:$bad" >>$tmp.summary
+ echo "Failed $n_bad of $n_try tests" >>$tmp.summary
else
echo "Passed all $n_try tests"
echo "Passed all $n_try tests" >>$check.log
+ echo "Passed all $n_try tests" >>$tmp.summary
fi
+ echo "" >>$tmp.summary
needwrap=false
fi
+ sum_bad=`expr $sum_bad + $n_bad`
+ _wipe_counters
rm -f /tmp/*.rawout /tmp/*.out /tmp/*.err /tmp/*.time
- rm -f $tmp.*
+ if ! $OPTIONS_HAVE_SECTIONS; then
+ rm -f $tmp.*
+ fi
}
-trap "_wrapup; exit \$status" 0 1 2 3 15
+_summary()
+{
+ _wrapup
+ if $showme; then
+ :
+ elif $needsum; then
+ count=`wc -L $tmp.summary | cut -f1 -d" "`
+ cat $tmp.summary
+ needsum=false
+ fi
+ rm -f $tmp.*
+}
+
+if $OPTIONS_HAVE_SECTIONS; then
+ trap "_summary; exit \$status" 0 1 2 3 15
+else
+ trap "_wrapup; exit \$status" 0 1 2 3 15
+fi
+
+for section in $HOST_OPTIONS_SECTIONS; do
+ get_next_config $section
+ init_rc
-if true; then
mkdir -p $RESULT_BASE
if [ ! -d $RESULT_BASE ]; then
echo "failed to create results directory $RESULTS_BASE"
@@ -365,12 +404,15 @@ if true; then
seq="check"
check="$RESULT_BASE/check"
-# don't leave old full output behind on a clean run
+ # don't leave old full output behind on a clean run
rm -f $check.full
[ -f $check.time ] || touch $check.time
-# print out our test configuration
+ # print out our test configuration
+ if $OPTIONS_HAVE_SECTIONS; then
+ echo "SECTION -- $section"
+ fi
echo "FSTYP -- `_full_fstyp_details`"
echo "PLATFORM -- `_full_platform_details`"
if [ ! -z "$SCRATCH_DEV" ]; then
@@ -378,7 +420,7 @@ if true; then
echo "MOUNT_OPTIONS -- `_scratch_mount_options`"
fi
echo
-
+ needwrap=true
if [ ! -z "$SCRATCH_DEV" ]; then
umount $SCRATCH_DEV 2>/dev/null
@@ -418,9 +460,14 @@ if true; then
# Similarly, the result directory needs to replace the tests/
# part of the test location.
group=`dirname $seq`
- export RESULT_DIR=`echo $group | sed -e "s;$SRC_DIR;$RESULT_BASE;"`
+ if $OPTIONS_HAVE_SECTIONS; then
+ export RESULT_DIR=`echo $group | sed -e "s;$SRC_DIR;${RESULT_BASE}/$section;"`
+ seqres="$RESULT_BASE/$section/$seqnum"
+ else
+ export RESULT_DIR=`echo $group | sed -e "s;$SRC_DIR;$RESULT_BASE;"`
+ seqres="$RESULT_BASE/$seqnum"
+ fi
mkdir -p $RESULT_DIR
- seqres="$RESULT_BASE/$seqnum"
echo -n "$seqnum"
@@ -534,8 +581,10 @@ if true; then
seq="after_$seqnum"
done
-fi
+ _wrapup
+ echo
+done
interrupt=false
-status=`expr $n_bad`
+status=`expr $sum_bad`
exit
diff --git a/common/config b/common/config
index 39dd469..8011ec4 100644
--- a/common/config
+++ b/common/config
@@ -221,15 +221,57 @@ known_hosts()
[ -f $HOST_CONFIG_DIR/$HOST.config ] && export HOST_OPTIONS=$HOST_CONFIG_DIR/$HOST.config
}
+# Returns a list of sections in config file
+# Each section starts with the section name in the format
+# [section_name1]. Only alphanumeric characters and '_' is allowed
+# in the section name otherwise the section will not be resognised.
+# Section name must be contained between square brackets.
+get_config_sections() {
+ sed -n -e "s/^\[\([[:alnum:]_]*\)\]/\1/p" < $1
+}
+
if [ ! -f "$HOST_OPTIONS" ]; then
known_hosts
fi
+export HOST_OPTIONS_SECTIONS="-no-sections-"
+export OPTIONS_HAVE_SECTIONS=false
if [ -f "$HOST_OPTIONS" ]; then
- . $HOST_OPTIONS
+ export HOST_OPTIONS_SECTIONS=`get_config_sections $HOST_OPTIONS`
+ if [ -z "$HOST_OPTIONS_SECTIONS" ]; then
+ . $HOST_OPTIONS
+ export HOST_OPTIONS_SECTIONS="-no-sections-"
+ else
+ export OPTIONS_HAVE_SECTIONS=true
+ fi
fi
+# Parse config section options. This function will parse all the configuration
+# within a single section which name is passed as an argument. For section
+# name format see comments in get_config_sections().
+# Empty lines and everything after '#' will be ignored.
+# Configuration options should be defined in the format
+#
+# CONFIG_OPTION=value
+#
+# This 'CONFIG_OPTION' variable and will be exported as an environment variable.
+parse_config_section() {
+ SECTION=$1
+ if ! $OPTIONS_HAVE_SECTIONS; then
+ return 0
+ fi
+ eval `sed -e 's/[[:space:]]*\=[[:space:]]*/=/g' \
+ -e 's/#.*$//' \
+ -e 's/[[:space:]]*$//' \
+ -e 's/^[[:space:]]*//' \
+ -e "s/^\(.*\)=\"\?'\?\([^\"']*\)\"\?'\?$/export \1=\"\2\"/" \
+ < $HOST_OPTIONS \
+ | sed -n -e "/^\[$SECTION\]/,/^\s*\[/{/^[^#].*\=.*/p;}"`
+}
+
get_next_config() {
+ parse_config_section $1
+
# set default RESULT_BASE
if [ -z "$RESULT_BASE" ]; then
export RESULT_BASE="$here/results/"
@@ -282,7 +324,10 @@ get_next_config() {
fi
}
-get_next_config
+if [ -z "$CONFIG_INCLUDED" ]; then
+ get_next_config `echo $HOST_OPTIONS_SECTIONS | cut -f1 -d" "`
+ export CONFIG_INCLUDED=true
+fi
# make sure this script returns success
/bin/true
--
1.8.3.1
_______________________________________________
xfs mailing list
xfs@xxxxxxxxxxx
http://oss.sgi.com/mailman/listinfo/xfs
