Local version of fstrim was dropped so that we depend on upstream
version which is now available via FSTRIM_PROG. _require_fstrim was
added to check if fstrim is available in the system and
_test_batched_discard to check if we can run fstrim on certain
mountpoint.
Also tests 251 and 260 were modified to reflect this change.
Signed-off-by: Tomas Racek <tracek@xxxxxxxxxx>
---
.gitignore | 1 -
251 | 14 ++--
260 | 36 ++++----
260.out | 8 +-
common.config | 1 +
common.rc | 17 ++++
src/Makefile | 2 +-
src/fstrim.c | 257 ----------------------------------------------------------
8 files changed, 49 insertions(+), 287 deletions(-)
delete mode 100644 src/fstrim.c
diff --git a/.gitignore b/.gitignore
index 900ff95..c0e0e4c 100644
--- a/.gitignore
+++ b/.gitignore
@@ -37,7 +37,6 @@ src/fill
src/fill2
src/fs_perms
src/fstest
-src/fstrim
src/ftrunc
src/genhashnames
src/getdevicesize
diff --git a/251 b/251
index f46b6e2..dbb6ba7 100755
--- a/251
+++ b/251
@@ -44,6 +44,7 @@ mypid=$$
_supported_fs generic
_supported_os Linux
_require_scratch
+_require_fstrim
_scratch_mkfs >/dev/null 2>&1
_scratch_mount
@@ -71,16 +72,11 @@ _fail()
kill $mypid 2> /dev/null
}
-_check_fstrim_support()
-{
- $here/src/fstrim -l 10M $SCRATCH_MNT &> /dev/null
-}
-
_guess_max_minlen()
{
mmlen=100000
while [ $mmlen -gt 1 ]; do
- $here/src/fstrim -l $(($mmlen*2))k -m ${mmlen}k $SCRATCH_MNT &> /dev/null && break
+ $FSTRIM_PROG -l $(($mmlen*2))k -m ${mmlen}k $SCRATCH_MNT &> /dev/null && break
mmlen=$(($mmlen/2))
done
echo $mmlen
@@ -102,12 +98,12 @@ fstrim_loop()
minlen=$(((RANDOM*($RANDOM%2+1))%$mmlen))
start=$RANDOM
if [ $((RANDOM%10)) -gt 7 ]; then
- $here/src/fstrim $SCRATCH_MNT &
+ $FSTRIM_PROG $SCRATCH_MNT &
fpid=$!
wait $fpid
fi
while [ $start -lt $fsize ] ; do
- $here/src/fstrim -m ${minlen}k -s ${start}k -l ${step}k $SCRATCH_MNT &
+ $FSTRIM_PROG -m ${minlen}k -o ${start}k -l ${step}k $SCRATCH_MNT &
fpid=$!
wait $fpid
start=$(( $start + $step ))
@@ -157,7 +153,7 @@ content=$here
# Check for FITRIM support
echo -n "Checking FITRIM support: "
-_check_fstrim_support || _notrun "FSTRIM is not supported"
+_test_batched_discard $SCRATCH_MNT || _notrun "FITRIM not supported on $SCRATCH_DEV"
echo "done."
mkdir -p $tmp
diff --git a/260 b/260
index b005cd3..ae4740a 100755
--- a/260
+++ b/260
@@ -41,13 +41,13 @@ mypid=$$
_supported_fs generic
_supported_os Linux
_require_math
+_require_fstrim
_require_scratch
_scratch_mkfs >/dev/null 2>&1
_scratch_mount
-FSTRIM="$here/src/fstrim"
-"$FSTRIM" -l 10M $SCRATCH_MNT &> /dev/null || _notrun "FSTRIM is not supported"
+_test_batched_discard $SCRATCH_MNT || _notrun "FITRIM not supported on $SCRATCH_DEV"
fssize=$(df -k | grep "$SCRATCH_MNT" | grep "$SCRATCH_DEV" | awk '{print $2}')
@@ -59,20 +59,24 @@ max_64bit=$(_math "2^64 - 1")
# the file system
echo "[+] Start beyond the end of fs (should fail)"
-"$FSTRIM" -s $beyond_eofs $SCRATCH_MNT
+out=$($FSTRIM_PROG -o $beyond_eofs $SCRATCH_MNT 2>&1)
[ $? -eq 0 ] && status=1
+echo $out | _filter_scratch
echo "[+] Start beyond the end of fs with len set (should fail)"
-"$FSTRIM" -s $beyond_eofs -l1M $SCRATCH_MNT
+out=$($FSTRIM_PROG -o $beyond_eofs -l1M $SCRATCH_MNT 2>&1)
[ $? -eq 0 ] && status=1
+echo $out | _filter_scratch
echo "[+] Start = 2^64-1 (should fail)"
-"$FSTRIM" -s $max_64bit $SCRATCH_MNT
+out=$($FSTRIM_PROG -o $max_64bit $SCRATCH_MNT 2>&1)
[ $? -eq 0 ] && status=1
+echo $out | _filter_scratch
echo "[+] Start = 2^64-1 and len is set (should fail)"
-"$FSTRIM" -s $max_64bit -l1M $SCRATCH_MNT
+out=$($FSTRIM_PROG -o $max_64bit -l1M $SCRATCH_MNT 2>&1)
[ $? -eq 0 ] && status=1
+echo $out | _filter_scratch
_scratch_unmount
_scratch_mkfs >/dev/null 2>&1
@@ -82,16 +86,16 @@ _scratch_mount
# since the length should be truncated
echo "[+] Default length (should succeed)"
-"$FSTRIM" $SCRATCH_MNT
+$FSTRIM_PROG $SCRATCH_MNT
[ $? -ne 0 ] && status=1
echo "[+] Default length with start set (should succeed)"
-"$FSTRIM" -s10M $SCRATCH_MNT
+$FSTRIM_PROG -o10M $SCRATCH_MNT
[ $? -ne 0 ] && status=1
echo "[+] Length beyond the end of fs (should succeed)"
-"$FSTRIM" -l $beyond_eofs $SCRATCH_MNT
+$FSTRIM_PROG -l $beyond_eofs $SCRATCH_MNT
[ $? -ne 0 ] && status=1
echo "[+] Length beyond the end of fs with start set (should succeed)"
-"$FSTRIM" -s10M -l $beyond_eofs $SCRATCH_MNT
+$FSTRIM_PROG -o10M -l $beyond_eofs $SCRATCH_MNT
[ $? -ne 0 ] && status=1
_scratch_unmount
@@ -101,8 +105,9 @@ _scratch_mount
# This is a bit fuzzy, but since the file system is fresh
# there should be at least (fssize/2) free space to trim.
# This is supposed to catch wrong FITRIM argument handling
-out=$("$FSTRIM" -v -s10M $SCRATCH_MNT)
-bytes=${out%% *}
+out=$($FSTRIM_PROG -v -o10M $SCRATCH_MNT)
+nopref=${out##*: }
+bytes=${nopref%% *}
if [ $bytes -gt $(_math "$fssize*1024") ]; then
status=1
@@ -155,7 +160,7 @@ _scratch_unmount
_scratch_mkfs >/dev/null 2>&1
_scratch_mount
# It should fail since $start is beyond the end of file system
-"$FSTRIM" -s$start -l10M $SCRATCH_MNT &> /dev/null
+$FSTRIM_PROG -o$start -l10M $SCRATCH_MNT &> /dev/null
if [ $? -eq 0 ]; then
status=1
echo "It seems that fs logic handling start"\
@@ -173,8 +178,9 @@ _scratch_mount
# It is because btrfs does not have not-yet-used parts of the device
# mapped and since we got here right after the mkfs, there is not
# enough free extents in the root tree.
-out=$("$FSTRIM" -v -l$len $SCRATCH_MNT)
-bytes=${out%% *}
+out=$($FSTRIM_PROG -v -l$len $SCRATCH_MNT)
+nopref=${out##*: }
+bytes=${nopref%% *}
if [ $bytes -le $(_math "$fssize*512") ] && [ $FSTYP != "btrfs" ]; then
status=1
echo "It seems that fs logic handling len argument overflows"
diff --git a/260.out b/260.out
index 199320a..a16c4f7 100644
--- a/260.out
+++ b/260.out
@@ -1,12 +1,12 @@
QA output created by 260
[+] Start beyond the end of fs (should fail)
-fstrim: FSTRIM: Invalid argument
+fstrim: SCRATCH_MNT: FITRIM ioctl failed: Invalid argument
[+] Start beyond the end of fs with len set (should fail)
-fstrim: FSTRIM: Invalid argument
+fstrim: SCRATCH_MNT: FITRIM ioctl failed: Invalid argument
[+] Start = 2^64-1 (should fail)
-fstrim: FSTRIM: Invalid argument
+fstrim: SCRATCH_MNT: FITRIM ioctl failed: Invalid argument
[+] Start = 2^64-1 and len is set (should fail)
-fstrim: FSTRIM: Invalid argument
+fstrim: SCRATCH_MNT: FITRIM ioctl failed: Invalid argument
[+] Default length (should succeed)
[+] Default length with start set (should succeed)
[+] Length beyond the end of fs (should succeed)
diff --git a/common.config b/common.config
index 7bed1c5..57f505d 100644
--- a/common.config
+++ b/common.config
@@ -158,6 +158,7 @@ export XFS_QUOTA_PROG="`set_prog_path xfs_quota`"
export KILLALL_PROG="`set_prog_path killall`"
export INDENT_PROG="`set_prog_path indent`"
export XFS_COPY_PROG="`set_prog_path xfs_copy`"
+export FSTRIM_PROG="`set_prog_path fstrim`"
# Generate a comparable xfsprogs version number in the form of
# major * 10000 + minor * 100 + release
diff --git a/common.rc b/common.rc
index e7037c1..966fc93 100644
--- a/common.rc
+++ b/common.rc
@@ -1787,6 +1787,23 @@ _devmgt_add()
echo ${tdl} > /sys/class/scsi_host/host${h}/scan || _fail "Add disk failed"
}
+_require_fstrim()
+{
+ if [ -z "$FSTRIM_PROG" ]; then
+ _notrun "This test requires fstrim utility."
+ fi
+}
+
+_test_batched_discard()
+{
+ if [ $# -ne 1 ]; then
+ echo "Usage: _test_batched_discard mnt_point" 1>&2
+ exit 1
+ fi
+ _require_fstrim
+ $FSTRIM_PROG ${1} &>/dev/null
+}
+
################################################################################
if [ "$iam" != new -a "$iam" != bench ]
diff --git a/src/Makefile b/src/Makefile
index c773b5c..f7362a2 100644
--- a/src/Makefile
+++ b/src/Makefile
@@ -17,7 +17,7 @@ LINUX_TARGETS = xfsctl bstat t_mtab getdevicesize preallo_rw_pattern_reader \
preallo_rw_pattern_writer ftrunc trunc fs_perms testx looptest \
locktest unwritten_mmap bulkstat_unlink_test t_stripealign \
bulkstat_unlink_test_modified t_dir_offset t_futimens t_immutable \
- stale_handle pwrite_mmap_blocked fstrim t_dir_offset2 seek_sanity_test \
+ stale_handle pwrite_mmap_blocked t_dir_offset2 seek_sanity_test \
seek_copy_test
SUBDIRS =
diff --git a/src/fstrim.c b/src/fstrim.c
deleted file mode 100644
index e23bcb3..0000000
--- a/src/fstrim.c
+++ /dev/null
@@ -1,257 +0,0 @@
-/*
- * fstrim.c -- discard the part (or whole) of mounted filesystem.
- *
- * Copyright (C) 2010 Red Hat, Inc., Lukas Czerner <lczerner@xxxxxxxxxx>
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- *
- * This program uses FITRIM ioctl to discard parts or the whole filesystem
- * online (mounted). You can specify range (start and lenght) to be
- * discarded, or simply discard while filesystem.
- *
- * Usage: fstrim [options] <mount point>
- */
-
-#include <string.h>
-#include <unistd.h>
-#include <stdlib.h>
-#include <errno.h>
-#include <stdio.h>
-#include <stdint.h>
-#include <fcntl.h>
-#include <limits.h>
-#include <stdarg.h>
-#include <getopt.h>
-
-#include <sys/ioctl.h>
-#include <sys/stat.h>
-#include <linux/fs.h>
-
-#ifndef FITRIM
-struct fstrim_range {
- uint64_t start;
- uint64_t len;
- uint64_t minlen;
-};
-#define FITRIM _IOWR('X', 121, struct fstrim_range)
-#endif
-
-const char *program_name = "fstrim";
-
-struct options {
- struct fstrim_range *range;
- char mpoint[PATH_MAX];
- char verbose;
-};
-
-static void usage(void)
-{
- fprintf(stderr,
- "Usage: %s [-s start] [-l length] [-m minimum-extent]"
- " [-v] {mountpoint}\n\t"
- "-s Starting Byte to discard from\n\t"
- "-l Number of Bytes to discard from the start\n\t"
- "-m Minimum extent length to discard\n\t"
- "-v Verbose - number of discarded bytes\n",
- program_name);
-}
-
-static void err_exit(const char *fmt, ...)
-{
- va_list pvar;
- va_start(pvar, fmt);
- vfprintf(stderr, fmt, pvar);
- va_end(pvar);
- usage();
- exit(EXIT_FAILURE);
-}
-
-/**
- * Get the number from argument. It can be number followed by
- * units: k|K, m|M, g|G, t|T
- */
-static unsigned long long get_number(char **optarg)
-{
- char *opt, *end;
- unsigned long long number, max;
-
- /* get the max to avoid overflow */
- max = ULLONG_MAX / 1024;
- number = 0;
- opt = *optarg;
-
- if (*opt == '-') {
- err_exit("%s: %s (%s)\n", program_name,
- strerror(ERANGE), *optarg);
- }
-
- errno = 0;
- number = strtoull(opt, &end , 0);
- if (errno)
- err_exit("%s: %s (%s)\n", program_name,
- strerror(errno), *optarg);
-
- /*
- * Convert units to numbers. Fall-through stack is used for units
- * so absence of breaks is intentional.
- */
- switch (*end) {
- case 'T': /* terabytes */
- case 't':
- if (number > max)
- err_exit("%s: %s (%s)\n", program_name,
- strerror(ERANGE), *optarg);
- number *= 1024;
- case 'G': /* gigabytes */
- case 'g':
- if (number > max)
- err_exit("%s: %s (%s)\n", program_name,
- strerror(ERANGE), *optarg);
- number *= 1024;
- case 'M': /* megabytes */
- case 'm':
- if (number > max)
- err_exit("%s: %s (%s)\n", program_name,
- strerror(ERANGE), *optarg);
- number *= 1024;
- case 'K': /* kilobytes */
- case 'k':
- if (number > max)
- err_exit("%s: %s (%s)\n", program_name,
- strerror(ERANGE), *optarg);
- number *= 1024;
- end++;
- case '\0': /* end of the string */
- break;
- default:
- err_exit("%s: %s (%s)\n", program_name,
- strerror(EINVAL), *optarg);
- return 0;
- }
-
- if (*end != '\0') {
- err_exit("%s: %s (%s)\n", program_name,
- strerror(EINVAL), *optarg);
- }
-
- return number;
-}
-
-static int parse_opts(int argc, char **argv, struct options *opts)
-{
- int c;
-
- while ((c = getopt(argc, argv, "s:l:m:v")) != EOF) {
- switch (c) {
- case 's': /* starting point */
- opts->range->start = get_number(&optarg);
- break;
- case 'l': /* length */
- opts->range->len = get_number(&optarg);
- break;
- case 'm': /* minlen */
- opts->range->minlen = get_number(&optarg);
- break;
- case 'v': /* verbose */
- opts->verbose = 1;
- break;
- default:
- return EXIT_FAILURE;
- }
- }
-
- return 0;
-}
-
-int main(int argc, char **argv)
-{
- struct options *opts;
- struct stat sb;
- int fd, err = 0, ret = EXIT_FAILURE;
-
- opts = malloc(sizeof(struct options));
- if (!opts)
- err_exit("%s: malloc(): %s\n", program_name, strerror(errno));
-
- opts->range = NULL;
- opts->verbose = 0;
-
- if (argc > 1)
- strncpy(opts->mpoint, argv[argc - 1], sizeof(opts->mpoint));
-
- opts->range = calloc(1, sizeof(struct fstrim_range));
- if (!opts->range) {
- fprintf(stderr, "%s: calloc(): %s\n", program_name,
- strerror(errno));
- goto free_opts;
- }
-
- opts->range->len = ULLONG_MAX;
-
- if (argc > 2)
- err = parse_opts(argc, argv, opts);
-
- if (err) {
- usage();
- goto free_opts;
- }
-
- if (strnlen(opts->mpoint, 1) < 1) {
- fprintf(stderr, "%s: You have to specify mount point.\n",
- program_name);
- usage();
- goto free_opts;
- }
-
- if (stat(opts->mpoint, &sb) == -1) {
- fprintf(stderr, "%s: %s: %s\n", program_name,
- opts->mpoint, strerror(errno));
- usage();
- goto free_opts;
- }
-
- if (!S_ISDIR(sb.st_mode)) {
- fprintf(stderr, "%s: %s: (%s)\n", program_name,
- opts->mpoint, strerror(ENOTDIR));
- usage();
- goto free_opts;
- }
-
- fd = open(opts->mpoint, O_RDONLY);
- if (fd < 0) {
- fprintf(stderr, "%s: open(%s): %s\n", program_name,
- opts->mpoint, strerror(errno));
- goto free_opts;
- }
-
- if (ioctl(fd, FITRIM, opts->range)) {
- fprintf(stderr, "%s: FSTRIM: %s\n", program_name,
- strerror(errno));
- goto free_opts;
- }
-
- if ((opts->verbose) && (opts->range))
- fprintf(stdout, "%llu Bytes were trimmed\n", (unsigned long long)opts->range->len);
-
- ret = EXIT_SUCCESS;
-
-free_opts:
- if (opts) {
- if (opts->range)
- free(opts->range);
- free(opts);
- }
-
- return ret;
-}
--
1.7.11.4
_______________________________________________
xfs mailing list
xfs@xxxxxxxxxxx
http://oss.sgi.com/mailman/listinfo/xfs
