On Tue, Jun 28, 2011 at 11:33:19AM -0400, Josef Bacik wrote:
> This is a test to make sure seek_data/seek_hole is acting like it does on
> Solaris. It will check to see if the fs supports finding a hole or not and will
> adjust as necessary.
So I just looked at this with an eye to validating an XFS
implementation, and I came up with this list of stuff that the test
does not cover that I'd need to test in some way:
- files with clean unwritten extents. Are they a hole or
data? What's SEEK_DATA supposed to return on layout like
hole-unwritten-data? i.e. needs to add fallocate to the
picture...
- files with dirty unwritten extents (i.e. dirty in memory,
not on disk). They are most definitely data, and most
filesystems will need a separate lookup path to detect
dirty unwritten ranges because the state is kept
separately (page cache vs extent cache). Plenty of scope
for filesystem specific bugs here so needs a roubust test.
- cold cache behaviour - all dirty data ranges the test
creates are hot in cache and not even forced to disk, so
it is not testing the no-page-cache-over-the-data-range
case. i.e. it tests delalloc state tracking but not
data-extent-already exists lookups during a seek.
- assumes that allocation size is the block size and that
holes follows block size alignment. We already know that
ext4 does not follow that rule when doing small sparse
writes close together in a file, and XFS is also known to
fill holes when doing sparse writes past EOF.
- only tests single block data extents ѕo doesn't cover
corner cases like skipping over multiple fragmented data
extents to the next hole.
Some more comments in line....
> +_cleanup()
> +{
> + rm -f $tmp.*
> +}
> +
> +trap "_cleanup ; exit \$status" 0 1 2 3 15
> +
> +# get standard environment, filters and checks
> +. ./common.rc
> +. ./common.filter
> +
> +# real QA test starts here
> +_supported_fs generic
> +_supported_os Linux
> +
> +testfile=$TEST_DIR/seek_test.$$
> +logfile=$TEST_DIR/seek_test.$$.log
The log file is usually named $seq.full, and doesn't get placed in
the filesystem being tested. It gets saved in the xfstests directory
along side $seq.out.bad for analysis whenteh test fails...
> +[ -x $here/src/seek-tester ] || _notrun "seek-tester not built"
> +
> +_cleanup()
> +{
> + rm -f $testfile
> + rm -f $logfile
> +}
> +trap "_cleanup; exit \$status" 0 1 2 3 15
> +
> +echo "Silence is golden"
> +$here/src/seek-tester -q $testfile 2>&1 | tee -a $logfile
Personally I'd prefer the test to be a bit noisy about what it is
running, especially when there are so many subtests the single
invocation is running. It makes no difference to the run time ofthe
test, or the output when something fails, but it at least allows you
to run the test manually and see what it is doing easily...
> +
> +if grep -q "SEEK_HOLE is not supported" $logfile; then
> + _notrun "SEEK_HOLE/SEEK_DATA not supported by this kernel"
> +fi
> +
> +rm -f $logfile
> +rm -f $testfile
> +
> +status=0 ; exit
> diff --git a/255.out b/255.out
> new file mode 100644
> index 0000000..7eefb82
> --- /dev/null
> +++ b/255.out
> @@ -0,0 +1,2 @@
> +QA output created by 255
> +Silence is golden
> diff --git a/group b/group
> index 1f86075..c045e70 100644
> --- a/group
> +++ b/group
> @@ -368,3 +368,4 @@ deprecated
> 252 auto quick prealloc
> 253 auto quick
> 254 auto quick
> +255 auto quick
I'd suggest that rw and prealloc (once unwritten extent
testing is added) groups should also be defined for this test.
Otherwise, the test code looks ok if a bit over-engineered....
> +struct testrec {
> + int test_num;
> + int (*test_func)(int fd, int testnum);
> + char *test_desc;
> +};
> +
> +struct testrec seek_tests[] = {
> + { 1, test01, "Test basic support" },
> + { 2, test02, "Test an empty file" },
> + { 3, test03, "Test a full file" },
> + { 4, test04, "Test file hole at beg, data at end" },
> + { 5, test05, "Test file data at beg, hole at end" },
> + { 6, test06, "Test file hole data hole data" },
So, to take from the hole punch test matrix, it covers a bunch more
file state transitions and cases that are just as relevant to
SEEK_HOLE/SEEK_DATA. Those cases are:
# 1. into a hole
# 2. into allocated space
# 3. into unwritten space
# 4. hole -> data
# 5. hole -> unwritten
# 6. data -> hole
# 7. data -> unwritten
# 8. unwritten -> hole
# 9. unwritten -> data
# 10. hole -> data -> hole
# 11. data -> hole -> data
# 12. unwritten -> data -> unwritten
# 13. data -> unwritten -> data
# 14. data -> hole @ EOF
# 15. data -> hole @ 0
# 16. data -> cache cold ->hole
# 17. data -> hole in single block file
I thikn we also need to cover most of these same cases, right? And
SEEK_HOLE/SEEK data also need to explicitly separate the unwritten
tests into "clean unwritten" and "dirty unwritten" and cover the
transitions between regions of those states as well, right?
Cheers,
Dave.
--
Dave Chinner
david@xxxxxxxxxxxxx
_______________________________________________
xfs mailing list
xfs@xxxxxxxxxxx
http://oss.sgi.com/mailman/listinfo/xfs
