This patch adds additional punch hole tests to 252
that were used to test ext4 punch hole. The _test_generic_punch
routine has been modified to accept two new flags:
-k To keep the test file between tests.
This will test the handling of existing holes
-d To not sync the file between tests.
This will test the handling of delayed extents
Four new corner cases have also been added to the routine:
14. data -> hole @ EOF
15. data -> hole @ 0
16. data -> cache cold ->hole
17. data -> hole in single block file
Signed-off-by: Allison Henderson <achender@xxxxxxxxxx>
---
:100755 100755 dfdf3f8... 5efa243... M 252
:100644 100644 cd8e4b4... 930c924... M 252.out
:100644 100644 e2da5d8... ddf63b0... M common.punch
252 | 10 +++
252.out | 192 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
common.punch | 150 ++++++++++++++++++++++++++++++++++++++-------
3 files changed, 330 insertions(+), 22 deletions(-)
diff --git a/252 b/252
index dfdf3f8..5efa243 100755
--- a/252
+++ b/252
@@ -52,6 +52,16 @@ _require_xfs_io_fiemap
testfile=$TEST_DIR/252.$$
+# Standard punch hole tests
_test_generic_punch falloc fpunch fpunch fiemap _filter_fiemap $testfile -F
+# Delayed allocation punch hole tests
+_test_generic_punch -d falloc fpunch fpunch fiemap _filter_fiemap $testfile -F
+
+# Multi hole punch tests
+_test_generic_punch -k falloc fpunch fpunch fiemap _filter_fiemap $testfile -F
+
+# Delayed allocation multi punch hole tests
+_test_generic_punch -d -k falloc fpunch fpunch fiemap _filter_fiemap $testfile -F
+
status=0 ; exit
diff --git a/252.out b/252.out
index cd8e4b4..930c924 100644
--- a/252.out
+++ b/252.out
@@ -45,3 +45,195 @@ QA output created by 252
0: [0..7]: data
1: [8..31]: hole
2: [32..39]: data
+ 14. data -> hole @ EOF
+0: [0..23]: data
+1: [24..39]: hole
+ 15. data -> hole @ 0
+0: [0..15]: hole
+1: [16..39]: data
+ 16. data -> cache cold ->hole
+0: [0..15]: hole
+1: [16..39]: data
+ 17. data -> hole in single block file
+0: [0..7]: data
+ 1. into a hole
+ 2. into allocated space
+0: [0..7]: data
+1: [8..23]: hole
+2: [24..39]: data
+ 3. into unwritten space
+0: [0..7]: unwritten
+1: [8..23]: hole
+2: [24..39]: unwritten
+ 4. hole -> data
+0: [0..23]: hole
+1: [24..31]: data
+2: [32..39]: hole
+ 5. hole -> unwritten
+0: [0..23]: hole
+1: [24..31]: unwritten
+2: [32..39]: hole
+ 6. data -> hole
+0: [0..7]: data
+1: [8..39]: hole
+ 7. data -> unwritten
+0: [0..7]: data
+1: [8..23]: hole
+2: [24..31]: unwritten
+3: [32..39]: hole
+ 8. unwritten -> hole
+0: [0..7]: unwritten
+1: [8..39]: hole
+ 9. unwritten -> data
+0: [0..7]: unwritten
+1: [8..23]: hole
+2: [24..31]: data
+3: [32..39]: hole
+ 10. hole -> data -> hole
+ 11. data -> hole -> data
+0: [0..7]: data
+1: [8..31]: hole
+2: [32..39]: data
+ 12. unwritten -> data -> unwritten
+0: [0..7]: unwritten
+1: [8..31]: hole
+2: [32..39]: unwritten
+ 13. data -> unwritten -> data
+0: [0..7]: data
+1: [8..31]: hole
+2: [32..39]: data
+ 14. data -> hole @ EOF
+0: [0..23]: data
+1: [24..39]: hole
+ 15. data -> hole @ 0
+0: [0..15]: hole
+1: [16..39]: data
+ 16. data -> cache cold ->hole
+0: [0..15]: hole
+1: [16..39]: data
+ 17. data -> hole in single block file
+0: [0..7]: data
+ 1. into a hole
+0: [0..7]: data
+1: [8..39]: hole
+ 2. into allocated space
+0: [0..7]: data
+1: [8..23]: hole
+2: [24..39]: data
+ 3. into unwritten space
+0: [0..7]: data
+1: [8..23]: hole
+2: [24..39]: data
+ 4. hole -> data
+0: [0..7]: data
+1: [8..23]: hole
+2: [24..39]: data
+ 5. hole -> unwritten
+0: [0..7]: data
+1: [8..23]: hole
+2: [24..39]: data
+ 6. data -> hole
+0: [0..7]: data
+1: [8..23]: hole
+2: [24..39]: data
+ 7. data -> unwritten
+0: [0..7]: data
+1: [8..23]: hole
+2: [24..39]: data
+ 8. unwritten -> hole
+0: [0..7]: data
+1: [8..23]: hole
+2: [24..39]: data
+ 9. unwritten -> data
+0: [0..7]: data
+1: [8..23]: hole
+2: [24..39]: data
+ 10. hole -> data -> hole
+0: [0..7]: data
+1: [8..31]: hole
+2: [32..39]: data
+ 11. data -> hole -> data
+0: [0..7]: data
+1: [8..31]: hole
+2: [32..39]: data
+ 12. unwritten -> data -> unwritten
+0: [0..7]: data
+1: [8..31]: hole
+2: [32..39]: data
+ 13. data -> unwritten -> data
+0: [0..7]: data
+1: [8..31]: hole
+2: [32..39]: data
+ 14. data -> hole @ EOF
+0: [0..23]: data
+1: [24..39]: hole
+ 15. data -> hole @ 0
+0: [0..15]: hole
+1: [16..39]: data
+ 16. data -> cache cold ->hole
+0: [0..15]: hole
+1: [16..39]: data
+ 17. data -> hole in single block file
+0: [0..7]: data
+ 1. into a hole
+0: [0..7]: data
+1: [8..39]: hole
+ 2. into allocated space
+0: [0..7]: data
+1: [8..23]: hole
+2: [24..39]: data
+ 3. into unwritten space
+0: [0..7]: data
+1: [8..23]: hole
+2: [24..39]: data
+ 4. hole -> data
+0: [0..7]: data
+1: [8..23]: hole
+2: [24..39]: data
+ 5. hole -> unwritten
+0: [0..7]: data
+1: [8..23]: hole
+2: [24..39]: data
+ 6. data -> hole
+0: [0..7]: data
+1: [8..23]: hole
+2: [24..39]: data
+ 7. data -> unwritten
+0: [0..7]: data
+1: [8..23]: hole
+2: [24..39]: data
+ 8. unwritten -> hole
+0: [0..7]: data
+1: [8..23]: hole
+2: [24..39]: data
+ 9. unwritten -> data
+0: [0..7]: data
+1: [8..23]: hole
+2: [24..39]: data
+ 10. hole -> data -> hole
+0: [0..7]: data
+1: [8..31]: hole
+2: [32..39]: data
+ 11. data -> hole -> data
+0: [0..7]: data
+1: [8..31]: hole
+2: [32..39]: data
+ 12. unwritten -> data -> unwritten
+0: [0..7]: data
+1: [8..31]: hole
+2: [32..39]: data
+ 13. data -> unwritten -> data
+0: [0..7]: data
+1: [8..31]: hole
+2: [32..39]: data
+ 14. data -> hole @ EOF
+0: [0..23]: data
+1: [24..39]: hole
+ 15. data -> hole @ 0
+0: [0..15]: hole
+1: [16..39]: data
+ 16. data -> cache cold ->hole
+0: [0..15]: hole
+1: [16..39]: data
+ 17. data -> hole in single block file
+0: [0..7]: data
diff --git a/common.punch b/common.punch
index e2da5d8..ddf63b0 100644
--- a/common.punch
+++ b/common.punch
@@ -256,8 +256,39 @@ die_now()
# 11. data -> hole -> data
# 12. unwritten -> data -> unwritten
# 13. data -> unwritten -> data
+# 14. data -> hole @ EOF
+# 15. data -> hole @ 0
+# 16. data -> cache cold ->hole
+# 17. data -> hole in single block file
+#
+# Test file is removed, created and sync'd between tests.
+#
+# Use -k flag to keep the file between tests. This will
+# test the handling of pre-existing holes.
+#
+# Use the -d flag to not sync the file between tests.
+# This will test the handling of delayed extents
+#
_test_generic_punch()
{
+
+ remove_testfile=1
+ sync_cmd="-c fsync"
+ OPTIND=1
+ while getopts 'dk' OPTION
+ do
+ case $OPTION in
+ k) remove_testfile=
+ ;;
+ d) sync_cmd=
+ ;;
+ ?) echo Invalid flag
+ exit 1
+ ;;
+ esac
+ done
+ shift $(($OPTIND - 1))
+
alloc_cmd=$1
punch_cmd=$2
zero_cmd=$3 #if not testing zero just set to punch
@@ -267,22 +298,28 @@ _test_generic_punch()
xfs_io_opt=$7 #needs to be -F if not testing xfs
echo " 1. into a hole"
- rm -f $testfile
+ if [ "$remove_testfile" ]; then
+ rm -f $testfile
+ fi
$XFS_IO_PROG $xfs_io_opt -f -c "truncate 20k" \
-c "$zero_cmd 4k 8k" \
-c "$map_cmd -v" $testfile | $filter_cmd
[ $? -ne 0 ] && die_now
echo " 2. into allocated space"
- rm -f $testfile
+ if [ "$remove_testfile" ]; then
+ rm -f $testfile
+ fi
$XFS_IO_PROG $xfs_io_opt -f -c "truncate 20k" \
- -c "pwrite 0 20k" -c "fsync" \
+ -c "pwrite 0 20k" $sync_cmd \
-c "$zero_cmd 4k 8k" \
-c "$map_cmd -v" $testfile | $filter_cmd
[ $? -ne 0 ] && die_now
echo " 3. into unwritten space"
- rm -f $testfile
+ if [ "$remove_testfile" ]; then
+ rm -f $testfile
+ fi
$XFS_IO_PROG $xfs_io_opt -f -c "truncate 20k" \
-c "$alloc_cmd 0 20k" \
-c "$zero_cmd 4k 8k" \
@@ -290,15 +327,19 @@ _test_generic_punch()
[ $? -ne 0 ] && die_now
echo " 4. hole -> data"
- rm -f $testfile
+ if [ "$remove_testfile" ]; then
+ rm -f $testfile
+ fi
$XFS_IO_PROG $xfs_io_opt -f -c "truncate 20k" \
- -c "pwrite 8k 8k" -c "fsync" \
+ -c "pwrite 8k 8k" $sync_cmd \
-c "$zero_cmd 4k 8k" \
-c "$map_cmd -v" $testfile | $filter_cmd
[ $? -ne 0 ] && die_now
echo " 5. hole -> unwritten"
- rm -f $testfile
+ if [ "$remove_testfile" ]; then
+ rm -f $testfile
+ fi
$XFS_IO_PROG $xfs_io_opt -f -c "truncate 20k" \
-c "$alloc_cmd 8k 8k" \
-c "$zero_cmd 4k 8k" \
@@ -306,24 +347,30 @@ _test_generic_punch()
[ $? -ne 0 ] && die_now
echo " 6. data -> hole"
- rm -f $testfile
+ if [ "$remove_testfile" ]; then
+ rm -f $testfile
+ fi
$XFS_IO_PROG $xfs_io_opt -f -c "truncate 20k" \
- -c "pwrite 0 8k" -c "fsync" \
+ -c "pwrite 0 8k" $sync_cmd \
-c "$zero_cmd 4k 8k" \
-c "$map_cmd -v" $testfile | $filter_cmd
[ $? -ne 0 ] && die_now
echo " 7. data -> unwritten"
- rm -f $testfile
+ if [ "$remove_testfile" ]; then
+ rm -f $testfile
+ fi
$XFS_IO_PROG $xfs_io_opt -f -c "truncate 20k" \
- -c "pwrite 0 8k" -c "fsync" \
+ -c "pwrite 0 8k" $sync_cmd \
-c "$alloc_cmd 8k 8k" \
-c "$zero_cmd 4k 8k" \
-c "$map_cmd -v" $testfile | $filter_cmd
[ $? -ne 0 ] && die_now
echo " 8. unwritten -> hole"
- rm -f $testfile
+ if [ "$remove_testfile" ]; then
+ rm -f $testfile
+ fi
$XFS_IO_PROG $xfs_io_opt -f -c "truncate 20k" \
-c "$alloc_cmd 0 8k" \
-c "$zero_cmd 4k 8k" \
@@ -331,49 +378,108 @@ _test_generic_punch()
[ $? -ne 0 ] && die_now
echo " 9. unwritten -> data"
- rm -f $testfile
+ if [ "$remove_testfile" ]; then
+ rm -f $testfile
+ fi
$XFS_IO_PROG $xfs_io_opt -f -c "truncate 20k" \
-c "$alloc_cmd 0 8k" \
- -c "pwrite 8k 8k" -c "fsync" \
+ -c "pwrite 8k 8k" $sync_cmd \
-c "$zero_cmd 4k 8k" \
-c "$map_cmd -v" $testfile | $filter_cmd
[ $? -ne 0 ] && die_now
echo " 10. hole -> data -> hole"
- rm -f $testfile
+ if [ "$remove_testfile" ]; then
+ rm -f $testfile
+ fi
$XFS_IO_PROG $xfs_io_opt -f -c "truncate 20k" \
- -c "pwrite 8k 4k" -c "fsync" \
+ -c "pwrite 8k 4k" $sync_cmd \
-c "$zero_cmd 4k 12k" \
-c "$map_cmd -v" $testfile | $filter_cmd
[ $? -ne 0 ] && die_now
echo " 11. data -> hole -> data"
- rm -f $testfile
+ if [ "$remove_testfile" ]; then
+ rm -f $testfile
+ fi
$XFS_IO_PROG $xfs_io_opt -f -c "truncate 20k" \
-c "$alloc_cmd 0 20k" \
-c "pwrite 0 8k" \
- -c "pwrite 12k 8k" -c "fsync" \
+ -c "pwrite 12k 8k" $sync_cmd \
-c "$punch_cmd 8k 4k" \
-c "$zero_cmd 4k 12k" \
-c "$map_cmd -v" $testfile | $filter_cmd
[ $? -ne 0 ] && die_now
echo " 12. unwritten -> data -> unwritten"
- rm -f $testfile
+ if [ "$remove_testfile" ]; then
+ rm -f $testfile
+ fi
$XFS_IO_PROG $xfs_io_opt -f -c "truncate 20k" \
-c "$alloc_cmd 0 20k" \
- -c "pwrite 8k 4k" -c "fsync" \
+ -c "pwrite 8k 4k" $sync_cmd \
-c "$zero_cmd 4k 12k" \
-c "$map_cmd -v" $testfile | $filter_cmd
[ $? -ne 0 ] && die_now
echo " 13. data -> unwritten -> data"
- rm -f $testfile
+ if [ "$remove_testfile" ]; then
+ rm -f $testfile
+ fi
$XFS_IO_PROG $xfs_io_opt -f -c "truncate 20k" \
-c "$alloc_cmd 0 20k" \
- -c "pwrite 0k 8k" -c "fsync" \
+ -c "pwrite 0k 8k" $sync_cmd \
-c "pwrite 12k 8k" -c "fsync" \
-c "$zero_cmd 4k 12k" \
-c "$map_cmd -v" $testfile | $filter_cmd
[ $? -ne 0 ] && die_now
+
+ echo " 14. data -> hole @ EOF"
+ rm -f $testfile
+ $XFS_IO_PROG $xfs_io_opt -f -c "truncate 20k" \
+ -c "pwrite 0 20k" $sync_cmd \
+ -c "$zero_cmd 12k 8k" \
+ -c "$map_cmd -v" $testfile | $filter_cmd
+ [ $? -ne 0 ] && die_now
+
+ echo " 15. data -> hole @ 0"
+ if [ "$remove_testfile" ]; then
+ rm -f $testfile
+ fi
+ $XFS_IO_PROG $xfs_io_opt -f -c "truncate 20k" \
+ -c "pwrite 0 20k" $sync_cmd \
+ -c "$zero_cmd 0k 8k" \
+ -c "$map_cmd -v" $testfile | $filter_cmd
+ [ $? -ne 0 ] && die_now
+
+ echo " 16. data -> cache cold ->hole"
+ if [ "$remove_testfile" ]; then
+ rm -f $testfile
+ rm -f $testfile.2
+ else
+ cp $testfile $testfile.2
+ fi
+ $XFS_IO_PROG $xfs_io_opt -f -c "truncate 20k" \
+ -c "pwrite 8k 12k" -c "fsync" $testfile.2 \
+ > /dev/null
+ $XFS_IO_PROG $xfs_io_opt -f -c "truncate 20k" \
+ -c "pwrite 0 20k" $sync_cmd \
+ -c "$zero_cmd 0k 8k" \
+ -c "fadvise -d" \
+ -c "$map_cmd -v" $testfile | $filter_cmd
+ diff $testfile $testfile.2
+ [ $? -ne 0 ] && die_now
+ rm -f $testfile.2
+
+ echo " 17. data -> hole in single block file"
+ if [ "$remove_testfile" ]; then
+ rm -f $testfile
+ fi
+ block_size=`stat -f $TEST_DEV | grep "Block size" | cut -d " " -f3`
+ $XFS_IO_PROG $xfs_io_opt -f -c "truncate $block_size" \
+ -c "pwrite 0 $block_size" $sync_cmd \
+ -c "$zero_cmd 128 128" \
+ -c "$map_cmd -v" $testfile | $filter_cmd
+ [ $? -ne 0 ] && die_now
+
}
--
1.7.1
_______________________________________________
xfs mailing list
xfs@xxxxxxxxxxx
http://oss.sgi.com/mailman/listinfo/xfs
