From: Phil White <pwhite@xxxxxxx>
This is a rebasing & resubmit of a dchinner patch. His comments on the
original:
-----------------
Essentially the change is simply this. Converting:
... >> $seq.????
to:
.... >> $RESULT_DIR/$seq.????
so that output files are directed to the defined output directory.
sed to the rescue:
$ sed -i -e '/^seq=.*$/a seqres=$RESULT_DIR/$seq' -e 's/seq.full/seqres.full/' t
ests/*/*
will do most of the work automatically.
-----------------
Please carefully review these changes in particular.
Signed-off-by: Phil White <pwhite@xxxxxxx>
---
tests/btrfs/254 | 1 +
tests/btrfs/264 | 1 +
tests/btrfs/265 | 1 +
tests/btrfs/276 | 27 ++++++++++++++-------------
tests/btrfs/284 | 1 +
tests/ext4/271 | 3 ++-
tests/ext4/301 | 5 +++--
tests/ext4/302 | 5 +++--
tests/ext4/303 | 5 +++--
tests/ext4/304 | 5 +++--
tests/generic/001 | 9 +++++----
tests/generic/002 | 1 +
tests/generic/005 | 1 +
tests/generic/006 | 1 +
tests/generic/007 | 1 +
tests/generic/010 | 5 +++--
tests/generic/011 | 7 ++++---
tests/generic/013 | 21 +++++++++++----------
tests/generic/014 | 1 +
tests/generic/015 | 9 +++++----
tests/generic/020 | 9 +++++----
tests/generic/053 | 1 +
tests/generic/062 | 15 ++++++++-------
tests/generic/069 | 13 +++++++------
tests/generic/070 | 3 ++-
tests/generic/074 | 11 ++++++-----
tests/generic/075 | 7 ++++---
tests/generic/076 | 15 ++++++++-------
tests/generic/077 | 21 +++++++++++----------
tests/generic/079 | 1 +
tests/generic/083 | 15 ++++++++-------
tests/generic/088 | 3 ++-
tests/generic/089 | 7 ++++---
tests/generic/091 | 9 +++++----
tests/generic/093 | 3 ++-
tests/generic/097 | 3 ++-
tests/generic/099 | 3 ++-
tests/generic/100 | 11 ++++++-----
tests/generic/105 | 11 ++++++-----
tests/generic/112 | 7 ++++---
tests/generic/113 | 1 +
tests/generic/117 | 15 ++++++++-------
tests/generic/120 | 1 +
tests/generic/123 | 1 +
tests/generic/124 | 1 +
tests/generic/125 | 1 +
tests/generic/126 | 1 +
tests/generic/127 | 1 +
tests/generic/128 | 1 +
tests/generic/129 | 1 +
tests/generic/130 | 1 +
tests/generic/131 | 1 +
tests/generic/132 | 1 +
tests/generic/133 | 1 +
tests/generic/135 | 1 +
tests/generic/141 | 1 +
tests/generic/169 | 15 ++++++++-------
tests/generic/184 | 1 +
tests/generic/192 | 9 +++++----
tests/generic/193 | 3 ++-
tests/generic/198 | 3 ++-
tests/generic/204 | 5 +++--
tests/generic/207 | 1 +
tests/generic/208 | 1 +
tests/generic/209 | 1 +
tests/generic/210 | 1 +
tests/generic/211 | 1 +
tests/generic/212 | 1 +
tests/generic/213 | 3 ++-
tests/generic/214 | 3 ++-
tests/generic/215 | 3 ++-
tests/generic/219 | 15 ++++++++-------
tests/generic/221 | 1 +
tests/generic/223 | 13 +++++++------
tests/generic/224 | 7 ++++---
tests/generic/225 | 3 ++-
tests/generic/226 | 9 +++++----
tests/generic/228 | 3 ++-
tests/generic/230 | 41 +++++++++++++++++++++--------------------
tests/generic/231 | 9 +++++----
tests/generic/232 | 11 ++++++-----
tests/generic/233 | 11 ++++++-----
tests/generic/234 | 7 ++++---
tests/generic/235 | 13 +++++++------
tests/generic/236 | 1 +
tests/generic/237 | 3 ++-
tests/generic/239 | 1 +
tests/generic/240 | 3 ++-
tests/generic/241 | 5 +++--
tests/generic/245 | 1 +
tests/generic/246 | 1 +
tests/generic/247 | 1 +
tests/generic/248 | 1 +
tests/generic/249 | 7 ++++---
tests/generic/251 | 1 +
tests/generic/255 | 1 +
tests/generic/256 | 1 +
tests/generic/257 | 3 ++-
tests/generic/258 | 1 +
tests/generic/260 | 1 +
tests/generic/263 | 9 +++++----
tests/generic/269 | 7 ++++---
tests/generic/270 | 7 ++++---
tests/generic/273 | 7 ++++---
tests/generic/274 | 41 +++++++++++++++++++++--------------------
tests/generic/275 | 27 ++++++++++++++-------------
tests/generic/277 | 1 +
tests/generic/280 | 5 +++--
tests/generic/285 | 3 ++-
tests/generic/286 | 35 ++++++++++++++++++-----------------
tests/generic/288 | 1 +
tests/generic/294 | 1 +
tests/generic/299 | 7 ++++---
tests/generic/300 | 5 +++--
tests/shared/051 | 3 ++-
tests/shared/068 | 29 +++++++++++++++--------------
tests/shared/218 | 15 ++++++++-------
tests/shared/243 | 23 ++++++++++++-----------
tests/shared/272 | 15 ++++++++-------
tests/shared/289 | 13 +++++++------
tests/shared/298 | 1 +
tests/shared/305 | 15 ++++++++-------
tests/udf/098 | 3 ++-
tests/udf/101 | 1 +
tests/udf/102 | 1 +
tests/xfs/003 | 1 +
tests/xfs/004 | 17 +++++++++--------
tests/xfs/008 | 1 +
tests/xfs/009 | 1 +
tests/xfs/012 | 1 +
tests/xfs/016 | 35 ++++++++++++++++++-----------------
tests/xfs/017 | 31 ++++++++++++++++---------------
tests/xfs/018 | 3 ++-
tests/xfs/019 | 3 ++-
tests/xfs/021 | 5 +++--
tests/xfs/022 | 1 +
tests/xfs/023 | 1 +
tests/xfs/024 | 5 +++--
tests/xfs/025 | 1 +
tests/xfs/026 | 1 +
tests/xfs/027 | 1 +
tests/xfs/028 | 3 ++-
tests/xfs/029 | 1 +
tests/xfs/030 | 1 +
tests/xfs/031 | 13 +++++++------
tests/xfs/032 | 15 ++++++++-------
tests/xfs/033 | 1 +
tests/xfs/034 | 13 +++++++------
tests/xfs/035 | 1 +
tests/xfs/036 | 1 +
tests/xfs/037 | 1 +
tests/xfs/038 | 1 +
tests/xfs/039 | 1 +
tests/xfs/040 | 7 ++++---
tests/xfs/041 | 5 +++--
tests/xfs/042 | 7 ++++---
tests/xfs/043 | 1 +
tests/xfs/044 | 1 +
tests/xfs/045 | 1 +
tests/xfs/046 | 1 +
tests/xfs/047 | 3 ++-
tests/xfs/048 | 1 +
tests/xfs/049 | 53 +++++++++++++++++++++++++++--------------------------
tests/xfs/050 | 31 ++++++++++++++++---------------
tests/xfs/052 | 19 ++++++++++---------
tests/xfs/054 | 7 ++++---
tests/xfs/055 | 1 +
tests/xfs/056 | 1 +
tests/xfs/057 | 1 +
tests/xfs/058 | 1 +
tests/xfs/059 | 1 +
tests/xfs/060 | 1 +
tests/xfs/061 | 1 +
tests/xfs/063 | 1 +
tests/xfs/064 | 9 +++++----
tests/xfs/065 | 1 +
tests/xfs/066 | 1 +
tests/xfs/067 | 9 +++++----
tests/xfs/071 | 17 +++++++++--------
tests/xfs/072 | 3 ++-
tests/xfs/073 | 1 +
tests/xfs/078 | 1 +
tests/xfs/080 | 1 +
tests/xfs/081 | 3 ++-
tests/xfs/082 | 3 ++-
tests/xfs/084 | 1 +
tests/xfs/085 | 11 ++++++-----
tests/xfs/086 | 13 +++++++------
tests/xfs/087 | 17 +++++++++--------
tests/xfs/090 | 1 +
tests/xfs/092 | 1 +
tests/xfs/094 | 1 +
tests/xfs/095 | 1 +
tests/xfs/096 | 5 +++--
tests/xfs/103 | 1 +
tests/xfs/104 | 17 +++++++++--------
tests/xfs/106 | 5 +++--
tests/xfs/107 | 5 +++--
tests/xfs/108 | 15 ++++++++-------
tests/xfs/109 | 3 ++-
tests/xfs/110 | 1 +
tests/xfs/111 | 1 +
tests/xfs/114 | 31 ++++++++++++++++---------------
tests/xfs/115 | 11 ++++++-----
tests/xfs/116 | 1 +
tests/xfs/118 | 3 ++-
tests/xfs/119 | 1 +
tests/xfs/121 | 17 +++++++++--------
tests/xfs/122 | 7 ++++---
tests/xfs/134 | 5 +++--
tests/xfs/136 | 1 +
tests/xfs/137 | 1 +
tests/xfs/138 | 1 +
tests/xfs/139 | 1 +
tests/xfs/140 | 1 +
tests/xfs/142 | 1 +
tests/xfs/143 | 1 +
tests/xfs/144 | 1 +
tests/xfs/145 | 1 +
tests/xfs/146 | 1 +
tests/xfs/147 | 1 +
tests/xfs/148 | 1 +
tests/xfs/149 | 13 +++++++------
tests/xfs/150 | 1 +
tests/xfs/151 | 3 ++-
tests/xfs/152 | 1 +
tests/xfs/153 | 1 +
tests/xfs/154 | 1 +
tests/xfs/155 | 1 +
tests/xfs/156 | 5 +++--
tests/xfs/157 | 1 +
tests/xfs/158 | 1 +
tests/xfs/159 | 1 +
tests/xfs/160 | 1 +
tests/xfs/161 | 1 +
tests/xfs/162 | 1 +
tests/xfs/163 | 1 +
tests/xfs/164 | 5 +++--
tests/xfs/165 | 7 ++++---
tests/xfs/166 | 5 +++--
tests/xfs/167 | 5 +++--
tests/xfs/168 | 5 +++--
tests/xfs/170 | 3 ++-
tests/xfs/171 | 3 ++-
tests/xfs/172 | 3 ++-
tests/xfs/173 | 3 ++-
tests/xfs/174 | 3 ++-
tests/xfs/175 | 3 ++-
tests/xfs/176 | 3 ++-
tests/xfs/177 | 1 +
tests/xfs/178 | 1 +
tests/xfs/179 | 1 +
tests/xfs/180 | 1 +
tests/xfs/181 | 17 +++++++++--------
tests/xfs/182 | 1 +
tests/xfs/183 | 1 +
tests/xfs/185 | 1 +
tests/xfs/186 | 7 ++++---
tests/xfs/187 | 5 +++--
tests/xfs/188 | 3 ++-
tests/xfs/189 | 3 ++-
tests/xfs/190 | 13 +++++++------
tests/xfs/191 | 5 +++--
tests/xfs/194 | 19 ++++++++++---------
tests/xfs/195 | 3 ++-
tests/xfs/196 | 3 ++-
tests/xfs/197 | 3 ++-
tests/xfs/199 | 3 ++-
tests/xfs/200 | 3 ++-
tests/xfs/201 | 3 ++-
tests/xfs/202 | 3 ++-
tests/xfs/203 | 3 ++-
tests/xfs/205 | 7 ++++---
tests/xfs/206 | 3 ++-
tests/xfs/216 | 1 +
tests/xfs/217 | 1 +
tests/xfs/220 | 1 +
tests/xfs/222 | 3 ++-
tests/xfs/227 | 25 +++++++++++++------------
tests/xfs/229 | 1 +
tests/xfs/238 | 1 +
tests/xfs/242 | 1 +
tests/xfs/244 | 17 +++++++++--------
tests/xfs/250 | 1 +
tests/xfs/252 | 1 +
tests/xfs/253 | 1 +
tests/xfs/259 | 1 +
tests/xfs/266 | 1 +
tests/xfs/267 | 1 +
tests/xfs/268 | 1 +
tests/xfs/278 | 25 +++++++++++++------------
tests/xfs/279 | 11 ++++++-----
tests/xfs/281 | 1 +
tests/xfs/282 | 5 +++--
tests/xfs/283 | 5 +++--
tests/xfs/287 | 19 ++++++++++---------
tests/xfs/290 | 1 +
tests/xfs/291 | 19 ++++++++++---------
tests/xfs/292 | 1 +
tests/xfs/293 | 1 +
tests/xfs/295 | 7 ++++---
tests/xfs/296 | 3 ++-
tests/xfs/297 | 15 ++++++++-------
303 files changed, 1009 insertions(+), 706 deletions(-)
diff --git a/tests/btrfs/254 b/tests/btrfs/254
index 73089d1..ec3d2c5 100755
--- a/tests/btrfs/254
+++ b/tests/btrfs/254
@@ -23,6 +23,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
diff --git a/tests/btrfs/264 b/tests/btrfs/264
index a589c7c..46a4926 100755
--- a/tests/btrfs/264
+++ b/tests/btrfs/264
@@ -23,6 +23,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
diff --git a/tests/btrfs/265 b/tests/btrfs/265
index f28d4e5..760f383 100755
--- a/tests/btrfs/265
+++ b/tests/btrfs/265
@@ -22,6 +22,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
diff --git a/tests/btrfs/276 b/tests/btrfs/276
index 29f721f..2b34fa8 100755
--- a/tests/btrfs/276
+++ b/tests/btrfs/276
@@ -26,6 +26,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
@@ -54,7 +55,7 @@ _require_nobigloopfs
_require_btrfs inspect-internal
_require_command "/usr/sbin/filefrag"
-rm -f $seq.full
+rm -f $seqres.full
FILEFRAG_FILTER='if (/, blocksize (\d+)/) {$blocksize = $1; next} ($ext, '\
'$logical, $physical, $expected, $length, $flags) = (/^\s*(\d+)\s+(\d+)'\
@@ -68,18 +69,18 @@ FILEFRAG_FILTER='if (/, blocksize (\d+)/) {$blocksize = $1; next} ($ext, '\
# sample output: "1234#10#5678" -> physical 1234, length 10, logical 5678
_filter_extents()
{
- tee -a $seq.full | $PERL_PROG -ne "$FILEFRAG_FILTER"
+ tee -a $seqres.full | $PERL_PROG -ne "$FILEFRAG_FILTER"
}
_check_file_extents()
{
cmd="filefrag -v $1"
- echo "# $cmd" >> $seq.full
+ echo "# $cmd" >> $seqres.full
out=`$cmd | _filter_extents`
if [ -z "$out" ]; then
return 1
fi
- echo "after filter: $out" >> $seq.full
+ echo "after filter: $out" >> $seqres.full
echo $out
return 0
}
@@ -95,9 +96,9 @@ _btrfs_inspect_addr()
expect_inum=$4
file=$5
cmd="$BTRFS_UTIL_PROG inspect-internal logical-resolve -P $addr $mp"
- echo "# $cmd" >> $seq.full
+ echo "# $cmd" >> $seqres.full
out=`$cmd`
- echo "$out" >> $seq.full
+ echo "$out" >> $seqres.full
grep_expr="inode $expect_inum offset $expect_addr root"
echo "$out" | grep "^$grep_expr 5$" >/dev/null
ret=$?
@@ -128,9 +129,9 @@ _btrfs_inspect_inum()
snap_name=$3
mp="$SCRATCH_MNT/$snap_name"
cmd="$BTRFS_UTIL_PROG inspect-internal inode-resolve $inum $mp"
- echo "# $cmd" >> $seq.full
+ echo "# $cmd" >> $seqres.full
out=`$cmd`
- echo "$out" >> $seq.full
+ echo "$out" >> $seqres.full
grep_expr="^$file$"
cnt=`echo "$out" | grep "$grep_expr" | wc -l`
if [ $cnt -ge "1" ]; then
@@ -151,9 +152,9 @@ _btrfs_inspect_check()
logical=$4
snap_name=$5
cmd="stat -c %i $file"
- echo "# $cmd" >> $seq.full
+ echo "# $cmd" >> $seqres.full
inum=`$cmd`
- echo "$inum" >> $seq.full
+ echo "$inum" >> $seqres.full
_btrfs_inspect_addr $SCRATCH_MNT $physical $logical $inum $file
ret=$?
if [ $ret -eq 0 ]; then
@@ -171,9 +172,9 @@ workout()
snap_name=$4
umount $SCRATCH_DEV >/dev/null 2>&1
- echo "*** mkfs -dsize=$fsz" >>$seq.full
- echo "" >>$seq.full
- _scratch_mkfs_sized $fsz >>$seq.full 2>&1 \
+ echo "*** mkfs -dsize=$fsz" >>$seqres.full
+ echo "" >>$seqres.full
+ _scratch_mkfs_sized $fsz >>$seqres.full 2>&1 \
|| _fail "size=$fsz mkfs failed"
run_check _scratch_mount
# -w ensures that the only ops are ones which cause write I/O
diff --git a/tests/btrfs/284 b/tests/btrfs/284
index b86ef32..24b831a 100644
--- a/tests/btrfs/284
+++ b/tests/btrfs/284
@@ -22,6 +22,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here="`pwd`"
tmp=/tmp/$$
diff --git a/tests/ext4/271 b/tests/ext4/271
index 50b4c0b..6a0e7b1 100755
--- a/tests/ext4/271
+++ b/tests/ext4/271
@@ -23,6 +23,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
@@ -40,7 +41,7 @@ _supported_os Linux
_need_to_be_root
_require_scratch
-_scratch_mkfs_sized $((128 * 1024 * 1024)) >> $seq.full 2>&1
+_scratch_mkfs_sized $((128 * 1024 * 1024)) >> $seqres.full 2>&1
# -onoload and EXT4_SYNC_FL on file is important becase result in
# metadata sync writes inside ext4_handle_dirty_metadata()
diff --git a/tests/ext4/301 b/tests/ext4/301
index fe2e59f..54909b6 100644
--- a/tests/ext4/301
+++ b/tests/ext4/301
@@ -25,6 +25,7 @@
owner=dmonakhov@xxxxxxxxxx
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
@@ -103,13 +104,13 @@ _workout()
echo ""
echo " Start defragment activity"
echo ""
- cat $tmp-$seq.fio >> $seq.full
+ cat $tmp-$seq.fio >> $seqres.full
run_check $FIO_PROG $tmp-$seq.fio
}
_require_fio $tmp-$seq.fio
-_scratch_mkfs >> $seq.full 2>&1
+_scratch_mkfs >> $seqres.full 2>&1
_scratch_mount
if ! _workout; then
diff --git a/tests/ext4/302 b/tests/ext4/302
index e3dceb8..d338e56 100644
--- a/tests/ext4/302
+++ b/tests/ext4/302
@@ -26,6 +26,7 @@
owner=dmonakhov@xxxxxxxxxx
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
@@ -119,13 +120,13 @@ _workout()
echo ""
echo " Start defragment activity"
echo ""
- cat $tmp-$seq.fio >> $seq.full
+ cat $tmp-$seq.fio >> $seqres.full
run_check $FIO_PROG $tmp-$seq.fio
}
_require_fio $tmp-$seq.fio
-_scratch_mkfs >> $seq.full 2>&1
+_scratch_mkfs >> $seqres.full 2>&1
_scratch_mount
if ! _workout; then
diff --git a/tests/ext4/303 b/tests/ext4/303
index 4141442..c21211a 100644
--- a/tests/ext4/303
+++ b/tests/ext4/303
@@ -26,6 +26,7 @@
owner=dmonakhov@xxxxxxxxxx
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
@@ -129,13 +130,13 @@ _workout()
echo ""
echo " Start defragment activity"
echo ""
- cat $tmp-$seq.fio >> $seq.full
+ cat $tmp-$seq.fio >> $seqres.full
run_check $FIO_PROG $tmp-$seq.fio
}
_require_fio $tmp-$seq.fio
-_scratch_mkfs >> $seq.full 2>&1
+_scratch_mkfs >> $seqres.full 2>&1
_scratch_mount
if ! _workout; then
diff --git a/tests/ext4/304 b/tests/ext4/304
index 5c414bd..66cc862 100644
--- a/tests/ext4/304
+++ b/tests/ext4/304
@@ -27,6 +27,7 @@
owner=dmonakhov@xxxxxxxxxx
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
@@ -106,13 +107,13 @@ _workout()
echo ""
echo " Start defragment activity"
echo ""
- cat $tmp-$seq.fio >> $seq.full
+ cat $tmp-$seq.fio >> $seqres.full
run_check $FIO_PROG $tmp-$seq.fio
}
_require_fio $tmp-$seq.fio
-_scratch_mkfs >> $seq.full 2>&1
+_scratch_mkfs >> $seqres.full 2>&1
_scratch_mount
if ! _workout; then
diff --git a/tests/generic/001 b/tests/generic/001
index b9997f3..a6659ab 100755
--- a/tests/generic/001
+++ b/tests/generic/001
@@ -32,6 +32,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
# get standard environment, filters and checks
@@ -189,7 +190,7 @@ _mark_iteration()
#
_chain()
{
- $AWK_PROG -v full_file=$here/$seq.full -v verify=$verify <$tmp.config '
+ $AWK_PROG -v full_file=$here/$seqres.full -v verify=$verify <$tmp.config '
BEGIN { nfile = 0 }
/^\#/ { next }
{ file[nfile] = $1
@@ -237,7 +238,7 @@ END { srand('$iter')
}
}
}' \
- | tee -a $here/$seq.full | sh
+ | tee -a $here/$seqres.full | sh
}
_check()
@@ -291,7 +292,7 @@ _cleanup()
fi
}
-rm -f $here/$seq.full
+rm -f $here/$seqres.full
status=0
_cleanup
status=1
@@ -305,7 +306,7 @@ _setup
for iter in 1 2 3 4 5
do
echo -n "iter $iter chain ... "
- echo "iter $iter" >> $here/$seq.full
+ echo "iter $iter" >> $here/$seqres.full
_chain
_check
if [ -f $tmp.bad ]
diff --git a/tests/generic/002 b/tests/generic/002
index db63fa0..ba1a5cf 100755
--- a/tests/generic/002
+++ b/tests/generic/002
@@ -23,6 +23,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
# get standard environment, filters and checks
diff --git a/tests/generic/005 b/tests/generic/005
index 27da3d3..ba28502 100755
--- a/tests/generic/005
+++ b/tests/generic/005
@@ -33,6 +33,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
diff --git a/tests/generic/006 b/tests/generic/006
index 1437b46..9949d84 100755
--- a/tests/generic/006
+++ b/tests/generic/006
@@ -23,6 +23,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
diff --git a/tests/generic/007 b/tests/generic/007
index 2bb981f..2d026a3 100755
--- a/tests/generic/007
+++ b/tests/generic/007
@@ -26,6 +26,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
diff --git a/tests/generic/010 b/tests/generic/010
index 245f407..3587f21 100755
--- a/tests/generic/010
+++ b/tests/generic/010
@@ -23,6 +23,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
@@ -59,11 +60,11 @@ _supported_os IRIX Linux
_setup_testdir
-rm -f $seq.full
+rm -f $seqres.full
cd $testdir
-$here/src/dbtest -l 5 -n 1000 2>&1 | tee -a $here/$seq.full | _filter_dbtest
+$here/src/dbtest -l 5 -n 1000 2>&1 | tee -a $here/$seqres.full | _filter_dbtest
# success, all done
exit
diff --git a/tests/generic/011 b/tests/generic/011
index 4ede2d8..e5c6bbf 100755
--- a/tests/generic/011
+++ b/tests/generic/011
@@ -23,6 +23,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
out=""
@@ -51,7 +52,7 @@ _setup_testdir
out=$testdir/dirstress.$$
-rm -f $seq.full
+rm -f $seqres.full
_test()
{
@@ -63,8 +64,8 @@ _test()
if ! $here/src/dirstress -d $out -f $count $args >$tmp.out 2>&1
then
echo " dirstress failed"
- echo "*** TEST $test -d $out -f $count $args" >>$seq.full
- cat $tmp.out >>$seq.full
+ echo "*** TEST $test -d $out -f $count $args" >>$seqres.full
+ cat $tmp.out >>$seqres.full
status=1
fi
}
diff --git a/tests/generic/013 b/tests/generic/013
index 0879a2a..984ed09 100755
--- a/tests/generic/013
+++ b/tests/generic/013
@@ -23,6 +23,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
@@ -73,15 +74,15 @@ _do_test()
echo "fsstress.$_n : $_param"
echo "-----------------------------------------------"
# -m limits number of users/groups so check doesn't fail (malloc) later
- dbgoutfile=$seq.full
+ dbgoutfile=$seqres.full
if ! $FSSTRESS_PROG $_param $FSSTRESS_AVOID -v -m 8 -n $_count -d $out >>$dbgoutfile 2>&1
then
- echo " fsstress (count=$_count) returned $? - see $seq.full"
- echo "--------------------------------------" >>$here/$seq.full
- echo "$_n - output from fsstress:" >>$here/$seq.full
- echo "--------------------------------------" >>$here/$seq.full
- echo "<NOT LOGGED>" >>$here/$seq.full
- #cat $tmp.out >>$here/$seq.full
+ echo " fsstress (count=$_count) returned $? - see $seqres.full"
+ echo "--------------------------------------" >>$here/$seqres.full
+ echo "$_n - output from fsstress:" >>$here/$seqres.full
+ echo "--------------------------------------" >>$here/$seqres.full
+ echo "<NOT LOGGED>" >>$here/$seqres.full
+ #cat $tmp.out >>$here/$seqres.full
status=1
fi
@@ -95,7 +96,7 @@ _supported_os IRIX Linux
_setup_testdir
-rm -f $here/$seq.full
+rm -f $here/$seqres.full
echo "brevity is wit..."
count=1000
@@ -115,8 +116,8 @@ _do_test 2 "-p $procs -r" $count
_do_test 3 "-p 4 -z -f rmdir=10 -f link=10 -f creat=10 -f mkdir=10 -f rename=30 -f stat=30 -f unlink=30 -f truncate=20" $count
-# if all ok by here then probably don't need $seq.full
-rm -f $seq.full
+# if all ok by here then probably don't need $seqres.full
+rm -f $seqres.full
exit
diff --git a/tests/generic/014 b/tests/generic/014
index 93caaa6..096e4e5 100755
--- a/tests/generic/014
+++ b/tests/generic/014
@@ -23,6 +23,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
diff --git a/tests/generic/015 b/tests/generic/015
index 62392c6..952b2a0 100755
--- a/tests/generic/015
+++ b/tests/generic/015
@@ -23,6 +23,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
@@ -56,7 +57,7 @@ _scratch_mkfs_sized `expr 50 \* 1024 \* 1024` >/dev/null 2>&1 \
|| _fail "mkfs failed"
_scratch_mount || _fail "mount failed"
out=$SCRATCH_MNT/fillup.$$
-rm -f $seq.full
+rm -f $seqres.full
free0=`_free`
if [ -z "$free0" ]
@@ -64,7 +65,7 @@ then
echo " *** failed to get free space (0)"
exit 1
fi
-echo "free space at start $free0" >> $seq.full
+echo "free space at start $free0" >> $seqres.full
echo "fill disk:" # well, filesystem really - not disk
@@ -78,7 +79,7 @@ then
echo " *** failed to get free space (1)"
exit 1
fi
-echo "free space after fill $free1" >> $seq.full
+echo "free space after fill $free1" >> $seqres.full
if [ ! -e $out ]
then
@@ -116,7 +117,7 @@ then
echo " *** failed to get free space (2)"
exit 1
fi
-echo "free space after delete $free2" >> $seq.full
+echo "free space after delete $free2" >> $seqres.full
echo -n " !!! "
_within_tolerance "free space" $free2 $free0 1% -v
diff --git a/tests/generic/020 b/tests/generic/020
index 2bd1d9f..42465d8 100755
--- a/tests/generic/020
+++ b/tests/generic/020
@@ -23,6 +23,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
@@ -85,7 +86,7 @@ _require_attrs
_setup_testdir
-rm -f $seq.full
+rm -f $seqres.full
testfile=$testdir/attribute_$$
@@ -120,7 +121,7 @@ v=0
while [ $v -lt $MAX_ATTRS ]
do
- echo -n "value_$v" | attr -s "attribute_$v" $testfile >>$seq.full
+ echo -n "value_$v" | attr -s "attribute_$v" $testfile >>$seqres.full
if [ $? -ne 0 ]
then
echo "!!! failed to add \"attribute_$v\""
@@ -133,7 +134,7 @@ done
echo "*** check"
# don't print it all out...
getfattr --absolute-names $testfile \
- | tee -a $seq.full \
+ | tee -a $seqres.full \
| $AWK_PROG '
/^#/ { next }
/^[ ]*$/ { next }
@@ -145,7 +146,7 @@ echo "*** remove lots of attributes"
v=0
while [ $v -lt $MAX_ATTRS ]
do
- if ! $ATTR_PROG -r "attribute_$v" $testfile >>$seq.full
+ if ! $ATTR_PROG -r "attribute_$v" $testfile >>$seqres.full
then
echo "!!! failed to remove \"attribute_$v\""
exit 1
diff --git a/tests/generic/053 b/tests/generic/053
index 388c9b4..99dd1b0 100755
--- a/tests/generic/053
+++ b/tests/generic/053
@@ -23,6 +23,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
diff --git a/tests/generic/062 b/tests/generic/062
index 5a6081e..27907a9 100755
--- a/tests/generic/062
+++ b/tests/generic/062
@@ -24,6 +24,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
@@ -75,7 +76,7 @@ _supported_os Linux
_require_scratch
_require_attrs
-rm -f $tmp.backup1 $tmp.backup2 $seq.full
+rm -f $tmp.backup1 $tmp.backup2 $seqres.full
# real QA test starts here
_scratch_mkfs > /dev/null 2>&1 || _fail "mkfs failed"
@@ -181,8 +182,8 @@ _backup()
{
# NB: no filtering of scratch here... (need to restore too)
$GETFATTR_PROG --absolute-names -dh -R -m '.' $SCRATCH_MNT >$1
- echo BACKUP $1 >>$seq.full
- cat $1 >> $seq.full
+ echo BACKUP $1 >>$seqres.full
+ cat $1 >> $seqres.full
[ ! -s $1 ] && echo "warning: $1 (backup file) is empty"
}
@@ -191,8 +192,8 @@ _backup $tmp.backup1
echo "*** clear out the scratch device"
rm -fr $SCRATCH_MNT/*
-echo "AFTER REMOVE" >>$seq.full
-getfattr -L -R -m '.' $SCRATCH_MNT >>$seq.full
+echo "AFTER REMOVE" >>$seqres.full
+getfattr -L -R -m '.' $SCRATCH_MNT >>$seqres.full
echo "*** reset test bed with no extended attributes"
_create_test_bed
@@ -202,8 +203,8 @@ echo "*** restore everything"
setfattr -h --restore=$tmp.backup1
_backup $tmp.backup2
-echo "AFTER RESTORE" >>$seq.full
-getfattr -L -R -m '.' $SCRATCH_MNT >>$seq.full
+echo "AFTER RESTORE" >>$seqres.full
+getfattr -L -R -m '.' $SCRATCH_MNT >>$seqres.full
echo "*** compare before and after backups"
diff $tmp.backup1 $tmp.backup2
diff --git a/tests/generic/069 b/tests/generic/069
index 3451715..b2b18a9 100755
--- a/tests/generic/069
+++ b/tests/generic/069
@@ -23,6 +23,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
@@ -39,7 +40,7 @@ _supported_fs generic
_supported_os IRIX Linux
_require_scratch
-rm -f $seq.full
+rm -f $seqres.full
umount $SCRATCH_DEV >/dev/null 2>&1
@@ -60,19 +61,19 @@ done
cd $here
wait
-ls -lh $SCRATCH_MNT >> $seq.full
-echo "*** PIDs file" >> $seq.full
-cat $SCRATCH_MNT/pids >> $seq.full
+ls -lh $SCRATCH_MNT >> $seqres.full
+echo "*** PIDs file" >> $seqres.full
+cat $SCRATCH_MNT/pids >> $seqres.full
cat $SCRATCH_MNT/pids | while read pid size
do
echo "*** checking file with $size integers"
- echo checking pid=$pid size=$size >> $seq.full
+ echo checking pid=$pid size=$size >> $seqres.full
$here/src/append_reader $SCRATCH_MNT/testfile.$pid
status=$?
[ $status -ne 0 ] && \
echo "maybe corrupt O_APPEND to $SCRATCH_MOUNT/testfile.$pid!"
- echo status: $status >> $seq.full
+ echo status: $status >> $seqres.full
done
# success, all done
diff --git a/tests/generic/070 b/tests/generic/070
index 02fe142..a1c5bf5 100755
--- a/tests/generic/070
+++ b/tests/generic/070
@@ -23,6 +23,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
@@ -61,7 +62,7 @@ FSSTRESS_ARGS=`_scale_fsstress_args \
-f attr_set=100 \
-f attr_remove=100 \
-p 1 -n 10000 -S c`
-$FSSTRESS_PROG $FSSTRESS_ARGS >$seq.full 2>&1
+$FSSTRESS_PROG $FSSTRESS_ARGS >$seqres.full 2>&1
status=$?
exit
diff --git a/tests/generic/074 b/tests/generic/074
index 0e5e820..c795dc7 100755
--- a/tests/generic/074
+++ b/tests/generic/074
@@ -23,6 +23,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
@@ -64,9 +65,9 @@ _do_test()
echo "-----------------------------------------------"
echo "fstest.$_n : $_filter_param"
echo "-----------------------------------------------"
- if ! $here/src/fstest $_param -p $out >>$seq.full
+ if ! $here/src/fstest $_param -p $out >>$seqres.full
then
- echo " fstest ($_param) returned $? - see $seq.full"
+ echo " fstest ($_param) returned $? - see $seqres.full"
status=1
exit
fi
@@ -107,7 +108,7 @@ _process_args()
# real QA test starts here
-rm -f $here/$seq.full
+rm -f $here/$seqres.full
_supported_fs generic
_supported_os IRIX Linux
@@ -153,8 +154,8 @@ fi
# can override the params here
_process_args "$@"
-echo "Params are for $param_type" >>$seq.full
-echo "Params: n = $numchildren l = $numloops f = $numfiles" >>$seq.full
+echo "Params are for $param_type" >>$seqres.full
+echo "Params: n = $numchildren l = $numloops f = $numfiles" >>$seqres.full
_setup_testdir
diff --git a/tests/generic/075 b/tests/generic/075
index de581b6..8012cc1 100755
--- a/tests/generic/075
+++ b/tests/generic/075
@@ -23,6 +23,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
@@ -133,12 +134,12 @@ numops2=10000
# can override the params here
_process_args "$@"
-echo "Params are for $param_type" >>$seq.full
-echo "Params: n = $numops1 N = $numops2 l = $filelen" >>$seq.full
+echo "Params are for $param_type" >>$seqres.full
+echo "Params: n = $numops1 N = $numops2 l = $filelen" >>$seqres.full
_setup_testdir
-rm -f $here/$seq.full
+rm -f $here/$seqres.full
echo "brevity is wit..."
_check_test_fs
diff --git a/tests/generic/076 b/tests/generic/076
index 11a0792..a1847fc 100755
--- a/tests/generic/076
+++ b/tests/generic/076
@@ -23,6 +23,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
@@ -58,13 +59,13 @@ _require_scratch
echo "*** init fs"
-rm -f $seq.full
+rm -f $seqres.full
umount $SCRATCH_DEV >/dev/null 2>&1
-echo "*** MKFS ***" >>$seq.full
-echo "" >>$seq.full
-_scratch_mkfs >>$seq.full 2>&1 \
+echo "*** MKFS ***" >>$seqres.full
+echo "" >>$seqres.full
+_scratch_mkfs >>$seqres.full 2>&1 \
|| _fail "mkfs failed"
-_scratch_mount >>$seq.full 2>&1 \
+_scratch_mount >>$seqres.full 2>&1 \
|| _fail "mount failed"
echo "*** test concurrent block/fs access"
@@ -73,8 +74,8 @@ cat $SCRATCH_DEV >/dev/null &
pid=$!
FSSTRESS_ARGS=`_scale_fsstress_args -p 2 -n 2000 $FSSTRESS_AVOID`
-echo "run fsstress with args: $FSSTRESS_ARGS" >>$seq.full
-$FSSTRESS_PROG $FSSTRESS_ARGS >>$seq.full
+echo "run fsstress with args: $FSSTRESS_ARGS" >>$seqres.full
+$FSSTRESS_PROG $FSSTRESS_ARGS >>$seqres.full
_lets_get_pidst
_check_scratch_fs
diff --git a/tests/generic/077 b/tests/generic/077
index 2b86a37..3113119 100755
--- a/tests/generic/077
+++ b/tests/generic/077
@@ -23,6 +23,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
@@ -56,29 +57,29 @@ _require_user
echo "*** create filesystem"
-rm -f $seq.full
+rm -f $seqres.full
umount $SCRATCH_DEV >/dev/null 2>&1
-echo "*** MKFS ***" >>$seq.full
-echo "" >>$seq.full
+echo "*** MKFS ***" >>$seqres.full
+echo "" >>$seqres.full
SIZE=`expr 50 \* 1024 \* 1024`
-_scratch_mkfs_sized $SIZE >>$seq.full 2>&1 \
+_scratch_mkfs_sized $SIZE >>$seqres.full 2>&1 \
|| _fail "mkfs failed"
-_scratch_mount >>$seq.full 2>&1 \
+_scratch_mount >>$seqres.full 2>&1 \
|| _fail "mount failed"
mkdir $SCRATCH_MNT/subdir
echo "*** set default ACL"
setfacl -R -dm u:fsgqa:rwx,g::rwx,o::r-x,m::rwx $SCRATCH_MNT/subdir
-echo "*** populate filesystem, pass #1" | tee -a $seq.full
-cp -rf $filler $SCRATCH_MNT/subdir >$seq.full 2>&1
+echo "*** populate filesystem, pass #1" | tee -a $seqres.full
+cp -rf $filler $SCRATCH_MNT/subdir >$seqres.full 2>&1
-echo "*** populate filesystem, pass #2" | tee -a $seq.full
-cp -rf $filler $SCRATCH_MNT/subdir >$seq.full 2>&1
+echo "*** populate filesystem, pass #2" | tee -a $seqres.full
+cp -rf $filler $SCRATCH_MNT/subdir >$seqres.full 2>&1
_check_scratch_fs
echo "*** all done"
-rm -f $seq.full
+rm -f $seqres.full
status=0
exit
diff --git a/tests/generic/079 b/tests/generic/079
index 048b220..3faf106 100755
--- a/tests/generic/079
+++ b/tests/generic/079
@@ -23,6 +23,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
diff --git a/tests/generic/083 b/tests/generic/083
index 5b7f0bc..e5735c3 100755
--- a/tests/generic/083
+++ b/tests/generic/083
@@ -33,6 +33,7 @@
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
@@ -58,7 +59,7 @@ _supported_os IRIX Linux
_require_scratch
_require_nobigloopfs
-rm -f $seq.full
+rm -f $seqres.full
workout()
{
@@ -68,22 +69,22 @@ workout()
nops=$4
umount $SCRATCH_DEV >/dev/null 2>&1
- echo "*** mkfs -dsize=$fsz,agcount=$ags" >>$seq.full
- echo "" >>$seq.full
+ echo "*** mkfs -dsize=$fsz,agcount=$ags" >>$seqres.full
+ echo "" >>$seqres.full
if [ $FSTYP = xfs ]
then
- _scratch_mkfs_xfs -dsize=$fsz,agcount=$ags >>$seq.full 2>&1 \
+ _scratch_mkfs_xfs -dsize=$fsz,agcount=$ags >>$seqres.full 2>&1 \
|| _fail "size=$fsz,agcount=$ags mkfs failed"
else
- _scratch_mkfs_sized $fsz >>$seq.full 2>&1 \
+ _scratch_mkfs_sized $fsz >>$seqres.full 2>&1 \
|| _fail "size=$fsz mkfs failed"
fi
- _scratch_mount >>$seq.full 2>&1 \
+ _scratch_mount >>$seqres.full 2>&1 \
|| _fail "mount failed"
# -w ensures that the only ops are ones which cause write I/O
FSSTRESS_ARGS=`_scale_fsstress_args -d $SCRATCH_MNT -w -p $procs -n $nops $FSSTRESS_AVOID`
- $FSSTRESS_PROG $FSSTRESS_ARGS >>$seq.full
+ $FSSTRESS_PROG $FSSTRESS_ARGS >>$seqres.full
_check_scratch_fs
}
diff --git a/tests/generic/088 b/tests/generic/088
index b6266ef..1386322 100755
--- a/tests/generic/088
+++ b/tests/generic/088
@@ -24,6 +24,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
@@ -48,7 +49,7 @@ _supported_fs generic
_supported_os IRIX Linux
path=$TEST_DIR/t_access
-src/t_access_root $path | tee $seq.full | _filter
+src/t_access_root $path | tee $seqres.full | _filter
# success, all done
status=0
diff --git a/tests/generic/089 b/tests/generic/089
index 2653183..5e8210d 100755
--- a/tests/generic/089
+++ b/tests/generic/089
@@ -24,6 +24,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
mtab_output=$TEST_DIR/mtab_output
@@ -51,7 +52,7 @@ addentries()
_supported_fs generic
_supported_os Linux
-rm -f $seq.full
+rm -f $seqres.full
[ "X$TEST_DIR" = "X" ] && exit 1
cd $TEST_DIR
rm -fr test
@@ -72,8 +73,8 @@ mtab()
echo directory entries:
ls | grep mtab
- echo directory entries >> $here/$seq.full
- ls -li >> $here/$seq.full
+ echo directory entries >> $here/$seqres.full
+ ls -li >> $here/$seqres.full
}
# directory with only a few entries
diff --git a/tests/generic/091 b/tests/generic/091
index ad82b8e..755281e 100755
--- a/tests/generic/091
+++ b/tests/generic/091
@@ -23,6 +23,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
@@ -38,16 +39,16 @@ trap "rm -f $tmp.*; exit \$status" 0 1 2 3 15
_supported_fs generic
_supported_os Linux
-rm -f $seq.full
+rm -f $seqres.full
run_fsx()
{
- echo fsx $@ | tee -a $seq.full
+ echo fsx $@ | tee -a $seqres.full
args=`echo $@ | sed -e "s/ BSIZE / $bsize /g" -e "s/ PSIZE / $psize /g"`
rm -f $TEST_DIR/junk
- $here/ltp/fsx $args $TEST_DIR/junk >>$seq.full 2>&1
+ $here/ltp/fsx $args $TEST_DIR/junk >>$seqres.full 2>&1
if [ $? -ne 0 ]; then
- cat $seq.full
+ cat $seqres.full
exit 1
fi
}
diff --git a/tests/generic/093 b/tests/generic/093
index 881a833..12ef580 100755
--- a/tests/generic/093
+++ b/tests/generic/093
@@ -26,6 +26,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
here=`pwd`
tmp=/tmp/$$
@@ -62,7 +63,7 @@ _require_attrs
[ -x $runas ] || _notrun "$runas executable not found"
-rm -f $seq.full
+rm -f $seqres.full
_setup_testdir
_need_to_be_root
diff --git a/tests/generic/097 b/tests/generic/097
index d3174e4..60f7e4d 100755
--- a/tests/generic/097
+++ b/tests/generic/097
@@ -28,6 +28,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
@@ -250,7 +251,7 @@ _check_scratch_fs
# optional stuff if your test has verbose output to help resolve problems
#echo
-#echo "If failure, check $seq.full (this) and $seq.full.ok (reference)"
+#echo "If failure, check $seqres.full (this) and $seqres.full.ok (reference)"
# success, all done
status=0
diff --git a/tests/generic/099 b/tests/generic/099
index edd88a9..6efa7a7 100755
--- a/tests/generic/099
+++ b/tests/generic/099
@@ -24,6 +24,7 @@
# modifier
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
@@ -72,7 +73,7 @@ _cleanup()
# -> this would be done by simultaneously matching on ACEs
# -> interesting if it allows user to specify ACEs in any order
#
-rm -f $seq.full
+rm -f $seqres.full
#-------------------------------------------------------
# real QA test starts here
diff --git a/tests/generic/100 b/tests/generic/100
index 1ba5eb7..34cfde7 100755
--- a/tests/generic/100
+++ b/tests/generic/100
@@ -24,6 +24,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
@@ -54,17 +55,17 @@ DEPTH=5
POPULATED_DIR=$TEMP_DIR/populate_root
SIZE=10
-rm -f $seq.full
+rm -f $seqres.full
# Clean up if file exist from prevous run
rm -rf $POPULATED_DIR
rm -f $TEMP_DIR/$TAR_FILE
# Create the new directory structure
-_populate_fs -n $NDIRS -f $NFILES -d $DEPTH -r $POPULATED_DIR -s $SIZE >>$here/$seq.full 2>&1
+_populate_fs -n $NDIRS -f $NFILES -d $DEPTH -r $POPULATED_DIR -s $SIZE >>$here/$seqres.full 2>&1
# Then tar up the directory structure
-tar -cvf $TEMP_DIR/$TAR_FILE $POPULATED_DIR >>$here/$seq.full 2>&1
+tar -cvf $TEMP_DIR/$TAR_FILE $POPULATED_DIR >>$here/$seqres.full 2>&1
# create f/s
_require_scratch
@@ -72,12 +73,12 @@ _setup_testdir
# untar on f/s
cd $testdir
-tar -xRvf $TEMP_DIR/$TAR_FILE >>$here/$seq.full 2>&1
+tar -xRvf $TEMP_DIR/$TAR_FILE >>$here/$seqres.full 2>&1
cd $here
# use diff -qr to compare
-ls -R -l ${testdir}${POPULATED_DIR} >>$here/$seq.full 2>&1
+ls -R -l ${testdir}${POPULATED_DIR} >>$here/$seqres.full 2>&1
diff -qr $POPULATED_DIR ${testdir}${POPULATED_DIR}
cd /
diff --git a/tests/generic/105 b/tests/generic/105
index 01bae98..d5b2cb2 100755
--- a/tests/generic/105
+++ b/tests/generic/105
@@ -26,6 +26,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
@@ -49,7 +50,7 @@ _supported_os IRIX Linux
# real QA test starts here
-rm -f $seq.full
+rm -f $seqres.full
_require_scratch
_require_acls
@@ -57,11 +58,11 @@ _require_acls
_acl_setup_ids
umount $SCRATCH_DEV >/dev/null 2>&1
-echo "*** MKFS ***" >>$seq.full
-echo "" >>$seq.full
-_scratch_mkfs >>$seq.full 2>&1 \
+echo "*** MKFS ***" >>$seqres.full
+echo "" >>$seqres.full
+_scratch_mkfs >>$seqres.full 2>&1 \
|| _fail "mkfs failed"
-_scratch_mount >>$seq.full 2>&1 \
+_scratch_mount >>$seqres.full 2>&1 \
|| _fail "mount failed"
cd $SCRATCH_MNT
diff --git a/tests/generic/112 b/tests/generic/112
index bcdcfec..8959c8b 100755
--- a/tests/generic/112
+++ b/tests/generic/112
@@ -23,6 +23,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
@@ -134,12 +135,12 @@ numops2=10000
# can override the params here
_process_args "$@"
-echo "Params are for $param_type" >>$seq.full
-echo "Params: n = $numops1 N = $numops2 l = $filelen" >>$seq.full
+echo "Params are for $param_type" >>$seqres.full
+echo "Params: n = $numops1 N = $numops2 l = $filelen" >>$seqres.full
_setup_testdir
-rm -f $here/$seq.full
+rm -f $here/$seqres.full
echo "brevity is wit..."
_check_test_fs
diff --git a/tests/generic/113 b/tests/generic/113
index fd301cd..b2a7317 100755
--- a/tests/generic/113
+++ b/tests/generic/113
@@ -23,6 +23,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
diff --git a/tests/generic/117 b/tests/generic/117
index 8afc962..624bfd8 100755
--- a/tests/generic/117
+++ b/tests/generic/117
@@ -24,6 +24,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
@@ -82,13 +83,13 @@ _setup_testdir
_require_scratch
_require_attrs
-rm -f $seq.full
+rm -f $seqres.full
umount $SCRATCH_DEV >/dev/null 2>&1
-echo "*** MKFS ***" >>$seq.full
-echo "" >>$seq.full
-_scratch_mkfs >>$seq.full 2>&1 \
+echo "*** MKFS ***" >>$seqres.full
+echo "" >>$seqres.full
+_scratch_mkfs >>$seqres.full 2>&1 \
|| _fail "mkfs failed"
-_scratch_mount >>$seq.full 2>&1 \
+_scratch_mount >>$seqres.full 2>&1 \
|| _fail "mount failed"
mkdir -p $SCRATCH_MNT/fsstress
@@ -97,10 +98,10 @@ echo
echo Running fsstress in serial:
i=0
while [ $i -lt $ITERATIONS ]; do
- echo fsstress iteration: $i | tee -a $seq.full
+ echo fsstress iteration: $i | tee -a $seqres.full
$FSSTRESS_PROG \
-d $SCRATCH_MNT/fsstress \
- $fss_ops -S c >>$seq.full 2>&1
+ $fss_ops -S c >>$seqres.full 2>&1
let i=$i+1
done
diff --git a/tests/generic/120 b/tests/generic/120
index 8389925..c3069f1 100755
--- a/tests/generic/120
+++ b/tests/generic/120
@@ -23,6 +23,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
diff --git a/tests/generic/123 b/tests/generic/123
index d45c516..2387676 100755
--- a/tests/generic/123
+++ b/tests/generic/123
@@ -24,6 +24,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
diff --git a/tests/generic/124 b/tests/generic/124
index 6fbb028..65c94b4 100755
--- a/tests/generic/124
+++ b/tests/generic/124
@@ -27,6 +27,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
diff --git a/tests/generic/125 b/tests/generic/125
index c7215a3..f489e96 100755
--- a/tests/generic/125
+++ b/tests/generic/125
@@ -23,6 +23,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
diff --git a/tests/generic/126 b/tests/generic/126
index a95c1e4..83671df 100755
--- a/tests/generic/126
+++ b/tests/generic/126
@@ -23,6 +23,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
diff --git a/tests/generic/127 b/tests/generic/127
index d1101df..021a571 100755
--- a/tests/generic/127
+++ b/tests/generic/127
@@ -27,6 +27,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
diff --git a/tests/generic/128 b/tests/generic/128
index 85d0f45..165aa00 100755
--- a/tests/generic/128
+++ b/tests/generic/128
@@ -23,6 +23,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
diff --git a/tests/generic/129 b/tests/generic/129
index 18d891b..e74098f 100755
--- a/tests/generic/129
+++ b/tests/generic/129
@@ -23,6 +23,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
diff --git a/tests/generic/130 b/tests/generic/130
index 943df72..96491f7 100755
--- a/tests/generic/130
+++ b/tests/generic/130
@@ -32,6 +32,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
diff --git a/tests/generic/131 b/tests/generic/131
index 176c8b4..02835ab 100755
--- a/tests/generic/131
+++ b/tests/generic/131
@@ -23,6 +23,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
diff --git a/tests/generic/132 b/tests/generic/132
index 98229a9..2abfccf 100755
--- a/tests/generic/132
+++ b/tests/generic/132
@@ -24,6 +24,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
diff --git a/tests/generic/133 b/tests/generic/133
index ec225f3..478419c 100755
--- a/tests/generic/133
+++ b/tests/generic/133
@@ -23,6 +23,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
diff --git a/tests/generic/135 b/tests/generic/135
index f0bf9b9..b5854f4 100755
--- a/tests/generic/135
+++ b/tests/generic/135
@@ -23,6 +23,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
diff --git a/tests/generic/141 b/tests/generic/141
index 45c1b5e..cb7aae2 100755
--- a/tests/generic/141
+++ b/tests/generic/141
@@ -23,6 +23,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
diff --git a/tests/generic/169 b/tests/generic/169
index 413a86b..6293654 100755
--- a/tests/generic/169
+++ b/tests/generic/169
@@ -23,11 +23,12 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
tmp=/tmp/$$
-rm -f $seq.full
+rm -f $seqres.full
status=1 # failure is the default!
trap "_cleanup; exit \$status" 0 1 2 3 15
@@ -56,10 +57,10 @@ _supported_os Linux
_require_scratch
-_scratch_mkfs >>$seq.full 2>&1 \
+_scratch_mkfs >>$seqres.full 2>&1 \
|| _fail "mkfs scratch failed"
-_scratch_mount >>$seq.full 2>&1 \
+_scratch_mount >>$seqres.full 2>&1 \
|| _fail "mount failed: $MOUNT_OPTIONS"
echo "# creating new file for io"
@@ -73,11 +74,11 @@ xfs_io -F -a -c "pwrite 0 5k" -c "fsync" \
| _show_wrote_and_stat_only
echo "# unmounting scratch"
-umount $SCRATCH_MNT>>$seq.full 2>&1 \
+umount $SCRATCH_MNT>>$seqres.full 2>&1 \
|| _fail "unmount failed"
echo "# mounting scratch"
-_scratch_mount >>$seq.full 2>&1 \
+_scratch_mount >>$seqres.full 2>&1 \
|| _fail "mount failed: $MOUNT_OPTIONS"
echo "# stating file to confirm correct size"
@@ -90,11 +91,11 @@ xfs_io -F -f -c "pwrite 0 5" -c s -c "pwrite 5 5" \
| _show_wrote_and_stat_only
echo "# unmounting scratch"
-umount $SCRATCH_MNT>>$seq.full 2>&1 \
+umount $SCRATCH_MNT>>$seqres.full 2>&1 \
|| _fail "unmount failed"
echo "# mounting scratch"
-_scratch_mount >>$seq.full 2>&1 \
+_scratch_mount >>$seqres.full 2>&1 \
|| _fail "mount failed: $MOUNT_OPTIONS"
echo "# stating file to confirm correct size"
diff --git a/tests/generic/184 b/tests/generic/184
index a37f700..929e0eb 100755
--- a/tests/generic/184
+++ b/tests/generic/184
@@ -23,6 +23,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq - silence is golden"
here=`pwd`
diff --git a/tests/generic/192 b/tests/generic/192
index 691ab7d..4b9d0bb 100755
--- a/tests/generic/192
+++ b/tests/generic/192
@@ -25,6 +25,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
@@ -53,20 +54,20 @@ delay=40
testfile=$TEST_DIR/testfile
rm -f $testfile
-rm -f $seq.full
+rm -f $seqres.full
echo test >$testfile
-time1=`_access_time $testfile | tee -a $seq.full`
+time1=`_access_time $testfile | tee -a $seqres.full`
echo "sleep for $delay"
sleep $delay # sleep to allow time to move on for access
cat $testfile
-time2=`_access_time $testfile | tee -a $seq.full`
+time2=`_access_time $testfile | tee -a $seqres.full`
cd /
umount $TEST_DIR
_test_mount
-time3=`_access_time $testfile | tee -a $here/$seq.full`
+time3=`_access_time $testfile | tee -a $here/$seqres.full`
delta1=`expr $time2 - $time1`
delta2=`expr $time3 - $time1`
diff --git a/tests/generic/193 b/tests/generic/193
index 88ab971..8b3b9db 100755
--- a/tests/generic/193
+++ b/tests/generic/193
@@ -22,6 +22,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
@@ -247,5 +248,5 @@ _cleanup_files
# success, all done
echo "*** done"
-rm -f $seq.full
+rm -f $seqres.full
status=0
diff --git a/tests/generic/198 b/tests/generic/198
index 31de96c..5aac37f 100755
--- a/tests/generic/198
+++ b/tests/generic/198
@@ -23,6 +23,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
@@ -47,7 +48,7 @@ _require_aiodio aiodio_sparse2
echo "Silence is golden."
# real QA test starts here
-rm -f $seq.full
+rm -f $seqres.full
rm -f "$TEST_DIR/aiodio_sparse*"
$AIO_TEST "$TEST_DIR/aiodio_sparse"
diff --git a/tests/generic/204 b/tests/generic/204
index 6c4a3f0..ae87930 100755
--- a/tests/generic/204
+++ b/tests/generic/204
@@ -22,6 +22,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
@@ -44,7 +45,7 @@ _scratch_mount
# fix the reserve block pool to a known size so that the enospc calculations
# work out correctly.
-_scratch_resvblks 1024 > $seq.full 2>&1
+_scratch_resvblks 1024 > $seqres.full 2>&1
for i in `seq 1 22500`; do
echo -n > $SCRATCH_MNT/$i
@@ -53,5 +54,5 @@ done
# success, all done
echo "*** done"
-rm -f $seq.full
+rm -f $seqres.full
status=0
diff --git a/tests/generic/207 b/tests/generic/207
index 6eaf50c..b520bee 100755
--- a/tests/generic/207
+++ b/tests/generic/207
@@ -22,6 +22,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
diff --git a/tests/generic/208 b/tests/generic/208
index 7ea7514..4c34e7b 100755
--- a/tests/generic/208
+++ b/tests/generic/208
@@ -22,6 +22,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
diff --git a/tests/generic/209 b/tests/generic/209
index 8b2a4e1..82d5e6a 100755
--- a/tests/generic/209
+++ b/tests/generic/209
@@ -22,6 +22,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
diff --git a/tests/generic/210 b/tests/generic/210
index 56ac8ad..16908cc 100755
--- a/tests/generic/210
+++ b/tests/generic/210
@@ -22,6 +22,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
diff --git a/tests/generic/211 b/tests/generic/211
index 5667d20..6d7b996 100755
--- a/tests/generic/211
+++ b/tests/generic/211
@@ -22,6 +22,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
diff --git a/tests/generic/212 b/tests/generic/212
index e211cc4..6e86e94 100755
--- a/tests/generic/212
+++ b/tests/generic/212
@@ -23,6 +23,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
diff --git a/tests/generic/213 b/tests/generic/213
index e297fdf..1fa573c 100755
--- a/tests/generic/213
+++ b/tests/generic/213
@@ -26,6 +26,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
_cleanup()
@@ -51,7 +52,7 @@ _supported_os Linux
[ -n "$XFS_IO_PROG" ] || _notrun "xfs_io executable not found"
-rm -f $seq.full
+rm -f $seqres.full
_require_xfs_io_falloc
diff --git a/tests/generic/214 b/tests/generic/214
index 682cfca..bcd75f8 100755
--- a/tests/generic/214
+++ b/tests/generic/214
@@ -23,6 +23,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
_cleanup()
@@ -49,7 +50,7 @@ _supported_os Linux
[ -n "$XFS_IO_PROG" ] || _notrun "xfs_io executable not found"
-rm -f $seq.full
+rm -f $seqres.full
rm -f $TEST_DIR/ouch*
_require_xfs_io_falloc
diff --git a/tests/generic/215 b/tests/generic/215
index 749b27b..73cdd14 100755
--- a/tests/generic/215
+++ b/tests/generic/215
@@ -24,6 +24,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
_cleanup()
@@ -79,5 +80,5 @@ fi
# success, all done
echo "*** done"
-rm -f $seq.full
+rm -f $seqres.full
status=0
diff --git a/tests/generic/219 b/tests/generic/219
index 3f4ec09..b71d13d 100755
--- a/tests/generic/219
+++ b/tests/generic/219
@@ -26,6 +26,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
@@ -78,17 +79,17 @@ check_usage()
test_accounting()
{
echo "### some controlled buffered, direct and mmapd IO (type=$type)"
- echo "--- initiating parallel IO..." >>$seq.full
+ echo "--- initiating parallel IO..." >>$seqres.full
# Small ios here because ext3 will account for indirect blocks too ...
# 48k will fit w/o indirect for 4k blocks (default blocksize)
$XFS_IO_PROG -F -c 'pwrite 0 48k' -c 'fsync' \
- $SCRATCH_MNT/buffer >>$seq.full 2>&1 &
+ $SCRATCH_MNT/buffer >>$seqres.full 2>&1 &
$XFS_IO_PROG -F -c 'pwrite 0 48k' -d \
- $SCRATCH_MNT/direct >>$seq.full 2>&1 &
+ $SCRATCH_MNT/direct >>$seqres.full 2>&1 &
$XFS_IO_PROG -F -c 't 48k' -c 'mm -rw 0 48k' -c 'mw 0 48k' -c 'ms -s' \
- $SCRATCH_MNT/mmap >>$seq.full 2>&1 &
+ $SCRATCH_MNT/mmap >>$seqres.full 2>&1 &
wait
- echo "--- completed parallel IO ($type)" >>$seq.full
+ echo "--- completed parallel IO ($type)" >>$seqres.full
for file in $SCRATCH_MNT/{buffer,direct,mmap}; do
$here/src/lstat64 $file | head -2 | _filter_scratch
@@ -103,10 +104,10 @@ test_accounting()
}
# real QA test starts here
-rm -f $seq.full
+rm -f $seqres.full
umount $SCRATCH_DEV 2>/dev/null
-_scratch_mkfs >> $seq.full 2>&1
+_scratch_mkfs >> $seqres.full 2>&1
_scratch_mount "-o usrquota,grpquota"
quotacheck -u -g $SCRATCH_MNT 2>/dev/null
quotaon $SCRATCH_MNT 2>/dev/null
diff --git a/tests/generic/221 b/tests/generic/221
index 9cab3c4..7fca5bb 100755
--- a/tests/generic/221
+++ b/tests/generic/221
@@ -26,6 +26,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
diff --git a/tests/generic/223 b/tests/generic/223
index 8eba2d7..a6932da 100755
--- a/tests/generic/223
+++ b/tests/generic/223
@@ -23,6 +23,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
@@ -47,7 +48,7 @@ _supported_os Linux
_require_scratch
_require_xfs_io_falloc
-rm -f $seq.full
+rm -f $seqres.full
BLOCKSIZE=4096
@@ -57,7 +58,7 @@ for SUNIT_K in 8 16 32 64 128; do
echo "=== mkfs with su $SUNIT_BLOCKS blocks x 4 ==="
export MKFS_OPTIONS=""
- _scratch_mkfs_geom $SUNIT_BYTES 4 $BLOCKSIZE >> $seq.full 2>&1
+ _scratch_mkfs_geom $SUNIT_BYTES 4 $BLOCKSIZE >> $seqres.full 2>&1
_scratch_mount
for SIZE_MULT in 1 2 8 64 256; do
@@ -67,10 +68,10 @@ for SUNIT_K in 8 16 32 64 128; do
for FILE in 1 2 3 4; do
xfs_io -F -f -c "falloc 0 $SIZE" \
$SCRATCH_MNT/file-$FILE-$SIZE-falloc \
- >> $seq.full 2>&1
+ >> $seqres.full 2>&1
xfs_io -F -f -c "pwrite 0 $SIZE" \
$SCRATCH_MNT/file-$FILE-$SIZE-write \
- >> $seq.full 2>&1
+ >> $seqres.full 2>&1
src/t_stripealign $SCRATCH_MNT/file-$FILE-$SIZE-falloc \
$SUNIT_BLOCKS | _filter_scratch
src/t_stripealign $SCRATCH_MNT/file-$FILE-$SIZE-write \
@@ -80,7 +81,7 @@ for SUNIT_K in 8 16 32 64 128; do
echo "=== Testing size 1g falloc on ${SUNIT_K}k stripe ==="
xfs_io -F -f -c "falloc 0 1g" \
- $SCRATCH_MNT/file-1g-falloc >> $seq.full 2>&1
+ $SCRATCH_MNT/file-1g-falloc >> $seqres.full 2>&1
src/t_stripealign $SCRATCH_MNT/file-1g-falloc $SUNIT_BLOCKS \
| _filter_scratch
@@ -88,7 +89,7 @@ for SUNIT_K in 8 16 32 64 128; do
echo "=== Testing size 1073745920 falloc on ${SUNIT_K}k stripe ==="
xfs_io -F -f -c "falloc 0 1073745920" \
- $SCRATCH_MNT/file-1073745920-falloc >> $seq.full 2>&1
+ $SCRATCH_MNT/file-1073745920-falloc >> $seqres.full 2>&1
src/t_stripealign $SCRATCH_MNT/file-1073745920-falloc \
$SUNIT_BLOCKS | _filter_scratch
diff --git a/tests/generic/224 b/tests/generic/224
index 23ee7c2..313d9c2 100755
--- a/tests/generic/224
+++ b/tests/generic/224
@@ -28,6 +28,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
@@ -53,12 +54,12 @@ _supported_os Linux
_require_scratch
# make a 1GB filesystem
-_scratch_mkfs_sized `expr 1024 \* 1024 \* 1024` > $seq.full 2>&1
-_scratch_mount >> $seq.full 2>&1
+_scratch_mkfs_sized `expr 1024 \* 1024 \* 1024` > $seqres.full 2>&1
+_scratch_mount >> $seqres.full 2>&1
# set the reserved block pool to almost empty for XFS
if [ "$FSTYP" = "xfs" ]; then
- xfs_io -x -c "resblks 4" $SCRATCH_MNT >> $seq.full 2>&1
+ xfs_io -x -c "resblks 4" $SCRATCH_MNT >> $seqres.full 2>&1
fi
FILES=1000
diff --git a/tests/generic/225 b/tests/generic/225
index c09bd2a..ea44f2e 100755
--- a/tests/generic/225
+++ b/tests/generic/225
@@ -22,6 +22,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
@@ -48,7 +49,7 @@ _require_scratch
_scratch_mkfs > /dev/null 2>&1
_scratch_mount > /dev/null 2>&1
-rm -f $seq.full
+rm -f $seqres.full
fiemapfile=$SCRATCH_MNT/$seq.fiemap
fiemaplog=$SCRATCH_MNT/$seq.log
diff --git a/tests/generic/226 b/tests/generic/226
index 2179f2a..da45c9e 100755
--- a/tests/generic/226
+++ b/tests/generic/226
@@ -23,6 +23,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
@@ -38,11 +39,11 @@ _supported_os Linux IRIX
_require_scratch
# real QA test starts here
-rm -f $seq.full
+rm -f $seqres.full
umount $SCRATCH_DEV 2>/dev/null
echo "--> mkfs 256m filesystem"
-_scratch_mkfs_sized `expr 256 \* 1024 \* 1024` >> $seq.full 2>&1
+_scratch_mkfs_sized `expr 256 \* 1024 \* 1024` >> $seqres.full 2>&1
_scratch_mount
loops=16
@@ -54,7 +55,7 @@ echo "--> $loops buffered 64m writes in a loop"
for I in `seq 1 $loops`; do
echo -n "$I "
xfs_io -F -f \
- -c "pwrite ${buffer} 0 64m" $SCRATCH_MNT/test >> $seq.full
+ -c "pwrite ${buffer} 0 64m" $SCRATCH_MNT/test >> $seqres.full
rm -f $SCRATCH_MNT/test
done
@@ -66,7 +67,7 @@ echo "--> $loops direct 64m writes in a loop"
for I in `seq 1 $loops`; do
echo -n "$I "
xfs_io -F -f -d \
- -c "pwrite ${buffer} 0 64m" $SCRATCH_MNT/test >> $seq.full
+ -c "pwrite ${buffer} 0 64m" $SCRATCH_MNT/test >> $seqres.full
rm -f $SCRATCH_MNT/test
done
diff --git a/tests/generic/228 b/tests/generic/228
index 2704934..c8af133 100755
--- a/tests/generic/228
+++ b/tests/generic/228
@@ -23,6 +23,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
_cleanup()
@@ -49,7 +50,7 @@ _supported_os Linux
[ -n "$XFS_IO_PROG" ] || _notrun "xfs_io executable not found"
-rm -f $seq.full
+rm -f $seqres.full
# Sanity check to see if fallocate works
_require_xfs_io_falloc
diff --git a/tests/generic/230 b/tests/generic/230
index a442857..c3db20b 100755
--- a/tests/generic/230
+++ b/tests/generic/230
@@ -26,6 +26,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
@@ -58,49 +59,49 @@ test_files()
test_enforcement()
{
echo "### some buffered IO (type=$type)"
- echo "--- initiating IO..." >>$seq.full
+ echo "--- initiating IO..." >>$seqres.full
# Firstly fit below block soft limit
echo "Write 900k..."
su $qa_user -c "$XFS_IO_PROG -F -c 'pwrite 0 900k' -c fsync \
- $SCRATCH_MNT/file1" 2>&1 >>$seq.full | tee -a $seq.full
- repquota -$type $SCRATCH_MNT | grep -v "^root" >>$seq.full 2>&1
+ $SCRATCH_MNT/file1" 2>&1 >>$seqres.full | tee -a $seqres.full
+ repquota -$type $SCRATCH_MNT | grep -v "^root" >>$seqres.full 2>&1
# Secondly overcome block soft limit
echo "Rewrite 1001k..."
su $qa_user -c "$XFS_IO_PROG -F -c 'pwrite 0 1001k' -c fsync \
- $SCRATCH_MNT/file1" 2>&1 >>$seq.full | tee -a $seq.full
- repquota -$type $SCRATCH_MNT | grep -v "^root" >>$seq.full 2>&1
+ $SCRATCH_MNT/file1" 2>&1 >>$seqres.full | tee -a $seqres.full
+ repquota -$type $SCRATCH_MNT | grep -v "^root" >>$seqres.full 2>&1
# Now try to overcome block hardlimit
echo "Write 1000k..."
su $qa_user -c "$XFS_IO_PROG -F -c 'pwrite 0 1000k' -c fsync \
- $SCRATCH_MNT/file2" 2>&1 >>$seq.full | tee -a $seq.full
- repquota -$type $SCRATCH_MNT | grep -v "^root" >>$seq.full 2>&1
+ $SCRATCH_MNT/file2" 2>&1 >>$seqres.full | tee -a $seqres.full
+ repquota -$type $SCRATCH_MNT | grep -v "^root" >>$seqres.full 2>&1
# Now sleep for grace time and check that softlimit got enforced
sleep $((grace+1))
echo "Write 4096..."
su $qa_user -c "$XFS_IO_PROG -F -c 'truncate 0' -c 'pwrite 0 4096' \
- $SCRATCH_MNT/file2" 2>&1 >>$seq.full | tee -a $seq.full
- repquota -$type $SCRATCH_MNT | grep -v "^root" >>$seq.full 2>&1
+ $SCRATCH_MNT/file2" 2>&1 >>$seqres.full | tee -a $seqres.full
+ repquota -$type $SCRATCH_MNT | grep -v "^root" >>$seqres.full 2>&1
# And now the softlimit test for inodes
# First reset space limits so that we don't have problems with
# space reservations on XFS
setquota -$type $qa_user 0 0 3 5 $SCRATCH_MNT
echo "Touch 3+4"
su $qa_user -c "touch $SCRATCH_MNT/file3 $SCRATCH_MNT/file4" \
- 2>&1 >>$seq.full | _filter_scratch | tee -a $seq.full
- repquota -$type $SCRATCH_MNT | grep -v "^root" >>$seq.full 2>&1
+ 2>&1 >>$seqres.full | _filter_scratch | tee -a $seqres.full
+ repquota -$type $SCRATCH_MNT | grep -v "^root" >>$seqres.full 2>&1
# Try to exceed inode hardlimit
echo "Touch 5+6"
su $qa_user -c "touch $SCRATCH_MNT/file5 $SCRATCH_MNT/file6" \
- 2>&1 >>$seq.full | _filter_scratch | tee -a $seq.full
- repquota -$type $SCRATCH_MNT | grep -v "^root" >>$seq.full 2>&1
+ 2>&1 >>$seqres.full | _filter_scratch | tee -a $seqres.full
+ repquota -$type $SCRATCH_MNT | grep -v "^root" >>$seqres.full 2>&1
# Wait and check grace time enforcement
- rm -f $SCRATCH_MNT/file5 >>$seq.full 2>&1
+ rm -f $SCRATCH_MNT/file5 >>$seqres.full 2>&1
sleep $((grace+1))
echo "Touch 5"
- su $qa_user -c "touch $SCRATCH_MNT/file5" 2>&1 >>$seq.full |
- _filter_scratch | tee -a $seq.full
- repquota -$type $SCRATCH_MNT | grep -v "^root" >>$seq.full 2>&1
- echo "--- completed IO ($type)" >>$seq.full
+ su $qa_user -c "touch $SCRATCH_MNT/file5" 2>&1 >>$seqres.full |
+ _filter_scratch | tee -a $seqres.full
+ repquota -$type $SCRATCH_MNT | grep -v "^root" >>$seqres.full 2>&1
+ echo "--- completed IO ($type)" >>$seqres.full
}
cleanup_files()
@@ -109,11 +110,11 @@ cleanup_files()
}
# real QA test starts here
-rm -f $seq.full
+rm -f $seqres.full
grace=2
-_scratch_mkfs >> $seq.full 2>&1
+_scratch_mkfs >> $seqres.full 2>&1
_scratch_mount "-o usrquota,grpquota"
quotacheck -u -g $SCRATCH_MNT 2>/dev/null
quotaon $SCRATCH_MNT 2>/dev/null
diff --git a/tests/generic/231 b/tests/generic/231
index 6d8bda7..1a434d4 100755
--- a/tests/generic/231
+++ b/tests/generic/231
@@ -24,6 +24,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
@@ -45,19 +46,19 @@ _fsx()
echo "=== FSX Standard Mode, Memory Mapping, $tasks Tasks ==="
for (( i = 1; i <= $tasks; i++ )); do
SEED=$RANDOM
- echo "ltp/fsx $FSX_ARGS -S $SEED $SCRATCH_MNT/fsx_file$i" >>$seq.full
+ echo "ltp/fsx $FSX_ARGS -S $SEED $SCRATCH_MNT/fsx_file$i" >>$seqres.full
su $qa_user -c "ltp/fsx $FSX_ARGS -S $SEED \
$SCRATCH_MNT/fsx_file$i" >$tmp.output$i 2>&1 &
done
for (( i = 1; i <= $tasks; i++ )); do
if ! wait %$i; then
- cat $tmp.output$i | tee -a $seq.full
+ cat $tmp.output$i | tee -a $seqres.full
wait
return 1
fi
$XFS_IO_PROG -F -c 'fsync' $SCRATCH_MNT/fsx_file$i
- cat $tmp.output$i | tee -a $seq.full
+ cat $tmp.output$i | tee -a $seqres.full
done
return 0
}
@@ -70,7 +71,7 @@ _require_quota
_require_user
_need_to_be_root
-_scratch_mkfs >> $seq.full 2>&1
+_scratch_mkfs >> $seqres.full 2>&1
_scratch_mount "-o usrquota,grpquota"
chmod 777 $SCRATCH_MNT
quotacheck -u -g $SCRATCH_MNT 2>/dev/null
diff --git a/tests/generic/232 b/tests/generic/232
index f7a1eb7..0f72733 100755
--- a/tests/generic/232
+++ b/tests/generic/232
@@ -24,6 +24,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
@@ -38,7 +39,7 @@ trap "rm -f $tmp.*; exit \$status" 0 1 2 3 15
_filter_num()
{
- tee -a $here/$seq.full |\
+ tee -a $here/$seqres.full |\
sed -e 's/[0-9][0-9]* inodes/I inodes/g' \
-e 's/[0-9][0-9]* paths/P paths/g' \
-e 's/seed = [0-9][0-9]*/seed = S/'
@@ -54,11 +55,11 @@ _fsstress()
count=2000
args=`_scale_fsstress_args -d $out -n $count -p 7`
- echo "fsstress $args" >> tee -a $here/$seq.full
- if ! $FSSTRESS_PROG $args | tee -a $here/$seq.full | _filter_num
+ echo "fsstress $args" >> tee -a $here/$seqres.full
+ if ! $FSSTRESS_PROG $args | tee -a $here/$seqres.full | _filter_num
then
echo " fsstress $args returned $?"
- cat $tmp.out | tee -a $here/$seq.full
+ cat $tmp.out | tee -a $here/$seqres.full
status=1
fi
}
@@ -70,7 +71,7 @@ _require_scratch
_require_quota
_need_to_be_root
-_scratch_mkfs >> $seq.full 2>&1
+_scratch_mkfs >> $seqres.full 2>&1
_scratch_mount "-o usrquota,grpquota"
chmod 777 $SCRATCH_MNT
quotacheck -u -g $SCRATCH_MNT 2>/dev/null
diff --git a/tests/generic/233 b/tests/generic/233
index 330041c..20ba711 100755
--- a/tests/generic/233
+++ b/tests/generic/233
@@ -25,6 +25,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
@@ -42,7 +43,7 @@ FSX_ARGS="-q -l $FSX_FILE_SIZE -o 65536 -S 191110531 -N 100000"
_filter_num()
{
- tee -a $here/$seq.full |\
+ tee -a $here/$seqres.full |\
sed -e 's/[0-9][0-9]* inodes/I inodes/g' \
-e 's/[0-9][0-9]* paths/P paths/g' \
-e 's/seed = [0-9][0-9]*/seed = S/'
@@ -61,11 +62,11 @@ _fsstress()
-f rename=10 -f fsync=2 -f write=15 -f dwrite=15 \
-n $count -d $out -p 7`
- echo "fsstress $args" >> tee -a $here/$seq.full
- if ! su $qa_user -c "$FSSTRESS_PROG $args" | tee -a $here/$seq.full | _filter_num
+ echo "fsstress $args" >> tee -a $here/$seqres.full
+ if ! su $qa_user -c "$FSSTRESS_PROG $args" | tee -a $here/$seqres.full | _filter_num
then
echo " fsstress $args returned $?"
- cat $tmp.out | tee -a $here/$seq.full
+ cat $tmp.out | tee -a $here/$seqres.full
status=1
fi
}
@@ -78,7 +79,7 @@ _require_quota
_require_user
_need_to_be_root
-_scratch_mkfs >> $seq.full 2>&1
+_scratch_mkfs >> $seqres.full 2>&1
_scratch_mount "-o usrquota,grpquota"
chmod 777 $SCRATCH_MNT
quotacheck -u -g $SCRATCH_MNT 2>/dev/null
diff --git a/tests/generic/234 b/tests/generic/234
index dbb13f6..e5c94e9 100755
--- a/tests/generic/234
+++ b/tests/generic/234
@@ -26,6 +26,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
@@ -46,7 +47,7 @@ test_setting()
idmod=200000
seed=$RANDOM
RANDOM=$seed
- echo "Starting test with procs=$procs, idmod=$idmod, and seed=$seed" >>$seq.full
+ echo "Starting test with procs=$procs, idmod=$idmod, and seed=$seed" >>$seqres.full
for (( i = 0; i < $procs; i++ )); do
( SETUCOUNT=1; SETGCOUNT=1; SETUIDS[0]=0; SETGIDS[0]=0
@@ -93,9 +94,9 @@ _require_quota
_need_to_be_root
# real QA test starts here
-rm -f $seq.full
+rm -f $seqres.full
-_scratch_mkfs >> $seq.full 2>&1
+_scratch_mkfs >> $seqres.full 2>&1
_scratch_mount "-o usrquota,grpquota"
quotacheck -u -g $SCRATCH_MNT 2>/dev/null
quotaon -u -g $SCRATCH_MNT 2>/dev/null
diff --git a/tests/generic/235 b/tests/generic/235
index f4a1fce..85ed782 100755
--- a/tests/generic/235
+++ b/tests/generic/235
@@ -26,6 +26,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
@@ -47,9 +48,9 @@ _require_user
_need_to_be_root
# real QA test starts here
-rm -f $seq.full
+rm -f $seqres.full
-_scratch_mkfs >> $seq.full 2>&1
+_scratch_mkfs >> $seqres.full 2>&1
_scratch_mount "-o usrquota,grpquota"
quotacheck -u -g $SCRATCH_MNT 2>/dev/null
quotaon $SCRATCH_MNT 2>/dev/null
@@ -64,12 +65,12 @@ repquota -u -g $SCRATCH_MNT | grep -v "^root" | _filter_scratch
#
# We work around it by editing the context out of mtab. Sigh.
sed -i "s#^$SCRATCH_DEV\(.*\),context=\"system_u:object_r:nfs_t:s0\"#$SCRATCH_DEV\1#" /etc/mtab
-mount -o remount,ro $SCRATCH_DEV 2>&1 | tee -a $seq.full | _filter_scratch
-touch $SCRATCH_MNT/failed 2>&1 | tee -a $seq.full | _filter_scratch
-mount -o remount,rw $SCRATCH_DEV 2>&1 | tee -a $seq.full | _filter_scratch
+mount -o remount,ro $SCRATCH_DEV 2>&1 | tee -a $seqres.full | _filter_scratch
+touch $SCRATCH_MNT/failed 2>&1 | tee -a $seqres.full | _filter_scratch
+mount -o remount,rw $SCRATCH_DEV 2>&1 | tee -a $seqres.full | _filter_scratch
$XFS_IO_PROG -F -c 'pwrite 0 8k' -c 'fsync' \
- $SCRATCH_MNT/testfile >>$seq.full 2>&1
+ $SCRATCH_MNT/testfile >>$seqres.full 2>&1
repquota -u -g $SCRATCH_MNT | grep -v "^root" | _filter_scratch
umount $SCRATCH_DEV 2>/dev/null
diff --git a/tests/generic/236 b/tests/generic/236
index ec70cdb..016afae 100755
--- a/tests/generic/236
+++ b/tests/generic/236
@@ -24,6 +24,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
_cleanup()
diff --git a/tests/generic/237 b/tests/generic/237
index 7ebb88e..7e54aed 100755
--- a/tests/generic/237
+++ b/tests/generic/237
@@ -24,6 +24,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
@@ -52,7 +53,7 @@ _supported_os Linux
[ -x $runas ] || _notrun "$runas executable not found"
-rm -f $seq.full
+rm -f $seqres.full
_setup_testdir
diff --git a/tests/generic/239 b/tests/generic/239
index 8aa4ed0..e25a6a0 100755
--- a/tests/generic/239
+++ b/tests/generic/239
@@ -23,6 +23,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
diff --git a/tests/generic/240 b/tests/generic/240
index d5f8940..77fffe8 100755
--- a/tests/generic/240
+++ b/tests/generic/240
@@ -29,6 +29,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
@@ -55,7 +56,7 @@ _require_aiodio aiodio_sparse2
echo "Silence is golden."
# real QA test starts here
-rm -f $seq.full
+rm -f $seqres.full
rm -f $TEST_DIR/aiodio_sparse
diff --git a/tests/generic/241 b/tests/generic/241
index ee572a7..b55344b 100755
--- a/tests/generic/241
+++ b/tests/generic/241
@@ -22,6 +22,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
@@ -47,12 +48,12 @@ _supported_os Linux
echo "Silence is golden."
# real QA test starts here
-rm -f $seq.full
+rm -f $seqres.full
rm -rf $TEST_DIR/dbench
mkdir $TEST_DIR/dbench
-dbench -t 60 -D $TEST_DIR/dbench 4 >> $seq.full
+dbench -t 60 -D $TEST_DIR/dbench 4 >> $seqres.full
status=$?
exit
diff --git a/tests/generic/245 b/tests/generic/245
index fb81d39..9832e92 100755
--- a/tests/generic/245
+++ b/tests/generic/245
@@ -25,6 +25,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
diff --git a/tests/generic/246 b/tests/generic/246
index d82e27d..872e513 100755
--- a/tests/generic/246
+++ b/tests/generic/246
@@ -26,6 +26,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
diff --git a/tests/generic/247 b/tests/generic/247
index 3a2f735..8a7e2c6 100755
--- a/tests/generic/247
+++ b/tests/generic/247
@@ -22,6 +22,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
diff --git a/tests/generic/248 b/tests/generic/248
index f245c1c..7bb42a1 100755
--- a/tests/generic/248
+++ b/tests/generic/248
@@ -23,6 +23,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
diff --git a/tests/generic/249 b/tests/generic/249
index e72092d..288328c 100755
--- a/tests/generic/249
+++ b/tests/generic/249
@@ -22,6 +22,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
@@ -50,11 +51,11 @@ echo "Feel the serenity."
SRC=$TEST_DIR/$seq.src
DST=$TEST_DIR/$seq.dst
-rm -f $seq.full
+rm -f $seqres.full
-$XFS_IO_PROG -F -f -c "pwrite -S 0xa5a55a5a 0 32768k" -c fsync $SRC >> $seq.full 2>&1
+$XFS_IO_PROG -F -f -c "pwrite -S 0xa5a55a5a 0 32768k" -c fsync $SRC >> $seqres.full 2>&1
[ $? -ne 0 ] && _fail "xfs_io pwrite failed"
-$XFS_IO_PROG -F -f -c "sendfile -i $SRC 0 32768k" -c fsync $DST >> $seq.full 2>&1
+$XFS_IO_PROG -F -f -c "sendfile -i $SRC 0 32768k" -c fsync $DST >> $seqres.full 2>&1
[ $? -ne 0 ] && _fail "xfs_io sendfile failed"
diff -q $SRC $DST
diff --git a/tests/generic/251 b/tests/generic/251
index 25f14bd..95633e1 100755
--- a/tests/generic/251
+++ b/tests/generic/251
@@ -25,6 +25,7 @@
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
diff --git a/tests/generic/255 b/tests/generic/255
index d2973a8..3ef2449 100755
--- a/tests/generic/255
+++ b/tests/generic/255
@@ -23,6 +23,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
diff --git a/tests/generic/256 b/tests/generic/256
index 0d72795..d60584b 100755
--- a/tests/generic/256
+++ b/tests/generic/256
@@ -23,6 +23,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
diff --git a/tests/generic/257 b/tests/generic/257
index b58bd56..09a8fd8 100755
--- a/tests/generic/257
+++ b/tests/generic/257
@@ -22,6 +22,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
@@ -50,5 +51,5 @@ src/t_dir_offset2 $TEST_DIR/ttt
# success, all done
echo "*** done"
-rm -f $seq.full
+rm -f $seqres.full
status=0
diff --git a/tests/generic/258 b/tests/generic/258
index 87817bc..ac03bb5 100755
--- a/tests/generic/258
+++ b/tests/generic/258
@@ -25,6 +25,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
diff --git a/tests/generic/260 b/tests/generic/260
index 65a01c3..d69e176 100755
--- a/tests/generic/260
+++ b/tests/generic/260
@@ -23,6 +23,7 @@
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
diff --git a/tests/generic/263 b/tests/generic/263
index 18cd5de..3e86efc 100755
--- a/tests/generic/263
+++ b/tests/generic/263
@@ -23,6 +23,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
@@ -38,16 +39,16 @@ trap "rm -f $tmp.*; exit \$status" 0 1 2 3 15
_supported_fs generic
_supported_os Linux
-rm -f $seq.full
+rm -f $seqres.full
run_fsx()
{
- echo fsx $@ | tee -a $seq.full
+ echo fsx $@ | tee -a $seqres.full
args=`echo $@ | sed -e "s/ BSIZE / $bsize /g" -e "s/ PSIZE / $psize /g"`
rm -f $TEST_DIR/junk
- $here/ltp/fsx $args $TEST_DIR/junk >>$seq.full 2>&1
+ $here/ltp/fsx $args $TEST_DIR/junk >>$seqres.full 2>&1
if [ $? -ne 0 ]; then
- cat $seq.full
+ cat $seqres.full
exit 1
fi
}
diff --git a/tests/generic/269 b/tests/generic/269
index ed27fb4..785d4de 100755
--- a/tests/generic/269
+++ b/tests/generic/269
@@ -23,6 +23,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
@@ -44,7 +45,7 @@ _workout()
enospc_time=2
out=$SCRATCH_MNT/fsstress.$$
args=`_scale_fsstress_args -p128 -n999999999 -f setattr=1 $FSSTRESS_AVOID -d $out`
- echo "fsstress $args" >> $here/$seq.full
+ echo "fsstress $args" >> $here/$seqres.full
$FSSTRESS_PROG $args > /dev/null 2>&1 &
pid=$!
echo "Run dd writers in parallel"
@@ -52,7 +53,7 @@ _workout()
do
# File will be opened with O_TRUNC each time
dd if=/dev/zero of=$SCRATCH_MNT/SPACE_CONSUMER bs=1M \
- >> $here/$seq.full 2>&1
+ >> $here/$seqres.full 2>&1
sleep $enospc_time
done
kill $pid
@@ -65,7 +66,7 @@ _supported_os Linux
_need_to_be_root
_require_scratch
-_scratch_mkfs_sized $((512 * 1024 * 1024)) >> $seq.full 2>&1
+_scratch_mkfs_sized $((512 * 1024 * 1024)) >> $seqres.full 2>&1
_scratch_mount
if ! _workout; then
diff --git a/tests/generic/270 b/tests/generic/270
index 7841cd1..e6dbd8e 100755
--- a/tests/generic/270
+++ b/tests/generic/270
@@ -24,6 +24,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
@@ -47,7 +48,7 @@ _workout()
enospc_time=2
out=$SCRATCH_MNT/fsstress.$$
args=`_scale_fsstress_args -p128 -n999999999 -f setattr=1 $FSSTRESS_AVOID -d $out`
- echo "fsstress $args" >> $here/$seq.full
+ echo "fsstress $args" >> $here/$seqres.full
# Grant chown capability
cp $FSSTRESS_PROG $tmp.fsstress.bin
if [ "`whereis setcap`" == "setcap:" ]; then
@@ -64,7 +65,7 @@ _workout()
# File will be opened with O_TRUNC each time
su $qa_user -c "dd if=/dev/zero \
of=$SCRATCH_MNT/SPACE_CONSUMER bs=1M " \
- >> $here/$seq.full 2>&1
+ >> $here/$seqres.full 2>&1
sleep $enospc_time
done
@@ -80,7 +81,7 @@ _require_user
_need_to_be_root
_require_scratch
-_scratch_mkfs_sized $((512 * 1024 * 1024)) >> $seq.full 2>&1
+_scratch_mkfs_sized $((512 * 1024 * 1024)) >> $seqres.full 2>&1
_scratch_mount "-o usrquota,grpquota"
chmod 777 $SCRATCH_MNT
quotacheck -u -g $SCRATCH_MNT 2>/dev/null
diff --git a/tests/generic/273 b/tests/generic/273
index 4473fd4..3cfd3b0 100755
--- a/tests/generic/273
+++ b/tests/generic/273
@@ -24,6 +24,7 @@
#creator
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
@@ -91,7 +92,7 @@ _porter()
exit
fi
- cp -r $SCRATCH_MNT/origin $SCRATCH_MNT/sub_$_suffix >>$seq.full 2>&1
+ cp -r $SCRATCH_MNT/origin $SCRATCH_MNT/sub_$_suffix >>$seqres.full 2>&1
if [ $? -ne 0 ]
then
echo "_porter $_suffix not complete"
@@ -129,10 +130,10 @@ echo "------------------------------"
echo "start the workload"
echo "------------------------------"
-rm -f $seq.full
+rm -f $seqres.full
_scratch_unmount 2>/dev/null
-_scratch_mkfs_sized $((2 * 1024 * 1024 * 1024)) >>$seq.full 2>&1
+_scratch_mkfs_sized $((2 * 1024 * 1024 * 1024)) >>$seqres.full 2>&1
_scratch_mount
_do_workload
diff --git a/tests/generic/274 b/tests/generic/274
index 9b0fb71..d5f09a4 100755
--- a/tests/generic/274
+++ b/tests/generic/274
@@ -26,6 +26,7 @@
#creator
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
@@ -53,48 +54,48 @@ echo "------------------------------"
echo "preallocation test"
echo "------------------------------"
-rm -f $seq.full
+rm -f $seqres.full
umount $SCRATCH_DEV 2>/dev/null
-_scratch_mkfs_sized $((1 * 1024 * 1024 * 1024)) >>$seq.full 2>&1
+_scratch_mkfs_sized $((1 * 1024 * 1024 * 1024)) >>$seqres.full 2>&1
_scratch_mount
# Create a 4k file and Allocate 4M past EOF on that file
xfs_io -F -f -c "pwrite 0 4k" -c "falloc -k 4k 4m" $SCRATCH_MNT/test \
- >>$seq.full 2>&1 || _fail "failed to create test file"
+ >>$seqres.full 2>&1 || _fail "failed to create test file"
# Fill the rest of the fs completely
-# Note, this will show ENOSPC errors in $seq.full, that's ok.
-echo "Fill fs with 1M IOs; ENOSPC expected" >> $seq.full
-dd if=/dev/zero of=$SCRATCH_MNT/tmp1 bs=1M >>$seq.full 2>&1
-echo "Fill fs with 4K IOs; ENOSPC expected" >> $seq.full
-dd if=/dev/zero of=$SCRATCH_MNT/tmp2 bs=4K >>$seq.full 2>&1
+# Note, this will show ENOSPC errors in $seqres.full, that's ok.
+echo "Fill fs with 1M IOs; ENOSPC expected" >> $seqres.full
+dd if=/dev/zero of=$SCRATCH_MNT/tmp1 bs=1M >>$seqres.full 2>&1
+echo "Fill fs with 4K IOs; ENOSPC expected" >> $seqres.full
+dd if=/dev/zero of=$SCRATCH_MNT/tmp2 bs=4K >>$seqres.full 2>&1
sync
# Last effort, use O_SYNC
-echo "Fill fs with 4K DIOs; ENOSPC expected" >> $seq.full
-dd if=/dev/zero of=$SCRATCH_MNT/tmp3 bs=4K oflag=sync >>$seq.full 2>&1
+echo "Fill fs with 4K DIOs; ENOSPC expected" >> $seqres.full
+dd if=/dev/zero of=$SCRATCH_MNT/tmp3 bs=4K oflag=sync >>$seqres.full 2>&1
# Save space usage info
-echo "Post-fill space:" >> $seq.full
-df $SCRATCH_MNT >>$seq.full 2>&1
+echo "Post-fill space:" >> $seqres.full
+df $SCRATCH_MNT >>$seqres.full 2>&1
# Now attempt a write into all of the preallocated space -
# in a very nasty way, badly fragmenting it and then filling it in.
-echo "Fill in prealloc space; fragment at offsets:" >> $seq.full
+echo "Fill in prealloc space; fragment at offsets:" >> $seqres.full
for i in `seq 1 2 1023`; do
- echo -n "$i " >> $seq.full
+ echo -n "$i " >> $seqres.full
dd if=/dev/zero of=$SCRATCH_MNT/test seek=$i bs=4K count=1 conv=notrunc \
- >>$seq.full 2>/dev/null || _fail "failed to write to test file"
+ >>$seqres.full 2>/dev/null || _fail "failed to write to test file"
done
sync
-echo >> $seq.full
-echo "Fill in prealloc space; fill holes at offsets:" >> $seq.full
+echo >> $seqres.full
+echo "Fill in prealloc space; fill holes at offsets:" >> $seqres.full
for i in `seq 2 2 1023`; do
- echo -n "$i " >> $seq.full
+ echo -n "$i " >> $seqres.full
dd if=/dev/zero of=$SCRATCH_MNT/test seek=$i bs=4K count=1 conv=notrunc \
- >>$seq.full 2>/dev/null || _fail "failed to fill test file"
+ >>$seqres.full 2>/dev/null || _fail "failed to fill test file"
done
sync
-echo >> $seq.full
+echo >> $seqres.full
echo "done"
exit
diff --git a/tests/generic/275 b/tests/generic/275
index dc1eeeb..7782840 100755
--- a/tests/generic/275
+++ b/tests/generic/275
@@ -25,6 +25,7 @@
#creator
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
@@ -50,38 +51,38 @@ echo "------------------------------"
echo "write until ENOSPC test"
echo "------------------------------"
-rm -f $seq.full
+rm -f $seqres.full
umount $SCRATCH_DEV 2>/dev/null
-_scratch_mkfs_sized $((2 * 1024 * 1024 * 1024)) >>$seq.full 2>&1
+_scratch_mkfs_sized $((2 * 1024 * 1024 * 1024)) >>$seqres.full 2>&1
_scratch_mount
-dd if=/dev/zero of=$SCRATCH_MNT/tmp1 bs=256K count=1 >>$seq.full 2>&1
+dd if=/dev/zero of=$SCRATCH_MNT/tmp1 bs=256K count=1 >>$seqres.full 2>&1
[ $? -ne 0 ] && _fail "Error creating file"
# Attempt to completely fill fs
-dd if=/dev/zero of=$SCRATCH_MNT/tmp2 bs=1M >>$seq.full 2>&1
+dd if=/dev/zero of=$SCRATCH_MNT/tmp2 bs=1M >>$seqres.full 2>&1
sync
-dd if=/dev/zero of=$SCRATCH_MNT/tmp3 bs=4K >>$seq.full 2>&1
+dd if=/dev/zero of=$SCRATCH_MNT/tmp3 bs=4K >>$seqres.full 2>&1
sync
# Last effort, use O_SYNC
-dd if=/dev/zero of=$SCRATCH_MNT/tmp4 bs=4K oflag=sync >>$seq.full 2>&1
+dd if=/dev/zero of=$SCRATCH_MNT/tmp4 bs=4K oflag=sync >>$seqres.full 2>&1
# Save space usage info to the full file
-echo "Pre rm space:" >> $seq.full
-df $SCRATCH_MNT >>$seq.full 2>&1
+echo "Pre rm space:" >> $seqres.full
+df $SCRATCH_MNT >>$seqres.full 2>&1
# Should leave approx 256k free
rm -f $SCRATCH_MNT/tmp1
sync
-echo "Post rm space:" >> $seq.full
-df $SCRATCH_MNT >>$seq.full 2>&1
+echo "Post rm space:" >> $seqres.full
+df $SCRATCH_MNT >>$seqres.full 2>&1
_freespace=`df -k $SCRATCH_MNT | tail -n 1 | awk '{print $4}'`
[ $_freespace -gt 1024 ] && _fail "could not sufficiently fill filesystem"
# Try a write larger than available space
-dd if=/dev/zero of=$SCRATCH_MNT/tmp1 bs=1M count=1 >>$seq.full 2>&1
-echo "Bytes written until ENOSPC:" >>$seq.full
-du $SCRATCH_MNT/tmp1 >>$seq.full
+dd if=/dev/zero of=$SCRATCH_MNT/tmp1 bs=1M count=1 >>$seqres.full 2>&1
+echo "Bytes written until ENOSPC:" >>$seqres.full
+du $SCRATCH_MNT/tmp1 >>$seqres.full
# And at least some of it should succeed.
_filesize=`ls -l $SCRATCH_MNT/tmp1 | awk '{print $5}'`
diff --git a/tests/generic/277 b/tests/generic/277
index 8ef809c..b85e429 100755
--- a/tests/generic/277
+++ b/tests/generic/277
@@ -23,6 +23,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
status=1 # failure is the default!
diff --git a/tests/generic/280 b/tests/generic/280
index 336bea6..4b1e9b1 100755
--- a/tests/generic/280
+++ b/tests/generic/280
@@ -23,6 +23,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
@@ -51,10 +52,10 @@ _require_freeze
_supported_os Linux
_supported_fs generic
-rm -f $seq.full
+rm -f $seqres.full
umount $SCRATCH_DEV 2>/dev/null
-_scratch_mkfs >> $seq.full 2>&1
+_scratch_mkfs >> $seqres.full 2>&1
_scratch_mount "-o usrquota,grpquota"
quotacheck -u -g $SCRATCH_MNT 2>/dev/null
quotaon $SCRATCH_MNT 2>/dev/null
diff --git a/tests/generic/285 b/tests/generic/285
index a18fc71..ffa0b08 100644
--- a/tests/generic/285
+++ b/tests/generic/285
@@ -28,6 +28,7 @@
owner=jeff.liu@xxxxxxxxxx
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
@@ -50,7 +51,7 @@ _cleanup()
eval "rm -f $BASE_TEST_FILE.*"
}
-$here/src/seek_sanity_test $BASE_TEST_FILE > $seq.full 2>&1 ||
+$here/src/seek_sanity_test $BASE_TEST_FILE > $seqres.full 2>&1 ||
_fail "seek sanity check failed!"
# success, all done
diff --git a/tests/generic/286 b/tests/generic/286
index 9567244..6fd50c5 100644
--- a/tests/generic/286
+++ b/tests/generic/286
@@ -25,6 +25,7 @@
owner=jeff.liu@xxxxxxxxxx
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
@@ -63,11 +64,11 @@ test01()
write_cmd="$write_cmd -c \"pwrite $offset 1m\""
done
- echo "*** test01() create sparse file ***" >>$seq.full
- eval ${XFS_IO_PROG} -F -f "${write_cmd}" $src >>$seq.full 2>&1 ||
+ echo "*** test01() create sparse file ***" >>$seqres.full
+ eval ${XFS_IO_PROG} -F -f "${write_cmd}" $src >>$seqres.full 2>&1 ||
_fail "create sparse file failed!"
- echo "*** test01() create sparse file done ***" >>$seq.full
- echo >>$seq.full
+ echo "*** test01() create sparse file done ***" >>$seqres.full
+ echo >>$seqres.full
$here/src/seek_copy_test $src $dest
@@ -91,11 +92,11 @@ test02()
write_cmd="$write_cmd -c \"falloc $offset 3m\" -c \"pwrite $offset 1m\""
done
- echo "*** test02() create sparse file ***" >>$seq.full
- eval ${XFS_IO_PROG} -F -f "${write_cmd}" $src >>$seq.full 2>&1 ||
+ echo "*** test02() create sparse file ***" >>$seqres.full
+ eval ${XFS_IO_PROG} -F -f "${write_cmd}" $src >>$seqres.full 2>&1 ||
_fail "create sparse file failed!"
- echo "*** test02() create sparse file done ***" >>$seq.full
- echo >>$seq.full
+ echo "*** test02() create sparse file done ***" >>$seqres.full
+ echo >>$seqres.full
$here/src/seek_copy_test $src $dest
@@ -134,11 +135,11 @@ test03()
write_cmd="$write_cmd -c \"pwrite $offset 10m\""
done
- echo "*** test03() create sparse file ***" >>$seq.full
- eval ${XFS_IO_PROG} -F -f "${write_cmd}" $src >>$seq.full 2>&1 ||
+ echo "*** test03() create sparse file ***" >>$seqres.full
+ eval ${XFS_IO_PROG} -F -f "${write_cmd}" $src >>$seqres.full 2>&1 ||
_fail "create sparse file failed!"
- echo "*** test03() create sparse file done ***" >>$seq.full
- echo >>$seq.full
+ echo "*** test03() create sparse file done ***" >>$seqres.full
+ echo >>$seqres.full
$here/src/seek_copy_test $src $dest
test $(stat --printf "%s" $src) = $(stat --printf "%s" $dest) ||
@@ -176,11 +177,11 @@ test04()
write_cmd="$write_cmd -c \"pwrite $offset 2m\""
done
- echo "*** test04() create sparse file ***" >>$seq.full
- eval ${XFS_IO_PROG} -F -f "${write_cmd}" $src >>$seq.full 2>&1 ||
+ echo "*** test04() create sparse file ***" >>$seqres.full
+ eval ${XFS_IO_PROG} -F -f "${write_cmd}" $src >>$seqres.full 2>&1 ||
_fail "create sparse file failed!"
- echo "*** test04() create sparse file done ***" >>$seq.full
- echo >>$seq.full
+ echo "*** test04() create sparse file done ***" >>$seqres.full
+ echo >>$seqres.full
$here/src/seek_copy_test $src $dest
test $(stat --printf "%s" $src) = $(stat --printf "%s" $dest) ||
@@ -189,7 +190,7 @@ test04()
cmp $src $dest || _fail "TEST04: file bytes check failed"
}
-rm -f $seq.full
+rm -f $seqres.full
test01
test02
test03
diff --git a/tests/generic/288 b/tests/generic/288
index 944ca50..996b0bd 100644
--- a/tests/generic/288
+++ b/tests/generic/288
@@ -24,6 +24,7 @@
owner=lczerner@xxxxxxxxxx
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
status=0
diff --git a/tests/generic/294 b/tests/generic/294
index 192809c..1377573 100644
--- a/tests/generic/294
+++ b/tests/generic/294
@@ -25,6 +25,7 @@
owner=sandeen@xxxxxxxxxx
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
diff --git a/tests/generic/299 b/tests/generic/299
index 4305ead..be61c20 100644
--- a/tests/generic/299
+++ b/tests/generic/299
@@ -27,6 +27,7 @@
owner=dmonakhov@xxxxxxxxxx
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
@@ -116,7 +117,7 @@ _workout()
echo ""
echo "Run fio with random aio-dio pattern"
echo ""
- cat $tmp-$seq.fio >> $seq.full
+ cat $tmp-$seq.fio >> $seqres.full
run_check $FIO_PROG $tmp-$seq.fio &
pid=$!
echo "Start fallocate/truncate loop"
@@ -126,7 +127,7 @@ _workout()
for ((k=1; k <= NUM_JOBS; k++))
do
fallocate -l $FILE_SIZE $SCRATCH_MNT/direct_aio.$k.0 \
- >> $seq.full 2>&1
+ >> $seqres.full 2>&1
done
for ((k=1; k <= NUM_JOBS; k++))
do
@@ -139,7 +140,7 @@ _workout()
wait $pid
}
-_scratch_mkfs >> $seq.full 2>&1
+_scratch_mkfs >> $seqres.full 2>&1
_scratch_mount
if ! _workout; then
diff --git a/tests/generic/300 b/tests/generic/300
index 73c9ea7..499f414 100644
--- a/tests/generic/300
+++ b/tests/generic/300
@@ -27,6 +27,7 @@
owner=dmonakhov@xxxxxxxxxx
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
@@ -129,13 +130,13 @@ _workout()
echo ""
echo "Run fio with random aio-dio pattern"
echo ""
- cat $tmp-$seq.fio >> $seq.full
+ cat $tmp-$seq.fio >> $seqres.full
run_check $FIO_PROG $tmp-$seq.fio
}
_require_fio $tmp-$seq.fio
-_scratch_mkfs_sized $FS_SIZE >> $seq.full 2>&1
+_scratch_mkfs_sized $FS_SIZE >> $seqres.full 2>&1
_scratch_mount
if ! _workout; then
diff --git a/tests/shared/051 b/tests/shared/051
index 07d5a9b..0671f83 100755
--- a/tests/shared/051
+++ b/tests/shared/051
@@ -23,6 +23,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
here=`pwd`
tmp=/tmp/$$
@@ -73,7 +74,7 @@ _supported_os Linux
[ -x $runas ] || _notrun "$runas executable not found"
-rm -f $seq.full
+rm -f $seqres.full
_setup_testdir
diff --git a/tests/shared/068 b/tests/shared/068
index 4f10a54..fa71cfc 100755
--- a/tests/shared/068
+++ b/tests/shared/068
@@ -24,6 +24,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
@@ -57,13 +58,13 @@ _require_freeze
echo "*** init FS"
-rm -f $seq.full
+rm -f $seqres.full
umount $SCRATCH_DEV >/dev/null 2>&1
-echo "*** MKFS ***" >>$seq.full
-echo "" >>$seq.full
-_scratch_mkfs >>$seq.full 2>&1 \
+echo "*** MKFS ***" >>$seqres.full
+echo "" >>$seqres.full
+_scratch_mkfs >>$seqres.full 2>&1 \
|| _fail "mkfs failed"
-_scratch_mount >>$seq.full 2>&1 \
+_scratch_mount >>$seqres.full 2>&1 \
|| _fail "mount failed"
touch $tmp.running
@@ -106,23 +107,23 @@ touch $tmp.running
i=0
let ITERATIONS=$ITERATIONS-1
-echo | tee -a $seq.full
+echo | tee -a $seqres.full
while [ $i -le $ITERATIONS ]
do
- echo "*** iteration: $i" | tee -a $seq.full
- echo "*** freezing \$SCRATCH_MNT" | tee -a $seq.full
- xfs_freeze -f "$SCRATCH_MNT" | tee -a $seq.full
+ echo "*** iteration: $i" | tee -a $seqres.full
+ echo "*** freezing \$SCRATCH_MNT" | tee -a $seqres.full
+ xfs_freeze -f "$SCRATCH_MNT" | tee -a $seqres.full
[ $? != 0 ] && echo xfs_freeze -f "$SCRATCH_MNT" failed | \
- tee -a $seq.full
+ tee -a $seqres.full
sleep 2
- echo "*** thawing \$SCRATCH_MNT" | tee -a $seq.full
- xfs_freeze -u "$SCRATCH_MNT" | tee -a $seq.full
+ echo "*** thawing \$SCRATCH_MNT" | tee -a $seqres.full
+ xfs_freeze -u "$SCRATCH_MNT" | tee -a $seqres.full
[ $? != 0 ] && echo xfs_freeze -u "$SCRATCH_MNT" failed | \
- tee -a $seq.full
+ tee -a $seqres.full
sleep 2
- echo | tee -a $seq.full
+ echo | tee -a $seqres.full
let i=$i+1
done
diff --git a/tests/shared/218 b/tests/shared/218
index 4b46452..7c2bd53 100755
--- a/tests/shared/218
+++ b/tests/shared/218
@@ -22,6 +22,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
@@ -59,36 +60,36 @@ rm -f $fragfile
# Craft some fragmented files, defrag them, check the result.
-echo "zero-length file:" | tee -a $seq.full
+echo "zero-length file:" | tee -a $seqres.full
touch $fragfile
_defrag $fragfile
-echo "Sparse file (no blocks):" | tee -a $seq.full
+echo "Sparse file (no blocks):" | tee -a $seqres.full
xfs_io -F -f -c "truncate 1m" $fragfile
_defrag $fragfile
-echo "Contiguous file:" | tee -a $seq.full
+echo "Contiguous file:" | tee -a $seqres.full
dd if=/dev/zero of=$fragfile bs=4k count=4 &>/dev/null
_defrag $fragfile
-echo "Write backwards sync, but contiguous - should defrag to 1 extent" | tee -a $seq.full
+echo "Write backwards sync, but contiguous - should defrag to 1 extent" | tee -a $seqres.full
for I in `seq 9 -1 0`; do
dd if=/dev/zero of=$fragfile bs=4k count=1 conv=notrunc seek=$I oflag=sync &>/dev/null
done
_defrag $fragfile
-echo "Write backwards sync leaving holes - defrag should do nothing" | tee -a $seq.full
+echo "Write backwards sync leaving holes - defrag should do nothing" | tee -a $seqres.full
for I in `seq 31 -2 0`; do
dd if=/dev/zero of=$fragfile bs=4k count=1 conv=notrunc seek=$I oflag=sync &>/dev/null
done
_defrag $fragfile
-echo "Write forwards sync leaving holes - defrag should do nothing" | tee -a $seq.full
+echo "Write forwards sync leaving holes - defrag should do nothing" | tee -a $seqres.full
for I in `seq 0 2 31`; do
dd if=/dev/zero of=$fragfile bs=4k count=1 conv=notrunc seek=$I oflag=sync &>/dev/null
done
_defrag $fragfile
-rm -f $seq.full
+rm -f $seqres.full
status=0
exit
diff --git a/tests/shared/243 b/tests/shared/243
index 6a1b6d7..4884e29 100755
--- a/tests/shared/243
+++ b/tests/shared/243
@@ -42,6 +42,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
@@ -85,23 +86,23 @@ _check_ext4_eof_flag()
# Ensure that the iflags value was parsed correctly.
if [ -z ${iflags} ]; then
- echo "iFlags value was not parsed successfully." >> $seq.full
+ echo "iFlags value was not parsed successfully." >> $seqres.full
status=1
exit ${status}
fi
# Check if EOFBLOCKS_FL is set.
if ((${iflags} & 0x400000)); then
- echo "EOFBLOCK_FL bit is set." >> $seq.full
+ echo "EOFBLOCK_FL bit is set." >> $seqres.full
bit_set=1
else
- echo "EOFBLOCK_FL bit is not set." >> $seq.full
+ echo "EOFBLOCK_FL bit is not set." >> $seqres.full
bit_set=0
fi
# Check current bit state to expected value.
if [ ${bit_set} -ne ${2} ]; then
- echo "Error: Current bit state incorrect." >> $seq.full
+ echo "Error: Current bit state incorrect." >> $seqres.full
status=1
exit ${status}
fi
@@ -121,14 +122,14 @@ _supported_os Linux
_require_xfs_io_falloc
# Real QA test starts here.
-rm -f $seq.full
+rm -f $seqres.full
# Remove any leftover files from last run.
rm -f ${TEST_DIR}/test_?
# Begin test cases.
echo "Test 1: Fallocate 40960 bytes and write 4096 bytes (buffered io)." \
- >> $seq.full
+ >> $seqres.full
${XFS_IO_PROG} -F -f \
-c 'falloc -k 0 40960' \
-c 'pwrite 0 4096' \
@@ -136,7 +137,7 @@ ${XFS_IO_PROG} -F -f \
_check_ext4_eof_flag test_1 ${BIT_SET}
echo "Test 2: Fallocate 40960 bytes and write 4096 bytes (direct io)." \
- >> $seq.full
+ >> $seqres.full
${XFS_IO_PROG} -F -f -d \
-c 'falloc -k 0 40960' \
-c 'pwrite 0 4096' \
@@ -144,7 +145,7 @@ ${XFS_IO_PROG} -F -f -d \
_check_ext4_eof_flag test_2 ${BIT_SET}
echo "Test 3: Fallocate 40960 bytes and write 40960 bytes (buffered io)." \
- >> $seq.full
+ >> $seqres.full
${XFS_IO_PROG} -F -f \
-c 'falloc -k 0 40960' \
-c 'pwrite 0 40960' \
@@ -152,7 +153,7 @@ ${XFS_IO_PROG} -F -f \
_check_ext4_eof_flag test_3 ${BIT_NOT_SET}
echo "Test 4: Fallocate 40960 bytes and write 40960 bytes (direct io)." \
- >> $seq.full
+ >> $seqres.full
${XFS_IO_PROG} -F -f -d \
-c 'falloc -k 0 40960' \
-c 'pwrite 0 40960' \
@@ -160,7 +161,7 @@ ${XFS_IO_PROG} -F -f -d \
_check_ext4_eof_flag test_4 ${BIT_NOT_SET}
echo "Test 5: Fallocate 128k, seek 256k and write 4k block (buffered io)." \
- >> $seq.full
+ >> $seqres.full
${XFS_IO_PROG} -F -f \
-c 'falloc -k 0 128k' \
-c 'pwrite 256k 4k' \
@@ -168,7 +169,7 @@ ${XFS_IO_PROG} -F -f \
_check_ext4_eof_flag test_5 ${BIT_NOT_SET}
echo "Test 6: Fallocate 128k, seek to 256k and write a 4k block (direct io)." \
- >> $seq.full
+ >> $seqres.full
${XFS_IO_PROG} -F -f -d \
-c 'falloc -k 0 128k' \
-c 'pwrite 256k 4k' \
diff --git a/tests/shared/272 b/tests/shared/272
index 9a2a06b..93a4967 100755
--- a/tests/shared/272
+++ b/tests/shared/272
@@ -23,6 +23,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
@@ -51,11 +52,11 @@ _workout()
do
echo "OP write_opt: $write_opt 4M, \
-chattr_opt: $chattr_opt" >>$seq.full
+chattr_opt: $chattr_opt" >>$seqres.full
dd if=/dev/zero of=$SCRATCH_MNT/file.$idx \
bs=1M count=4 $write_opt \
- >> $seq.full 2>&1 || exit
- chattr $chattr_opt $SCRATCH_MNT/file.$idx >> $seq.full \
+ >> $seqres.full 2>&1 || exit
+ chattr $chattr_opt $SCRATCH_MNT/file.$idx >> $seqres.full \
|| exit
done
done
@@ -69,11 +70,11 @@ chattr_opt: $chattr_opt" >>$seq.full
do
echo "OP write_opt: $write_opt ENOSPC, \
-chattr_opt: $chattr_opt" >>$seq.full
+chattr_opt: $chattr_opt" >>$seqres.full
dd if=/dev/zero of=$SCRATCH_MNT/file.$idx \
- bs=1M $write_opt >> $seq.full 2>&1
+ bs=1M $write_opt >> $seqres.full 2>&1
chattr $chattr_opt $SCRATCH_MNT/file.$idx \
- >> $seq.full || exit
+ >> $seqres.full || exit
done
sync
unlink $SCRATCH_MNT/file.$idx
@@ -86,7 +87,7 @@ _supported_os Linux
_need_to_be_root
_require_scratch
-_scratch_mkfs_sized $((64 * 1024 * 1024)) >> $seq.full 2>&1
+_scratch_mkfs_sized $((64 * 1024 * 1024)) >> $seqres.full 2>&1
_scratch_mount
if ! _workout; then
diff --git a/tests/shared/289 b/tests/shared/289
index b057c20..825af81 100755
--- a/tests/shared/289
+++ b/tests/shared/289
@@ -24,6 +24,7 @@
owner=sandeen@xxxxxxxxxx
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
@@ -48,9 +49,9 @@ _supported_fs ext2 ext3 ext4
_supported_os Linux
_require_scratch
-rm -f $seq.full
+rm -f $seqres.full
-_scratch_mkfs >> $seq.full 2>&1
+_scratch_mkfs >> $seqres.full 2>&1
# Get the honest truth about block counts straight from metadata on disk
TOTAL_BLOCKS=`dumpe2fs -h $SCRATCH_DEV 2>/dev/null \
@@ -88,10 +89,10 @@ _scratch_mount "-o bsddf"
BSD_F_BLOCKS=`stat -f $SCRATCH_MNT | awk '/^Blocks/{print $3}'`
umount $SCRATCH_MNT
-# Echo data to $seq.full for analysis
-echo "Overhead is $OVERHEAD blocks out of $TOTAL_BLOCKS ($FREE_BLOCKS free)" >> $seq.full
-echo "MINIX free blocks $MINIX_F_BLOCKS" >> $seq.full
-echo "BSD free blocks $BSD_F_BLOCKS" >> $seq.full
+# Echo data to $seqres.full for analysis
+echo "Overhead is $OVERHEAD blocks out of $TOTAL_BLOCKS ($FREE_BLOCKS free)" >> $seqres.full
+echo "MINIX free blocks $MINIX_F_BLOCKS" >> $seqres.full
+echo "BSD free blocks $BSD_F_BLOCKS" >> $seqres.full
# minix should be exactly equal (hence tolerance of 0)
_within_tolerance "minix f_blocks" $MINIX_F_BLOCKS $TOTAL_BLOCKS 0 -v
diff --git a/tests/shared/298 b/tests/shared/298
index effd99c..ed47b4a 100644
--- a/tests/shared/298
+++ b/tests/shared/298
@@ -24,6 +24,7 @@
owner=tracek@xxxxxxxxxx
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
status=1 # failure is the default!
diff --git a/tests/shared/305 b/tests/shared/305
index 6393461..9bf7a67 100644
--- a/tests/shared/305
+++ b/tests/shared/305
@@ -26,6 +26,7 @@
owner=dmonakhov@xxxxxxxxxx
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
@@ -63,7 +64,7 @@ disallow_fail_make_request()
start_fail_scratch_dev()
{
echo "Force SCRATCH_DEV device failure"
- echo " echo 1 > /sys/block/$SCRATCH_BDEV/make-it-fail" >> $here/$seq.full
+ echo " echo 1 > /sys/block/$SCRATCH_BDEV/make-it-fail" >> $here/$seqres.full
echo 1 > /sys/block/$SCRATCH_BDEV/make-it-fail
}
@@ -71,7 +72,7 @@ start_fail_scratch_dev()
stop_fail_scratch_dev()
{
echo "Make SCRATCH_DEV device operable again"
- echo " echo 0 > /sys/block/$SCRATCH_BDEV/make-it-fail" >> $here/$seq.full
+ echo " echo 0 > /sys/block/$SCRATCH_BDEV/make-it-fail" >> $here/$seqres.full
echo 0 > /sys/block/$SCRATCH_BDEV/make-it-fail
}
@@ -140,12 +141,12 @@ _workout()
echo ""
echo "Start fsstress.."
echo ""
- echo "fsstress $args" >> $here/$seq.full
+ echo "fsstress $args" >> $here/$seqres.full
$FSSTRESS_PROG $args > /dev/null 2>&1 &
fs_pid=$!
echo "Start fio.."
- cat $tmp-$seq.fio >> $seq.full
- $FIO_PROG $tmp-$seq.fio >> $here/$seq.full 2>&1 &
+ cat $tmp-$seq.fio >> $seqres.full
+ $FIO_PROG $tmp-$seq.fio >> $here/$seqres.full 2>&1 &
fio_pid=$!
# Let's it work for awhile, and force device failure
@@ -155,7 +156,7 @@ _workout()
# that so buffered write(2) may succeed, but any integrity operations
# such as (sync, fsync, fdatasync, direct-io) should fail.
dd if=/dev/zero of=$SCRATCH_MNT/touch_failed_filesystem count=1 bs=4k conv=fsync \
- >> $here/$seq.full 2>&1 && \
+ >> $here/$seqres.full 2>&1 && \
_fail "failed: still able to perform integrity fsync on $SCRATCH_MNT"
kill $fs_pid
@@ -177,7 +178,7 @@ _workout()
# real QA test starts here
-_scratch_mkfs >> $here/$seq.full 2>&1 || _fail "mkfs failed"
+_scratch_mkfs >> $here/$seqres.full 2>&1 || _fail "mkfs failed"
_scratch_mount || _fail "mount failed"
allow_fail_make_request
_workout
diff --git a/tests/udf/098 b/tests/udf/098
index 58d2a95..dd1e9ad 100755
--- a/tests/udf/098
+++ b/tests/udf/098
@@ -30,6 +30,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
@@ -268,7 +269,7 @@ _check_udf_filesystem $SCRATCH_DEV
# optional stuff if your test has verbose output to help resolve problems
#echo
-#echo "If failure, check $seq.full (this) and $seq.full.ok (reference)"
+#echo "If failure, check $seqres.full (this) and $seqres.full.ok (reference)"
# success, all done
status=0
diff --git a/tests/udf/101 b/tests/udf/101
index 0d274e5..89507a9 100755
--- a/tests/udf/101
+++ b/tests/udf/101
@@ -23,6 +23,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
diff --git a/tests/udf/102 b/tests/udf/102
index 68407a7..bf3edd2 100755
--- a/tests/udf/102
+++ b/tests/udf/102
@@ -24,6 +24,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
diff --git a/tests/xfs/003 b/tests/xfs/003
index 79b6bc5..56dd852 100755
--- a/tests/xfs/003
+++ b/tests/xfs/003
@@ -23,6 +23,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
# get standard environment, filters and checks
diff --git a/tests/xfs/004 b/tests/xfs/004
index 8c920ae..6552a56 100755
--- a/tests/xfs/004
+++ b/tests/xfs/004
@@ -23,6 +23,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
@@ -39,8 +40,8 @@ trap "_cleanup" 0 1 2 3 15
_populate_scratch()
{
- echo "=== mkfs output ===" >>$seq.full
- _scratch_mkfs_xfs | tee -a $seq.full | _filter_mkfs 2>$tmp.mkfs
+ echo "=== mkfs output ===" >>$seqres.full
+ _scratch_mkfs_xfs | tee -a $seqres.full | _filter_mkfs 2>$tmp.mkfs
. $tmp.mkfs
_scratch_mount
dd if=/dev/zero of=$SCRATCH_MNT/foo count=200 bs=4096 >/dev/null 2>&1 &
@@ -64,7 +65,7 @@ _need_to_be_root
_require_scratch
_require_nobigloopfs
-rm -f $seq.full
+rm -f $seqres.full
_populate_scratch
@@ -72,16 +73,16 @@ _populate_scratch
eval `$DF_PROG $SCRATCH_MNT 2>&1 \
| tail -1 | $AWK_PROG '{ printf "blocks=%u used=%u avail=%u\n", $3, $4, $5 }'`
-echo "df gave: blocks=$blocks used=$used avail=$avail" >>$seq.full
-echo "blocksize from mkfs is '$dbsize'" >>$seq.full
+echo "df gave: blocks=$blocks used=$used avail=$avail" >>$seqres.full
+echo "blocksize from mkfs is '$dbsize'" >>$seqres.full
xfs_db -r -c "freesp -s" $SCRATCH_DEV >$tmp.xfs_db
-echo "xfs_db for $SCRATCH_DEV" >>$seq.full
-cat $tmp.xfs_db >>$seq.full
+echo "xfs_db for $SCRATCH_DEV" >>$seqres.full
+cat $tmp.xfs_db >>$seqres.full
eval `$XFS_IO_PROG -x -c resblks $SCRATCH_MNT 2>&1 \
| $AWK_PROG '/available/ { printf "resblks=%u\n", $5 }'`
-echo "resblks gave: resblks=$resblks" >>$seq.full
+echo "resblks gave: resblks=$resblks" >>$seqres.full
# check the 'blocks' field from freesp command is OK
# since 2.6.18, df does not report the 4 blocks per AG that cannot
diff --git a/tests/xfs/008 b/tests/xfs/008
index 0dee9f5..1f66779 100755
--- a/tests/xfs/008
+++ b/tests/xfs/008
@@ -23,6 +23,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
diff --git a/tests/xfs/009 b/tests/xfs/009
index 1883f15..3e74160 100755
--- a/tests/xfs/009
+++ b/tests/xfs/009
@@ -23,6 +23,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
diff --git a/tests/xfs/012 b/tests/xfs/012
index 10498d5..4bd2afc 100755
--- a/tests/xfs/012
+++ b/tests/xfs/012
@@ -23,6 +23,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
diff --git a/tests/xfs/016 b/tests/xfs/016
index 538ba14..fcb0637 100755
--- a/tests/xfs/016
+++ b/tests/xfs/016
@@ -36,6 +36,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
@@ -72,7 +73,7 @@ _init()
if _scratch_mkfs_xfs -N -K $force_opts >/dev/null 2>&1; then
force_opts="-K $force_opts"
fi
- echo mkfs_xfs $force_opts $SCRATCH_DEV >>$seq.full
+ echo mkfs_xfs $force_opts $SCRATCH_DEV >>$seqres.full
_scratch_mkfs_xfs $force_opts >$tmp.mkfs0 2>&1
[ $? -ne 0 ] && \
_notrun "Cannot mkfs for this test using MKFS_OPTIONS specified"
@@ -163,8 +164,8 @@ _check_corrupt()
{
f="c6c6c6c6"
echo "*** check for corruption"
- echo "expect $f..." >>$seq.full
- xfs_db -r -c "fsblock $2" -c "print" $1 | head | tee -a $seq.full | \
+ echo "expect $f..." >>$seqres.full
+ xfs_db -r -c "fsblock $2" -c "print" $1 | head | tee -a $seqres.full | \
grep -q -v "$f $f $f $f $f $f $f $f" && \
_fail "!!! block $2 corrupted!"
}
@@ -177,7 +178,7 @@ _check_corrupt()
_supported_fs xfs
_supported_os Linux
-rm -f $seq.full
+rm -f $seqres.full
# mkfs sizes
log_size=2097152
@@ -187,15 +188,15 @@ _require_scratch
_init
block=`_after_log $SCRATCH_DEV`
-echo "fsblock after log = $block" >>$seq.full
+echo "fsblock after log = $block" >>$seqres.full
_check_corrupt $SCRATCH_DEV $block
actual_log_size=`_log_size`
-echo "log size = $actual_log_size BB" >>$seq.full
+echo "log size = $actual_log_size BB" >>$seqres.full
head=`_log_head`
-echo "log position = $head" >>$seq.full
+echo "log position = $head" >>$seqres.full
lsunit=`_log_sunit`
-echo "log sunit = $lsunit" >>$seq.full
+echo "log sunit = $lsunit" >>$seqres.full
# sanity checks
[ $actual_log_size -eq $log_size_bb ] || \
@@ -206,36 +207,36 @@ echo "log sunit = $lsunit" >>$seq.full
# find how how many blocks per op for 100 ops
# ignore the fact that it will also include an unmount record etc...
# this should be small overall
-echo " lots of traffic for sampling" >>$seq.full
+echo " lots of traffic for sampling" >>$seqres.full
sample_size_ops=100
_log_traffic $sample_size_ops
head1=`_log_head`
num_blocks=`expr $head1 - $head`
blocks_per_op=`echo "scale=3; $num_blocks / $sample_size_ops" | bc`
-echo "blocks_per_op = $blocks_per_op" >>$seq.full
+echo "blocks_per_op = $blocks_per_op" >>$seqres.full
num_expected_ops=`echo "$log_size_bb / $blocks_per_op" | bc`
-echo "num_expected_ops = $num_expected_ops" >>$seq.full
+echo "num_expected_ops = $num_expected_ops" >>$seqres.full
num_expected_to_go=`echo "$num_expected_ops - $sample_size_ops" | bc`
-echo "num_expected_to_go = $num_expected_to_go" >>$seq.full
+echo "num_expected_to_go = $num_expected_to_go" >>$seqres.full
-echo " lots more traffic" >>$seq.full
+echo " lots more traffic" >>$seqres.full
_log_traffic $num_expected_to_go
head=`_log_head`
-echo "log position = $head" >>$seq.full
+echo "log position = $head" >>$seqres.full
# e.g. 3891
near_end_min=`echo "0.95 * $log_size_bb" | bc | sed 's/\..*//'`
-echo "near_end_min = $near_end_min" >>$seq.full
+echo "near_end_min = $near_end_min" >>$seqres.full
[ $head -gt $near_end_min -a $head -lt $log_size_bb ] || \
_fail "!!! unexpected near end log position $head"
for c in `seq 0 20`
do
- echo " little traffic" >>$seq.full
+ echo " little traffic" >>$seqres.full
_log_traffic 2
head=`_log_head`
- echo "log position = $head" >>$seq.full
+ echo "log position = $head" >>$seqres.full
_check_corrupt $SCRATCH_DEV $block
done
diff --git a/tests/xfs/017 b/tests/xfs/017
index 8609e17..7148a9a 100755
--- a/tests/xfs/017
+++ b/tests/xfs/017
@@ -23,6 +23,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
@@ -51,13 +52,13 @@ checkopts=""
echo "*** init FS"
-rm -f $seq.full
+rm -f $seqres.full
umount $SCRATCH_DEV >/dev/null 2>&1
-echo "*** MKFS ***" >>$seq.full
-echo "" >>$seq.full
-_scratch_mkfs_xfs >>$seq.full 2>&1 \
+echo "*** MKFS ***" >>$seqres.full
+echo "" >>$seqres.full
+_scratch_mkfs_xfs >>$seqres.full 2>&1 \
|| _fail "mkfs failed"
-_scratch_mount >>$seq.full 2>&1 \
+_scratch_mount >>$seqres.full 2>&1 \
|| _fail "mount failed"
echo "*** test"
@@ -66,21 +67,21 @@ for l in 0 1 2 3 4
do
echo " *** test $l"
FSSTRESS_ARGS=`_scale_fsstress_args -d $SCRATCH_MNT -n 1000 $FSSTRESS_AVOID`
- $FSSTRESS_PROG $FSSTRESS_ARGS >>$seq.full
+ $FSSTRESS_PROG $FSSTRESS_ARGS >>$seqres.full
_scratch_mount -o remount,ro \
|| _fail "remount ro failed"
- echo "" >>$seq.full
- echo "*** xfs_logprint ***" >>$seq.full
- echo "" >>$seq.full
- _scratch_xfs_logprint -tb | tee -a $seq.full \
+ echo "" >>$seqres.full
+ echo "*** xfs_logprint ***" >>$seqres.full
+ echo "" >>$seqres.full
+ _scratch_xfs_logprint -tb | tee -a $seqres.full \
| head | grep -q "<CLEAN>" || _fail "DIRTY LOG"
- echo "" >>$seq.full
- echo "*** XFS_CHECK ***" >>$seq.full
- echo "" >>$seq.full
- _scratch_xfs_check $checkopts >>$seq.full 2>&1 \
+ echo "" >>$seqres.full
+ echo "*** XFS_CHECK ***" >>$seqres.full
+ echo "" >>$seqres.full
+ _scratch_xfs_check $checkopts >>$seqres.full 2>&1 \
|| _fail "xfs_check $checkopts failed"
_scratch_mount -o remount,rw \
|| _fail "remount rw failed"
@@ -88,6 +89,6 @@ done
echo "*** done"
# happy exit
-rm -f $seq.full
+rm -f $seqres.full
status=0
exit 0
diff --git a/tests/xfs/018 b/tests/xfs/018
index 156cc1d..ed99f20 100755
--- a/tests/xfs/018
+++ b/tests/xfs/018
@@ -23,6 +23,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
@@ -47,7 +48,7 @@ trap "_cleanup; exit \$status" 0 1 2 3 15
_supported_fs xfs
_supported_os IRIX Linux
# prelim
-rm -f $seq.full $tmp.*
+rm -f $seqres.full $tmp.*
_require_scratch
_require_v2log
diff --git a/tests/xfs/019 b/tests/xfs/019
index 1fb0d83..c4bb681 100755
--- a/tests/xfs/019
+++ b/tests/xfs/019
@@ -23,11 +23,12 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
tmp=/tmp/$$
-seqfull="$seq.full"
+seqfull="$seqres.full"
status=1 # failure is the default!
# get standard environment, filters and checks
. ./common.rc
diff --git a/tests/xfs/021 b/tests/xfs/021
index 18fe40e..3cbf088 100755
--- a/tests/xfs/021
+++ b/tests/xfs/021
@@ -23,6 +23,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
@@ -78,7 +79,7 @@ _supported_os Linux
_require_scratch
_require_attrs
-rm -f $seq.full
+rm -f $seqres.full
umount $SCRATCH_DEV >/dev/null 2>&1
echo "*** mkfs"
@@ -124,7 +125,7 @@ echo ""
inum_2=`ls -li $testfile.2 | $AWK_PROG '{ print $1 }'`
echo "*** unmount FS"
-umount $SCRATCH_DEV >>$seq.full 2>&1 \
+umount $SCRATCH_DEV >>$seqres.full 2>&1 \
|| _fail "umount failed"
echo "*** dump attributes (1)"
diff --git a/tests/xfs/022 b/tests/xfs/022
index 962316f..0251936 100755
--- a/tests/xfs/022
+++ b/tests/xfs/022
@@ -26,6 +26,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
diff --git a/tests/xfs/023 b/tests/xfs/023
index 3e7fdd2..7bb77da 100755
--- a/tests/xfs/023
+++ b/tests/xfs/023
@@ -24,6 +24,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
diff --git a/tests/xfs/024 b/tests/xfs/024
index b7f1c10..ec5edc5 100755
--- a/tests/xfs/024
+++ b/tests/xfs/024
@@ -23,6 +23,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
@@ -42,11 +43,11 @@ _require_tape $TAPE_DEV
_create_dumpdir_fill
# ensure file/dir timestamps precede dump timestamp
sleep 2
-src/bstat $SCRATCH_MNT >>$here/$seq.full
+src/bstat $SCRATCH_MNT >>$here/$seqres.full
_erase_hard
_do_dump
_append_dumpdir_fill
-src/bstat $SCRATCH_MNT >>$here/$seq.full
+src/bstat $SCRATCH_MNT >>$here/$seqres.full
_erase_hard
_do_dump -l 1
_do_restore
diff --git a/tests/xfs/025 b/tests/xfs/025
index 4ccb5de..1e44732 100755
--- a/tests/xfs/025
+++ b/tests/xfs/025
@@ -23,6 +23,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
diff --git a/tests/xfs/026 b/tests/xfs/026
index 37a23cc..04bda76 100755
--- a/tests/xfs/026
+++ b/tests/xfs/026
@@ -23,6 +23,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
diff --git a/tests/xfs/027 b/tests/xfs/027
index 772705d..712378d 100755
--- a/tests/xfs/027
+++ b/tests/xfs/027
@@ -23,6 +23,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
diff --git a/tests/xfs/028 b/tests/xfs/028
index 0bf042f..e70bc57 100755
--- a/tests/xfs/028
+++ b/tests/xfs/028
@@ -23,6 +23,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
@@ -59,7 +60,7 @@ while [ $i -lt 5 ]; do
let i=$i+1
done
-echo "middate = $middate" >>$seq.full
+echo "middate = $middate" >>$seqres.full
#
# Now do the xfsinvutil and
diff --git a/tests/xfs/029 b/tests/xfs/029
index 70c0d10..4916c33 100755
--- a/tests/xfs/029
+++ b/tests/xfs/029
@@ -23,6 +23,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
diff --git a/tests/xfs/030 b/tests/xfs/030
index db1e454..cac66d2 100755
--- a/tests/xfs/030
+++ b/tests/xfs/030
@@ -23,6 +23,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
diff --git a/tests/xfs/031 b/tests/xfs/031
index 6c1684d..8041a19 100755
--- a/tests/xfs/031
+++ b/tests/xfs/031
@@ -23,13 +23,14 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
tmp=/tmp/$$
status=1 # failure is the default!
trap "rm -f $tmp.*; exit \$status" 0 1 2 3 15
-rm -f $seq.full
+rm -f $seqres.full
# get standard environment, filters and checks
. ./common.rc
@@ -41,15 +42,15 @@ _link_out_file $seq.out
_check_repair()
{
- echo "Repairing, round 0" >> $seq.full
- _scratch_xfs_repair 2>&1 | _filter_repair | tee -a $seq.full >$tmp.0
+ echo "Repairing, round 0" >> $seqres.full
+ _scratch_xfs_repair 2>&1 | _filter_repair | tee -a $seqres.full >$tmp.0
for i in 1 2 3 4
do
- echo "Repairing, iteration $i" | tee -a $seq.full
+ echo "Repairing, iteration $i" | tee -a $seqres.full
_scratch_xfs_repair 2>&1 | _filter_repair >$tmp.$i
- diff $tmp.0 $tmp.$i >> $seq.full
+ diff $tmp.0 $tmp.$i >> $seqres.full
if [ $? -ne 0 ]; then
- echo "ERROR: repair round $i differs to round 0 (see $seq.full)" | tee -a $seq.full
+ echo "ERROR: repair round $i differs to round 0 (see $seqres.full)" | tee -a $seqres.full
break
fi
# echo all interesting stuff...
diff --git a/tests/xfs/032 b/tests/xfs/032
index c5ba088..d090a23 100755
--- a/tests/xfs/032
+++ b/tests/xfs/032
@@ -23,13 +23,14 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
tmp=/tmp/$$
status=1 # failure is the default!
trap "rm -f $tmp.*; exit \$status" 0 1 2 3 15
-rm -f $seq.full
+rm -f $seqres.full
# get standard environment, filters and checks
. ./common.rc
@@ -69,18 +70,18 @@ do
src/devzero -n 20 $SCRATCH_DEV >/dev/null
# create a filesystem of this type
- echo "=== Creating $fs filesystem..." >>$seq.full
- echo " ( $preop mkfs -t $fs $preargs $SCRATCH_DEV $postargs )" >>$seq.full
- eval $preop mkfs -t $fs $preargs $SCRATCH_DEV $postargs >>$seq.full 2>&1
+ echo "=== Creating $fs filesystem..." >>$seqres.full
+ echo " ( $preop mkfs -t $fs $preargs $SCRATCH_DEV $postargs )" >>$seqres.full
+ eval $preop mkfs -t $fs $preargs $SCRATCH_DEV $postargs >>$seqres.full 2>&1
if [ $? -eq 0 ] ; then
# next, ensure we don't overwrite it
- echo "=== Attempting XFS overwrite of $fs..." >>$seq.full
- ${MKFS_PROG}.xfs $SCRATCH_DEV >>$seq.full 2>&1
+ echo "=== Attempting XFS overwrite of $fs..." >>$seqres.full
+ ${MKFS_PROG}.xfs $SCRATCH_DEV >>$seqres.full 2>&1
[ $? -eq 0 ] && echo "Failed - overwrote fs type ${fs}!"
else
- echo "mkfs of type ${fs} failed" >>$seq.full
+ echo "mkfs of type ${fs} failed" >>$seqres.full
fi
done
diff --git a/tests/xfs/033 b/tests/xfs/033
index 130bd27..bc53a1b 100755
--- a/tests/xfs/033
+++ b/tests/xfs/033
@@ -23,6 +23,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
diff --git a/tests/xfs/034 b/tests/xfs/034
index 27f3f22..372dead 100755
--- a/tests/xfs/034
+++ b/tests/xfs/034
@@ -23,6 +23,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
@@ -50,13 +51,13 @@ _require_scratch
echo "*** init FS"
-rm -f $seq.full
+rm -f $seqres.full
umount $SCRATCH_DEV >/dev/null 2>&1
-echo "*** MKFS ***" >>$seq.full
-echo "" >>$seq.full
-_scratch_mkfs_xfs >>$seq.full 2>&1 \
+echo "*** MKFS ***" >>$seqres.full
+echo "" >>$seqres.full
+_scratch_mkfs_xfs >>$seqres.full 2>&1 \
|| _fail "mkfs failed"
-_scratch_mount >>$seq.full 2>&1 \
+_scratch_mount >>$seqres.full 2>&1 \
|| _fail "mount failed"
echo "*** test"
@@ -69,7 +70,7 @@ then
exit
fi
-if ! src/xfsctl $SCRATCH_MNT $SCRATCH_MNT/fish >>$seq.full 2>&1
+if ! src/xfsctl $SCRATCH_MNT $SCRATCH_MNT/fish >>$seqres.full 2>&1
then
echo "!!! failed to run xfsctl test program"
exit
diff --git a/tests/xfs/035 b/tests/xfs/035
index b2fc417..cd743f6 100755
--- a/tests/xfs/035
+++ b/tests/xfs/035
@@ -23,6 +23,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
diff --git a/tests/xfs/036 b/tests/xfs/036
index e9bb411..5a7ee01 100755
--- a/tests/xfs/036
+++ b/tests/xfs/036
@@ -23,6 +23,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
diff --git a/tests/xfs/037 b/tests/xfs/037
index e2e71c5..ca10429 100755
--- a/tests/xfs/037
+++ b/tests/xfs/037
@@ -23,6 +23,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
diff --git a/tests/xfs/038 b/tests/xfs/038
index b62a4c9..64d2428 100755
--- a/tests/xfs/038
+++ b/tests/xfs/038
@@ -23,6 +23,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
diff --git a/tests/xfs/039 b/tests/xfs/039
index 428e8bb..21574d6 100755
--- a/tests/xfs/039
+++ b/tests/xfs/039
@@ -23,6 +23,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
diff --git a/tests/xfs/040 b/tests/xfs/040
index 0021c22..119a770 100755
--- a/tests/xfs/040
+++ b/tests/xfs/040
@@ -23,6 +23,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
@@ -49,9 +50,9 @@ trap "rm -f $tmp.*; exit \$status" 0 1 2 3 15
# real QA test starts here
cd "$WORKAREA/xfstests"
echo Silence is golden.
-perl tools/srcdiff -q >$seq.full
-if ! diff $seq.full $seq.good >/dev/null; then
- echo "FAILED: srcdiff output $seq.full differs to $seq.good"
+perl tools/srcdiff -q >$seqres.full
+if ! diff $seqres.full $seq.good >/dev/null; then
+ echo "FAILED: srcdiff output $seqres.full differs to $seq.good"
exit 1
fi
diff --git a/tests/xfs/041 b/tests/xfs/041
index fdb0189..a84cf02 100755
--- a/tests/xfs/041
+++ b/tests/xfs/041
@@ -25,6 +25,7 @@
set +x
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
@@ -59,7 +60,7 @@ _fill()
}
_do_die_on_error=message_only
-rm -f $seq.full
+rm -f $seqres.full
agsize=32
echo -n "Make $agsize megabyte filesystem on SCRATCH_DEV and mount... "
_scratch_mkfs_xfs -dsize=${agsize}m,agcount=1 2>&1 >/dev/null || _fail "mkfs failed"
@@ -84,7 +85,7 @@ do
echo "done"
echo -n "Check files... "
if ! _do "src/fill2fs_check $tmp.manifest"; then
- echo "fail (see $seq.full)"
+ echo "fail (see $seqres.full)"
_do "cat $tmp.manifest"
_do "ls -altrR $SCRATCH_MNT"
_do "dd if=$SCRATCH_DEV bs=4096 count=$grow_size | gzip -9 > $seq.fsimage.gz"
diff --git a/tests/xfs/042 b/tests/xfs/042
index 15fa5dc..1127b46 100755
--- a/tests/xfs/042
+++ b/tests/xfs/042
@@ -26,6 +26,7 @@
set +x
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
@@ -86,7 +87,7 @@ _cull_files()
# create 3 minimum sized (16Mb) allocation groups
# xfs_repair is going to need three to verify the superblock
-rm -f $seq.full
+rm -f $seqres.full
_do_die_on_error=message_only
echo -n "Make a 48 megabyte filesystem on SCRATCH_DEV and mount... "
@@ -147,7 +148,7 @@ echo -n "Check fill file... "
_do "sum $SCRATCH_MNT/fill >$tmp.fillsum2"
if ! _do "diff $tmp.fillsum1 $tmp.fillsum2"; then
echo "fail"
- echo "Fill file is corrupt/missing after fsr. Test failed see $seq.full"
+ echo "Fill file is corrupt/missing after fsr. Test failed see $seqres.full"
status=1; exit
fi
echo "done"
@@ -157,7 +158,7 @@ echo -n "Check large file... "
_do "sum $SCRATCH_MNT/fragmented >$tmp.sum2"
if ! _do "diff $tmp.sum1 $tmp.sum2"; then
echo "fail"
- echo "File is corrupt/missing after fsr. Test failed see $seq.full"
+ echo "File is corrupt/missing after fsr. Test failed see $seqres.full"
status=1; exit
fi
echo "done"
diff --git a/tests/xfs/043 b/tests/xfs/043
index ef92c0a..75c2d38 100755
--- a/tests/xfs/043
+++ b/tests/xfs/043
@@ -25,6 +25,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
diff --git a/tests/xfs/044 b/tests/xfs/044
index d0d8bd8..3b330b9 100755
--- a/tests/xfs/044
+++ b/tests/xfs/044
@@ -27,6 +27,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
diff --git a/tests/xfs/045 b/tests/xfs/045
index c20e3a8..9d07570 100755
--- a/tests/xfs/045
+++ b/tests/xfs/045
@@ -24,6 +24,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
diff --git a/tests/xfs/046 b/tests/xfs/046
index fb83b7a..d5f4fca 100755
--- a/tests/xfs/046
+++ b/tests/xfs/046
@@ -23,6 +23,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
diff --git a/tests/xfs/047 b/tests/xfs/047
index 7c5e896..18960ea 100755
--- a/tests/xfs/047
+++ b/tests/xfs/047
@@ -23,6 +23,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
@@ -59,7 +60,7 @@ while [ $i -lt 5 ]; do
let i=$i+1
done
-echo "middate = $middate" >>$seq.full
+echo "middate = $middate" >>$seqres.full
# Only say No to 1st question to prune
cat >$tmp.input <<EOF
diff --git a/tests/xfs/048 b/tests/xfs/048
index 6139361..a39ec66 100755
--- a/tests/xfs/048
+++ b/tests/xfs/048
@@ -23,6 +23,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
diff --git a/tests/xfs/049 b/tests/xfs/049
index c9d086a..bed36a5 100755
--- a/tests/xfs/049
+++ b/tests/xfs/049
@@ -23,6 +23,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
_cleanup()
@@ -32,10 +33,10 @@ _cleanup()
umount -d $SCRATCH_MNT/test > /dev/null 2>&1
rm -f $tmp.*
- if [ -w $seq.full ]
+ if [ -w $seqres.full ]
then
- echo "--- mounts at end (after cleanup)" >> $seq.full
- mount >> $seq.full
+ echo "--- mounts at end (after cleanup)" >> $seqres.full
+ mount >> $seqres.full
fi
}
@@ -55,7 +56,7 @@ _supported_os Linux
_log()
{
echo "--- $*"
- echo "--- $*" >> $seq.full
+ echo "--- $*" >> $seqres.full
}
_require_nobigloopfs
@@ -64,75 +65,75 @@ _require_scratch
_require_loop
_require_ext2
-rm -f $seq.full
+rm -f $seqres.full
-echo "(dev=$SCRATCH_DEV, mount=$SCRATCH_MNT)" >> $seq.full
-echo "" >> $seq.full
+echo "(dev=$SCRATCH_DEV, mount=$SCRATCH_MNT)" >> $seqres.full
+echo "" >> $seqres.full
-echo "--- mounts" >> $seq.full
-mount >> $seq.full
+echo "--- mounts" >> $seqres.full
+mount >> $seqres.full
_log "Create ext2 fs on scratch"
-mkfs -t ext2 -F $SCRATCH_DEV >> $seq.full 2>&1 \
+mkfs -t ext2 -F $SCRATCH_DEV >> $seqres.full 2>&1 \
|| _fail "!!! failed to mkfs ext2"
_log "Mount ext2 fs on scratch"
-mount -t ext2 $SCRATCH_DEV $SCRATCH_MNT >> $seq.full 2>&1 \
+mount -t ext2 $SCRATCH_DEV $SCRATCH_MNT >> $seqres.full 2>&1 \
|| _fail "!!! failed to mount"
_log "Create xfs fs in file on scratch"
${MKFS_PROG}.xfs -f -dfile,name=$SCRATCH_MNT/test.xfs,size=40m \
- >> $seq.full 2>&1 \
+ >> $seqres.full 2>&1 \
|| _fail "!!! failed to mkfs xfs"
_log "Make mount points"
-mkdir $SCRATCH_MNT/test $SCRATCH_MNT/test2 >> $seq.full 2>&1 \
+mkdir $SCRATCH_MNT/test $SCRATCH_MNT/test2 >> $seqres.full 2>&1 \
|| _fail "!!! failed to make mount points"
_log "Mount xfs via loop"
-mount -t xfs -o loop $SCRATCH_MNT/test.xfs $SCRATCH_MNT/test >> $seq.full 2>&1 \
+mount -t xfs -o loop $SCRATCH_MNT/test.xfs $SCRATCH_MNT/test >> $seqres.full 2>&1 \
|| _fail "!!! failed to loop mount xfs"
_log "stress"
-$FSSTRESS_PROG -d $SCRATCH_MNT/test -n 1000 $FSSTRESS_AVOID >> $seq.full 2>&1 \
+$FSSTRESS_PROG -d $SCRATCH_MNT/test -n 1000 $FSSTRESS_AVOID >> $seqres.full 2>&1 \
|| _fail "!!! stress failed"
_log "clean"
-rm -rf $SCRATCH_MNT/test/* >> $seq.full 2>&1 \
+rm -rf $SCRATCH_MNT/test/* >> $seqres.full 2>&1 \
|| _fail "!!! clean failed"
_log "create file for ext2 fs"
-dd if=/dev/zero of=$SCRATCH_MNT/test/test.ext2 bs=1024 count=10240 >> $seq.full 2>&1 \
+dd if=/dev/zero of=$SCRATCH_MNT/test/test.ext2 bs=1024 count=10240 >> $seqres.full 2>&1 \
|| _fail "!!! create file failed"
_log "Create ext2 fs in file on looped xfs"
-echo y | mkfs -t ext2 $SCRATCH_MNT/test/test.ext2 >> $seq.full 2>&1 \
+echo y | mkfs -t ext2 $SCRATCH_MNT/test/test.ext2 >> $seqres.full 2>&1 \
|| _fail "!!! failed to mkfs ext2 on xfs"
_log "Mount ext2 on xfs via loop"
-mount -t ext2 -o loop $SCRATCH_MNT/test/test.ext2 $SCRATCH_MNT/test2 >> $seq.full 2>&1 \
+mount -t ext2 -o loop $SCRATCH_MNT/test/test.ext2 $SCRATCH_MNT/test2 >> $seqres.full 2>&1 \
|| _fail "!!! failed to loop mount xfs"
_log "stress ext2 on xfs via loop"
-$FSSTRESS_PROG -d $SCRATCH_MNT/test2 -n 1000 $FSSTRESS_AVOID >> $seq.full 2>&1 \
+$FSSTRESS_PROG -d $SCRATCH_MNT/test2 -n 1000 $FSSTRESS_AVOID >> $seqres.full 2>&1 \
|| _fail "!!! stress ext2 failed"
_log "clean"
-rm -rf $SCRATCH_MNT/test/* >> $seq.full 2>&1 \
+rm -rf $SCRATCH_MNT/test/* >> $seqres.full 2>&1 \
|| _fail "!!! clean failed"
_log "umount ext2 on xfs"
-umount -d $SCRATCH_MNT/test2 >> $seq.full 2>&1 \
+umount -d $SCRATCH_MNT/test2 >> $seqres.full 2>&1 \
|| _fail "!!! umount ext2 failed"
_log "umount xfs"
-umount -d $SCRATCH_MNT/test >> $seq.full 2>&1 \
+umount -d $SCRATCH_MNT/test >> $seqres.full 2>&1 \
|| _fail "!!! umount xfs failed"
-echo "--- mounts at end (before cleanup)" >> $seq.full
-mount >> $seq.full
+echo "--- mounts at end (before cleanup)" >> $seqres.full
+mount >> $seqres.full
-rm -f $seq.full
+rm -f $seqres.full
# success, all done
status=0
exit
diff --git a/tests/xfs/050 b/tests/xfs/050
index 6a66032..d402cbf 100755
--- a/tests/xfs/050
+++ b/tests/xfs/050
@@ -24,6 +24,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
@@ -49,8 +50,8 @@ _supported_fs xfs
_supported_os Linux IRIX
-cp /dev/null $seq.full
-chmod a+rwx $seq.full # arbitrary users will write here
+cp /dev/null $seqres.full
+chmod a+rwx $seqres.full # arbitrary users will write here
_require_scratch
_require_xfs_quota
@@ -94,7 +95,7 @@ _filter_and_check_blks()
_exercise()
{
_scratch_mkfs_xfs | _filter_mkfs 2>$tmp.mkfs
- cat $tmp.mkfs >>$seq.full
+ cat $tmp.mkfs >>$seqres.full
# keep the blocksize and data size for dd later
. $tmp.mkfs
@@ -111,20 +112,20 @@ _exercise()
_qsetup
- echo "Using output from '" `ls -l $seq.out` "'" >>$seq.full
- echo "and using type=$type id=$id" >>$seq.full
+ echo "Using output from '" `ls -l $seq.out` "'" >>$seqres.full
+ echo "and using type=$type id=$id" >>$seqres.full
echo
- echo "*** report no quota settings" | tee -a $seq.full
+ echo "*** report no quota settings" | tee -a $seqres.full
xfs_quota -D $tmp.projects -P $tmp.projid -x \
-c "repquota -birnN -$type" $SCRATCH_DEV |
_filter_report | LC_COLLATE=POSIX sort -ru
echo
- echo "*** report initial settings" | tee -a $seq.full
+ echo "*** report initial settings" | tee -a $seqres.full
_file_as_id $SCRATCH_MNT/initme $id $type 1024 0
- echo "ls -l $SCRATCH_MNT" >>$seq.full
- ls -l $SCRATCH_MNT >>$seq.full
+ echo "ls -l $SCRATCH_MNT" >>$seqres.full
+ ls -l $SCRATCH_MNT >>$seqres.full
xfs_quota -D $tmp.projects -P $temp.projid -x \
-c "limit -$type bsoft=${bsoft}k bhard=${bhard}k $id" \
-c "limit -$type isoft=$isoft ihard=$ihard $id" \
@@ -134,7 +135,7 @@ _exercise()
_filter_report | LC_COLLATE=POSIX sort -ru
echo
- echo "*** push past the soft inode limit" | tee -a $seq.full
+ echo "*** push past the soft inode limit" | tee -a $seqres.full
_file_as_id $SCRATCH_MNT/softie1 $id $type 1024 0
_file_as_id $SCRATCH_MNT/softie2 $id $type 1024 0
_qmount
@@ -143,7 +144,7 @@ _exercise()
_filter_report | LC_COLLATE=POSIX sort -ru
echo
- echo "*** push past the soft block limit" | tee -a $seq.full
+ echo "*** push past the soft block limit" | tee -a $seqres.full
_file_as_id $SCRATCH_MNT/softie $id $type 1024 140
_qmount
xfs_quota -D $tmp.projects -P $tmp.projid -x \
@@ -152,7 +153,7 @@ _exercise()
echo
# Note: for quota accounting (not enforcement), EDQUOT is not expected
- echo "*** push past the hard inode limit (expect EDQUOT)" | tee -a $seq.full
+ echo "*** push past the hard inode limit (expect EDQUOT)" | tee -a $seqres.full
for i in 1 2 3 4 5 6 7 8 9 10 11 12
do
_file_as_id $SCRATCH_MNT/hard$i $id $type 1024 0
@@ -164,10 +165,10 @@ _exercise()
echo
# Note: for quota accounting (not enforcement), EDQUOT is not expected
- echo "*** push past the hard block limit (expect EDQUOT)" | tee -a $seq.full
+ echo "*** push past the hard block limit (expect EDQUOT)" | tee -a $seqres.full
_file_as_id $SCRATCH_MNT/softie $id $type 1024 540
- echo "ls -l $SCRATCH_MNT" >>$seq.full
- ls -l $SCRATCH_MNT >>$seq.full
+ echo "ls -l $SCRATCH_MNT" >>$seqres.full
+ ls -l $SCRATCH_MNT >>$seqres.full
_qmount
xfs_quota -D $tmp.projects -P $tmp.projid -x \
-c "repquota -birnN -$type" $SCRATCH_DEV |
diff --git a/tests/xfs/052 b/tests/xfs/052
index 01d5469..2abd78d 100755
--- a/tests/xfs/052
+++ b/tests/xfs/052
@@ -26,6 +26,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
@@ -49,7 +50,7 @@ trap "_cleanup; exit \$status" 0 1 2 3 15
_supported_fs xfs
_supported_os IRIX Linux
-rm -f $seq.full
+rm -f $seqres.full
_require_scratch
_require_xfs_quota
@@ -59,8 +60,8 @@ _require_nobody
_qmount_option uquota
_scratch_mkfs_xfs | _filter_mkfs 2>$tmp.mkfs
-cat $tmp.mkfs >>$seq.full
-chmod a+w $seq.full # arbitrary users will write here
+cat $tmp.mkfs >>$seqres.full
+chmod a+w $seqres.full # arbitrary users will write here
# keep the blocksize from mkfs ($dbsize)
. $tmp.mkfs
@@ -94,7 +95,7 @@ xfs_quota -x \
# cross check blks, softblks, hardblks <-> quota, xfs_db
xfs_quota -c "quota -$type -birnN $id" $SCRATCH_DEV |
- tr -d '\n' | tr -s '[:space:]' | tee -a $seq.full |
+ tr -d '\n' | tr -s '[:space:]' | tee -a $seqres.full |
perl -ne 'if (m[^\s*'$SCRATCH_DEV'\s+(\d+)\s+(\d+)\s+(\d+)]) {
print "used_blocks=", $1, "\n";
print "soft_blocks=", $2, "\n";
@@ -102,14 +103,14 @@ xfs_quota -c "quota -$type -birnN $id" $SCRATCH_DEV |
$next = 0;
}' | LC_COLLATE=POSIX sort >$tmp.quota
-echo ===quota output >> $seq.full
-cat $tmp.quota >> $seq.full
+echo ===quota output >> $seqres.full
+cat $tmp.quota >> $seqres.full
[ ! -s $tmp.quota ] && echo "warning: quota output file is empty"
umount $SCRATCH_MNT
# note - does (insitu) conversion from fs blocks to 1K blocks
-xfs_db -rc "dquot -$type $id" -c p $SCRATCH_DEV | tee -a $seq.full | perl -ne '
+xfs_db -rc "dquot -$type $id" -c p $SCRATCH_DEV | tee -a $seqres.full | perl -ne '
if (/^diskdq.bcount = (\d+)$/) {
print "used_blocks=", $1 * '$dbsize' / 1024, "\n";
}
@@ -120,8 +121,8 @@ xfs_db -rc "dquot -$type $id" -c p $SCRATCH_DEV | tee -a $seq.full | perl -ne '
print "soft_blocks=", $1 * '$dbsize' / 1024, "\n";
}' | LC_COLLATE=POSIX sort >$tmp.xfs_db
-echo ===xfs_db output >> $seq.full
-cat $tmp.xfs_db >> $seq.full
+echo ===xfs_db output >> $seqres.full
+cat $tmp.xfs_db >> $seqres.full
[ ! -s $tmp.xfs_db ] && echo "warning: xfs_db output file is empty"
echo Comparing out of xfs_quota and xfs_db
diff --git a/tests/xfs/054 b/tests/xfs/054
index 1ce6180..97590e8 100755
--- a/tests/xfs/054
+++ b/tests/xfs/054
@@ -24,6 +24,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
@@ -46,8 +47,8 @@ trap "_cleanup; exit \$status" 0 1 2 3 15
_supported_fs xfs
_supported_os Linux IRIX
-cp /dev/null $seq.full
-chmod ugo+rwx $seq.full
+cp /dev/null $seqres.full
+chmod ugo+rwx $seqres.full
_require_scratch
_require_xfs_quota
@@ -98,7 +99,7 @@ _exercise()
umount $SCRATCH_MNT 2>/dev/null
}
-_scratch_mkfs_xfs >> $seq.full 2>&1 || _fail "mkfs failed!"
+_scratch_mkfs_xfs >> $seqres.full 2>&1 || _fail "mkfs failed!"
_qmount_option "uquota,gquota"
_qmount
diff --git a/tests/xfs/055 b/tests/xfs/055
index 965b43a..1804727 100755
--- a/tests/xfs/055
+++ b/tests/xfs/055
@@ -23,6 +23,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
diff --git a/tests/xfs/056 b/tests/xfs/056
index be65bfb..8ab61f9 100755
--- a/tests/xfs/056
+++ b/tests/xfs/056
@@ -24,6 +24,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
diff --git a/tests/xfs/057 b/tests/xfs/057
index faa4776..fd856d7 100755
--- a/tests/xfs/057
+++ b/tests/xfs/057
@@ -23,6 +23,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
diff --git a/tests/xfs/058 b/tests/xfs/058
index dfce43b..c800286 100755
--- a/tests/xfs/058
+++ b/tests/xfs/058
@@ -23,6 +23,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
diff --git a/tests/xfs/059 b/tests/xfs/059
index a2a07c9..c26fa4d 100755
--- a/tests/xfs/059
+++ b/tests/xfs/059
@@ -23,6 +23,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
diff --git a/tests/xfs/060 b/tests/xfs/060
index f0d9870..6adce78 100755
--- a/tests/xfs/060
+++ b/tests/xfs/060
@@ -23,6 +23,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
diff --git a/tests/xfs/061 b/tests/xfs/061
index fa98085..e5a8413 100755
--- a/tests/xfs/061
+++ b/tests/xfs/061
@@ -23,6 +23,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
diff --git a/tests/xfs/063 b/tests/xfs/063
index cdaf524..a2ee188 100755
--- a/tests/xfs/063
+++ b/tests/xfs/063
@@ -23,6 +23,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
diff --git a/tests/xfs/064 b/tests/xfs/064
index c7e727c..9ba542e 100755
--- a/tests/xfs/064
+++ b/tests/xfs/064
@@ -23,6 +23,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
@@ -66,14 +67,14 @@ while [ $i -le 9 ]; do
_stable_fs
sleep 2
- echo "********* level $i ***********" >>$seq.full
- date >>$seq.full
+ echo "********* level $i ***********" >>$seqres.full
+ date >>$seqres.full
find $SCRATCH_MNT -exec $here/src/lstat64 {} \; | sed 's/(00.*)//' >$tmp.dates.$i
if [ $i -gt 0 ]; then
let level_1=$i-1
- diff -c $tmp.dates.$level_1 $tmp.dates.$i >>$seq.full
+ diff -c $tmp.dates.$level_1 $tmp.dates.$i >>$seqres.full
else
- cat $tmp.dates.$i >>$seq.full
+ cat $tmp.dates.$i >>$seqres.full
fi
_do_dump_file -f $tmp.df.level$i -l $i
diff --git a/tests/xfs/065 b/tests/xfs/065
index 12f2ac9..ef1d10f 100755
--- a/tests/xfs/065
+++ b/tests/xfs/065
@@ -26,6 +26,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
diff --git a/tests/xfs/066 b/tests/xfs/066
index 7a68f79..8709a2b 100755
--- a/tests/xfs/066
+++ b/tests/xfs/066
@@ -23,6 +23,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
diff --git a/tests/xfs/067 b/tests/xfs/067
index baaed77..87b3cc9 100755
--- a/tests/xfs/067
+++ b/tests/xfs/067
@@ -23,6 +23,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
@@ -46,14 +47,14 @@ _require_scratch
# set up fs for 1K inodes
isize=0
-_scratch_mkfs_xfs | _filter_mkfs >$seq.full 2>$tmp.mkfs
+_scratch_mkfs_xfs | _filter_mkfs >$seqres.full 2>$tmp.mkfs
[ $? -eq 0 ] && source $tmp.mkfs
if [ "$isize" -lt 1024 ]; then
- _scratch_mkfs_xfs -i size=1024 >>$here/$seq.full \
+ _scratch_mkfs_xfs -i size=1024 >>$here/$seqres.full \
|| _notrun "Cannot mkfs for this test using MKFS_OPTIONS specified"
fi
-_scratch_mount >>$here/$seq.full || _fail "mount failed"
-xfs_info $SCRATCH_MNT >>$here/$seq.full
+_scratch_mount >>$here/$seqres.full || _fail "mount failed"
+xfs_info $SCRATCH_MNT >>$here/$seqres.full
cd $SCRATCH_MNT
echo ""
diff --git a/tests/xfs/071 b/tests/xfs/071
index c135d1a..b22dd6d 100755
--- a/tests/xfs/071
+++ b/tests/xfs/071
@@ -22,8 +22,9 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
-rm -f $seq.full
+rm -f $seqres.full
here=`pwd`
tmp=/tmp/$$
@@ -81,19 +82,19 @@ write_block()
[ `$direct` ] && flags=-d
echo "Writing $bytes bytes, offset is $words (direct=$direct)" | _filter_io
- echo "Writing $bytes bytes at $location $words (direct=$direct)" >>$seq.full
+ echo "Writing $bytes bytes at $location $words (direct=$direct)" >>$seqres.full
$XFS_IO_PROG -c "pwrite $offset 512" $flags $SCRATCH_MNT/$seq \
- 2>&1 | _filter_off $offset | tee -a $seq.full | _filter_pwrite
- xfs_bmap -v $SCRATCH_MNT/$seq >>$seq.full
+ 2>&1 | _filter_off $offset | tee -a $seqres.full | _filter_pwrite
+ xfs_bmap -v $SCRATCH_MNT/$seq >>$seqres.full
echo "Reading $bytes bytes (direct=$direct)" | _filter_io
- echo "Reading $bytes bytes at $location (direct=$direct)" >>$seq.full
+ echo "Reading $bytes bytes at $location (direct=$direct)" >>$seqres.full
$XFS_IO_PROG -c "pread $offset $bytes" $flags $SCRATCH_MNT/$seq \
- 2>&1 | _filter_off $offset | tee -a $seq.full | _filter_pread
+ 2>&1 | _filter_off $offset | tee -a $seqres.full | _filter_pread
- $XFS_IO_PROG -c "pread -v $offset $bytes" $flags $SCRATCH_MNT/$seq >>$seq.full 2>&1
+ $XFS_IO_PROG -c "pread -v $offset $bytes" $flags $SCRATCH_MNT/$seq >>$seqres.full 2>&1
- echo | tee -a $seq.full
+ echo | tee -a $seqres.full
}
# real QA test starts here
diff --git a/tests/xfs/072 b/tests/xfs/072
index 930a983..d5bec3c 100755
--- a/tests/xfs/072
+++ b/tests/xfs/072
@@ -23,6 +23,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
_cleanup()
@@ -49,7 +50,7 @@ _supported_os IRIX Linux
_require_scratch
-rm -f $seq.full
+rm -f $seqres.full
umount $SCRATCH_DEV >/dev/null 2>&1
_scratch_mkfs_xfs >/dev/null || _fail "mkfs failed"
diff --git a/tests/xfs/073 b/tests/xfs/073
index 3a5129f..2ed2e97 100755
--- a/tests/xfs/073
+++ b/tests/xfs/073
@@ -23,6 +23,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
diff --git a/tests/xfs/078 b/tests/xfs/078
index 901723e..df4fc6f 100755
--- a/tests/xfs/078
+++ b/tests/xfs/078
@@ -23,6 +23,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
diff --git a/tests/xfs/080 b/tests/xfs/080
index 3243fe1..fb5b6a6 100755
--- a/tests/xfs/080
+++ b/tests/xfs/080
@@ -23,6 +23,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
diff --git a/tests/xfs/081 b/tests/xfs/081
index f0ee819..44018bc 100755
--- a/tests/xfs/081
+++ b/tests/xfs/081
@@ -23,6 +23,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
@@ -50,7 +51,7 @@ _cleanup()
trap "_cleanup; exit \$status" 0 1 2 3 15
# prelim
-rm -f $seq.full $tmp.*
+rm -f $seqres.full $tmp.*
_require_scratch
_require_xfs_quota
_require_v2log
diff --git a/tests/xfs/082 b/tests/xfs/082
index e21a793..652f362 100755
--- a/tests/xfs/082
+++ b/tests/xfs/082
@@ -23,6 +23,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
@@ -48,7 +49,7 @@ _supported_fs xfs
_supported_os IRIX Linux
# prelim
-rm -f $seq.full $tmp.*
+rm -f $seqres.full $tmp.*
_require_scratch
_require_v2log
diff --git a/tests/xfs/084 b/tests/xfs/084
index ba5743a..46aa837 100755
--- a/tests/xfs/084
+++ b/tests/xfs/084
@@ -24,6 +24,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
diff --git a/tests/xfs/085 b/tests/xfs/085
index 44123ad..a02c42d 100755
--- a/tests/xfs/085
+++ b/tests/xfs/085
@@ -26,6 +26,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
@@ -42,24 +43,24 @@ trap "rm -f $tmp.*; exit \$status" 0 1 2 3 15
_supported_fs xfs
_supported_os IRIX Linux
-rm -f $seq.full
+rm -f $seqres.full
rm -f $tmp.log
_require_scratch
echo "mkfs"
-_scratch_mkfs_xfs >>$seq.full 2>&1 \
+_scratch_mkfs_xfs >>$seqres.full 2>&1 \
|| _fail "mkfs scratch failed"
echo "mount"
-_scratch_mount >>$seq.full 2>&1 \
+_scratch_mount >>$seqres.full 2>&1 \
|| _fail "mount failed: $MOUNT_OPTIONS"
echo "touch files"
touch $SCRATCH_MNT/{0,1,2,3,4,5,6,7,8,9}{0,1,2,3,4,5,6,7,8,9}
echo "godown"
-src/godown -v -f $SCRATCH_MNT >> $seq.full
+src/godown -v -f $SCRATCH_MNT >> $seqres.full
echo "unmount"
umount $SCRATCH_MNT
@@ -75,7 +76,7 @@ if false; then
fi
echo "mount with replay"
-_scratch_mount $mnt >>$seq.full 2>&1 \
+_scratch_mount $mnt >>$seqres.full 2>&1 \
|| _fail "mount failed: $mnt $MOUNT_OPTIONS"
echo "ls SCRATCH_MNT"
diff --git a/tests/xfs/086 b/tests/xfs/086
index b59ad0a..2e2d4cf 100755
--- a/tests/xfs/086
+++ b/tests/xfs/086
@@ -25,6 +25,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
@@ -41,7 +42,7 @@ trap "rm -f $tmp.*; exit \$status" 0 1 2 3 15
_supported_fs xfs
_supported_os IRIX Linux
-rm -f $seq.full $tmp.*
+rm -f $seqres.full $tmp.*
_require_scratch
_require_v2log
@@ -83,7 +84,7 @@ for s in sync nosync ; do
# mkfs the FS
_echofull "mkfs"
- _scratch_mkfs_xfs >>$seq.full 2>&1
+ _scratch_mkfs_xfs >>$seqres.full 2>&1
if [ $? -ne 0 ] ; then
_echofull "mkfs failed: $MKFS_OPTIONS"
continue
@@ -91,7 +92,7 @@ for s in sync nosync ; do
# mount the FS
_echofull "mount"
- if ! _scratch_mount >>$seq.full 2>&1; then
+ if ! _scratch_mount >>$seqres.full 2>&1; then
_echofull "mount failed: $MOUNT_OPTIONS"
continue
fi
@@ -116,17 +117,17 @@ for s in sync nosync ; do
ls $SCRATCH_MNT
_echofull "godown"
- src/godown -v -f $SCRATCH_MNT >> $seq.full
+ src/godown -v -f $SCRATCH_MNT >> $seqres.full
_echofull "unmount"
- umount $SCRATCH_DEV >>$seq.full 2>&1 \
+ umount $SCRATCH_DEV >>$seqres.full 2>&1 \
|| _fail "umount failed"
_echofull "logprint after going down..."
_print_logstate
_echofull "mount with replay"
- _scratch_mount >>$seq.full 2>&1 \
+ _scratch_mount >>$seqres.full 2>&1 \
|| _fail "mount failed: $MOUNT_OPTIONS"
# check on what FS looks like after log recovery
diff --git a/tests/xfs/087 b/tests/xfs/087
index 3cb6990..65812f6 100755
--- a/tests/xfs/087
+++ b/tests/xfs/087
@@ -25,6 +25,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
@@ -46,7 +47,7 @@ _do_meta()
-f rename=30 -f stat=30 -f unlink=30 -f truncate=20"
_echofull "calling fsstress $param -m8 -n $count"
FSSTRESS_ARGS=`_scale_fsstress_args $param $FSSTRESS_AVOID -m 8 -n $count -d $out`
- if ! $FSSTRESS_PROG $FSSTRESS_ARGS >>$seq.full 2>&1
+ if ! $FSSTRESS_PROG $FSSTRESS_ARGS >>$seqres.full 2>&1
then
_echofull "fsstress failed"
fi
@@ -56,7 +57,7 @@ _do_meta()
_supported_fs xfs
_supported_os IRIX Linux
-rm -f $seq.full $tmp.*
+rm -f $seqres.full $tmp.*
_require_scratch
_require_v2log
_require_xfs_quota
@@ -91,7 +92,7 @@ do
# mkfs the FS
_echofull "mkfs"
- _scratch_mkfs_xfs >>$seq.full 2>&1
+ _scratch_mkfs_xfs >>$seqres.full 2>&1
if [ $? -ne 0 ] ; then
_echofull "mkfs failed: $MKFS_OPTIONS"
continue
@@ -99,7 +100,7 @@ do
# mount the FS
_echofull "mount"
- if ! _scratch_mount -o uquota >>$seq.full 2>&1; then
+ if ! _scratch_mount -o uquota >>$seqres.full 2>&1; then
_echofull "mount failed: $MOUNT_OPTIONS"
continue
fi
@@ -112,20 +113,20 @@ do
ls -RF $SCRATCH_MNT >$tmp.ls1
_echofull "godown"
- src/godown -v -f $SCRATCH_MNT >> $seq.full
+ src/godown -v -f $SCRATCH_MNT >> $seqres.full
_echofull "unmount"
- umount $SCRATCH_DEV >>$seq.full 2>&1 \
+ umount $SCRATCH_DEV >>$seqres.full 2>&1 \
|| _fail "umount failed"
_echofull "logprint after going down..."
_print_logstate
_full "logprint headers"
- _scratch_xfs_logprint -n >>$seq.full 2>&1
+ _scratch_xfs_logprint -n >>$seqres.full 2>&1
_echofull "mount with replay"
- _scratch_mount -o uquota >>$seq.full 2>&1 \
+ _scratch_mount -o uquota >>$seqres.full 2>&1 \
|| _fail "mount failed: $MOUNT_OPTIONS"
# check on what FS looks like after log recovery
diff --git a/tests/xfs/090 b/tests/xfs/090
index 8ce50c0..8477329 100755
--- a/tests/xfs/090
+++ b/tests/xfs/090
@@ -23,6 +23,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
diff --git a/tests/xfs/092 b/tests/xfs/092
index 4e73cd9..c84f72c 100755
--- a/tests/xfs/092
+++ b/tests/xfs/092
@@ -23,6 +23,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
diff --git a/tests/xfs/094 b/tests/xfs/094
index 4f4cf34..6aa2d74 100755
--- a/tests/xfs/094
+++ b/tests/xfs/094
@@ -23,6 +23,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
diff --git a/tests/xfs/095 b/tests/xfs/095
index 9de4476..9a74d5f 100755
--- a/tests/xfs/095
+++ b/tests/xfs/095
@@ -23,6 +23,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
diff --git a/tests/xfs/096 b/tests/xfs/096
index ecadd73..0fef425 100755
--- a/tests/xfs/096
+++ b/tests/xfs/096
@@ -24,6 +24,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
@@ -63,7 +64,7 @@ _cleanup()
#
_mkfs_filter()
{
- tee -a $seq.full | \
+ tee -a $seqres.full | \
sed \
-e 's/extsz=[0-9][0-9]*[ ]*/extsz=N, /' \
-e 's/blocks=[0-9][0-9]*/blocks=N/' \
@@ -88,7 +89,7 @@ _mkfs_filter()
}
# real QA test starts here
-rm -f $seq.full
+rm -f $seqres.full
# Modify as appropriate.
_supported_fs xfs
diff --git a/tests/xfs/103 b/tests/xfs/103
index 02c3f9d..2d4fd48 100755
--- a/tests/xfs/103
+++ b/tests/xfs/103
@@ -23,6 +23,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
diff --git a/tests/xfs/104 b/tests/xfs/104
index 59db760..b0588e8 100755
--- a/tests/xfs/104
+++ b/tests/xfs/104
@@ -23,6 +23,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
@@ -37,7 +38,7 @@ trap "rm -f $tmp.*; exit \$status" 0 1 2 3 15
_create_scratch()
{
echo "*** mkfs"
- _scratch_mkfs_xfs $@ | tee -a $seq.full | _filter_mkfs 2>$tmp.mkfs
+ _scratch_mkfs_xfs $@ | tee -a $seqres.full | _filter_mkfs 2>$tmp.mkfs
. $tmp.mkfs
echo "*** mount"
@@ -64,13 +65,13 @@ _stress_scratch()
# -w ensures that the only ops are ones which cause write I/O
FSSTRESS_ARGS=`_scale_fsstress_args -d $SCRATCH_MNT -w -p $procs \
-n $nops $FSSTRESS_AVOID`
- $FSSTRESS_PROG $FSSTRESS_ARGS >> $seq.full &
+ $FSSTRESS_PROG $FSSTRESS_ARGS >> $seqres.full &
}
# real QA test starts here
_supported_fs xfs
_require_scratch
-_scratch_mkfs_xfs | tee -a $seq.full | _filter_mkfs 2>$tmp.mkfs
+_scratch_mkfs_xfs | tee -a $seqres.full | _filter_mkfs 2>$tmp.mkfs
. $tmp.mkfs # extract blocksize and data size for scratch device
endsize=`expr 550 \* 1048576` # stop after growing this big
@@ -95,19 +96,19 @@ _fill_scratch $fillsize
#
while [ $size -le $endsize ]; do
echo "*** stressing a ${size} byte filesystem"
- echo "*** stressing a ${sizeb} block filesystem" >> $seq.full
+ echo "*** stressing a ${sizeb} block filesystem" >> $seqres.full
_stress_scratch
sleep 1
size=`expr $size + $incsize`
sizeb=`expr $size / $dbsize` # in data blocks
echo "*** growing to a ${size} byte filesystem"
- echo "*** growing to a ${sizeb} block filesystem" >> $seq.full
+ echo "*** growing to a ${sizeb} block filesystem" >> $seqres.full
xfs_growfs -D ${sizeb} $SCRATCH_MNT \
- | tee -a $seq.full | _filter_mkfs 2>$tmp.growfs
+ | tee -a $seqres.full | _filter_mkfs 2>$tmp.growfs
. $tmp.growfs
[ `expr $size % $modsize` -eq 0 ] && wait # every 4th iteration
- echo AGCOUNT=$agcount | tee -a $seq.full
- echo && echo >> $seq.full
+ echo AGCOUNT=$agcount | tee -a $seqres.full
+ echo && echo >> $seqres.full
done
wait # stop for any remaining stress processes
diff --git a/tests/xfs/106 b/tests/xfs/106
index e8f1d45..651fe00 100755
--- a/tests/xfs/106
+++ b/tests/xfs/106
@@ -25,6 +25,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
@@ -44,7 +45,7 @@ _require_xfs_quota
# real QA test starts here
_scratch_mkfs_xfs | _filter_mkfs 2>$tmp.mkfs
-cat $tmp.mkfs >$seq.full
+cat $tmp.mkfs >$seqres.full
. $tmp.mkfs
# setup a default run
@@ -115,7 +116,7 @@ s/Inode: \#\d+ \(\d+ blocks, \d+ extents\)/Inode: #[INO] (X blocks, Y extents)/;
test_quot()
{
echo "checking quot command (type=$type)" # not deterministic on blks
- xfs_quota -x -c "quot -n -$type" $SCRATCH_MNT >>$seq.full 2>&1
+ xfs_quota -x -c "quot -n -$type" $SCRATCH_MNT >>$seqres.full 2>&1
}
test_report()
diff --git a/tests/xfs/107 b/tests/xfs/107
index 2c98b57..e2300ce 100755
--- a/tests/xfs/107
+++ b/tests/xfs/107
@@ -25,6 +25,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
@@ -56,7 +57,7 @@ _require_xfs_quota
# real QA test starts here
_scratch_mkfs_xfs | _filter_mkfs 2>$tmp.mkfs
-cat $tmp.mkfs >$seq.full
+cat $tmp.mkfs >$seqres.full
. $tmp.mkfs
# setup a default run
@@ -72,7 +73,7 @@ _require_prjquota $SCRATCH_DEV
echo "### create projects file"
rm -f $tmp.projects
target=$SCRATCH_MNT/project
-echo "6:$target" | tee -a $seq.full > $tmp.projects
+echo "6:$target" | tee -a $seqres.full > $tmp.projects
echo "### populate filesystem"
mkdir $target || exit
diff --git a/tests/xfs/108 b/tests/xfs/108
index 6b656e6..809659d 100755
--- a/tests/xfs/108
+++ b/tests/xfs/108
@@ -23,6 +23,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
@@ -57,15 +58,15 @@ test_files()
test_accounting()
{
echo "### some controlled buffered, direct and mmapd IO (type=$type)"
- echo "--- initiating parallel IO..." >>$seq.full
+ echo "--- initiating parallel IO..." >>$seqres.full
$XFS_IO_PROG -c 'pwrite -b 1m 0 16m' -c 'fsync' \
- $SCRATCH_MNT/buffer >>$seq.full 2>&1 &
+ $SCRATCH_MNT/buffer >>$seqres.full 2>&1 &
$XFS_IO_PROG -c 'pwrite -b 1m 0 16m' -d \
- $SCRATCH_MNT/direct >>$seq.full 2>&1 &
+ $SCRATCH_MNT/direct >>$seqres.full 2>&1 &
$XFS_IO_PROG -c 't 16m' -c 'mm -rw 0 16m' -c 'mw 0 16m' -c 'ms -s' \
- $SCRATCH_MNT/mmap >>$seq.full 2>&1 &
+ $SCRATCH_MNT/mmap >>$seqres.full 2>&1 &
wait
- echo "--- completed parallel IO ($type)" >>$seq.full
+ echo "--- completed parallel IO ($type)" >>$seqres.full
for file in $SCRATCH_MNT/{buffer,direct,mmap}; do
$here/src/lstat64 $file | head -3 | _filter_scratch
@@ -80,10 +81,10 @@ _qmount
_require_prjquota $SCRATCH_DEV
# real QA test starts here
-rm -f $tmp.projects $seq.full
+rm -f $tmp.projects $seqres.full
umount $SCRATCH_DEV 2>/dev/null
_scratch_mkfs_xfs | _filter_mkfs 2>$tmp.mkfs
-cat $tmp.mkfs >>$seq.full
+cat $tmp.mkfs >>$seqres.full
_scratch_mount
uid=1
diff --git a/tests/xfs/109 b/tests/xfs/109
index 56364f4..2e36d0f 100755
--- a/tests/xfs/109
+++ b/tests/xfs/109
@@ -23,6 +23,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
@@ -102,7 +103,7 @@ fi
umount $SCRATCH_DEV
_scratch_mkfs_xfs -dsize=160m,agcount=4 $faststart | _filter_mkfs 2>$tmp.mkfs
-cat $tmp.mkfs >>$seq.full
+cat $tmp.mkfs >>$seqres.full
_scratch_mount
populate
diff --git a/tests/xfs/110 b/tests/xfs/110
index 8749afa..a2790c8 100755
--- a/tests/xfs/110
+++ b/tests/xfs/110
@@ -23,6 +23,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
diff --git a/tests/xfs/111 b/tests/xfs/111
index 8f4c142..af7cd65 100755
--- a/tests/xfs/111
+++ b/tests/xfs/111
@@ -23,6 +23,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
diff --git a/tests/xfs/114 b/tests/xfs/114
index a4ba98d..954eaff 100755
--- a/tests/xfs/114
+++ b/tests/xfs/114
@@ -23,6 +23,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
@@ -79,8 +80,8 @@ _test_create()
p=dir2/dir3/dir4/file4
touch $p
- #_print_names $p >>$here/$seq.full
- _print_names $p | tee -a $here/$seq.full
+ #_print_names $p >>$here/$seqres.full
+ _print_names $p | tee -a $here/$seqres.full
_check_paths $SCRATCH_MNT/$p
}
@@ -130,13 +131,13 @@ _test_hardlink()
ln $p $x
done
- _print_names $p >>$here/$seq.full
+ _print_names $p >>$here/$seqres.full
echo ""
echo "print out names and check after created hardlinks"
echo ""
for x in $paths; do
- _print_names $x | tee -a $here/$seq.full
+ _print_names $x | tee -a $here/$seqres.full
_check_paths $SCRATCH_MNT/$x
done
@@ -160,7 +161,7 @@ _test_hardlink()
echo ""
for x in $paths; do
if [ -e $x ]; then
- _print_names $x | tee -a $here/$seq.full
+ _print_names $x | tee -a $here/$seqres.full
_check_paths $SCRATCH_MNT/$x
fi
done
@@ -229,7 +230,7 @@ _test_rename()
_filter_num()
{
- tee -a $here/$seq.full |\
+ tee -a $here/$seqres.full |\
sed -e 's/[0-9][0-9]* inodes/I inodes/g' \
-e 's/[0-9][0-9]* paths/P paths/g' \
-e 's/seed = [0-9][0-9]*/seed = S/'
@@ -254,7 +255,7 @@ _test_fsstress()
if ! $FSSTRESS_PROG $args | _filter_num
then
echo " fsstress $args returned $?"
- cat $tmp.out | tee -a $here/$seq.full
+ cat $tmp.out | tee -a $here/$seqres.full
status=1
fi
@@ -283,8 +284,8 @@ _test_dirstress()
if ! $here/src/dirstress $args >$tmp.out 2>&1 | _filter_num
then
echo " dirstress failed"
- echo "*** dirstress $args" | tee -a $here/$seq.full
- cat $tmp.out >>$here/$seq.full
+ echo "*** dirstress $args" | tee -a $here/$seqres.full
+ cat $tmp.out >>$here/$seqres.full
status=1
exit
fi
@@ -294,8 +295,8 @@ _test_dirstress()
if ! $here/src/dirstress $args >$tmp.out 2>&1 | _filter_num
then
echo " dirstress failed"
- echo "*** dirstress $args" | tee -a $here/$seq.full
- cat $tmp.out >>$here/$seq.full
+ echo "*** dirstress $args" | tee -a $here/$seqres.full
+ cat $tmp.out >>$here/$seqres.full
status=1
exit
fi
@@ -315,16 +316,16 @@ _require_scratch
_require_attrs
_need_to_be_root
-rm -f $here/$seq.full
+rm -f $here/$seqres.full
echo "mkfs"
-_scratch_mkfs_xfs >>$here/$seq.full 2>&1 \
+_scratch_mkfs_xfs >>$here/$seqres.full 2>&1 \
|| _fail "mkfs scratch failed"
-_scratch_mkfs_xfs -i parent=1 >>$here/$seq.full 2>&1 \
+_scratch_mkfs_xfs -i parent=1 >>$here/$seqres.full 2>&1 \
|| _notrun "parent inodes not supported"
echo "mount"
-_scratch_mount >>$here/$seq.full 2>&1 \
+_scratch_mount >>$here/$seqres.full 2>&1 \
|| _fail "mount failed: $MOUNT_OPTIONS"
# real QA test starts here
diff --git a/tests/xfs/115 b/tests/xfs/115
index ebcc995..aa281d6 100755
--- a/tests/xfs/115
+++ b/tests/xfs/115
@@ -23,6 +23,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
@@ -101,16 +102,16 @@ _supported_os IRIX
_require_scratch
_require_attrs
-rm -f $here/$seq.full
+rm -f $here/$seqres.full
echo "mkfs"
-_scratch_mkfs_xfs >>$here/$seq.full 2>&1 \
+_scratch_mkfs_xfs >>$here/$seqres.full 2>&1 \
|| _fail "mkfs scratch failed"
-_scratch_mkfs_xfs -i paths=1 >>$here/$seq.full 2>&1 \
+_scratch_mkfs_xfs -i paths=1 >>$here/$seqres.full 2>&1 \
|| _notrun "i_paths not supported"
echo "mount"
-_scratch_mount >>$here/$seq.full 2>&1 \
+_scratch_mount >>$here/$seqres.full 2>&1 \
|| _fail "mount failed: $MOUNT_OPTIONS"
# real QA test starts here
@@ -251,7 +252,7 @@ _do_test()
xfs_repair_ipaths -n $SCRATCH_MNT
}
-_do_test 2>&1 | tee $seq.full | _filter_inodes
+_do_test 2>&1 | tee $seqres.full | _filter_inodes
# success, all done
status=0
diff --git a/tests/xfs/116 b/tests/xfs/116
index 2c3ab92..4554d20 100755
--- a/tests/xfs/116
+++ b/tests/xfs/116
@@ -25,6 +25,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
diff --git a/tests/xfs/118 b/tests/xfs/118
index d140a8b..e4ce711 100755
--- a/tests/xfs/118
+++ b/tests/xfs/118
@@ -25,6 +25,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
@@ -72,7 +73,7 @@ _chowning_file()
echo "mkfs on scratch"
-_scratch_mkfs_xfs >$seq.full
+_scratch_mkfs_xfs >$seqres.full
echo "mount with quotas"
export MOUNT_OPTIONS="-o uquota"
diff --git a/tests/xfs/119 b/tests/xfs/119
index 85af211..066ddbd 100755
--- a/tests/xfs/119
+++ b/tests/xfs/119
@@ -25,6 +25,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
diff --git a/tests/xfs/121 b/tests/xfs/121
index a590bb0..f6dc83a 100755
--- a/tests/xfs/121
+++ b/tests/xfs/121
@@ -27,6 +27,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
@@ -43,17 +44,17 @@ trap "rm -f $tmp.*; exit \$status" 0 1 2 3 15
_supported_fs xfs
_supported_os IRIX Linux
-rm -f $seq.full
+rm -f $seqres.full
rm -f $tmp.log
_require_scratch
echo "mkfs"
-_scratch_mkfs_xfs >>$seq.full 2>&1 \
+_scratch_mkfs_xfs >>$seqres.full 2>&1 \
|| _fail "mkfs scratch failed"
echo "mount"
-_scratch_mount >>$seq.full 2>&1 \
+_scratch_mount >>$seqres.full 2>&1 \
|| _fail "mount failed: $MOUNT_OPTIONS"
# num_files must be greater than 64 (XFS_AGI_UNLINKED_BUCKETS)
@@ -68,7 +69,7 @@ src/multi_open_unlink -f $SCRATCH_MNT/test_file -n $num_files -s $delay &
sleep 3
echo "godown"
-src/godown -v -f $SCRATCH_MNT >> $seq.full
+src/godown -v -f $SCRATCH_MNT >> $seqres.full
# time for multi_open_unlink to exit out after its delay
# so we have no references and can unmount
@@ -81,11 +82,11 @@ echo "logprint after going down..."
_print_logstate
echo "mount with replay"
-_scratch_mount $mnt >>$seq.full 2>&1 \
+_scratch_mount $mnt >>$seqres.full 2>&1 \
|| _fail "mount failed: $mnt $MOUNT_OPTIONS"
echo "godown"
-src/godown -v -f $SCRATCH_MNT >> $seq.full
+src/godown -v -f $SCRATCH_MNT >> $seqres.full
echo "unmount"
umount $SCRATCH_MNT
@@ -94,7 +95,7 @@ echo "logprint after going down..."
_print_logstate
echo "logprint to check for CLEAR_AGI_BUCKET..."
-if _scratch_xfs_logprint -t | tee -a $seq.full | grep CLEAR; then
+if _scratch_xfs_logprint -t | tee -a $seqres.full | grep CLEAR; then
echo 'CLEAR_AGI_BUCKET transactions found!!'
echo 'Are you running with an old xfs kernel - where the bug still exists?'
else
@@ -102,7 +103,7 @@ else
fi
# clean up dirty log with log recovery on mount
-_scratch_mount >> $seq.full 2>&1 \
+_scratch_mount >> $seqres.full 2>&1 \
|| _fail "mount failed"
# should now be peaches
diff --git a/tests/xfs/122 b/tests/xfs/122
index 1c4f3a4..2a81728 100755
--- a/tests/xfs/122
+++ b/tests/xfs/122
@@ -25,6 +25,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
@@ -176,7 +177,7 @@ echo 'int main(int argc, char *argv[]) {' >>$cprog
#
cat /usr/include/xfs/xfs*.h | indent |\
_attribute_filter |\
-tee $seq.full |\
+tee $seqres.full |\
egrep '} *xfs_.*_t' |\
egrep -v -f $tmp.ignore |\
awk '{sub(/[;,]/,"",$2); print "printf(\"sizeof(", $2, ") = %d\\n\", sizeof(", $2, "));"}' \
@@ -198,8 +199,8 @@ awk '
echo 'return 0; }' >>$cprog
# create and run program
-cc -o $oprog $cprog >> $seq.full 2>&1 || \
- _notrun "Could not compile test program (see end of $seq.full)"
+cc -o $oprog $cprog >> $seqres.full 2>&1 || \
+ _notrun "Could not compile test program (see end of $seqres.full)"
$oprog | _type_size_filter | _type_name_filter > $progout
#
diff --git a/tests/xfs/134 b/tests/xfs/134
index 2117b4a..f38fc6e 100755
--- a/tests/xfs/134
+++ b/tests/xfs/134
@@ -24,6 +24,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
@@ -60,8 +61,8 @@ cat >$tmp.projid <<EOF
test:1
EOF
-cp /dev/null $seq.full
-chmod a+rwx $seq.full # arbitrary users will write here
+cp /dev/null $seqres.full
+chmod a+rwx $seqres.full # arbitrary users will write here
_require_scratch
_scratch_mkfs_xfs >/dev/null 2>&1
diff --git a/tests/xfs/136 b/tests/xfs/136
index 6479c8c..ec3f71a 100755
--- a/tests/xfs/136
+++ b/tests/xfs/136
@@ -25,6 +25,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
diff --git a/tests/xfs/137 b/tests/xfs/137
index 0f65d08..5c0fc51 100755
--- a/tests/xfs/137
+++ b/tests/xfs/137
@@ -23,6 +23,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
diff --git a/tests/xfs/138 b/tests/xfs/138
index f8af8dd..a0aeb82 100755
--- a/tests/xfs/138
+++ b/tests/xfs/138
@@ -23,6 +23,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
diff --git a/tests/xfs/139 b/tests/xfs/139
index 7d2e409..9de1fca 100755
--- a/tests/xfs/139
+++ b/tests/xfs/139
@@ -23,6 +23,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
diff --git a/tests/xfs/140 b/tests/xfs/140
index a8cbd09..8564b28 100755
--- a/tests/xfs/140
+++ b/tests/xfs/140
@@ -23,6 +23,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
diff --git a/tests/xfs/142 b/tests/xfs/142
index 526167d..e09ae3f 100755
--- a/tests/xfs/142
+++ b/tests/xfs/142
@@ -23,6 +23,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
diff --git a/tests/xfs/143 b/tests/xfs/143
index 63281f9..686be64 100755
--- a/tests/xfs/143
+++ b/tests/xfs/143
@@ -23,6 +23,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
diff --git a/tests/xfs/144 b/tests/xfs/144
index 52123cc..cf5eca7 100755
--- a/tests/xfs/144
+++ b/tests/xfs/144
@@ -23,6 +23,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
diff --git a/tests/xfs/145 b/tests/xfs/145
index 54b8198..2a4b2f6 100755
--- a/tests/xfs/145
+++ b/tests/xfs/145
@@ -23,6 +23,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
diff --git a/tests/xfs/146 b/tests/xfs/146
index bb4975c..2091db1 100755
--- a/tests/xfs/146
+++ b/tests/xfs/146
@@ -23,6 +23,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
diff --git a/tests/xfs/147 b/tests/xfs/147
index e366dc7..c65dde9 100755
--- a/tests/xfs/147
+++ b/tests/xfs/147
@@ -23,6 +23,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
diff --git a/tests/xfs/148 b/tests/xfs/148
index 6db1c2b..42d2a10 100755
--- a/tests/xfs/148
+++ b/tests/xfs/148
@@ -24,6 +24,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
diff --git a/tests/xfs/149 b/tests/xfs/149
index c34a0ed..a3a43d1 100755
--- a/tests/xfs/149
+++ b/tests/xfs/149
@@ -24,13 +24,14 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
tmp=/tmp/$$
status=1 # failure is the default!
trap "rm -f $tmp.*; exit \$status" 0 1 2 3 15
-rm -f $seq.full
+rm -f $seqres.full
# get standard environment, filters and checks
. ./common.rc
@@ -44,15 +45,15 @@ export XFS_REPAIR_PROG=$XFS_PARALLEL_REPAIR_PROG
_check_repair()
{
- echo "Repairing, round 0" >> $seq.full
- _scratch_xfs_repair 2>&1 | _filter_repair | tee -a $seq.full >$tmp.0
+ echo "Repairing, round 0" >> $seqres.full
+ _scratch_xfs_repair 2>&1 | _filter_repair | tee -a $seqres.full >$tmp.0
for i in 1 2 3 4
do
- echo "Repairing, iteration $i" | tee -a $seq.full
+ echo "Repairing, iteration $i" | tee -a $seqres.full
_scratch_xfs_repair 2>&1 | _filter_repair >$tmp.$i
- diff $tmp.0 $tmp.$i >> $seq.full
+ diff $tmp.0 $tmp.$i >> $seqres.full
if [ $? -ne 0 ]; then
- echo "ERROR: repair round $i differs to round 0 (see $seq.full)" | tee -a $seq.full
+ echo "ERROR: repair round $i differs to round 0 (see $seqres.full)" | tee -a $seqres.full
break
fi
# echo all interesting stuff...
diff --git a/tests/xfs/150 b/tests/xfs/150
index b6a04c5..529b6b4 100755
--- a/tests/xfs/150
+++ b/tests/xfs/150
@@ -23,6 +23,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
diff --git a/tests/xfs/151 b/tests/xfs/151
index 4bfaff3..9de8ab4 100755
--- a/tests/xfs/151
+++ b/tests/xfs/151
@@ -25,6 +25,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
@@ -55,7 +56,7 @@ _check_sids()
| perl -ne "if (/^sids.*[\"|\s]($i)[\"|\s].*/) {print \$1} ;"`
if [ -z "$CHECKED_SID" ] ; then
echo "ERROR: SID(s) not created"
- ${DMAPI_QASUITE1_DIR}../simple/dm_getall_sessions >>$seq.full
+ ${DMAPI_QASUITE1_DIR}../simple/dm_getall_sessions >>$seqres.full
return
fi
done
diff --git a/tests/xfs/152 b/tests/xfs/152
index 2317291..4b9d471 100755
--- a/tests/xfs/152
+++ b/tests/xfs/152
@@ -23,6 +23,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
diff --git a/tests/xfs/153 b/tests/xfs/153
index 81be175..86df036 100755
--- a/tests/xfs/153
+++ b/tests/xfs/153
@@ -24,6 +24,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
diff --git a/tests/xfs/154 b/tests/xfs/154
index 62e79c2..528ec9c 100755
--- a/tests/xfs/154
+++ b/tests/xfs/154
@@ -23,6 +23,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
diff --git a/tests/xfs/155 b/tests/xfs/155
index 949bd98..1c4ea6c 100755
--- a/tests/xfs/155
+++ b/tests/xfs/155
@@ -23,6 +23,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
diff --git a/tests/xfs/156 b/tests/xfs/156
index 549cac8..0a73b6b 100755
--- a/tests/xfs/156
+++ b/tests/xfs/156
@@ -23,6 +23,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
@@ -48,8 +49,8 @@ _require_scratch
_scratch_mkfs_xfs >/dev/null 2>&1
_dmapi_scratch_mount
-${DMAPI_QASUITE1_DIR}cmd/get_dirattrs $SCRATCH_MNT > $seq.full
-[ $? -ne 0 ] && echo "get_dirattrs failed - see $seq.full"
+${DMAPI_QASUITE1_DIR}cmd/get_dirattrs $SCRATCH_MNT > $seqres.full
+[ $? -ne 0 ] && echo "get_dirattrs failed - see $seqres.full"
status=0
exit
diff --git a/tests/xfs/157 b/tests/xfs/157
index 9ae3c40..91819ef 100755
--- a/tests/xfs/157
+++ b/tests/xfs/157
@@ -23,6 +23,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
diff --git a/tests/xfs/158 b/tests/xfs/158
index e740654..ef8d4d1 100755
--- a/tests/xfs/158
+++ b/tests/xfs/158
@@ -23,6 +23,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
diff --git a/tests/xfs/159 b/tests/xfs/159
index bfc225d..8f80482 100755
--- a/tests/xfs/159
+++ b/tests/xfs/159
@@ -23,6 +23,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
diff --git a/tests/xfs/160 b/tests/xfs/160
index 3900299..2323697 100755
--- a/tests/xfs/160
+++ b/tests/xfs/160
@@ -23,6 +23,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
diff --git a/tests/xfs/161 b/tests/xfs/161
index c419380..45210c7 100755
--- a/tests/xfs/161
+++ b/tests/xfs/161
@@ -24,6 +24,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
diff --git a/tests/xfs/162 b/tests/xfs/162
index acd70e0..67aec9a 100755
--- a/tests/xfs/162
+++ b/tests/xfs/162
@@ -23,6 +23,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
diff --git a/tests/xfs/163 b/tests/xfs/163
index d4eef64..434f100 100755
--- a/tests/xfs/163
+++ b/tests/xfs/163
@@ -23,6 +23,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
diff --git a/tests/xfs/164 b/tests/xfs/164
index 1ef4aaf..8af0b0d 100755
--- a/tests/xfs/164
+++ b/tests/xfs/164
@@ -29,6 +29,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
@@ -44,7 +45,7 @@ _cleanup()
_filter_io()
{
- tee -a $seq.full | sed 's/ops;.*/ops/'
+ tee -a $seqres.full | sed 's/ops;.*/ops/'
}
#
@@ -55,7 +56,7 @@ _filter_bmap()
{
awk '$3 ~ /hole/ { print $1, $2, $3; next }
$7 ~ /10000/ { print $1, $2, "unwritten"; next }
- {print $1, $2}' >> $seq.full
+ {print $1, $2}' >> $seqres.full
}
diff --git a/tests/xfs/165 b/tests/xfs/165
index 3b321b9..72376f3 100755
--- a/tests/xfs/165
+++ b/tests/xfs/165
@@ -26,6 +26,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
@@ -41,7 +42,7 @@ _cleanup()
_filter_io()
{
- tee -a $seq.full | _filter_xfs_io
+ tee -a $seqres.full | _filter_xfs_io
}
#
@@ -52,7 +53,7 @@ _filter_io()
_filter_bmap()
{
awk '$3 ~ /hole/ { print $1, $2, $3; next }
- {print $1, $2}' >> $seq.full
+ {print $1, $2}' >> $seqres.full
}
# get standard environment, filters and checks
@@ -68,7 +69,7 @@ _supported_os IRIX Linux
# io tests
testfile=$TEST_DIR/file.$seq
rm -f $testfile
-rm -f $seq.full
+rm -f $seqres.full
len=4
end=`expr 10 \* $len`
diff --git a/tests/xfs/166 b/tests/xfs/166
index 527686f..3170fa6 100755
--- a/tests/xfs/166
+++ b/tests/xfs/166
@@ -23,13 +23,14 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
tmp=/tmp/$$
status=1 # failure is the default!
trap "_cleanup; exit \$status" 0 1 2 3 15
-rm -f $seq.full
+rm -f $seqres.full
_cleanup()
{
@@ -91,7 +92,7 @@ FILE_SIZE=1048576
rm -f $TEST_FILE
$TEST_PROG $FILE_SIZE $TEST_FILE
-xfs_bmap -vp $TEST_FILE >> $seq.full
+xfs_bmap -vp $TEST_FILE >> $seqres.full
xfs_bmap -vp $TEST_FILE | _filter_blocks
status=0
diff --git a/tests/xfs/167 b/tests/xfs/167
index b2895fd..6800d24 100755
--- a/tests/xfs/167
+++ b/tests/xfs/167
@@ -23,11 +23,12 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
tmp=/tmp/$$
-rm -f $seq.full
+rm -f $seqres.full
status=1 # failure is the default!
trap "_cleanup; exit \$status" 0 1 2 3 15
@@ -44,7 +45,7 @@ workout()
nops=15000
FSSTRESS_ARGS=`_scale_fsstress_args -d $SCRATCH_MNT -p $procs -n $nops \
$FSSTRESS_AVOID`
- $FSSTRESS_PROG $FSSTRESS_ARGS >> $seq.full &
+ $FSSTRESS_PROG $FSSTRESS_ARGS >> $seqres.full &
sleep 2
}
diff --git a/tests/xfs/168 b/tests/xfs/168
index 8980f9b..67f1e19 100755
--- a/tests/xfs/168
+++ b/tests/xfs/168
@@ -24,11 +24,12 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
tmp=/tmp/$$
-rm -f $seq.full
+rm -f $seqres.full
status=1 # failure is the default!
trap "_cleanup; exit \$status" 0 1 2 3 15
@@ -106,7 +107,7 @@ wait
# dmapi destroy events are asyncronous, don't rely on fixed ordering of events
# in print_event output, use sort.
echo "# here comes the dmapi print_event filtered and sorted output"
-cat $tmp.print_event_out | tee -a $here/$seq.full | _filter_dmapi_print_event | LC_COLLATE=POSIX sort
+cat $tmp.print_event_out | tee -a $here/$seqres.full | _filter_dmapi_print_event | LC_COLLATE=POSIX sort
rm $tmp.print_event_out
status=0
diff --git a/tests/xfs/170 b/tests/xfs/170
index b725d3a..f470946 100755
--- a/tests/xfs/170
+++ b/tests/xfs/170
@@ -25,11 +25,12 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
tmp=/tmp/$$
-rm -f $seq.full
+rm -f $seqres.full
status=1 # failure is the default!
trap "_cleanup; exit \$status" 0 1 2 3 15
diff --git a/tests/xfs/171 b/tests/xfs/171
index 4f77a41..af7a216 100755
--- a/tests/xfs/171
+++ b/tests/xfs/171
@@ -24,11 +24,12 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
tmp=/tmp/$$
-rm -f $seq.full
+rm -f $seqres.full
status=1 # failure is the default!
trap "_cleanup; exit \$status" 0 1 2 3 15
diff --git a/tests/xfs/172 b/tests/xfs/172
index b6b496c..50eda81 100755
--- a/tests/xfs/172
+++ b/tests/xfs/172
@@ -24,11 +24,12 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
tmp=/tmp/$$
-rm -f $seq.full
+rm -f $seqres.full
status=1 # failure is the default!
trap "_cleanup; exit \$status" 0 1 2 3 15
diff --git a/tests/xfs/173 b/tests/xfs/173
index 7146d2f..6761a8a 100755
--- a/tests/xfs/173
+++ b/tests/xfs/173
@@ -24,11 +24,12 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
tmp=/tmp/$$
-rm -f $seq.full
+rm -f $seqres.full
status=1 # failure is the default!
trap "_cleanup; exit \$status" 0 1 2 3 15
diff --git a/tests/xfs/174 b/tests/xfs/174
index 7745a6a..ffb6754 100755
--- a/tests/xfs/174
+++ b/tests/xfs/174
@@ -24,11 +24,12 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
tmp=/tmp/$$
-rm -f $seq.full
+rm -f $seqres.full
status=1 # failure is the default!
trap "_cleanup; exit \$status" 0 1 2 3 15
diff --git a/tests/xfs/175 b/tests/xfs/175
index 4fc3ffb..4753f21 100755
--- a/tests/xfs/175
+++ b/tests/xfs/175
@@ -26,11 +26,12 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
tmp=/tmp/$$
-rm -f $seq.full
+rm -f $seqres.full
status=1 # failure is the default!
trap "_cleanup; exit \$status" 0 1 2 3 15
diff --git a/tests/xfs/176 b/tests/xfs/176
index 93083c4..3fe9f04 100755
--- a/tests/xfs/176
+++ b/tests/xfs/176
@@ -23,11 +23,12 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
tmp=/tmp/$$
-rm -f $seq.full
+rm -f $seqres.full
status=1 # failure is the default!
trap "_cleanup; exit \$status" 0 1 2 3 15
diff --git a/tests/xfs/177 b/tests/xfs/177
index ec8aca7..49ca282 100755
--- a/tests/xfs/177
+++ b/tests/xfs/177
@@ -24,6 +24,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
diff --git a/tests/xfs/178 b/tests/xfs/178
index 8856656..084aeb9 100755
--- a/tests/xfs/178
+++ b/tests/xfs/178
@@ -24,6 +24,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
diff --git a/tests/xfs/179 b/tests/xfs/179
index f3facca..451d7cc 100755
--- a/tests/xfs/179
+++ b/tests/xfs/179
@@ -24,6 +24,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
diff --git a/tests/xfs/180 b/tests/xfs/180
index 0f82306..15e0221 100755
--- a/tests/xfs/180
+++ b/tests/xfs/180
@@ -24,6 +24,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
diff --git a/tests/xfs/181 b/tests/xfs/181
index fb65100..35e808f 100755
--- a/tests/xfs/181
+++ b/tests/xfs/181
@@ -27,6 +27,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
_cleanup()
@@ -50,17 +51,17 @@ trap "_cleanup; exit \$status" 0 1 2 3 15
_supported_fs xfs
_supported_os IRIX Linux
-rm -f $seq.full
+rm -f $seqres.full
rm -f $tmp.log
_require_scratch
echo "mkfs"
-_scratch_mkfs_xfs >>$seq.full 2>&1 \
+_scratch_mkfs_xfs >>$seqres.full 2>&1 \
|| _fail "mkfs scratch failed"
echo "mount"
-_scratch_mount >>$seq.full 2>&1 \
+_scratch_mount >>$seqres.full 2>&1 \
|| _fail "mount failed: $MOUNT_OPTIONS"
# num_files must be greater than 64 (XFS_AGI_UNLINKED_BUCKETS)
@@ -81,7 +82,7 @@ pid=$!
sleep 10
echo "godown"
-src/godown -v -f $SCRATCH_MNT >> $seq.full
+src/godown -v -f $SCRATCH_MNT >> $seqres.full
# kill the multi_open_unlink
kill $pid 2>/dev/null
@@ -95,11 +96,11 @@ echo "logprint after going down..."
_print_logstate
echo "mount with replay"
-_scratch_mount $mnt >>$seq.full 2>&1 \
+_scratch_mount $mnt >>$seqres.full 2>&1 \
|| _fail "mount failed: $mnt $MOUNT_OPTIONS"
echo "godown"
-src/godown -v -f $SCRATCH_MNT >> $seq.full
+src/godown -v -f $SCRATCH_MNT >> $seqres.full
echo "unmount"
umount $SCRATCH_MNT
@@ -108,7 +109,7 @@ echo "logprint after going down..."
_print_logstate
echo "logprint to check for CLEAR_AGI_BUCKET..."
-if _scratch_xfs_logprint -t | tee -a $seq.full | grep CLEAR; then
+if _scratch_xfs_logprint -t | tee -a $seqres.full | grep CLEAR; then
echo 'CLEAR_AGI_BUCKET transactions found!!'
echo 'Are you running with an old xfs kernel - where the bug still exists?'
else
@@ -116,7 +117,7 @@ else
fi
# clean up dirty log with log recovery on mount
-_scratch_mount >> $seq.full 2>&1 \
+_scratch_mount >> $seqres.full 2>&1 \
|| _fail "mount failed"
# should now be peaches
diff --git a/tests/xfs/182 b/tests/xfs/182
index 33e8010..7495eb1 100755
--- a/tests/xfs/182
+++ b/tests/xfs/182
@@ -24,6 +24,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
diff --git a/tests/xfs/183 b/tests/xfs/183
index 4624ab4..5a7587f 100755
--- a/tests/xfs/183
+++ b/tests/xfs/183
@@ -24,6 +24,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
diff --git a/tests/xfs/185 b/tests/xfs/185
index 928eb24..f00858b 100755
--- a/tests/xfs/185
+++ b/tests/xfs/185
@@ -23,6 +23,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
diff --git a/tests/xfs/186 b/tests/xfs/186
index 2c66026..46cd087 100755
--- a/tests/xfs/186
+++ b/tests/xfs/186
@@ -34,6 +34,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
@@ -77,7 +78,7 @@ _rmv_eas()
_filter_inode()
{
- tee -a $here/$seq.full | \
+ tee -a $here/$seqres.full | \
sed -e "s/core.forkoff/forkoff/g" | \
egrep '^u.sfdir2|^a.sfattr|forkoff' | \
egrep -v 'inumber|parent'
@@ -85,7 +86,7 @@ _filter_inode()
_filter_version()
{
- tee -a $here/$seq.full | tr ',' '\n' | grep ATTR
+ tee -a $here/$seqres.full | tr ',' '\n' | grep ATTR
}
_print_inode()
@@ -148,7 +149,7 @@ _supported_os Linux
_require_scratch
_require_attrs
-rm -f $seq.full
+rm -f $seqres.full
_scratch_mkfs -i attr=2,size=512 -l lazy-count=1 >/dev/null 2>&1
diff --git a/tests/xfs/187 b/tests/xfs/187
index bff0caa..c414017 100755
--- a/tests/xfs/187
+++ b/tests/xfs/187
@@ -28,6 +28,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
@@ -43,7 +44,7 @@ _cleanup()
_filter_version()
{
- tee -a $seq.full | tr ',' '\n' | egrep 'ATTR|MORE|LAZY'
+ tee -a $seqres.full | tr ',' '\n' | egrep 'ATTR|MORE|LAZY'
}
# get standard environment, filters and checks
@@ -58,7 +59,7 @@ _supported_os Linux
_require_scratch
_require_attrs
-rm -f $seq.full
+rm -f $seqres.full
# lazysb and attr2 are in features2 and will require morebitsbit on
# So test with lazysb and without it to see if the morebitsbit is
diff --git a/tests/xfs/188 b/tests/xfs/188
index 4ebbfc1..a8fe431 100755
--- a/tests/xfs/188
+++ b/tests/xfs/188
@@ -30,6 +30,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
@@ -57,7 +58,7 @@ if [ $XFSPROGS_VERSION -lt 21000 ]; then
fi
_require_scratch
-rm -f $seq.full
+rm -f $seqres.full
_scratch_mkfs -n version=ci >/dev/null 2>&1
_scratch_mount
diff --git a/tests/xfs/189 b/tests/xfs/189
index a5a5682..24cc29e 100755
--- a/tests/xfs/189
+++ b/tests/xfs/189
@@ -24,6 +24,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
@@ -220,5 +221,5 @@ _test_remount_barrier
# success, all done
echo "*** done"
-rm -f $seq.full
+rm -f $seqres.full
status=0
diff --git a/tests/xfs/190 b/tests/xfs/190
index 5bb4743..c760ee6 100755
--- a/tests/xfs/190
+++ b/tests/xfs/190
@@ -35,12 +35,13 @@ filesize=10
filename=test-190
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
tmp=/tmp/$$
status=0 # success is the default!
-rm -f $seq.full
+rm -f $seqres.full
# get standard environment, filters and checks
. ./common.rc
@@ -55,20 +56,20 @@ _scratch_mkfs_xfs >/dev/null 2>&1
_scratch_mount
fsblocksize=`xfs_info $SCRATCH_MNT|sed 's/=/ /g'|awk '/^data / { print $3 }'`
-dd if=/dev/zero of=$SCRATCH_MNT/$filename bs=1024k count=10 >> $seq.full 2>&1
+dd if=/dev/zero of=$SCRATCH_MNT/$filename bs=1024k count=10 >> $seqres.full 2>&1
# run DMAPI test using verbose output
echo Punching holes in file
-echo Punching holes in file >> $seq.full
+echo Punching holes in file >> $seqres.full
for i in $holes ; do
- echo xfs_io -c "unresvsp `echo $i |$SED_PROG 's/:/ /g'`" $SCRATCH_MNT/$filename >> $seq.full
+ echo xfs_io -c "unresvsp `echo $i |$SED_PROG 's/:/ /g'`" $SCRATCH_MNT/$filename >> $seqres.full
xfs_io -c "unresvsp `echo $i |$SED_PROG 's/:/ /g'`" $SCRATCH_MNT/$filename ;
done
echo Verifying holes are in the correct spots:
xfs_bmap=`xfs_bmap $SCRATCH_MNT/$filename`
-xfs_bmap $SCRATCH_MNT/$filename >> $seq.full
+xfs_bmap $SCRATCH_MNT/$filename >> $seqres.full
for i in $holes ; do
holeStart=$[`echo $i|$SED_PROG 's/:/ /g'|awk '{print $1}'`];
holeEnd=$[`echo $i|$SED_PROG 's/:/ /g'|awk '{print $2}'`];
@@ -83,7 +84,7 @@ for i in $holes ; do
#xfs_bmap prints holes in the following format
# 1: [8..15]: hole
bmap="\[$[$holeStart/512]..$[($holeEnd/512) -1]\]";
- echo $bmap >> $seq.full
+ echo $bmap >> $seqres.full
if [ $holeEnd == $holeStart ] ; then
continue #there is no hole
fi
diff --git a/tests/xfs/191 b/tests/xfs/191
index 3120dcb..d3b227c 100755
--- a/tests/xfs/191
+++ b/tests/xfs/191
@@ -23,6 +23,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
@@ -41,7 +42,7 @@ _supported_fs xfs
_supported_os Linux
_require_scratch
-_scratch_mkfs_xfs -i nfs4acl 1>$tmp.mkfs 2>$seq.full
+_scratch_mkfs_xfs -i nfs4acl 1>$tmp.mkfs 2>$seqres.full
if [ $? -ne 0 ]
then
_notrun "no mkfs support for NFS v4 ACLs"
@@ -53,7 +54,7 @@ then
_notrun "no kernel mount support for NFS v4 ACLs"
fi
-set_prog_path nfs4acl >>$seq.full
+set_prog_path nfs4acl >>$seqres.full
if [ $? -ne 0 ]
then
_notrun "no nfs4acl utility found"
diff --git a/tests/xfs/194 b/tests/xfs/194
index 595da25..4609a17 100755
--- a/tests/xfs/194
+++ b/tests/xfs/194
@@ -22,6 +22,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
@@ -44,7 +45,7 @@ _supported_fs xfs
_supported_os IRIX Linux
# real QA test starts here
-rm -f $seq.full
+rm -f $seqres.full
# For this test we use block size = 1/8 page size
pgsize=`$here/src/feature -s`
@@ -63,7 +64,7 @@ blksize=`expr $pgsize / 8`
_filter_bmap()
{
- tee -a $seq.full | \
+ tee -a $seqres.full | \
sed "s#$SCRATCH_MNT#SCRATCH_MNT#g" | \
awk \
'$3 ~ /hole/ { print $1 "\t" $3 "\t" ($4 * 512) / blksize; next }
@@ -75,7 +76,7 @@ _filter_bmap()
# Filter out offsets, which vary by blocksize
_filter_od()
{
- tee -a $seq.full | \
+ tee -a $seqres.full | \
sed -e "s/^[0-9A-Fa-f ]\{7,8\}//"
}
@@ -118,12 +119,12 @@ xfs_io \
-c "pwrite -S 0x11 -b `expr $pgsize / 2` 0 `expr $pgsize / 2`" \
-c "truncate `expr $blksize / 2`" \
-c "truncate $pgsize" \
--t -f $SCRATCH_MNT/testfile1 >> $seq.full
+-t -f $SCRATCH_MNT/testfile1 >> $seqres.full
# directio read of entire file
xfs_io \
-c "pread 0 $pgsize" \
--d $SCRATCH_MNT/testfile1 >> $seq.full
+-d $SCRATCH_MNT/testfile1 >> $seqres.full
xfs_bmap -v $SCRATCH_MNT/testfile1 | _filter_bmap
od -x $SCRATCH_MNT/testfile1 | _filter_od
@@ -137,12 +138,12 @@ xfs_io \
-c "truncate `expr $blksize / 2`" \
-c "truncate $pgsize" \
-c "pwrite -S 0x22 -b $blksize `expr $blksize \* 4` $blksize" \
--t -f $SCRATCH_MNT/testfile2 >> $seq.full
+-t -f $SCRATCH_MNT/testfile2 >> $seqres.full
# directio read of entire file
xfs_io \
-c "pread 0 $pgsize" \
--d $SCRATCH_MNT/testfile2 >> $seq.full
+-d $SCRATCH_MNT/testfile2 >> $seqres.full
xfs_bmap -v $SCRATCH_MNT/testfile2 | _filter_bmap
od -x $SCRATCH_MNT/testfile2 | _filter_od
@@ -187,7 +188,7 @@ xfs_io \
-c "truncate `expr $blksize / 2`" \
-c "truncate `expr $blksize + 1`" \
-c "pwrite -S 0x22 -b $blksize `expr $pgsize / 2` $blksize" \
--t -d -f $SCRATCH_MNT/testfile3 >> $seq.full
+-t -d -f $SCRATCH_MNT/testfile3 >> $seqres.full
xfs_bmap -v $SCRATCH_MNT/testfile3 | _filter_bmap
od -x $SCRATCH_MNT/testfile3 | _filter_od
@@ -207,7 +208,7 @@ xfs_io \
-c "truncate `expr $blksize + 1`" \
-c "pwrite -S 0x22 -b $blksize `expr $pgsize / 2` $blksize" \
-c "pwrite -S 0x33 -b 512 `expr $blksize \* 2` 512" \
--t -d -f $SCRATCH_MNT/testfile4 >> $seq.full
+-t -d -f $SCRATCH_MNT/testfile4 >> $seqres.full
xfs_bmap -v $SCRATCH_MNT/testfile4 | _filter_bmap
od -x $SCRATCH_MNT/testfile4 | _filter_od
diff --git a/tests/xfs/195 b/tests/xfs/195
index cd64db1..e0755f4 100755
--- a/tests/xfs/195
+++ b/tests/xfs/195
@@ -24,6 +24,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
@@ -82,5 +83,5 @@ _do_dump
# success, all done
echo "*** done"
-rm -f $seq.full
+rm -f $seqres.full
status=0
diff --git a/tests/xfs/196 b/tests/xfs/196
index 321fe47..20b20b2 100755
--- a/tests/xfs/196
+++ b/tests/xfs/196
@@ -25,6 +25,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
@@ -93,5 +94,5 @@ done
# success, all done
echo "*** done"
-rm -f $seq.full
+rm -f $seqres.full
status=0
diff --git a/tests/xfs/197 b/tests/xfs/197
index 8c2ebd2..b17ea37 100755
--- a/tests/xfs/197
+++ b/tests/xfs/197
@@ -28,6 +28,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
@@ -61,5 +62,5 @@ src/t_dir_offset $TEST_DIR/ttt
# success, all done
echo "*** done"
-rm -f $seq.full
+rm -f $seqres.full
status=0
diff --git a/tests/xfs/199 b/tests/xfs/199
index 127f307..fbca7c6 100755
--- a/tests/xfs/199
+++ b/tests/xfs/199
@@ -25,6 +25,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
@@ -86,5 +87,5 @@ xfs_db -x $SCRATCH_DEV -c 'sb' -c 'print features2'
# success, all done
echo "*** done"
-rm -f $seq.full
+rm -f $seqres.full
status=0
diff --git a/tests/xfs/200 b/tests/xfs/200
index 34139cc..a70fcfe 100755
--- a/tests/xfs/200
+++ b/tests/xfs/200
@@ -22,6 +22,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
@@ -121,5 +122,5 @@ _scratch_mount -o ro 2>&1 | _filter_scratch
# success, all done
echo "*** done"
-rm -f $seq.full
+rm -f $seqres.full
status=0
diff --git a/tests/xfs/201 b/tests/xfs/201
index e868d99..3f5b1fb 100755
--- a/tests/xfs/201
+++ b/tests/xfs/201
@@ -25,6 +25,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
@@ -94,5 +95,5 @@ sync
# success, all done
echo "*** done"
-rm -f $seq.full
+rm -f $seqres.full
status=0
diff --git a/tests/xfs/202 b/tests/xfs/202
index 27f9e67..b0591d3 100755
--- a/tests/xfs/202
+++ b/tests/xfs/202
@@ -22,6 +22,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
@@ -56,5 +57,5 @@ _scratch_xfs_repair -o force_geometry 2>&1 | _filter_repair
# success, all done
echo "*** done"
-rm -f $seq.full
+rm -f $seqres.full
status=0
diff --git a/tests/xfs/203 b/tests/xfs/203
index ed89600..98ee792 100755
--- a/tests/xfs/203
+++ b/tests/xfs/203
@@ -23,6 +23,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
@@ -61,7 +62,7 @@ _cleanup()
}
trap "_cleanup; exit \$status" 0 1 2 3 15
-rm -f $seq.full
+rm -f $seqres.full
# get standard environment, filters and checks
. ./common.rc
diff --git a/tests/xfs/205 b/tests/xfs/205
index 7c953db..8b973c2 100755
--- a/tests/xfs/205
+++ b/tests/xfs/205
@@ -22,6 +22,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
@@ -38,14 +39,14 @@ _supported_os Linux
_require_scratch
-rm -f $seq.full
+rm -f $seqres.full
-_scratch_mkfs_xfs -d size=16m -b size=512 >> $seq.full 2>&1
+_scratch_mkfs_xfs -d size=16m -b size=512 >> $seqres.full 2>&1
_scratch_mount
# fix the reserve block pool to a known size so that the enospc calculations
# work out correctly.
-_scratch_resvblks 1024 >> $seq.full 2>&1
+_scratch_resvblks 1024 >> $seqres.full 2>&1
# on a 16MB filesystem, there's 32768x512byte blocks. used is:
# - 4944 in the log,
diff --git a/tests/xfs/206 b/tests/xfs/206
index 1c25305..7f822cc 100755
--- a/tests/xfs/206
+++ b/tests/xfs/206
@@ -28,6 +28,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
@@ -58,7 +59,7 @@ if [ "$bitsperlong" -ne 64 ]; then
_notrun "This test is only valid on 64 bit machines"
fi
-rm -f $seq.full
+rm -f $seqres.full
tmpfile=$TEST_DIR/fsfile.$$
tmpdir=$TEST_DIR/tmpdir.$$
diff --git a/tests/xfs/216 b/tests/xfs/216
index a997d5a..486bd9d 100755
--- a/tests/xfs/216
+++ b/tests/xfs/216
@@ -22,6 +22,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
diff --git a/tests/xfs/217 b/tests/xfs/217
index b33c2e7..25d3a15 100755
--- a/tests/xfs/217
+++ b/tests/xfs/217
@@ -22,6 +22,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
diff --git a/tests/xfs/220 b/tests/xfs/220
index 061b395..a696aa0 100755
--- a/tests/xfs/220
+++ b/tests/xfs/220
@@ -26,6 +26,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
diff --git a/tests/xfs/222 b/tests/xfs/222
index 6b5cf1f..556baff 100755
--- a/tests/xfs/222
+++ b/tests/xfs/222
@@ -26,6 +26,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
@@ -49,7 +50,7 @@ _supported_os Linux
[ "$XFS_FSR_PROG" = "" ] && _notrun "xfs_fsr not found"
-xfs_fsr -d -v $TEST_DIR > $seq.full 2>&1
+xfs_fsr -d -v $TEST_DIR > $seqres.full 2>&1
echo "--- silence is golden ---"
status=0 ; exit
diff --git a/tests/xfs/227 b/tests/xfs/227
index 8403724..650c72e 100755
--- a/tests/xfs/227
+++ b/tests/xfs/227
@@ -28,6 +28,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
@@ -50,7 +51,7 @@ _supported_fs xfs
_supported_os Linux
_require_scratch
-rm -f $seq.full
+rm -f $seqres.full
[ "$XFS_FSR_PROG" = "" ] && _notrun "xfs_fsr not found"
@@ -152,10 +153,10 @@ create_target_attr_last()
create_attrs $nattrs $target
}
-rm -f $seq.full
+rm -f $seqres.full
# use a small filesystem so we can control freespace easily
-_scratch_mkfs_sized $((50 * 1024 * 1024)) >> $seq.full 2>&1
+_scratch_mkfs_sized $((50 * 1024 * 1024)) >> $seqres.full 2>&1
_scratch_mount
fragment_freespace
@@ -187,20 +188,20 @@ _scratch_mount
targ=$SCRATCH_MNT/fsr_test_file.$$
for n in `seq 4 1 12`; do
- echo "*** n == $n ***" >> $seq.full
+ echo "*** n == $n ***" >> $seqres.full
for i in `seq 5 1 15`; do
for j in `seq 5 1 20`; do
- create_target_attr_first $i $j $targ.$i.$j >> $seq.full 2>&1
+ create_target_attr_first $i $j $targ.$i.$j >> $seqres.full 2>&1
done
- xfs_bmap -vp $targ.$i.* >> $seq.full 2>&1
- FSRXFSTEST=true xfs_fsr -d -v -C $n $targ.$i.* >> $seq.full 2>&1
- xfs_bmap -vp $targ.$i.* >> $seq.full 2>&1
+ xfs_bmap -vp $targ.$i.* >> $seqres.full 2>&1
+ FSRXFSTEST=true xfs_fsr -d -v -C $n $targ.$i.* >> $seqres.full 2>&1
+ xfs_bmap -vp $targ.$i.* >> $seqres.full 2>&1
for j in `seq 5 1 20`; do
- create_target_attr_last $i $j $targ.$i.$j >> $seq.full 2>&1
+ create_target_attr_last $i $j $targ.$i.$j >> $seqres.full 2>&1
done
- xfs_bmap -vp $targ.$i.* >> $seq.full 2>&1
- FSRXFSTEST=true xfs_fsr -d -v -C $n $targ.$i.* >> $seq.full 2>&1
- xfs_bmap -vp $targ.$i.* >> $seq.full 2>&1
+ xfs_bmap -vp $targ.$i.* >> $seqres.full 2>&1
+ FSRXFSTEST=true xfs_fsr -d -v -C $n $targ.$i.* >> $seqres.full 2>&1
+ xfs_bmap -vp $targ.$i.* >> $seqres.full 2>&1
done
done
diff --git a/tests/xfs/229 b/tests/xfs/229
index 52be5c3..eef6a2d 100755
--- a/tests/xfs/229
+++ b/tests/xfs/229
@@ -29,6 +29,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
diff --git a/tests/xfs/238 b/tests/xfs/238
index e1a8749..00dd620 100755
--- a/tests/xfs/238
+++ b/tests/xfs/238
@@ -22,6 +22,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
diff --git a/tests/xfs/242 b/tests/xfs/242
index eb5f9df..6476d5a 100755
--- a/tests/xfs/242
+++ b/tests/xfs/242
@@ -23,6 +23,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
diff --git a/tests/xfs/244 b/tests/xfs/244
index c96d4eb..566caaa 100755
--- a/tests/xfs/244
+++ b/tests/xfs/244
@@ -23,6 +23,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
@@ -51,7 +52,7 @@ _require_projid32bit
export MOUNT_OPTIONS="-opquota"
# make fs with no projid32bit
-_scratch_mkfs_xfs -i projid32bit=0 >> $seq.full || _fail "mkfs failed"
+_scratch_mkfs_xfs -i projid32bit=0 >> $seqres.full || _fail "mkfs failed"
_qmount
# make sure project quota is supported
_require_prjquota ${SCRATCH_DEV}
@@ -68,7 +69,7 @@ mkdir $dir
touch $dir/below16bit
# below 16bit value
$XFS_QUOTA_PROG -x -c "project -s -p $dir/below16bit 3422" $SCRATCH_DEV \
- >> $seq.full
+ >> $seqres.full
projid=$($XFS_IO_PROG -r -c "lsproj" $dir/below16bit)
if [ "projid = 3422" != "$projid" ]; then
echo "FAIL: projid32bit disabled: returned projid value ($projid)"
@@ -79,7 +80,7 @@ fi
# 32bit value, should fail
touch $dir/over16bit
if $XFS_QUOTA_PROG -x -c "project -s -p $dir/over16bit 108545" $SCRATCH_DEV \
- >> $seq.full 2>&1; then
+ >> $seqres.full 2>&1; then
echo "FAIL: projid32bit disabled: setting 32bit projid succeeded"
echo " while it should fail"
status=1
@@ -87,7 +88,7 @@ fi
# over 32bit value, should fail
touch $dir/over32bit
-if $XFS_QUOTA_PROG -x -c "project -s -p $dir/over32bit 5344967296" $SCRATCH_DEV >> $seq.full 2>&1; then
+if $XFS_QUOTA_PROG -x -c "project -s -p $dir/over32bit 5344967296" $SCRATCH_DEV >> $seqres.full 2>&1; then
echo "FAIL: projid32bit disabled: setting over 32bit projid succeeded"
echo " while it should fail"
status=1
@@ -95,14 +96,14 @@ fi
# Do testing on filesystem with projid32bit feature enabled
umount $SCRATCH_DEV 2>/dev/null
-_scratch_mkfs_xfs -i projid32bit=1 >> $seq.full || _fail "mkfs failed"
+_scratch_mkfs_xfs -i projid32bit=1 >> $seqres.full || _fail "mkfs failed"
_qmount
mkdir $dir
touch $dir/below16bit
# below 16bit value, should succeed
$XFS_QUOTA_PROG -x -c "project -s -p $dir/below16bit 3422" $SCRATCH_DEV \
- >> $seq.full
+ >> $seqres.full
projid=$($XFS_IO_PROG -r -c "lsproj" $dir/below16bit)
if [ "projid = 3422" != "$projid" ]; then
echo "FAIL: projid32bit enabled: returned projid value ($projid)"
@@ -113,7 +114,7 @@ fi
# 32bit value, should succeed
touch $dir/over16bit
if $XFS_QUOTA_PROG -x -c "project -s -p $dir/over16bit 108545" $SCRATCH_DEV \
- >> $seq.full 2>&1; then
+ >> $seqres.full 2>&1; then
projid=$($XFS_IO_PROG -r -c "lsproj" $dir/over16bit)
if [ "projid = 108545" != "$projid" ]; then
echo "FAIL: projid32bit enabled: returned projid value ($projid)"
@@ -129,7 +130,7 @@ fi
# over 32bit value, should fail
touch $dir/over32bit
if $XFS_QUOTA_PROG -x -c "project -s -p $dir/over32bit 5344967296" $SCRATCH_DEV \
- >> $seq.full 2>&1; then
+ >> $seqres.full 2>&1; then
echo "FAIL: projid32bit enabled: setting over 32bit projid succeeded"
echo " while it should fail"
status=1
diff --git a/tests/xfs/250 b/tests/xfs/250
index 2dd12e8..a6edc2d 100755
--- a/tests/xfs/250
+++ b/tests/xfs/250
@@ -22,6 +22,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
diff --git a/tests/xfs/252 b/tests/xfs/252
index 9f0424d..be3bfcf 100755
--- a/tests/xfs/252
+++ b/tests/xfs/252
@@ -23,6 +23,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
diff --git a/tests/xfs/253 b/tests/xfs/253
index 64776da..7c221a5 100755
--- a/tests/xfs/253
+++ b/tests/xfs/253
@@ -33,6 +33,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
diff --git a/tests/xfs/259 b/tests/xfs/259
index 91503a0..6a29230 100755
--- a/tests/xfs/259
+++ b/tests/xfs/259
@@ -23,6 +23,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
status=1 # failure is the default!
diff --git a/tests/xfs/266 b/tests/xfs/266
index 89c590f..3efbb75 100755
--- a/tests/xfs/266
+++ b/tests/xfs/266
@@ -22,6 +22,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
diff --git a/tests/xfs/267 b/tests/xfs/267
index c52d810..05360a9 100755
--- a/tests/xfs/267
+++ b/tests/xfs/267
@@ -22,6 +22,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
diff --git a/tests/xfs/268 b/tests/xfs/268
index 36391a3..c0c45f2 100755
--- a/tests/xfs/268
+++ b/tests/xfs/268
@@ -24,6 +24,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
diff --git a/tests/xfs/278 b/tests/xfs/278
index 559e174..6439eb4 100755
--- a/tests/xfs/278
+++ b/tests/xfs/278
@@ -25,6 +25,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
@@ -60,22 +61,22 @@ _scratch_unmount
echo "Silence is goodness..."
# Corrupt DIR
-xfs_db -x -c "inode $DIR_INO" -c "write u.sfdir2.list[0].inumber.i4 0" $SCRATCH_DEV >> $seq.full
-xfs_db -x -c "inode $DIR_INO" -c "write u.sfdir2.list[0].name 0" $SCRATCH_DEV >> $seq.full
-xfs_db -x -c "inode $DIR_INO" -c "write u.sfdir2.list[0].offset 0" $SCRATCH_DEV >> $seq.full
-xfs_db -x -c "inode $DIR_INO" -c "write u.sfdir2.list[0].namelen 0" $SCRATCH_DEV >> $seq.full
-xfs_db -x -c "inode $DIR_INO" -c "write u.sfdir2.hdr.parent.i4 0" $SCRATCH_DEV >> $seq.full
-xfs_db -x -c "inode $DIR_INO" -c "write core.nlinkv2 0" $SCRATCH_DEV >> $seq.full
+xfs_db -x -c "inode $DIR_INO" -c "write u.sfdir2.list[0].inumber.i4 0" $SCRATCH_DEV >> $seqres.full
+xfs_db -x -c "inode $DIR_INO" -c "write u.sfdir2.list[0].name 0" $SCRATCH_DEV >> $seqres.full
+xfs_db -x -c "inode $DIR_INO" -c "write u.sfdir2.list[0].offset 0" $SCRATCH_DEV >> $seqres.full
+xfs_db -x -c "inode $DIR_INO" -c "write u.sfdir2.list[0].namelen 0" $SCRATCH_DEV >> $seqres.full
+xfs_db -x -c "inode $DIR_INO" -c "write u.sfdir2.hdr.parent.i4 0" $SCRATCH_DEV >> $seqres.full
+xfs_db -x -c "inode $DIR_INO" -c "write core.nlinkv2 0" $SCRATCH_DEV >> $seqres.full
# Corrupt SUBDIR
-xfs_db -x -c "inode $SUBDIR_INO" -c "write u.sfdir2.hdr.parent.i4 0" $SCRATCH_DEV >> $seq.full
-xfs_db -x -c "inode $SUBDIR_INO" -c "write core.nlinkv2 0" $SCRATCH_DEV >> $seq.full
+xfs_db -x -c "inode $SUBDIR_INO" -c "write u.sfdir2.hdr.parent.i4 0" $SCRATCH_DEV >> $seqres.full
+xfs_db -x -c "inode $SUBDIR_INO" -c "write core.nlinkv2 0" $SCRATCH_DEV >> $seqres.full
-echo "===== BEGIN of xfs_repair =====" >> $seq.full
-echo "" >>$seq.full
+echo "===== BEGIN of xfs_repair =====" >> $seqres.full
+echo "" >>$seqres.full
-xfs_repair $SCRATCH_DEV >> $seq.full 2>&1
-echo "===== END of xfs_repair =====" >> $seq.full
+xfs_repair $SCRATCH_DEV >> $seqres.full 2>&1
+echo "===== END of xfs_repair =====" >> $seqres.full
#if _check_scratch_fs; then
# status=0
diff --git a/tests/xfs/279 b/tests/xfs/279
index 8ee3328..e96c823 100755
--- a/tests/xfs/279
+++ b/tests/xfs/279
@@ -23,6 +23,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
@@ -48,7 +49,7 @@ _supported_os Linux
_require_scsi_debug
-rm -f $seq.full
+rm -f $seqres.full
# Remove xfs signature so -f isn't needed to re-mkfs
_wipe_device()
@@ -67,7 +68,7 @@ _check_mkfs()
return
fi
echo "Passed."
- cat $tmp.mkfs.full | _filter_mkfs >> $seq.full 2>$tmp.mkfs
+ cat $tmp.mkfs.full | _filter_mkfs >> $seqres.full 2>$tmp.mkfs
. $tmp.mkfs
echo "Got sector size: $sectsz"
device=`echo $@ | awk '{print $NF}'`
@@ -83,7 +84,7 @@ SCSI_DEBUG_DEV=`_get_scsi_debug_dev 4096 512 0 128`
_check_mkfs $SCSI_DEBUG_DEV
# blocksize smaller than physical sectorsize should revert to logical sectorsize
_check_mkfs -b size=2048 -f $SCSI_DEBUG_DEV
-) | tee -a $seq.full
+) | tee -a $seqres.full
_put_scsi_debug_dev
# === 4k physical 512b logical unaligned
@@ -99,7 +100,7 @@ _check_mkfs -f $SCSI_DEBUG_DEV
_check_mkfs -s size=4096 $SCSI_DEBUG_DEV
# with 4k sector specified should fall back to logical sector size with force
_check_mkfs -s size=4096 -f $SCSI_DEBUG_DEV
-) | tee -a $seq.full
+) | tee -a $seqres.full
_put_scsi_debug_dev
# === hard 4k physical / 4k logical
@@ -111,7 +112,7 @@ SCSI_DEBUG_DEV=`_get_scsi_debug_dev 4096 4096 0 128`
_check_mkfs -b size=2048 $SCSI_DEBUG_DEV
# sector size smaller than physical sector size should fail
_check_mkfs -s size=512 $SCSI_DEBUG_DEV
-) | tee -a $seq.full
+) | tee -a $seqres.full
_put_scsi_debug_dev
status=0
diff --git a/tests/xfs/281 b/tests/xfs/281
index 2af3533..7aae2a5 100755
--- a/tests/xfs/281
+++ b/tests/xfs/281
@@ -23,6 +23,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
diff --git a/tests/xfs/282 b/tests/xfs/282
index 4938408..0680b9c 100755
--- a/tests/xfs/282
+++ b/tests/xfs/282
@@ -25,6 +25,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
@@ -45,13 +46,13 @@ _require_legacy_v2_format
_create_dumpdir_fill
# ensure file/dir timestamps precede dump timestamp
sleep 2
-src/bstat $SCRATCH_MNT >>$here/$seq.full
+src/bstat $SCRATCH_MNT >>$here/$seqres.full
echo "*** Level 0 dump, format 2"
_do_dump_file -f $tmp.l0 -K
_append_dumpdir_fill
-src/bstat $SCRATCH_MNT >>$here/$seq.full
+src/bstat $SCRATCH_MNT >>$here/$seqres.full
echo "*** Level 1 dump, current format"
_do_dump_file -l 1 -f $tmp.l1
diff --git a/tests/xfs/283 b/tests/xfs/283
index d1ce8ad..75ee26e 100755
--- a/tests/xfs/283
+++ b/tests/xfs/283
@@ -25,6 +25,7 @@
#
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
@@ -45,13 +46,13 @@ _require_legacy_v2_format
_create_dumpdir_fill
# ensure file/dir timestamps precede dump timestamp
sleep 2
-src/bstat $SCRATCH_MNT >>$here/$seq.full
+src/bstat $SCRATCH_MNT >>$here/$seqres.full
echo "*** Level 0 dump, current format"
_do_dump_file -f $tmp.l0
_append_dumpdir_fill
-src/bstat $SCRATCH_MNT >>$here/$seq.full
+src/bstat $SCRATCH_MNT >>$here/$seqres.full
echo "*** Level 1 dump, format 2"
_do_dump_file -l 1 -f $tmp.l1 -K
diff --git a/tests/xfs/287 b/tests/xfs/287
index beb2234..29882f2 100644
--- a/tests/xfs/287
+++ b/tests/xfs/287
@@ -26,12 +26,13 @@
owner=ranto.boris@xxxxxxxxx
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
tmp=/tmp/$$
here=`pwd`
status=1 # failure is the default!
trap "_cleanup; exit \$status" 0 1 2 3 15
-rm -f $seq.full
+rm -f $seqres.full
# get standard environment, filters and checks
. ./common.rc
@@ -59,7 +60,7 @@ _require_scratch
_require_projid32bit
# create xfs fs without projid32bit ability, will be gained by xfs_admin
-_scratch_mkfs_xfs -i projid32bit=0 -d size=200m >> $seq.full \
+_scratch_mkfs_xfs -i projid32bit=0 -d size=200m >> $seqres.full \
|| _fail "mkfs failed"
_qmount_option "pquota"
_qmount
@@ -75,9 +76,9 @@ touch $dir/{16,32}bit
inode16a=$(ls -i $dir/16bit | cut -d ' ' -f 1)
inode32a=$(ls -i $dir/32bit | cut -d ' ' -f 1)
$XFS_QUOTA_PROG -x -c "project -s -p $dir/16bit 1234" $SCRATCH_DEV \
- >> $seq.full
+ >> $seqres.full
$XFS_QUOTA_PROG -x -c "project -s -p $dir/32bit 2123456789" $SCRATCH_DEV \
- >> $seq.full 2>&1
+ >> $seqres.full 2>&1
echo "No 32bit project quotas:"
$XFS_IO_PROG -r -c "lsproj" $dir/16bit
@@ -86,13 +87,13 @@ $XFS_IO_PROG -r -c "lsproj" $dir/32bit
umount $SCRATCH_MNT
# Now, enable projid32bit support by xfs_admin
-xfs_admin -p $SCRATCH_DEV >> $seq.full 2>&1 || _fail "xfs_admin failed"
+xfs_admin -p $SCRATCH_DEV >> $seqres.full 2>&1 || _fail "xfs_admin failed"
# Now mount the fs, 32bit project quotas shall be supported, now
_qmount_option "pquota"
_qmount
$XFS_QUOTA_PROG -x -c "project -s -p $dir/32bit 2123456789" $SCRATCH_DEV \
- >> $seq.full
+ >> $seqres.full
# These will be checked by $seq.out
echo "With 32bit project quota support:"
@@ -101,7 +102,7 @@ $XFS_IO_PROG -r -c "lsproj" $dir/32bit
# Dump the fs to a temporary file
rm -f $tmp.dump.img
-$XFSDUMP_PROG -f $tmp.dump -L label -M media -l 0 $SCRATCH_MNT >> $seq.full \
+$XFSDUMP_PROG -f $tmp.dump -L label -M media -l 0 $SCRATCH_MNT >> $seqres.full \
|| _fail "dump failed"
# Prepare the device to restore the dumped file system
@@ -111,7 +112,7 @@ restore_dir=$SCRATCH_MNT/restore/pquota
mkdir -p $SCRATCH_MNT/restore
# Restore
-$XFSRESTORE_PROG -f $tmp.dump $SCRATCH_MNT/restore >> $seq.full 2>&1 \
+$XFSRESTORE_PROG -f $tmp.dump $SCRATCH_MNT/restore >> $seqres.full 2>&1 \
|| _fail "xfsrestore failed"
# Check that they are the same
@@ -122,7 +123,7 @@ inode16b=$(ls -i $restore_dir/16bit | cut -d ' ' -f 1)
inode32b=$(ls -i $restore_dir/32bit | cut -d ' ' -f 1)
inode32v2=$(ls -i $restore_dir/32bitv2 | cut -d ' ' -f 1)
$XFS_QUOTA_PROG -x -c "project -s -p $restore_dir/32bitv2 2123456789" \
- $SCRATCH_MNT >> $seq.full
+ $SCRATCH_MNT >> $seqres.full
echo "The restored file system + one additional file:"
$XFS_IO_PROG -r -c "lsproj" $restore_dir/16bit
$XFS_IO_PROG -r -c "lsproj" $restore_dir/32bit
diff --git a/tests/xfs/290 b/tests/xfs/290
index cdbdc26..d8f3d07 100644
--- a/tests/xfs/290
+++ b/tests/xfs/290
@@ -29,6 +29,7 @@
owner=adahl@xxxxxxx
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
diff --git a/tests/xfs/291 b/tests/xfs/291
index 764f09b..6c90c07 100644
--- a/tests/xfs/291
+++ b/tests/xfs/291
@@ -24,6 +24,7 @@
owner=sandeen@xxxxxxxxxxx
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
@@ -45,9 +46,9 @@ _supported_fs xfs
_supported_os IRIX Linux
# real QA test starts here
-rm -f $seq.full
+rm -f $seqres.full
_require_scratch
-_scratch_mkfs_xfs -n size=16k -d size=128m >> $seq.full 2>&1
+_scratch_mkfs_xfs -n size=16k -d size=128m >> $seqres.full 2>&1
_scratch_mount
# First we cause very badly fragmented freespace, then
@@ -57,21 +58,21 @@ _scratch_mount
# Step 1: Cause badly fragmented free space
mkdir $SCRATCH_MNT/fragdir
for I in `seq 0 27200`; do
- (echo data > $SCRATCH_MNT/fragdir/f$I) >> $seq.full 2>&1
+ (echo data > $SCRATCH_MNT/fragdir/f$I) >> $seqres.full 2>&1
done
sync
for I in `seq 0 2 27200`; do
- rm -f $SCRATCH_MNT/fragdir/f$I >> $seq.full 2>&1
+ rm -f $SCRATCH_MNT/fragdir/f$I >> $seqres.full 2>&1
done
sync
# Soak up any remaining freespace
-xfs_io -f -c "pwrite 0 16m" -c "fsync" $SCRATCH_MNT/space_file.large >> $seq.full 2>&1
+xfs_io -f -c "pwrite 0 16m" -c "fsync" $SCRATCH_MNT/space_file.large >> $seqres.full 2>&1
# Take a look at freespace for any post-mortem on the test
_scratch_unmount
-xfs_db -c freesp $SCRATCH_DEV >> $seq.full 2>&1
+xfs_db -c freesp $SCRATCH_DEV >> $seqres.full 2>&1
_scratch_mount
# Step 2: Make a bunch of (hopefully fragmented) multiblock
@@ -113,14 +114,14 @@ done
_scratch_unmount
# Can xfs_repair and xfs_check cope with this monster?
-_scratch_xfs_repair >> $seq.full 2>&1 || _fail "xfs_repair failed"
-xfs_check $SCRATCH_DEV >> $seq.full 2>&1 || _fail "xfs_check failed"
+_scratch_xfs_repair >> $seqres.full 2>&1 || _fail "xfs_repair failed"
+xfs_check $SCRATCH_DEV >> $seqres.full 2>&1 || _fail "xfs_check failed"
# Yes they can! Now...
# Can xfs_metadump cope with this monster?
xfs_metadump $SCRATCH_DEV $tmp.metadump || _fail "xfs_metadump failed"
xfs_mdrestore $tmp.metadump $tmp.img || _fail "xfs_mdrestore failed"
-xfs_repair $tmp.img >> $seq.full 2>&1 || _fail "xfs_repair of metadump failed"
+xfs_repair $tmp.img >> $seqres.full 2>&1 || _fail "xfs_repair of metadump failed"
# Yes it can; success, all done
status=0
diff --git a/tests/xfs/292 b/tests/xfs/292
index 6843410..dbdc06e 100644
--- a/tests/xfs/292
+++ b/tests/xfs/292
@@ -25,6 +25,7 @@
owner=sandeen@xxxxxxxxxx
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
diff --git a/tests/xfs/293 b/tests/xfs/293
index 7e1aac2..e9e2a27 100644
--- a/tests/xfs/293
+++ b/tests/xfs/293
@@ -24,6 +24,7 @@
owner=sandeen@xxxxxxxxxx
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
diff --git a/tests/xfs/295 b/tests/xfs/295
index e906c7d..6ddf661 100644
--- a/tests/xfs/295
+++ b/tests/xfs/295
@@ -24,6 +24,7 @@
owner=sandeen@xxxxxxxxxxx
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
@@ -48,7 +49,7 @@ _supported_fs xfs
_supported_os IRIX Linux
_require_scratch
-rm -f $seq.full
+rm -f $seqres.full
_scratch_mkfs -l size=2560b >/dev/null 2>&1
@@ -58,7 +59,7 @@ _scratch_mkfs -l size=2560b >/dev/null 2>&1
_scratch_mount
echo hello > $SCRATCH_MNT/hello; setfattr -n user.name -v value $SCRATCH_MNT/hello
_scratch_unmount
-_scratch_xfs_logprint 2>&1 >> $seq.full
+_scratch_xfs_logprint 2>&1 >> $seqres.full
# Now go for a continued transaction
# The trick here is to get a transaction which is exactly the size of a
@@ -74,7 +75,7 @@ for I in `seq 0 8192`; do
touch $SCRATCH_MNT/tmp$I
done
_scratch_unmount
-_scratch_xfs_logprint 2>&1 >> $seq.full
+_scratch_xfs_logprint 2>&1 >> $seqres.full
# success, all done
status=0
diff --git a/tests/xfs/296 b/tests/xfs/296
index efcfb09..056d263 100644
--- a/tests/xfs/296
+++ b/tests/xfs/296
@@ -24,6 +24,7 @@
owner=sandeen@xxxxxxxxxxx
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
@@ -49,7 +50,7 @@ _supported_fs xfs
_supported_os Linux
_require_scratch
-rm -f $seq.full
+rm -f $seqres.full
_wipe_fs
diff --git a/tests/xfs/297 b/tests/xfs/297
index a7ea491..dacac5e 100644
--- a/tests/xfs/297
+++ b/tests/xfs/297
@@ -26,6 +26,7 @@
owner=eguan@xxxxxxxxxx
seq=`basename $0`
+seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
@@ -50,7 +51,7 @@ _supported_os IRIX Linux
_require_scratch
_require_freeze
-rm -f $seq.full
+rm -f $seqres.full
_scratch_mkfs_xfs -d agcount=16,su=256k,sw=12 -l su=256k,size=2560b >/dev/null 2>&1
_scratch_mount >/dev/null 2>&1
@@ -60,26 +61,26 @@ mkdir -p $STRESS_DIR
$FSSTRESS_PROG -d $STRESS_DIR -n 100 -p 1000 $FSSTRESS_AVOID >/dev/null 2>&1 &
# Freeze/unfreeze file system randomly
-echo "Start freeze/unfreeze randomly" | tee -a $seq.full
+echo "Start freeze/unfreeze randomly" | tee -a $seqres.full
LOOP=10
while [ $LOOP -gt 0 ];do
TIMEOUT=`expr $RANDOM % 5`
sleep $TIMEOUT
- echo "* Freeze file system after sleeping $TIMEOUT seconds" >>$seq.full
+ echo "* Freeze file system after sleeping $TIMEOUT seconds" >>$seqres.full
xfs_freeze -f $SCRATCH_MNT
if [ $? -ne 0 ];then
- echo " - Error: freeze filesystem failed" | tee -a $seq.full
+ echo " - Error: freeze filesystem failed" | tee -a $seqres.full
fi
TIMEOUT=`expr $RANDOM % 3`
sleep $TIMEOUT
- echo "* Unfreeze file system after sleeping $TIMEOUT seconds" >>$seq.full
+ echo "* Unfreeze file system after sleeping $TIMEOUT seconds" >>$seqres.full
xfs_freeze -u $SCRATCH_MNT
if [ $? -ne 0 ];then
- echo " - Error: unfreeze filesystem failed" | tee -a $seq.full
+ echo " - Error: unfreeze filesystem failed" | tee -a $seqres.full
fi
let LOOP=$LOOP-1
done
-echo "Test done" | tee -a $seq.full
+echo "Test done" | tee -a $seqres.full
killall -q $FSSTRESS_PROG
wait
--
1.5.3.8
_______________________________________________
xfs mailing list
xfs@xxxxxxxxxxx
http://oss.sgi.com/mailman/listinfo/xfs
