The test covers several areas including enabling projid32bit
functionality dynamically by xfs_admin, dumping, restoring, quota
reporting and xfs_db projid values reporting.
This test case hits a bug with xfsdump/xfsrestore process on a
projid32bit enabled filesystem.
Signed-off-by: Boris Ranto <ranto.boris@xxxxxxxxx>
---
285 | 144 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
285.out | 23 ++++++++++
group | 1 +
3 files changed, 168 insertions(+), 0 deletions(-)
create mode 100644 285
create mode 100644 285.out
diff --git a/285 b/285
new file mode 100644
index 0000000..a1e497d
--- /dev/null
+++ b/285
@@ -0,0 +1,144 @@
+#! /bin/bash
+# FS QA Test No. 285
+#
+# Test to verify project quota xfs_admin, xfsdump/xfsrestore and
+# xfs_db functionality
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2012 Red Hat, Inc. All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#
+#-----------------------------------------------------------------------
+#
+# creator
+owner=ranto.boris@xxxxxxxxx
+
+seq=`basename $0`
+echo "QA output created by $seq"
+tmp=/tmp/$$
+here=`pwd`
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+rm -f $seq.full
+
+# get standard environment, filters and checks
+. ./common.rc
+. ./common.quota
+
+_cleanup()
+{
+ cd /
+ umount $SCRATCH_MNT 2>/dev/null
+ rm -rf $tmp.*
+}
+
+_print_projid()
+{
+ $XFS_DB_PROG -c "inode $1" \
+ -c "print core.projid_lo" \
+ -c "print core.projid_hi" \
+ $SCRATCH_DEV
+}
+
+# real QA test starts here
+_supported_fs xfs
+_require_xfs_quota
+_require_scratch
+_require_projid32bit
+
+# create xfs fs without projid32bit ability, will be gained by xfs_admin
+_scratch_mkfs_xfs -i projid32bit=0 -d size=200m >> $seq.full \
+ || _fail "mkfs failed"
+_qmount_option "pquota"
+_qmount
+# require project quotas
+_require_prjquota $SCRATCH_DEV
+
+dir=$SCRATCH_MNT/pquota
+
+status=1
+
+mkdir -p $dir
+touch $dir/{16,32}less
+inode16a=$(ls -i $dir/16less|cut -d ' ' -f 1)
+inode32a=$(ls -i $dir/32less|cut -d ' ' -f 1)
+$XFS_QUOTA_PROG -x -c "project -s -p $dir/16less 1234" $SCRATCH_DEV \
+ >> $seq.full
+$XFS_QUOTA_PROG -x -c "project -s -p $dir/32less 2123456789" $SCRATCH_DEV \
+ >> $seq.full 2>&1
+
+echo "No 32bit project quotas:"
+$XFS_IO_PROG -r -c "lsproj" $dir/16less
+$XFS_IO_PROG -r -c "lsproj" $dir/32less
+
+umount $SCRATCH_MNT
+
+# Now, enable projid32bit support by xfs_admin
+xfs_admin -p $SCRATCH_DEV >> $seq.full 2>&1 || _fail "xfs_admin failed"
+
+# Now mount the fs, 32bit project quotas shall be supported, now
+_qmount_option "pquota"
+_qmount
+$XFS_QUOTA_PROG -x -c "project -s -p $dir/32less 2123456789" $SCRATCH_DEV \
+ >> $seq.full
+
+# These will be checked by $seq.out
+echo "With 32bit project quota support:"
+$XFS_IO_PROG -r -c "lsproj" $dir/16less
+$XFS_IO_PROG -r -c "lsproj" $dir/32less
+
+# Dump the fs to a temporary file
+rm -f $tmp.dump.img
+$XFSDUMP_PROG -f $tmp.dump -L label -M media -l 0 $SCRATCH_MNT >> $seq.full \
+ || _fail "dump failed"
+
+# Prepare the device to restore the dumped file system
+restore_dir=$SCRATCH_MNT/restore/pquota
+
+# Just make the restore dir, the pquota dir will be created by xfsrestore
+mkdir -p $SCRATCH_MNT/restore
+
+# Restore
+$XFSRESTORE_PROG -f $tmp.dump $SCRATCH_MNT/restore >> $seq.full 2>&1 \
+ || _fail "xfsrestore failed"
+
+# Check that they are the same
+diff -urpN $SCRATCH_MNT/{,restore}/pquota || _fail "diff failed"
+
+touch $restore_dir/32lessv2
+inode16b=$(ls -i $restore_dir/16less|cut -d ' ' -f 1)
+inode32b=$(ls -i $restore_dir/32less|cut -d ' ' -f 1)
+inode32v2=$(ls -i $restore_dir/32lessv2|cut -d ' ' -f 1)
+$XFS_QUOTA_PROG -x -c "project -s -p $restore_dir/32lessv2 2123456789" \
+ $SCRATCH_MNT >> $seq.full
+echo "The restored file system + one additional file:"
+$XFS_IO_PROG -r -c "lsproj" $restore_dir/16less
+$XFS_IO_PROG -r -c "lsproj" $restore_dir/32less
+$XFS_IO_PROG -r -c "lsproj" $restore_dir/32lessv2
+
+umount $SCRATCH_MNT
+
+# Now, we can examine the file systems with xfs_db
+echo "These two values of 16bit project quota ids shall be the same"
+_print_projid $inode16a
+_print_projid $inode16b
+
+echo "These three values of 32bit project quota ids shall be the same"
+_print_projid $inode32b
+_print_projid $inode32a
+_print_projid $inode32v2
+
+status=0
+exit
diff --git a/285.out b/285.out
new file mode 100644
index 0000000..e5cc325
--- /dev/null
+++ b/285.out
@@ -0,0 +1,23 @@
+QA output created by 285
+No 32bit project quotas:
+projid = 1234
+projid = 0
+With 32bit project quota support:
+projid = 1234
+projid = 2123456789
+The restored file system + one additional file:
+projid = 1234
+projid = 2123456789
+projid = 2123456789
+These two values of 16bit project quota ids shall be the same
+core.projid_lo = 1234
+core.projid_hi = 0
+core.projid_lo = 1234
+core.projid_hi = 0
+These three values of 32bit project quota ids shall be the same
+core.projid_lo = 24853
+core.projid_hi = 32401
+core.projid_lo = 24853
+core.projid_hi = 32401
+core.projid_lo = 24853
+core.projid_hi = 32401
diff --git a/group b/group
index 104ed35..bbc74fe 100644
--- a/group
+++ b/group
@@ -403,3 +403,4 @@ deprecated
282 dump ioctl auto quick
283 dump ioctl auto quick
284 auto
+285 auto dump quota
--
1.7.1
_______________________________________________
xfs mailing list
xfs@xxxxxxxxxxx
http://oss.sgi.com/mailman/listinfo/xfs
