On Thu, Nov 15, 2012 at 11:55:47AM -0600, Mark Tinguely wrote: > On 11/14/12 00:50, Dave Chinner wrote: > >xfs: verify dquot blocks as they are read from disk > > > >From: Dave Chinner<dchinner@xxxxxxxxxx> > > > >Add a dquot buffer verify callback function and pass it into the > >buffer read functions. This checks all the dquots in a buffer, but > >cannot completely verify the dquot ids are correct. Also, errors > >cannot be repaired, so an additional function is added to repair bad > >dquots in the buffer if such an error is detected in a context where > >repair is allowed. > > > >Signed-off-by: Dave Chinner<dchinner@xxxxxxxxxx> > >Reviewed-by: Phil White<pwhite@xxxxxxx> > >--- > >V2: quotacheck wasn't verifying dquots as they were read from disk > > > > FYI: > > The xfs_quota program does not generate output with V2 which causes > xfstest 050 to fails. I don't think that has anything to do with this patch orthechange for V2 - V2 only changes quotacheck behaviour, and that doesn't impact xfs_quota behaviour. The test passes just fine here: $ sudo ./check 050 FSTYP -- xfs (debug) PLATFORM -- Linux/x86_64 test-2 3.7.0-rc5-dgc+ MKFS_OPTIONS -- -f -bsize=4096 /dev/vdb MOUNT_OPTIONS -- /dev/vdb /mnt/scratch 050 14s ... 15s Ran: 050 Passed all 1 tests So perhaps there's something else going wrong on your machine? Cheers, Dave. -- Dave Chinner david@xxxxxxxxxxxxx _______________________________________________ xfs mailing list xfs@xxxxxxxxxxx http://oss.sgi.com/mailman/listinfo/xfs