On Mon, Jul 18, 2011 at 12:22:26PM +1000, Dave Chinner wrote:
> On Fri, Jul 15, 2011 at 12:22:26PM +1000, Dave Chinner wrote:
> > On Thu, Jul 14, 2011 at 01:46:34PM +0900, KAMEZAWA Hiroyuki wrote:
> > > On Thu, 14 Jul 2011 00:46:43 -0400
> > > Christoph Hellwig <hch@xxxxxxxxxxxxx> wrote:
> > >
> > > > On Thu, Jul 14, 2011 at 10:38:01AM +0900, KAMEZAWA Hiroyuki wrote:
> > > > > > + /*
> > > > > > + * Only kswapd can writeback filesystem pages to
> > > > > > + * avoid risk of stack overflow
> > > > > > + */
> > > > > > + if (page_is_file_cache(page) && !current_is_kswapd()) {
> > > > > > + inc_zone_page_state(page, NR_VMSCAN_WRITE_SKIP);
> > > > > > + goto keep_locked;
> > > > > > + }
> > > > > > +
> > > > >
> > > > >
> > > > > This will cause tons of memcg OOM kill because we have no help of kswapd (now).
> > > >
> > > > XFS and btrfs already disable writeback from memcg context, as does ext4
> > > > for the typical non-overwrite workloads, and none has fallen apart.
> > > >
> > > > In fact there's no way we can enable them as the memcg calling contexts
> > > > tend to have massive stack usage.
> > > >
> > >
> > > Hmm, XFS/btrfs adds pages to radix-tree in deep stack ?
> >
> > Here's an example writeback stack trace. Notice how deep it is from
> > the __writepage() call?
> ....
> >
> > So from ->writepage, there is about 3.5k of stack usage here. 2.5k
> > of that is in XFS, and the worst I've seen is around 4k before
> > getting to the IO subsystem, which in the worst case I've seen
> > consumed 2.5k of stack. IOWs, I've seen stack usage from .writepage
> > down to IO take over 6k of stack space on x86_64....
>
> BTW, here's a stack frame that indicates swap IO:
>
> dave@test-4:~$ cat /sys/kernel/debug/tracing/stack_trace
> Depth Size Location (46 entries)
> ----- ---- --------
> 0) 5080 40 zone_statistics+0xad/0xc0
> 1) 5040 272 get_page_from_freelist+0x2ad/0x7e0
> 2) 4768 288 __alloc_pages_nodemask+0x133/0x7b0
> 3) 4480 48 kmem_getpages+0x62/0x160
> 4) 4432 112 cache_grow+0x2d1/0x300
> 5) 4320 80 cache_alloc_refill+0x219/0x260
> 6) 4240 64 kmem_cache_alloc+0x182/0x190
> 7) 4176 16 mempool_alloc_slab+0x15/0x20
> 8) 4160 144 mempool_alloc+0x63/0x140
> 9) 4016 16 scsi_sg_alloc+0x4c/0x60
> 10) 4000 112 __sg_alloc_table+0x66/0x140
> 11) 3888 32 scsi_init_sgtable+0x33/0x90
> 12) 3856 48 scsi_init_io+0x31/0xc0
> 13) 3808 32 scsi_setup_fs_cmnd+0x79/0xe0
> 14) 3776 112 sd_prep_fn+0x150/0xa90
> 15) 3664 64 blk_peek_request+0xc7/0x230
> 16) 3600 96 scsi_request_fn+0x68/0x500
> 17) 3504 16 __blk_run_queue+0x1b/0x20
> 18) 3488 96 __make_request+0x2cb/0x310
> 19) 3392 192 generic_make_request+0x26d/0x500
> 20) 3200 96 submit_bio+0x64/0xe0
> 21) 3104 48 swap_writepage+0x83/0xd0
> 22) 3056 112 pageout+0x122/0x2f0
> 23) 2944 192 shrink_page_list+0x458/0x5f0
> 24) 2752 192 shrink_inactive_list+0x1ec/0x410
> 25) 2560 224 shrink_zone+0x468/0x500
> 26) 2336 144 do_try_to_free_pages+0x2b7/0x3f0
> 27) 2192 176 try_to_free_pages+0xa4/0x120
> 28) 2016 288 __alloc_pages_nodemask+0x43f/0x7b0
> 29) 1728 48 kmem_getpages+0x62/0x160
> 30) 1680 128 fallback_alloc+0x192/0x240
> 31) 1552 96 ____cache_alloc_node+0x9a/0x170
> 32) 1456 16 __kmalloc+0x17d/0x200
> 33) 1440 128 kmem_alloc+0x77/0xf0
> 34) 1312 128 xfs_log_commit_cil+0x95/0x3d0
> 35) 1184 96 _xfs_trans_commit+0x1e9/0x2a0
> 36) 1088 208 xfs_create+0x57a/0x640
> 37) 880 96 xfs_vn_mknod+0xa1/0x1b0
> 38) 784 16 xfs_vn_create+0x10/0x20
> 39) 768 64 vfs_create+0xb1/0xe0
> 40) 704 96 do_last+0x5f5/0x770
> 41) 608 144 path_openat+0xd5/0x400
> 42) 464 224 do_filp_open+0x49/0xa0
> 43) 240 96 do_sys_open+0x107/0x1e0
> 44) 144 16 sys_open+0x20/0x30
> 45) 128 128 system_call_fastpath+0x16/0x1b
>
>
> That's pretty damn bad. From kmem_alloc to the top of the stack is
> more than 3.5k through the direct reclaim swap IO path. That, to me,
> kind of indicates that even doing swap IO on dirty anonymous pages
> from direct reclaim risks overflowing the 8k stack on x86_64....
>
> Umm, hold on a second, WTF is my standard create-lots-of-zero-length
> inodes-in-parallel doing swapping? Oh, shit, it's also running about
> 50% slower (50-60k files/s instead of 110-120l files/s)....
It's the memory demand caused by the stack tracer causing the
swapping, and the slowdown is just the overhead of tracer. 2.6.38
doesn't swap very much at all, 2.6.39 swaps a bit more more and
3.0-rc7 is about the same....
IOWs the act of measuring stack usage causes the worst case stack
usage for that workload on 2.6.39 and 3.0-rc7.
Cheers,
Dave
--
Dave Chinner
david@xxxxxxxxxxxxx
_______________________________________________
xfs mailing list
xfs@xxxxxxxxxxx
http://oss.sgi.com/mailman/listinfo/xfs
